Turbocharger trunk assembly for Defender TD5 & Discovery II (TD5)
Turbocharger trunk assembly for Defender & Discovery II (2.5l TD5) This high-quality turbocharger trunk assembly is suitable for all Land Rover Defender and Discovery II models with 2.5 litre TD5 diesel engines. Ideal as a replacement for defective or worn units - for optimum performance and longevity of your vehicle.
Prices incl. VAT;
Terrafirma Steering Damper Return-to-Centre
Terrafirma Steering Damper Return-to-Centre Steering damper for Land Rover Defender 90/110/130, mounts to original mounting points, assists in self-return of steering.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, galvanized steel, 4mm
Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Performance optimisation for all Land Rover Td5 2.5
Performance tuning for all Land Rover Td5 2.5 A well-balanced tuning for your Land Rover Defender or Discovery Td5 2.5 - model year 2002-2006, which gets dormant power reserves out of the engine without damaging it. Only engines can be tuned whose control unit has an article number that begins with the numerical sequence NNN or higher (e.g. NNW)! In contrast to many others, this tuning does not aim for a maximum increase in performance, but rather an engine-friendly and at the same time clearly noticeable increase in horsepower and torque. In this way, the engine uses its full potential - this makes sense, for example, when driving frequently on the motorway. The configuration is done according to the customer's wishes - in case of special requirements: Just get in touch with us! Possible configurations: Power increase to 114KW/155PS at 330Nm Power upgrade to 129KW/175PS at 390Nm, incl. larger intercooler The price of the 175hp tuning already includes the larger intercooler. We do not offer it without it, as this would put too much thermal load on the engine. Only for motorsport, no road approval! We recommend reinforced silicone hoses & K&N exchange filters for tuning: Order silicone hoses here / Order exchange filters here. The tuning can either be done at our premises, or you can send us your engine control unit and receive it back in the shortest possible time with the performance-enhanced programming (and possibly the larger intercooler). We offer the following flat rates for the installation of the intercooler: Vehicles without air conditioning Vehicles with air conditioning Please select the desired tuning variant. After ordering, one of our employees will contact you to arrange an appointment, so please be sure to include your telephone number with your order. Please order in good time, we have approx. 4 weeks lead time for workshop appointments. Assembly is only possible on site in Berg near Neumarkt (postcode: 92348).
Prices incl. VAT;
Clutch slave cylinder for Defender TD4
Clutch slave cylinder for Defender TD4 You can choose between a clutch slave cylinder for Defender TD4 up to chassis number 8A999999 and a clutch slave cylinder for Defender TD4 from chassis number 9A000001.ATTENTION: Occasionally, different clutch release bearings may have been fitted by previous owners. If you are not sure which clutch slave cylinder you need for your release bearing, please order the other clutch slave cylinder. You can then test both and return the non-fitting part to us within 4 weeks in its original packaging.
Prices incl. VAT;
Anhängerkupplung Discovery II
Trailer coupling for Landrover Discovery II incl. E-kit, E-approved and ball head.
Prices incl. VAT;
Chequer plate supports Suzuki Jimny, type GJ / HJ
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Prices incl. VAT;
GRP bonnet "Puma" with air intake
GRP hood “Puma” with air intake he hood for all Land Rover Defender 90/110/130 (all series, TDi / TD5 / TD4 2.4 / TD4 2.2) is made of fiberglass plastic, saves weight (only approx. 15 kg) and is optionally equipped with an air intake that contributes to cooling. It is fitted with a grille that corresponds to our “Heritage Style” radiator grille. The hood is supplied unpainted. The fastening elements of the original hood are used. It is compatible with our anti-theft hood hinges.
Prices incl. VAT;
Underride protection for SUZUKI Jimny type FJ BJ 1998 to 2018
Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.
Prices incl. VAT;
NOLDEN 7-inch Bi-LED reflector main headlamp for Mercedes G
NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and adaptor for Mercedes G. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Mercedes G Wagon. Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, various Toyota, Jeep Wrangler JK/TJ/CJ, etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1,880 lm / 2,400 lm lumens measured: 1,550 lm / 1,700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version. You get one complete set for your vehicle. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.
Prices incl. VAT;
Montagepauschale Trekfinder Lenkungsdämpfer für Land Rover Defender
Professionelle Montage für Lenkungsdämpfer Pauschale für den Einbau und Inbetriebnahme des Trekfinder Lenkungsdämpfers in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Nakatanenga winch bundle, with Superwinch SX 10SR or SX 12SR, incl. accessories
Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL
Prices incl. VAT;
Winch bundle with Horntools Alpha 9.5 or 12.0 including accessories
Bundle with Horntools Alpha winch incl. recovery accessories In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery: The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics.Instead of the conventional steel cable, the winches have a synthetic fibre cable made of high-strength fibre. This is not only significantly lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data winch Horntools Alpha 9.5 - Working range voltage: 10-16 Volt- Max. Power consumption 365 Amp **- Train speed free of load 7 m / minute- Traction 4,300 kg **- 3-stage planetary gear 230:1 geared down- Gross weight: 40 kg- Net weight: 32.3 kg- Weight with steel cable and roller cable window: 37.5 kg- Series wound motor *- Drum (ØxLength): 63x226 mm- Overall size (LxWxH): 577 x 160 x 225 mm Technical data winch Horntools Alpha 12.0:- Working range voltage: 10-16 Volt- Max. Power consumption 600 A **- Train speed free of load 11 m / minute- Traction 5,400 kg **- 3-stage planetary gear 110: 1 geared down- Net weight: 25.8 kg without rope and rope window- Series wound motor *- Drum (ØxLength): 63x226 mm- Overall size (LxWxH): 577 x 160 x 225 mm * Series motor with an electrically generated magnetic field ** Values can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70AH battery. With more powerful battery systems, the pulling power must be limited by the current / voltage. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Bundle consisting of: 1 x winch Horntools Alpha 9.5 or Alpha 12.0 - please select the appropriate variant1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden high-beam headlights black, with 70mm Nolden high-beam headlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier winch" is possible at numerous test centres without any problems by means of an individual acceptance for which a fee is charged. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - from experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate LUBI-FILL impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.
Prices incl. VAT;
Lift-Kit for Land Rover Defender 90 (+40mm) - by Trekfinder
More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!
Prices incl. VAT;
Discovery 3 / 4 / and Range Rover Sport winch attachment kit
Discovery 3 / 4 / and Range Rover Sport winch attachment kit The inconspicuous winch attachment kit enables the practically invisible installation of a common, compact winch behind the original bumper of the Land Rover Discovery III , Discovery IV or Range Rover Sport. The advantages compared to a classic mounting solution (steel bumper in vehicle width) are obvious: visually inconspicuous lower risk of theft and vandalism better protection against environmental conditions less changes to the driving characteristics due to the low weight only minor modifications to the bumper are necessary, no complete reconstruction of the front end no registration in the vehicle documents necessary The front bumper has to be adapted minimally, for this you will receive instructions. The winch window and cable shown are not included in the price, please note our corresponding bundle offer! Please select the engine version of your vehicle.
Prices incl. VAT;
MSD Exhaust Pipe Discovery II SPECIAL
This MSD exhaust pipe for the Discovery II SPECIAL replaces the main Muffler This is motorsport equipment and not street legal! The advantages are a sonorous sound, a significantly lower pressure suction and thus a lower manifold temperature. The sound will grow to be more "full" - like a diesel should - but inside the cabin you will not feel a difference in volume. Of course, the exhaust does not meet the germen TÜV requirements and thus can only be used on private ground and outside the country. Most customers, buying this, speak of a more responsive performance, which we can confirm as well. The lower exhaust temperature does not only benefit the engine, but also decreases the temperature inside the footwell. -picture similar to product- Material: Stainless steel
Prices incl. VAT;
Rear door panel for Land Rover Defender until MY02, black, with storage net
Trim for rear door - Land Rover Defender up to MY 2002 (90 and 110) Rear door trim that replaces the old vinyl covered hardboard and ugly gray trim. This trim is a tough, attractive all-in-one design that really beautifies the interior of the Defender. attractive design all-in-one design flexible storage net (map bag) included in the kit easy installation, does not require special tools 1 - 2 hours installation time robust, scratch-resistant plastic material
Prices incl. VAT;
LIft Kit Discovery II +50mm
Give Your Discovery II The Freedom It Deserves – With the 50mm Lift Kit! Your Land Rover Discovery II is built for adventure, but sometimes its standard limitations bring the fun to an early end. You want more ground clearance to confidently master even challenging terrain? Then our 50mm lift kit is exactly what you need! More Room Underneath for True Off-Road Performance With this kit, you'll raise your Discovery II by a solid 50mm. This doesn't just mean a cooler look, but above all, tangible advantages off-road: Significantly more ground clearance: Overcome obstacles that previously seemed impassable. Improved approach and departure angles: Steeper ascents and descents are no longer a problem. Space for larger tires: Optimize traction and off-road capability with suitable tires (please check tire size details separately). Confident driving feel: Enjoy the improved overview and the feeling of being prepared for any challenge. Quality That Convinces This lift kit is designed to withstand the demands of off-road use. It offers you the robustness and reliability you expect from Nakatanenga, so you can fully concentrate on your driving experience. Ready for the Next Level? Whether you're planning ambitious off-road tours, preparing your vehicle for expeditions, or simply appreciate the improved look and the bonus in off-road capability – this lift kit takes your Discovery II to a new level. Upgrade your Discovery II now and experience how much more potential it holds. Adventure is already waiting for you! Scope of Delivery 1 Set: For a complete vehicle, front and rear axle For standard coil spring suspension or air suspension Delivery includes screws and linkage; however, instead of the linkage, you can also have the sensors recalibrated at a Land Rover dealer – this would be our preferred option.
Prices incl. VAT;
EXTREMEspec clutch TD5 for dual mass flywheel
VNT EXTREMEspec for TD5 with Dual Mass Flywheel At LOF, EXTREMEspec stands for the ultimate Land Rover clutches! If ROADspec and POWERspec are not enough for your demands, because your Landy is destined for extreme performance in work and play, you will not find anything better than LOF EXTREMEspec clutches. They combine unbeatable performance and everyday handling for all Td5 Discovery and Defender-Models with dual mass flywheel. And by the way, the pedal weight is not heavier than the original. Suitable for vehicles 550 NM/ Stage 3 map/ VNT turbo including Race spec turbo. Description: Extra strong LOF clutch cover Billet machined center hub LOF Clutches EXTREMEspec release bearing G90 high-temp assembly grease Clutch cover Nyloc fastener kit 1x CNC wire-formed bearing retaining clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original You can find more products for improved clutch performance here: clutch spring clutch master cylinder clutch slave cylinder
Prices incl. VAT;
Nakatanenga Roof Console Overhead Storage System Defender
Nakatanenga Overhead Storage System Defender Where to put important small items when the storage space in the vehicle cockpit is tight? It's simple! Into the pockets of our Overhead Storage System. Even items that are only needed in an emergency are then within easy reach.In addition to a space-saving bag, the innovative Overhead Storage System contains a base plate that is attached between the sun visor and the car roof. In various bundles, you can then decide whether the plate with radio holder is intended for the driver's or passenger's side. In the case of the base plate with radio holder, a suitable holder for the CB handset is also included in the scope of delivery. This holder uses the three attachment points of the centre mirror.The bag and plate are available in black and grey. As an alternative to the Albrecht radio, other radios with similar dimensions (104 x 100 x 25 mm) can also be attached. No additional holes are required for the base plates, as the existing holes in the sun visor are used for mounting.The bags are manufactured according to US military standards (MIL-SPEC) and our specifications by Delta Bags in Germany. The bag for the plate with radio holder is smaller due to the holder. Can be ordered either individually or in sets.Technical dimensions:Bag standard: 480x150x20 mmBag radio version: 375x150x20 mm
Prices incl. VAT;
Checker plates for rear bumper, Suzuki Jimny II, 1 pair
Checker plate supports rear TREKFINDER for SUZUKI Jimny II from MY 2018 for the rear bumper corners on the right & left side. Scope of delivery: 2 pieces aluminium chequer incl. stainless steel screws. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer (quintet plate)
Prices incl. VAT;
Montagepauschale für Reserveradträger Defender
Professionelle Montage für Reserveradträger Montagepauschale für den Hecktür-Reserveradträger NARRTDEF-02 in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich. Hinweis zur Montagepauschale: Die angegebene Montagepauschale gilt ausschließlich für Standardfahrzeuge ohne zusätzliches Zubehör oder Sonderumbauten. Bitte beachten Sie, dass bei Fahrzeugen mit zusätzlichen Einbauten – wie beispielsweise Zusatztanks, Sonderverkleidungen oder anderen Komponenten, die vor der Montage demontiert oder entleert werden müssen – ein erhöhter Montageaufwand entsteht. In solchen Fällen kann die Montagepauschale abweichen. Sollte bei Ihrem Fahrzeug zusätzlicher Aufwand erforderlich sein, informieren wir Sie selbstverständlich vor Beginn der Arbeiten über mögliche Mehrkosten.
Prices incl. VAT;
Spring cones rear axle for Land Rover Defender 90, RRC, Discover I
Rear Axle Spring Cones Land Rover Defender 90, RRC, Discovery I – For maximum articulation and secure spring guidance! You know it: In extreme terrain, when your suspension is pushed to its limits, it can happen that the springs leave their seats at maximum droop. To prevent this and ensure your springs are always guided securely back into position even with extreme articulation, we offer our spring cones for the rear axle of your Land Rover Defender 90, Range Rover Classic, or Discovery I. What exactly do spring cones do? If the travel of your shock absorbers is longer than that of your springs – which is often the case with lift kits or special off-road suspensions – the coil springs can pop out of their upper mounts at full droop. The spring cones, also known as spring relocation cones or spring guides, are mounted at the top of the frame and ensure that the spring is guided precisely and "cleanly" back into its original position during compression. This prevents damage and ensures the consistently safe function of your suspension. Your advantages at a glance: Secure Spring Guidance: Prevents the spring from slipping out uncontrollably at maximum articulation. Protection for Your Suspension: Prevents damage to springs and other suspension components. Optimal Off-Road Function: Ensures that your suspension works reliably even under extreme conditions. Perfect Fit: Specifically designed for the rear axle of the Land Rover Defender 90, Range Rover Classic, and Discovery I. Robust Design: Manufactured for the tough demands of off-road use. Scope of Delivery: You will receive the spring cones as a pair. Important Note: These spring cones fit with original springs or with Trekfinder springs. Whether this item fits other aftermarket springs must be checked on a case-by-case basis due to potentially thicker wire gauges. They are not suitable if auxiliary springs are used. Give your suspension that extra bit of safety and performance in the field. With these spring cones, you are well-equipped for demanding passages!
Prices incl. VAT;
Washer pump including grommet
Washer pump including grommet Suitable for Land Rover Defender MY 87-98 without air conditioning
Prices incl. VAT;
Raised Air Intake aluminium with conversion kit for air filter housing, driver's side (LHD), Land Rover Defender Td5
Raised Air Intake aluminium black powder coated with cyclonic head and with conversion kit for air filter housing Land Rover Defender Td5 with external roll cage. Stainless steel fitting kit, for driver's side (LHD). Originally conceived for the sandy dust of the Sahara Desert, a raised air intake which draws air from roof-level ensures a cleaner air supply to your engine when driving in dusty conditions, thus protecting your engine and extending air filter replacement. When used in conjunction with a wading kit, a raised air intake improves your vehicle's wading ability for wet or flooded conditions. Additionally, vehicles driven in regions frequently receiving snowfall will benefit to avoid problems from melting snow.
Prices incl. VAT;
Heavy duty rear prop shaft with 25° articulation angle - rear axle P38 - Defender 110 Td5 from MY02 to MY06
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 110 Td5 (P38) model year 2002-2006 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 110 Td5 from MY02 to MY06 with P38 rear axle. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Additional Suspension Kit - progressiv for Defender 110
Progressive additional spring kit for Defender 110 incl. bracket TREKFINDER inner spring kit - optional for the rear axle with TREKFINDER suspension lift installedSuitable for the following TREKFINDER suspensions:Defender 110: 1-888 1-888110T Defender 130: FWTREK130 (these springs are already included in this set) FWLWTREK130 Important note:This inner spring kit was developed exclusively for retrofitting in the above-mentioned TREKFINDER suspensions.Use in other suspension systems has not been tested and is therefore not permitted.There is no separate parts certificate for the inner springs, as they are already listed as an option in the corresponding TREKFINDER suspension reports.Please note:The innersprings do not allow any weight to be added.This set consists of:- 1x TREKFINDER coil springs inside rear axle progressive- 2x brackets for additional springs, rear, top- 2x brackets for additional springs, rear, bottomThis set conists of:1x TREKFINDER Coil Spring Set2x Upper Supports2x Lower Supports
Prices incl. VAT;
Land Rover Rear Bumper / Trailer Jack / Rear Step for Defender 90
Land Rover rear bumper / tow bar / rear step for Defender 90 Rear bumper, for Land Rover Defender 90, with E-mark, for mounting a ball head, E-set and ball head not included, compatible with Nakatanenga spare wheel carrier. Suitable for Land Rover Defender 90 from MY 1998-2016 (TD5 and TD4)
Prices incl. VAT;
Rock Slider für Suzuki Jimny GJ Aluminium, 2 Stk
Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg The aluminum slider is completely sufficient for light terrain. Scope of delivery: Rock slider left & right mounting material 2x step-installation instructions TÜV certificate ... and with an indescribable look for free
Prices incl. VAT;
Repair plate set B-pillar and C-pillar 3-piece, left or right side for Defender 110
The areas around the doors are corrosion hotbeds in a Defender. Even though this is a well-known fact, the rust remains very often undetected and keeps eating into structural components and body panels. The doors feature many corners, angles and surfaces that constantly trap water and wet dirt. Screw fittings, rivets, welding points, the combination of different materials like steel, aluminum and rubber as well as mechanical stress often exacerbate the problem. If you are facing large scale restoration work in your 4/5 door Defender, you might consider whether a complete replacement of B and C pillars as well as the door sill isn’t the cheaper, quicker and most of all more thorough solution. We are offering entire sets for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you need to replace only the C posts you can find them here.
Prices incl. VAT;
Spare wheel holder Land Rover Defender aluminium corrugated, anodised
Spare wheel holder Land Rover Defender, anodised aluminium Spare wheel holder for the bonnet of Land Rover Defender Td5 and Tdi, aluminium riffle, for TD5 with reinforcement plate inside, anodised incl. fixing material as well as holding plate with three bolts made of stainless steel.The reinforcement plate is only required for the TD5 and is only supplied there.
Prices incl. VAT;
Lifting suspension TREKFINDER for SUZUKI Jimny II +40-50 mm, type GJ / HJ
Lifting suspension from TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lift is approx. 40-50 millimetres Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*.. SCOPE OF DELIVERY 1-SUJI2F1: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F2: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F3: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F4: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;