Detroit Truetrac - Limited Slip Front Locker, Rover 24 Splines front axle
Detroit Truetrac - Limited Slip Front Locker, Rover 24 Splines front axle The Detroit Truetrac was the first helical gear differential ever introduced into the automotive aftermarket as an Eaton brand. It remains the leading helical gear-type limited slip differential in the industry. Detroit Truetrac's proven helical gear design eliminates the need for wearable parts, resulting in maintenance free traction. Recognised not only for its toughness but also it’s smooth and quiet operation. Engineered to work efficiently in front and rear axles, semi-floating (C-clip axles) and transfer cases. Power transfer is so smooth, it literally goes unnoticed by the driver - even in front wheel drive axles. There is no need to use special oils or additives, no mechanical activation, no drilling of the diff housing. Proven design, low cost and effective performance, all make the Detroit Truetrac limited slip differential the ideal choice for a wide variety of vehicle applications. No maintenance - Just Traction! 1 unit 2.5 litres of differential gear oil and two bearings are needed for fitting.
Prices incl. VAT;
Heavy duty rear prop shaft with 25° articulation angle - rear axle - Defender 90 Td5/Tdi up tp MY07
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 90 Td5/Tdi from model year 2007 onwards Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90 Td5/Tdi up to MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Borbet CW7 alloy wheel, 7.5x18" ET47
BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design. With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18, 255/70R18; 265/65R18; A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: rim 16 inch, incl. matching wheel nuts Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
Prices incl. VAT;
Complete wheel set, Cooper Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels
Ready for winter: Complete wheel set with Weathermaster WSC on sturdy Borbet CW7 rims BF Goodrich All Terrain T/A KO2 275/55R20 – The classic for road and off-road use Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18" Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels
Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels BFGoodrich ALL Terrain T/A KO2 265/65 R18 117R: The BFGoodrich All Terrain T/A KO2 265/65 R18 117R guarantees driving fun even off the paved roads. It is very stable and has good road grip. It also handles not too difficult terrain with some mud, loose ground well. For extreme terrain and little road use, however, a MUS tyre is recommended. In the AT range BFGoodrich is a very good choice. A SPECIAL TYRE MIXTURE that is resistant to cuts and chipping on the sidewalls to withstand sharp stones. Designed to resist chipping and cracking caused by sharp stones and obstacles in the terrain. IMPRINTED CLAMPS on the sides for more grip and better sidewall protection. The large crampons on the sidewall are synonymous with bite, especially when the tyre is rolling at low pressure. Greater thickness of rubber on the sidewall protects the tyre from off-road hazards. STRENGTHENED CABLES for less sensitive sidewalls. Flank weakness can spoil off-road activities very quickly. Oversized sidewall cables give the carcass the protection it needs for tough off-road use. Performance 50% off-road - 50% on-road Tyre width 265 Ratio of sidewall height to tyre width in percent 65 Rim diameter: 18" Load index: 117/114 Speed index: R 3PMSF Alpine symbol (so-called snowflake): yes M+S marking: yes Weight: 23,06 per tyre Tyre type: All-season Tyre type: Radial Noise emission: 74db Noise class (from 1-quiet to 3-noise): 2 Wet grip (grip on rain-soaked road): B Fuel efficiency (A to G): F When ordering, please let us know whether the white lettering is to be fitted inside or outside.BORBET CW7 alloy wheels 18 inch:With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Complete wheel set Radar Renegade R/T + Mud Terrain 265/65R18 117Q on Borbet CW7 alloy wheels
Radar Renegade R/T+ – Off-road tyres in a class of their own Premium off-road tyres Radar Renegade R/T+ 265/65 R18 117Q: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained in motorsport, countless victories in Lucas Oil races and TORC championships, flows into the production of these premium tyres.Off-road tyres for all the greatsRadar Renegade R/T+ 265/65 R18 117/114Q is a popular MUD Terrain tyre in a class of its own. Whether on sandy, rocky or muddy trails, or completely off-road. Also and especially recommended for racing. The tread design and the durable compound of the model Radar Renegade R/T+ 265/65 R18 117/114Q is especially suitable for off-road, SUV's and all 4x4 vehicles. Performance: 60% off-road - 40% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 117 Speed index: Q M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Weight: 22.94 kg per tyre Tyre construction: Radial Tread name: Renegade R/T+ PLEASE NOTE: This tire carries a P.O.R. marking (“Professional Off Road”). It does not feature a 3PMSF (Three Peak Mountain Snowflake) symbol and is therefore not approved for use in winter road conditions (according to §2 paragraph 3a sentence 1 and 2 of the StVO). We recommend the use of winter tyres in appropriate weather conditions. We will be happy to advise you on this. BORBET CW7 alloy wheel: The BORBET CW7 in the ‘Commercial Wheels’ category is a new wheel that impresses not only in terms of design, but also with high wheel loads of up to 1,400 kg. The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also perfect for the real movers and shakers among vehicles. From vans and off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", ET 47 Colour: choice of matt black or matt bronze Suitability: for Ineos Grenadier Certificate: for 255/65R18 255/70R18 265/65R18 A01) K02) Scope of delivery: rim, incl. matching wheel nuts High wheel load Winter-proof Scope of delivery: rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels, including fitting and balancing. This item is classified as bulky goods.
Prices incl. VAT;
Complete wheel set Pirelli Scorpion A/T plus All Terrain 265/65R18 114T on Borbet CW7 alloy wheels
Pirelli Scorpion A/T+ – All-terrain tyre with snowflake symbol Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T: Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges. Performance: 40% off-road - 60% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: T 3PMSF Alpine symbol (so-called snowflake): yes Tyre type: All-season Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): D Fuel efficiency (A to G): D Weight: 18.72kg Tread Name: Scorpion A/T+ BORBET CW7 alloy wheel 18 inch: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18" offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Complete wheel set Radar Renegade A/T-5 All Terrain 265/65R18 114H on Borbet CW7 alloy rims
Premium off-road tyres Radar Renegade A/T AT5 265/65 R18 114H Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained from motorsport, countless victories in the Lucas Oil races and the TORC championships, flows into the production of these premium tyres.Off-road tyres for the whole Big Radar Renegade A/T AT5 265/65 R18 114H is a popular all-terrain tyre in a class of its own. Whether on sandy, rocky or muddy roads, or completely off-road, the tread pattern and durable compound of this model allow the Radar Renegade A/T AT5 265/65 R18 114H to be used as an on-road tyre but also off-road. Performance: 30% off-road - 70% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: H M+S marking: yes Weight: 19,07kg per tyre Tyre type: Summer Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): E Fuel efficiency (A to G): E Tread Name: Renegade A/T AT5 When ordering, please let us know if the white lettering is to be fitted inside or outside. BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Nakatanenga winch bundle, with Superwinch SX 10SR or SX 12SR, color: black, incl. accessories
Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear.The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system.It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch, Color: black: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch, Color: black: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL
Prices incl. VAT;
Upgrade headlamp - single - for radiator grille INEOS GRENADIER, pair
Experience unmatched performance Versatility and visibility with the CG2 Light Cannon series, your leading LED solution for off-road lighting. Whether you're conquering winding trails or braving challenging weather conditions, these headlamps are designed to illuminate your path. Exceptional features : High beam: Choose a single LED beam to illuminate long distances or for precise light exactly where you need it. Ultra-bright light: CG2 Series ultra-bright LEDs give you exceptional visibility, even at the farthest distances, so you can feel confident driving day or night. Adaptation to extreme conditions: Difficult weather conditions are no longer an obstacle. Thanks to the new Selective Yellow lens option, you can drive through dust, rain, snow and fog and still maintain maximum visibility. Advanced Specifications : 40W Single Source LED: Benefit from a long-range 40W spot beam to illuminate your path like never before. Iris Reflector Technology: Iris reflector technology provides increased range for better visibility so you can see further. High-quality CREE LEDs: The highest quality CREE LEDs ensure long-lasting durability and exceptional performance. Easy installation: Each pair of headlamps comes with an included plug-and-play harness that simplifies installation, so you can be in the palm of your hand. Transform your riding experience with the CG2 Light Cannon series. Powerful illumination, unmatched reliability and total adaptability make these headlights the perfect solution for off-road adventurers. Order today and explore the world with confidence, no matter what road you're on. TECHNICAL DESCRIPTION Dimensions (LxWxH): 14.53 cm x 9.37 cm x 13.41 cm. Input voltage: 9-32 V DC. AMP consumption: 6.67 A. Power: 80 W Gross volume: 6,000 lm Distance: 340 m Beam type: Spot beam Scope of delivery: 2 spotlights with connection cable
Prices incl. VAT;
Exhaust system for Land Rover Defender 110 2.5Tdi as of 1994
Exhaust system for Land Rover Defender 110 2.5Tdi from 1994 onwards Content of the set: Front pipe Middle pipe Rear silencer Exhaust 110 Defender 2.5 Tdi from 1994 - DOPPEL-SS
Prices incl. VAT;
Lifting spring kit for INEOS Grenadier from TREKFINDER WITH cable winch + 30 mm
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Lifting spring kit for INEOS Grenadier from TREKFINDER WITHOUT cable winch + 30 mm
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Lowering spring kit for INEOS Grenadier from TREKFINDER - 30 mm
Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate
Prices incl. VAT;
Running boards for Land Rover New Defender 110 / 130 from MY2020
Side steps available for: Defender 110 & 110 Hard Top - from 2020 Defender 130 - from 2020 Side running boards and door sills, black powder-coated, with anti-slip tape and stainless steel filler plates. Designed for mounting on the existing brackets in the sill.The plastic sill covers need to be slightly modified to gain access to the fixing points. An adapter is supplied for use with the original jack.
Prices incl. VAT;
Headlining for Land Rover Defender 90/110; MY1987-2016; with cut-outs for Alpine windows
Roof liner set Colour: Light grey for Defender 110 - 1987 - 2016 - with Alpine window for Defender 90 - 1987 - 2016 - with Alpine window Say goodbye to sagging headliners: Our kits are made to replace sagging or worn fabric headliners and give your Defender's interior a much-needed facelift.Strong composite for durability: Made from a tough composite material with a textured finish, these kits offer greater durability and longevity than conventional headliners.Easy to clean surface: The wipe-clean surface of our headliner kits makes it easy to keep the interior clean and hygienic.Easy installation with existing clips: These headliner kits can be fitted using the existing clips in your vehicle, making installation quick and hassle-free.Perfect fit through moulding: Each headliner is precisely moulded to fit the contours of your Defender, giving it a professional and elegant look.Lightweight construction: Despite their rigidity and durability, our headliner kits are surprisingly lightweight, so they won't add unnecessary weight to your vehicle.
Prices incl. VAT;
Wheel spacers TREKFINDER for Ineos Grenadier 66mm per axle
TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels. The following vehicles are approved according to the TÜV parts certificate: Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*... The following wheel/tyre combinations are approved according to the TÜV parts certificate: 265/70R17 with 7.5x17255/70R18 with 8.0x18 Scope of delivery: Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained. Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel. Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met: - Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.
Prices incl. VAT;
Spring spacer set TREKFINDER for LAND ROVER Defender 110/130
Spring Distance Kit ( FDS ) from TREKFINDER for Defender 110/130 VA & HA +30 mm complete car Suitable for: Defender 110 Defender 130 Details: the lift is 30 millimetres made of aluminium black hard anodised the scope of delivery is for both axles, i.e. a complete car the discs are installed between the lower spring end and the spring plate the standard shock absorbers can still be used the discs may only be used with the standard springs please also note the optional mounting kit Art. No.: FDS-AN SCOPE OF DELIVERY: 4 spacer discs 1 TÜV® parts certificate
Prices incl. VAT;
Nakatanenga rear side window ventilation panels - JAC T8 Pro
Ventilation panels rear side window JAC T8 Pro The JAC T8 Pro combines payload capacity with modern features. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection against insects? This is possible with our special ventilation panels with mosquito nets, which are manufactured specifically for the JAC T8 Pro — made of solid aluminium instead of rattling universal parts. The black powder-coated panels, supplied in pairs, ensure a discreet appearance and greater comfort in hot weather or when used as a work vehicle. Installation is straightforward: wind down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Length: 685 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black
Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black The ABNTR4X4 Rockslider in black for the INEOS Quartermaster is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the rigidity under lateral loads in off-road use, the elongated holes on the sides are dimpled inwards. It is mounted on the original mounts without drilling. The Rockslider is mounted directly underneath the doors instead of the plastic panelling. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Quartermaster is not changed or impaired. The Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface of drawn studs. Thanks to its shape, the Rockslider also protects against excessive dirt in the field. The dirt picked up can be rinsed out again through openings on the underside. Technical data: Suitable for Quartermaster 25 kg per Rockslider incl. bracket Mounting on original fastening points Delivery: 1 set of Rockslider stainless steel, colour black (left & right) Bracket and fastening material (left & right) Set of galvanised screws Utility model protection: 20 2023 001 190.6 Shipped on a pallet. Registration by individual approval possible.
Prices incl. VAT;
New Defender winch attachment kit (only for diesel vehicles)
Winch bracket Only a winch turns an all-wheel drive vehicle into a real off-roader. Anyone who has previously shied away from installing a winch on the New Defender (from 2020) because it detracts from the elegant design can now use the Terrafirma winch kit to install compact winches with a removable relay box so discreetly that they are almost invisible - without any loss of functionality. Detailed installation instructions guide you step by step through the removal of the original body parts, any necessary modifications, the installation of the Terrafirma mounting kit and the final re-installation of the original panels and covers. The winch control unit is relocated to the engine compartment. The kit includes all the necessary materials for mounting and electrical installation as well as the corresponding templates for modifying the covers. Here are the dimensions of a suitable cable winch. You can use these dimensions to judge whether your desired cable winch can be installed: Caption
Prices incl. VAT;
Snorkel for New Defender
Snorkel for Land Rover New Defender, from model year 2020 The snorkel not only enables safe driving through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The raised air intake at roof height ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.
Prices incl. VAT;
Aluminium rim for Discovery II and Range Rover P38 ZU 8x16" ET38
Aluminium 16 inch rim Discovery II / Range Rover P38 ZU 8x16" ET38 Weight only 10.4 kg load capacity 1,400 kg - incl. TÜV certificate. Rims size: 8x16" ET 38 16-inch aluminium rim Discovery II / Range Rover P38 We recommend balancing the rims for the Land Rover Defender using bolt or centre
Prices incl. VAT;
LOF POWERspec, ventilated front brake kit for Ford Ranger 2.2/3.2 TDCI from MY2011
Ford Ranger 2.2/3.2 TDCI (from 2011) POWERspec ventilated front brake kit The LOF POWERspec brake kit is designed for heavily loaded Ford Rangers. Our brake discs and pads meet OEM specification and meet the same quality and tolerance as original brake components. Our POWERspec kits come complete with fitting kit, including fasteners, bolts, anti-rattle washers and the appropriate grease if required! Brake disks: Dimpled and grooved, with black phosphate coating for corrosion protection and to remove dirt and heat. Pads: High performance organic/ceramic friction material. R90-approved brake pads for use in Europe and the rest of the world! POWERspec pads: We have developed the LOF POWERspec brake range for tuned and modified heavy-duty trucks. High braking effect, improved coefficient of friction (0.47). Designed for fast driving, for stopping heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers to reduce noise. The pads are uncoated, minimal break-in required. The pads have a noise-reducing coating on the rear. Scope of delivery Kit: 2x LOF POWERspec high carbon front brake discs - with indentations, grooves and black phosphate coating 4x LOF POWERspec brake pads, performance high-speed road friction with mechanical wear indicator 4x brake calliper side parts with rubber sleeves 4x brake calliper sliding bolts 4x brake pad retaining clips, if available 2x bag of LOF Ceratec brake grease Disc dimensions: Diameter: 302 mm Thickness: 32 mm Height: 61mm Center bore: 98 mm
Prices incl. VAT;
LOF POWERspec, ventilated front brake kit for Isuzu D-MAX, various versions
Isuzu D-Max POWERspec ventilated front brake kit The LOF POWERspec brake kit is designed for the heavily loaded Isuzu D-Max. Our brake discs and pads meet the OEM specification and meet the same quality and tolerance as original brake components. Our POWERspec kits come complete with fitting kit, including fasteners, bolts, anti-rattle washers and the appropriate grease if required! Brake disks: Dimpled and grooved, with black phosphate coating for corrosion protection and removal of dirt and heat. Pads: High performance organic/ceramic friction material. R90-approved brake pads for use in Europe and the rest of the world! POWERspec pads: We have developed the LOF POWERspec brake range for tuned and modified heavy-duty trucks. High braking effect, improved coefficient of friction (0.47). Designed for fast driving, for stopping heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers to reduce noise. The pads are uncoated, minimal break-in required. The pads have a noise-reducing coating on the back. Scope of delivery in the kit: 2x LOF POWERspec high carbon front brake discs - with indentations, grooves and black phosphate coating 4x LOF POWERspec brake pads, performance high-speed road friction with mechanical wear indicator 4x brake calliper side parts with rubber sleeves 4x brake calliper sliding bolts 4x brake pad retaining clips, if available 2x bag of LOF Ceratec brake grease Disc dimensions 2.5 DiTD (MY 2006-2012): Diameter: 280 mm Thickness: 27 mm Height: 40 mm Center bore: 88 mm Disc dimensions 2.5 CRDi (MY 2012-2017): Diameter: 300 mm Thickness: 27 mm Height: 40mm Center hole: 88 mm Disc dimensions 1.9 CRDi (MY 2017-2021): Diameter: 300 mm Thickness: 27 mm Height: 40mm Center hole: 88 mm
Prices incl. VAT;
LOF POWERspec, ventilated front brake kit for Mitsubishi L200, various models
Mitsubishi L200 POWERspec ventilated front brake kit The LOF POWERspec brake kit is designed for the heavily loaded Isuzu D-Max. Our brake discs and pads meet the OEM specification and meet the same quality and tolerance as original brake components. Our POWERspec kits come complete with fitting kit, including fasteners, bolts, anti-rattle washers and the appropriate grease if required! Brake disks: Dimpled and grooved, with black phosphate coating for corrosion protection and removal of dirt and heat. Pads: High performance organic/ceramic friction material. R90-approved brake pads for use in Europe and the rest of the world! POWERspec pads: We have developed the LOF POWERspec brake range for tuned and modified heavy-duty trucks. High braking effect, improved coefficient of friction (0.47). Designed for fast driving, for stopping heavily loaded vehicles, including towing vehicles. POWERspec pads have edge chamfers to reduce noise. The pads are uncoated, minimal break-in required. The pads have a noise-reducing coating on the back. Scope of delivery Kit: 2x LOF POWERspec high carbon front brake discs - with indentations, grooves and black phosphate coating 4x LOF POWERspec brake pads, performance high-speed road friction with mechanical wear indicator 4x brake calliper side parts with rubber sleeves 4x brake calliper sliding bolts 4x brake pad retaining clips, if available 2x bag of LOF Ceratec brake grease Disc dimensions L200 2.5 Di-D (2006-16): Diameter: 295 mm Thickness: 28 mm Height: 46.5 mm Center bore: 93.5 mm Disc dimensions L200 2.4 D (2015-20): Diameter: 295 mm Thickness: 28 mm Height: 46 mm Center hole: 94 mm
Prices incl. VAT;
LOF POWERspec front full brake kit for Suzuki Jimny , various models
LOF POWERspec front full brake kit for Suzuki Jimny , various models The LOF POWERspec Brake kit is designed for Heavy loaded Jimnys, Our Discs and Pads are of an ‘OEM’ spec, made to the same Quality and Tolerances as Original Genuine brake components. Our POWERspec kits come complete with fitting kit, including fasteners, Pins, anti rattle shims and the correct grease where necessary! Discs: Dimpled and grooved, with black phosphate finish for corrosion resistance and removal of Debris & Heat. Pads: Performance Organic/ Ceramic friction material. R90 Approved Brake pads for use in Europe + Rest of world! POWERspec Pads: We have designed the LOF POWERspec Brake range for tuned and modified hard working trucks. A high braking effect, Upgraded coefficient of friction (0.47) Designed for fast road use, stopping highly loaded vehicles including towing vehicles. POWERspec pads have edge chamfers which reduce noise, Pads are uncoated, minimal bedding in required. Pads include noise reduction coating shim on the rear of the pad. Scope of delivery Kit : 2x LOF POWERspec high-carbon front brake discs - dimpled, grooved and black phosphated 4x LOF POWERspec brake pads, performance fast road friction with mechanical wear indicator 4x brake caliper sliders with rubber bellows 4x brake caliper slider bolt 4x brake pad retaining clips, where applicable 2x packets of LOF Ceratec brake grease Disc dimensions Suzuki Jimny 1.3L (MY 98-2018): Diameter: 290mm Thickness: 10mm Height: 46mm Centre bore: 108 mm Disc dimensions Suzuki Jimny 1.5L (MY 18-24): Diameter: 290mm Thickness: 10mm Height: 46mm Centre bore: 108mm
Prices incl. VAT;
Rockslider LAPIS aluminium from Horntools for various vehicles
Robust rock slider design made of aluminium The front plate is reinforced with ‘dimple die’ beading. The steps can be unscrewed or replaced if necessary. If the footboards are not used, the holes in the Rockslider can be sealed with the screws supplied. The connection to the vehicle is made using the existing threaded inserts on the underside of the body. The Rockslider is bolted to the bodywork with 6 M10 bolts. Our Rockslider has been issued with a parts certificate by TÜV Süd. We have opted for a lightweight construction, which is why our Rockslider is a functional aluminium cab guard, so it is not suitable for a jack, but it provides more than adequate protection in moderately difficult terrain. Scope of delivery: Rockslider left & right Mounting material 4x step Installation instructions TÜV certificate and an indescribable look for free Attention: The Rockslider is only suitable for double cabs.
Prices incl. VAT;
Horntools ExRoof roof rack for Ford Ranger year 2016 - 2022
ExRoof roof rack for Ford Ranger Double Cab (year of construction 2016 to 2022) The ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories. Technical data: - Material: Aluminum 6063 - Weight: 20 kg - Surface: Powder coating - Size: 1600 mm x 1250 mm x 49 mm Scope of delivery - Base carrier - Roof rack feet - Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.
Prices incl. VAT;
Horntools ExRoof roof rack for Ford Ranger year 2016 - 2022
Ideal carrier system for off-road use and for tradesmen Off-road use with the Ford Ranger requires particularly stable mounts, as the vehicle is exposed to higher forces. We have built the platform for the Ford Ranger / Raptor with this in mind. You have sufficient space and fastening options for attaching load securing devices or bolting on practical roof rack accessories. Heavy loads on the roof of the Ford Ranger can therefore be positioned anywhere on the roof rack platform and securely lashed down. Both across the roof and in the direction of travel. Roof rack uses the original attachment points, no drilling required Compatible with Ford Ranger (XL, XLT and Tremor from 2023), Ford Ranger Raptor (from 2023) and VW Amarok (Entry, Style and Life from 2023) Aerodynamic deflector is included in the scope of delivery ExRoof roof rack for Ford Ranger & Raptor (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Ford Ranger / Raptor is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle. This Ford Ranger roof rack is also very popular with tradesmen. If the loading area of the pick-up is no longer sufficient for tools or other transport items, toolboxes or ladders can be safely stowed on the platform. Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions
Prices incl. VAT;
Horntools ExRoof roof rack for Mitsubishi L200
ExRoof roof rack for Mitsubishi L200 (from model year 2016) The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories. Technical data: Material: Aluminum 6063 Weight: 20kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.
Prices incl. VAT;
Horntools ExRoof roof rack for Volkswagen Amarok
ExRoof roof rack for Volkswagen® Amarok Double Cab (from year of construction 2010 to 2022) The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories. Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface. The manufacturer responsible for the modifications/conversions is horntools GmbH, not Volkswagen AG. Volkswagen AG accepts no responsibility or liability for any negative effects that may occur as a result of the modifications to the vehicle.
Prices incl. VAT;