Shop by vehicle
Heavy duty rear prop shaft with 25° articulation angle - rear axle - Defender 90 Td5/Tdi up tp MY07
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 90 Td5/Tdi from model year 2007 onwards Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90 Td5/Tdi up to MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Towing Hitch for Land Rover Defender 110/130 - Td4 / Td5
Robust Towbar for your Land Rover Defender 110/130 (Td4/Td5) - Ready for any Adventure! Are you looking for a reliable towbar for your Defender that can handle heavy loads? Then this towbar is exactly what you need! Specifically designed for the Land Rover Defender 110 and 130 models (Td4 and Td5), it offers you the trusted Nakatanenga quality and robustness for your off-road trips and everyday hauling. What makes this towbar stand out: Strong Performance: With a maximum towing capacity of up to 3.5 tons, you can easily pull larger trailers. Complete Set: It comes complete with a towball, so you're ready to go right away. Tested Safety: The towbar is E-approved, meeting all relevant safety standards. Choose Your Connection: Decide between a 7-pin or a 13-pin electrical kit with a multi-connector, depending on what you need for your trailers. Perfect Fit: Designed for all Defender 110 / 130 Td5 / Td4 models. Whether you want to transport wood for your next project, take your boat to the lake, or head off on holiday with your caravan – you can rely on this towbar. Order your towbar now and make your Defender even more versatile!
Prices incl. VAT;
LOF POWERspec, ventilated front brake kit for Isuzu D-MAX, various versions
Isuzu D-Max POWERspec ventilated front brake kit The LOF POWERspec brake kit is designed for the heavily loaded Isuzu D-Max. Our brake discs and pads meet the OEM specification and meet the same quality and tolerance as original brake components. Our POWERspec kits come complete with fitting kit, including fasteners, bolts, anti-rattle washers and the appropriate grease if required! Brake disks: Dimpled and grooved, with black phosphate coating for corrosion protection and removal of dirt and heat. Pads: High performance organic/ceramic friction material. R90-approved brake pads for use in Europe and the rest of the world! POWERspec pads: We have developed the LOF POWERspec brake range for tuned and modified heavy-duty trucks. High braking effect, improved coefficient of friction (0.47). Designed for fast driving, for stopping heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers to reduce noise. The pads are uncoated, minimal break-in required. The pads have a noise-reducing coating on the back. Scope of delivery in the kit: 2x LOF POWERspec high carbon front brake discs - with indentations, grooves and black phosphate coating 4x LOF POWERspec brake pads, performance high-speed road friction with mechanical wear indicator 4x brake calliper side parts with rubber sleeves 4x brake calliper sliding bolts 4x brake pad retaining clips, if available 2x bag of LOF Ceratec brake grease Disc dimensions 2.5 DiTD (MY 2006-2012): Diameter: 280 mm Thickness: 27 mm Height: 40 mm Center bore: 88 mm Disc dimensions 2.5 CRDi (MY 2012-2017): Diameter: 300 mm Thickness: 27 mm Height: 40mm Center hole: 88 mm Disc dimensions 1.9 CRDi (MY 2017-2021): Diameter: 300 mm Thickness: 27 mm Height: 40mm Center hole: 88 mm
Prices incl. VAT;
Upholstery Kit for Land Rover Defender Td4
Upholstery Kit for Land Rover Defender Td4 Retrim Kit for repairing a front seat on Land Rover Defender 90/110/130, incl. cover fabric, foam, spray adhesive and fitting instructions, cover fabric: Black Span - Mondus or Black Mesh. The repair kit for a front seat includes everything necessary for the renewal of the cover and upholstery (incl. spray adhesive). The Black Span - Mondus / Black Mesh cover fabric corresponds to the original fabric of the OEM seats. Note: the headrest cover is not included in the scope of delivery.
Prices incl. VAT;
Nakatanenga Mudguard Dust Box
Nakatanenga Mudguard Stowage Box The Nakatanenga mudguard storage boxes for the Land Rover Defender 90 / 110 are very light thanks to the case construction used, yet robust - an ideal combination for any touring vehicle! In addition, there are very high-quality fittings with field-proven performance features and great flexibility in design. We offer the box in two lengths as standard. The short design (630 mm length) is intended for the right-hand side of the Defender. The long design (900 mm length) is used on the left-hand side. If an internal roll cage is fitted, a mudguard stowage box can still be fitted: no modification is necessary on the right side due to the tank connection, the short box is used on the left. If you need special lengths or already have other installations in the rear of the vehicle, please contact us - we can work out very flexible solutions for you! Dimensions:Length: either 630 or 900 mmTotal height: 450 mm (400 mm storage box, 50 mm lid)Depth: 225 mm (at the foot 340 mm)Weight: approx.11 kg The aluminium profiles, which allow rivet-free assembly and thus ensure an elegant appearance, are anodised, the corners are made of a robust grey plastic. The surfaces of the storage box are made of 6.9 mm thick birch plywood, a material that combines high robustness and low weight. It is made with a D4 adhesive which, according to DIN/EN204, is "suitable for indoor use with frequent and long-lasting exposure to run-off water or condensation". The wood is colour-coated with PVC and covered with a counterfoil. We currently offer the mudguard stowage box in four colour variants: black grey slate grey petrol Other colours are available on request - please enquire: blue sky blue navy night blue red bordeaux orange yellow white silver aluminium stucco The hinges and latches come from the professional audio and studio sector and are designed for years of use under the toughest conditions. The butterfly latches keep the box securely closed without rattling, while sturdy uprights prevent the lid from folding shut - your fingers will thank you! An optional padlock can be fitted on request. Delivery includes mounting material. Existing screw holes on the vehicle are used for mounting, these must be drilled on the box. An adapter is supplied for wheel housings from model year 2007. This item is bulky goods.
Prices incl. VAT;
LOF POWERspec, ventilated front brake kit for Mitsubishi L200, various models
Mitsubishi L200 POWERspec ventilated front brake kit The LOF POWERspec brake kit is designed for the heavily loaded Isuzu D-Max. Our brake discs and pads meet the OEM specification and meet the same quality and tolerance as original brake components. Our POWERspec kits come complete with fitting kit, including fasteners, bolts, anti-rattle washers and the appropriate grease if required! Brake disks: Dimpled and grooved, with black phosphate coating for corrosion protection and removal of dirt and heat. Pads: High performance organic/ceramic friction material. R90-approved brake pads for use in Europe and the rest of the world! POWERspec pads: We have developed the LOF POWERspec brake range for tuned and modified heavy-duty trucks. High braking effect, improved coefficient of friction (0.47). Designed for fast driving, for stopping heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers to reduce noise. The pads are uncoated, minimal break-in required. The pads have a noise-reducing coating on the back. Scope of delivery Kit: 2x LOF POWERspec high carbon front brake discs - with indentations, grooves and black phosphate coating 4x LOF POWERspec brake pads, performance high-speed road friction with mechanical wear indicator 4x brake calliper side parts with rubber sleeves 4x brake calliper sliding bolts 4x brake pad retaining clips, if available 2x bag of LOF Ceratec brake grease Disc dimensions L200 2.5 Di-D (2006-16): Diameter: 295 mm Thickness: 28 mm Height: 46.5 mm Center bore: 93.5 mm Disc dimensions L200 2.4 D (2015-20): Diameter: 295 mm Thickness: 28 mm Height: 46 mm Center hole: 94 mm
Prices incl. VAT;
Raised Air Intake for Land Rover Defender 200Tdi
Snorkel for Defender 200 Tdi Raised Air Intake for Land Rover Defender 200Tdi engines. Fitted to left hand side. Material: aluminium, black powder coatedDiameter: 80 mmComes with cyclonic head and stainless fitting kit for air intake. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.
Prices incl. VAT;
Solar panel for hood, 12V, for various vehicles
Solar panel for bonnet Next generation solar cells are increasingly integrated into structural components. Instead of separate, awkwardly mounted modules on the roof of a house, for example, the roof tiles themselves function as solar panels. Our PV modules for the hoods of 4x4s and vans follow this principle. While they do not yet replace the hood, they are so thin (only 3 mm) and so flexible that they precisely fit the shape of the hood – making them hard to recognize as an extra add-on. In addition, they are also extremely aerodynamic and robust enough to even step on them if needed. The hood modules for Defenders Td5 and Td4, New Defender, Jimny 2, Mercedes G-Class and Sprinter have an output of between 75 and 90 W at 12 V, depending on the model. Your only requirement is sufficient sunlight to generate enough power for the primary and secondary batteries in the car during the day. This in turn enables you to reliably operate all the devices needed in a camper or expedition vehicle: navigation and communication devices, laptop, cooking equipment, refrigerator and much more. Your equipment always remains fully functional and a sufficient charge of the starter battery is also guaranteed. Mounting the PV module and wiring it up to the batteries in the vehicle are equally easy DIY jobs. The included adhesive tape is all you need to attach the panel to the hood while the intelligent charge controller and the adapter allow for plug & play electric installation. Note: as the connection is individual, the power cables may have to be extended.
Prices incl. VAT;
LOF Clutches ROADspec Isuzu D-Max 2.5 CRDi MY2012-2017, clutch kit
ROADspec Isuzu D-Max 2.5 CRDi MY2012-2017, Clutch Kit The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original) Description Perfect for vehicles with a Stage1 map/ Towing 1x LOF HD Drive plate, fitted with Woven organic friction 1x LOF HD ROADspec clutch cover, +20% Clamp load over original 1x LOF HD release bearing 8x Clutch cover bolts, coated in loctite 1x Isuzu Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
Snorkel for New Defender
Snorkel for Land Rover New Defender, from model year 2020 The snorkel not only enables safe driving through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The raised air intake at roof height ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Prices incl. VAT;
Extended wheelarches for Land Rover Defender
Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!
Prices incl. VAT;
Injector Defender TD4 2.2 or 2.4 incl. copper sealing ring, from MY2007 onwards
Injector Vehicle: DEFENDER from MY 2007 Brand: LAND ROVER Engine: Td4 2.2 Diesel or TD4 2.4 Diesel Scope of delivery: inclusive copper sealing ring Suitable mounting brackets and screws can be found in the store. Note:To attach the 4 injection nozzles, 2 brackets and 2 screws are required for each.
Prices incl. VAT;
Lifting spring kit for LAND ROVER Discovery Sport Type LC by TREKFINDER approx. + 30 millimetres
Lifting spring set TREKFINDER for Land Rover Discovery Sport Type LC approx. +30 millimetres the ride height is approx. +30 millimetres suitable for Land Rover Discovery Sport Type LC the standard shock absorbers can still be used Scope of delivery: 4x piece TREKFINDER coil spring 1x piece TREKFINDER sticker 1x piece parts certificate
Prices incl. VAT;
Optimised Air Intake for Land Rover Defender Td4
Air intake for Land Rover Defender - performance-optimised Optimised Air Intake for Land Rover Defender Td4 for better performance of all Land Rover Defender 90/110/130 with Td4 2.4 and 2.2 engines from MY2007. This performance air intake kit completes our chiptuning and exhaust system performance modifications. We recommend the additional fitment of a performance air filter. Our air intake kit can be further upgraded with a snorkel / raised air intake. A raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow. Please note that the raised air intake / snorkel is not included and has to be ordered separately. Please choose your vehicle and desired cover.
Prices incl. VAT;
Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side.
Snorkel for Defender 300 Tdi, Td5 and Td4 Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, fitted to right-hand side. Material: aluminium, black powder coatedDiametre: 80 mmComes with cyclonic head and stainless fitting material for snorkel. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.
Prices incl. VAT;
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium
Nakatanenga underride protection for Land Rover Defender, 10mm aluminium Underride protection, 10 mm aluminium, galvanically anodised and optionally black powder-coated, side parts 8 mm, steel, galvanised and black passivated, with two integrated heavy duty recovery eyes.The underride guard is attached to the original mounting points using the original vehicle bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. Please note: The underride guard is ONLY suitable for left-hand drive vehicles!
Prices incl. VAT;
▷ Heavy Duty Clutch Kit for Defender TD5 - available here!
Heavy Duty Clutch Kit for Land Rover Defender TD5 The clutch has to transmit enormous forces, especially when shifting gears under higher loads, e.g. in trailer operation or in vehicles with increased performance. A sometimes occurring problem in connection with the original clutch of the Defender is the penetration of oil from the engine or the gearbox into the clutch bell. This oil is absorbed by the porous friction linings and repeatedly comes into contact with the friction lining surface during driving due to the frictional heat generated. As a result of the reduced frictional engagement, the friction linings generate more heat and glaze. The heat is a measure of the converted energy that is no longer available to the drive!The organic lining used in this clutch cannot absorb oil and therefore cannot vitrify. It convinces with specially adjusted friction modifiers with a soft response behaviour and enables a 100% frictional connection. It goes without saying that the pads are asbestos-free, lead-free and free of other toxic heavy metals and heavy metal compounds.Note: We also recommend replacing the old clutch slave cylinder & clutch master cylinder -> Clutch slave cylinder / clutch master cylinderComplete set consisting of automatic clutch, friction disc and release bearing.
Prices incl. VAT;
Door Hinge Set for Land Rover Defender 90, 110 and 130 from MY 1988 onwards
There are a few mods to the classic Landy that anyone can - and should - do themselves. Replacing the original Land Rover door hinges is definitely one of them, as their half-life is notoriously short. The original parts corrode, cause rust streaks on the paintwork, leak or become wobbly. Especially at the tailgate with the heavy spare wheel mounted, the load often becomes too much of a strain for the OEM parts. Sooner or later, they become a nuisance. But there is a solution: greased replacement hinges from Offroad Monkeys provide a quick and lasting remedy. Made of a high-strength aluminum-titanium alloy and sporting corrosion- and UV-resistant coating, both look and function are ensured for the long term. No more rusting, jamming or sagging hinges, guaranteed! Whether on the side doors or the cargo door, all Offroad Monkey hinges feature a few extremely clever details: Stainless steel bolts with spiral grooves for more effective greasing; removable grease nipples with grub screw replacements; exchangeable bearings/bushings and last but not least perfectly fitting seals to prevent contact corrosion and paint damage. The hinges are 100% Made in Germany, they can be completely disassembled and also be painted. Front door kit includes: 4 hinges incl. Seals Passenger back door kit includes: 4 hinges incl. Seals Tailgate kit includes: 3 hinges Mounting kit incl. Seals
Prices incl. VAT;
Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, with roll cage, fitted to right-hand side.
Snorkel for Defender 300Tdi, Td5 and Td4 with outer cage Raised Air Intake for Land Rover Defender 300Tdi, Td5 and Td4, with roll cage, fitted to right-hand side. Material: aluminium, black powder coatedDiameter: 80 mmComes with cyclonic head and stainless fitting kit for snorkel. This version is for vehicles with an external roll cage. The snorkel is fitted to the a-pillar part of the roll cage. Tested with Safety Devices and our own roll cages. For other models there might be modifications necessary. Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.
Prices incl. VAT;
Rear differential overhaul kit for Discovery 5 / Range Rover Sport from 2014 / Range Rover L405
Overhaul Kit for Rear Differential Suitable for Range Rover Sport from 2014 and Range Rover L405
Prices incl. VAT;
LOF Clutches POWERspecNissan X-Trail MKII 2.0 dCi MY2007-2014 bis 172PS), Clutch kit for rigid flywheel
POWERspec Nissan Nissan X-Trail MKII 2.0 dCi MY2007-2014 bis 172PS *148/171 BHP* Solid mass flywheel clutch kit The POWERspec is the next stage up, ideal if you use your Xtrail as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF Solid mass flywheel 1x LOF HD release bearing 8x Flywheel bolts, coated in loctite 9x Clutch cover bolts, coated in loctite 1x Nissan Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty Legal notice: Due to technical changes, noise may be generated. This is technically harmless and therefore no reason for complaint! Installation at your own risk. Without guarantee for damage to gearbox and drive train.
Prices incl. VAT;
CargoBear storage rack, interior rack for New Defender 110, from BJ 2020
CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg Please note: The storage rack is NOT suitable for the 90, 110 Defender with 7 seats (as the belt system blocks the side panels), 130.
Prices incl. VAT;
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), BJ 2018
CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), MY 2018 A volume of up to 863 liters will fit into the back of your Jimny GJ. Sounds like a lot for the size S hardcore off-roader. But wait: how much of it can you actually use? Only rarely will you load big items in one piece – let’s say a fridge for example – into the cargo space of the little 4x4 and that’s the problem. The Jimny is mostly a specialized working vehicle for farmers, forest workers and hunters. That means, there’s always lots of tools, fuels, lubricants, equipment, feed bags and dirty clothes that you don’t want to pile up on the small surface area of the cargo hold. Add animals – dead and alive – to the mix and you get the picture.Once we’ve spotted this particular problem, we immediately set to work on it and are now offering a mini-version of our CargoBear system specifically for the back of the Jimny GJ/HJ. This rack effectively partitions the narrow but high cargo space and lets you load many more items much more effectively. Rough and dirty things below, tools, equipment, jerry cans, boxes etc. on top of the shelf.As with our CargoBear roof racks, the cargo shelf is made from robust, powder-coated aluminum plates. Raised edges, non-slip perforation and a great number of lashing points guarantee 100% secure transport.When you’re installing our Tiny Bear cargo rack you can use the pre-existing screw holes. There’s no need for drilling new ones. But you should keep the spare seats in the back down or remove them entirely. Who’s packing back-seat passengers into a Jimny anyway?All fastening material is included.Material:Aluminum, powder-coated blackWeight:6,6 kgMax. load:up to 50 kg
Prices incl. VAT;
Door Hinge Set for Land Rover Defender until MY2016 and Series 3 in Polished Stainless Steel
Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.
Prices incl. VAT;
LOF Clutches POWERspec clutch TD5 for dual mass flywheel
POWERspec TD5 for clutches with dual mass flywheel At LOF Clutches, POWERspec is the next step up from ROADspec when it comes to performance. If your Td5 Defender or Discovery tows regularly or carries extra weight like expedition trucks do, then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a billet machined center hub as well as an EXTREMEspec release bearing. And by the way, the pedal weight is not heavier than the original. Perfect for vehicles with a Stage2 map/ 450Nm/ 200 bhp. Description: LOF heavy duty friction material Billet machined center hub LOF Clutches EXTREMEspec release bearing G90 High-temp assembly grease Clutch cover Nyloc fasteners 1x CNC wire-formed anti rattle clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well! Legal Disclaimer: Technical modification can result in noise generation. This is not detrimental to the vehicle’s reliability or performance and therefore no cause for complain! Modifications to the vehicle are undertaken at your own risk without warranty for any damages to transmission and drive train.
Prices incl. VAT;
Conversion kit bulkhead Land Rover New Defender 90/ 110
Bulkhead conversion kit Removing the full height bulkhead from the L663 Defender 90 and 110 'hardtop' is a popular modification, but when the factory bulkhead is removed from the vehicle, the area behind the seats looks raw and unfinished.The Bulkhead Delete Kit cleans up the front edge of the cargo area and the trim area behind the seats to create a sleek OEM interior when the bulkhead has been removed from an L663 Defender Hardtop.The partition removal kit's molded, raised lip creates a raised mini-partition that prevents objects in the rear of the vehicle from falling into the cavity behind the front seats and/or damaging the seat backs.With the partition removed, the interior of your Defender Hardtop suddenly feels lighter and airier. Items in the rear of the vehicle are easier to reach and you can adjust the seats over a wider range.The Bulkhead Delete Kit can be installed in around 30 minutes and it has been designed to utilize the existing mounting points, meaning no modifications need to be made to the interior of your Defender. This design feature also means that the installation is fully reversible at a later date. The installation kit includes 3D printed blanking plugs to cover the empty M6 fixing holes where the bulkhead brackets were attached to the B-pillar.Disclaimer: The L663 Partition Removal Kit is not intended to provide structural strength or any form of personal protection to occupants from a shifting load. It is the owner's responsibility to secure all loose items in the rear of the vehicle. Note: We are already developing a perfectly matching net as a partition wall.
Prices incl. VAT;
Air intake Bravo Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018
Snorkel for Suzuki Jimny GJ/HJ, from year of manufacture 2018 The snorkel not only enables safe passage through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Prices incl. VAT;
Snorkel for various vehicles in black
Raised air intakes for various vehicles in black The snorkel not only allows safe driving through deeper water points with reduced risk for the engine, it also brings advantages in dusty environments: The increased air intake at roof level ensures cleaner, less dusty air, the air filter must be replaced or cleaned less frequently. Available for the following vehicles:Ford Ranger PX (from BJ 2011)Nissan Navara D23 (from year 2015)Nissan Navara D40 / Pathfinder R51 (BJ 2005-2015)Toyota Hilux (BJ 2005-2015)Toyota Hilux (from BJ 2016) Please select the vehicle.
Prices incl. VAT;
Air intake Bravo snorkel for Land Rover New Defender, from MY 2020
Ready for Any Terrain? The Bravo Snorkel for Your New Defender! Do you drive a Land Rover New Defender from model year 2020 onwards and want to fully exploit its off-road capabilities? Then the Bravo Snorkel is the perfect addition to your vehicle! Protection and Performance When It Matters Most: With this high-quality air intake, you're perfectly equipped for demanding adventures. Whether you're planning deep water crossings or battling your way through dusty tracks – the Bravo Snorkel ensures your engine is always supplied with cleaner and cooler air. Master Water Crossings: The raised position of the air intake significantly reduces the risk of water entering the engine. This allows you to confidently traverse deeper fords. Dusty Environments? No Problem!: In dry, dusty areas, the air is drawn in from higher up, where it contains significantly fewer dirt particles. This protects your air filter, extends its lifespan, and ensures your engine can always "breathe" optimally. Quality and Perfect Fit for Your Defender: The Bravo Snorkel has been specifically developed for the Land Rover New Defender from model year 2020 onwards and impresses with its robust construction and excellent fit. It seamlessly integrates into the design of your vehicle and is built for durability – exactly what you need for tough off-road use. Upgrade your Defender with the Bravo Snorkel now and be ready for the next level of off-road performance and engine protection!
Prices incl. VAT;
LOF Clutches POWERspec Toyota Hilux 2.5 D-4D / 3.0 D-4D, MY2005-2015, Clutch Kit
POWERspec Toyota Hi-Lux 2.5 / 3.0 D-4D, MY2005-2015, clutch kit The POWERspec is the next stage up, ideal if you use your Toyota Hilux as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward! (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD Release bearing 9x Clutch cover bolts, coated in loctite 1x Hilux Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty
Prices incl. VAT;
LOF Clutches POWERspec clutch 200/300 TDI
POWERspec TDI 200/300Tdi At LOF Clutches, POWERspec is the next step up from ROADspec when it comes to performance. If you tow regularly or carry extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward! This kit features heavy duty friction material, a high torque sprung center hub as well as the updated release bearing and the slave cylinder for the 2.2l engine. And by the way, the pedal weight is not heavier than the original. The POWERspec clutch kit is suitable for vehicles with tuned injection pumps (boost pin/spacer), but not suitable for VNT turbo engines, please see 2.8 TGV HS INTERNATIONAL CATEGORY. Description: LOF heavy duty friction material High torque sprung center hub LOF Clutches EXTREMEspec release bearing G90 High-temp assembly grease CNC wire-formed bearing retaining clip CNC wire-formed pushrod retaining clip High tensile bolt pack for clutch cover 1x OEM spigot bush 1x OEM fork bush Pedal weight not heavier than original Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder should not be installed as well.
Prices incl. VAT;
Auxiliary Air Spring Defender 90/110/130/Discovery I/ Range Rover Classic
Air Suspension Defender 90/110/130/Discovery I/ Range Rover Classic These auxiliary air springs provide a more stable ride and noticeably improve the handling of the vehicle. Lateral roll of the vehicle is noticeably reduced. The air springs are inflated using the supplied hoses which are routed to an accessible location. A hand pump can be used for this purpose, as can a compressor, or they can simply be filled at the petrol station. They are available for Defender 90, Disovery U and Range Rover Classic or Defender 110 / 130.Supplied in pairs, the auxiliary air springs can be adjusted to suit all conceivable load and off-road conditions. Simply increase the air volume for increased load, or deflate for driving without additional load.The springs are made from durable and dimensionally stable polyurethane.Please select the vehicle.
Prices incl. VAT;