Steering damper reinforced TREKFINDER for SUZUKI Jimny II from MY 2018
Steering damper reinforced TREKFINDER for SUZUKI Jimny II from 2018 type GJ & HJ reliably reduces, prevents and eliminates steering wheel vibrations in/on your Jimny if all attempts and efforts such as balancing the wheels, adjusting the toe, correcting the caster, replacing the wheel and steering knuckle bearings, etc. have not been successful........this steering damper will certainly help you :) the installation of the steering damper is very easy and plug and play, the standard damper is simply replaced, the new steering damper fits to the standard mounting points. drilling, welding, deburring, painting etc. is NOT necessary for the installation of our steering damper very suitable for Jimny's WITH and WITHOUT lowering or raising the vehicle the Foam Cell technology in the twin-tube damper with 35 mm piston rod and maximum volume prevents the mixing of gas molecules in the oil, guarantees a long service life and perfect performance in ON- and OFFROAD OPERATION track adjustment is NOT necessary after assembly SCOPE OF DELIVERY: 1 piece TREKFINDER steering damper/Foam Cell Technology
Prices incl. VAT;
Underride protection for SUZUKI Jimny type FJ BJ 1998 to 2018
Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.
Prices incl. VAT;
Steering damper kit TREKFINDER for Suzuki Jimny1 to BJ 2018
Steering damper kit TREKFINDER for Suzuki Jimny I type FJ until 2018 the mounting of the steering damper is done on the frame and the tie rod, by means of special heavy duty mounting kits, with conceivably easy installation drilling, welding, deburring, painting etc. is NOT necessary for the installation of our steering damper optimal angle of attack to the steering rod by mounting with frame kit and at rotatable track rod angle, NO mounting at the thin gusset plate of the towing lug direct response due to the high stiffness of both mounting kits, no "bending" or "turning" as with other mounting points e.g. towing lug plate etc. very well suitable for Jimny`s WITH and WITHOUT height or lowering suitable for ALL Jimny I models (gasoline + diesel and 2/4WD) below in the text the models/the area of application are still separately specified (see KFZ certificate) the Foam Cell technology in the twin-tube damper with 35 mm piston rod and maximum volume, prevents the mixing of gas molecules in the oil, guarantees a long life and a perfect performance in ON- u. OFFROAD OPERATION track adjustment is NOT required after installation fits in combination with ALL engine and underride guards known to us SCOPE OF DELIVERY: 1 piece TREKFINDER steering damper/foam cell1 piece TREKFINDER mounting kit steering rod/galvanized1 piece TREKFINDER mounting kit frame/galvanized1 piece installation and assembly instructions1 piece TÜV® parts certificate The following area of application is listed in the parts certificate: Vehicle manufacturer: SUZUKI ( J ) Jimny / SANTANA ( E ) Jimny ConvertibleVehicle type: FJTrade name: Jimny / Jimny CabrioEC TG No.: e6*XXXX/XXX*0056*.. / e9*XXXX/XXX*0034*..
Prices incl. VAT;
CargoBear wind deflector for Jimny 2 CargoBear roof racks
Wind deflector suitable for Nakatanenga CargoBear 2.0 Suzuki Jimny 2 (GJ) Material: aluminum, black matt powder-coated Incl. mounting material
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM suitable for all Jimny models of the type GJ built from the end of 2018 and Type HJ suitable for all engine and transmission types from 3 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle
Prices incl. VAT;
Dotz Dakar 7x16" ET0 and 6x15" suitable for Defender, Mercedes G and Jimny II GJ HJ
Dotz Dakar Steel Rim The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released for a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims. We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim in two sizes: as 7x16 inch or 6x15 inch with an offset of 0 mil. The larger 16 inches wheel rims are available in silver, the smaller 15 inches ones are available in both silver and Dakar Dark, which is to say glossy black – a premium look for any 4x4. The Dakar’s style not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim. Including certification documents. Size:7 x 16" / ET 0.0 Silver6 x 15" / ET 0.0 Silver or glossy black
Prices incl. VAT;
Nakatanenga Air Vents - Suzuki Jimny 2 (GJ & HJ)
The Suzuki Jimny II is small, agile, and a true off-road cult classic. Want good air circulation like with slightly open windows, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made specifically for the Jimny II from sturdy aluminum, offer just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping trips and adventure excursions with small luggage. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Ventilation panels on the driver and passenger sides must not be used while driving! Material: Aluminum Suitable for: Suzuki Jimny II (GJ & HJ) <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Tailgate organiser with 5 MOLLE pockets, for Suzuki Jimny FJ, GJ/HJ with tailgate
Tailgate Organiser – Tailgate organisation system for Suzuki Jimny 1+2 For anyone who drives a Suzuki Jeep: the Tailgate Organiser transforms the tailgate into a practical storage space for small items such as first aid kits, tools or outdoor gadgets. Thanks to the MOLLE laser-cut system, various bags can be attached flexibly – for tidiness and quick access. The advantages of MOLLE Laser Cut: Reduced weight thanks to less material Easy attachment and removal of bags Flat design, no snagging Firm and secure hold Further information on the MOLLE system can be found in the downloads. Scope of delivery: Suzuki Jimny up to model year 2018 FJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny 2 GJ/HJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Important note: On Suzuki Jimny models built from 2021 onwards (type GJ/HJ), the emergency release for the tailgate can no longer be used once the organiser has been fitted. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Sonniboy set for rear side windows and rear window for Suzuki Jimny 2, ab Bj 2018
Optimum sun protection solution for the Jimny II: The ClimAir SONNIBOY for more comfort, privacy and safety One of the many strengths of the Jimny II is its great 360 panoramic view, rare for a 4x4. But the large windows – relative to car size – have one big disadvantage: the heat build-up on hot days is considerable and that’s especially problematic for a car that is a preferred mode of transport for pets and working dogs. Whether with or without air conditioning, the ClimAir SONNIBOY sun and privacy screens make your vehicle on hot days much more comfortable when you’re driving, when the car is parked or when you have to leave children or pets behind while shopping for example. The three elements making up the SONNIBOY kit are tailor-made to fit rear and rear side windows of the Jimny II. Moreover, they simply click into a sturdy, hardly noticeable and easy to install fastening system. And since most Jimny II’s are real work horses, the privacy screen feature is also of great value. Tools, hunting equipment or sports gear are discreetly kept from prying eyes whereas dogs and other pets feel a lot calmer and less exposed. The all-round visibility for driver and passengers from the inside isn’t diminished either due to the material’s special surface structure. And when compared to dark window films, the obvious advantage is the fact SONNIBOY nets can be removed whenever you need to. SONNIBOY sun and privacy screens by ClimAir offer quality Made in Germany.
Prices incl. VAT;
Parts certificate TREKFINDER for tyre conversion SUZUKI Jimmy II Type GJ/HJ
Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15 With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*. a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT) 1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping ) only 1 part certificate will be delivered, NO tyres, NO rims etc. ! the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery. the use of snow chains is not permitted ! there is NO brand binding for the tyres ! NO additional mudguard extensions are required ! it is NOT possible to send the certificate by e-mail or fax !
Prices incl. VAT;
Modular vehicle panel for Suzuki Jimny 2 type GJ / HJ, for rear side windows, incl. mounting
All packed up for your trip? Of Course! But where is it? For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time. The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible. Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Prices incl. VAT;
Trailing arm bushing set TREKFINDER for SUZUKI Jimny I front axle
Trailing arm hanger kit TREKFINDER for SUZUKI Jimny I type FJ up to year of construction 2018 for the trailing arms at the attachment to the front axle for correction and optimisation of the caster angle recommended for suspensions from 3 cm of height increase 4 bushings with eccentric bore vulcanised in rubber
Prices incl. VAT;
Trailing arm bushing set TREKFINDER for SUZUKI Jimny II front axle
Trailing arm hanger kit TREKFINDER for SUZUKI Jimny II Type GJ & HJ from MY 2018 onwards for the trailing arms at the attachment to the front axle for correction/optimisation of the caster angle recommended for suspensions from 3 cm height adjustment onwards 4 bushings with eccentric bore vulcanised in rubber
Prices incl. VAT;
Nakatanenga Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ
Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task. For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.
Prices incl. VAT;
Mudguard widening kit for Suzuki Jimny from TREKFINDER with 4 pieces each 150 cm long incl. TÜV®.
Mudguard widening kit for the Suzuki Jimny I FJ from TREKFINDER - 4 pieces, each 150 cm long / tyre tread cover 20 mm / incl. TÜV® / universal mounting Ideal e.g. with the 56 mm wheel spacer from TREKFINDER in combination with 215 tyres on 5.5J standard rims !!! Inexpensive and flexible wing flares in very good quality indestructible and therefore durable mudguard extensions made of black rubber the fender flares are glued to the existing wing flares of the Jimny and additionally fixed with screws (the screws are not included in the scope of delivery) the factory backing film is removed and the fender flares are then glued to the clean surface SCOPE OF DELIVERY: 4 TREKFINDER mudguard extensions, 150 cm each 1 TÜV® test report 1 type plate 1 piece assembly instructions 1 photo sheet ATTENTION - important installation instructions: the mounting surface must be smooth, rust-free, thoroughly cleaned and free of grease the outside temperature and the temperature of the components or mounting surface at the time of installation and for a period of 24 hours thereafter must be at least 20° Celsius after removing the 3M tape carrier film, the widener must be pressed evenly against the mounting surface for approx. 1 minute with high pressure adjust the ends of the widening to your taste with a sharp carpet knife to match the look of the vehicle Please allow the vehicle to stand for at least 24 hours after installation, preferably 48 hours the final strength of the bonding is only achieved after 48 hours Please do not wash the vehicle for at least 48 hours in some installation situations, especially if the installation instructions cannot be adhered to, additional fastening with e.g. self-tapping screws, body adhesive, primer is recommended
Prices incl. VAT;
Roof console for Suzuki Jimny 2, type GJ, 3-pcs.
Roof console for Suzuki Jimny 2, type GJ On our passionate mission to optimize the storage space in the Suzuki Jimny II in the best possible way, we have set our sights on one of the last remaining spaces in the interior. Having covered the rear area well with the CargoBear shelf, cargo net, tailgate organizer, seat covers and modular window panels, we are left with an empty piece of headliner between the driver and front passenger that is crying out for a storage upgrade. Our roof console made of 2 mm thick aluminum is approx. 73 cm long and 18 cm wide, making it ideal for strapping or screwing on flat and/or long items of equipment, MOLLE bags and the like. Mounting the bracket is extremely simple, regardless of whether a cargo net is already installed or not. In the former case, the retaining plate of the console is attached directly to the strip of the cargo net. If the headlining is still bare, there are two plugged mounting points at the corresponding points at the factory which are used. At the front, the interior light must be removed briefly in order to make two small holes in the trim for the screws. Once the screws have been secured with the nuts, the interior lighting can be refitted. The roof console for the Jimny 2 is available in black, coyote or gray to match the roof net versions.
Prices incl. VAT;
K&N sports air filter for Suzuki Jimny2 (GJ)
Highflow sports air filter for Suzuki Jimny2 (GJ) Since the combustion engine is basically an air pump - air is sucked in at one end, then burned as a fuel mixture and expelled again at the other end - it benefits when not only individual components are optimized, but the entire system. In addition to chip tuning, which optimizes combustion, the air intake and exhaust system should also be optimized - i.e. tuned - as this is the only way to achieve optimum results and make the most of investments. As is so often the case, the whole is more than the sum of its parts. One of the simplest and cheapest options here is to replace the original air filter with a model with increased air flow. K&N is the inventor and manufacturer of the original when it comes to washable and reusable high-performance air filters. Each air filter is designed for increased performance and a lifetime of durability. The filtering effect remains intact over the entire period. K&N offers a 1,600,000 km warranty on every air filter (filter frame and filter media) in addition to the statutory warranty. Cleaning the K&N air filter is usually not necessary before 80,000 km. You too can rely on the 35 years of experience of the market leader in performance air filters! We offer air filters for almost all cars and off-road vehicles. Buy a K&N and experience the difference: 1,600,000 km warranty. This warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty. performance-enhancing - the higher air flow rate leads to improved acceleration/draft economical: a K&N air filter lasts for the entire service life of your car, motorcycle or off-road vehicle Registration-free Motorsport proven - number 1 in motorsport worldwide Cotton, washable Up to 40% more air flow Saves maintenance costs - no need to buy a new expensive factory paper filter at every inspection Environmentally friendly - its long service life reduces waste and protects trees Cleaning usually only necessary every 80,000 km No more filter changes - the oil-impregnated cotton fabric of the filter ensures a maintenance-free service life, during which the filter only needs to be cleaned and re-oiled from time to time. The filter only needs to be cleaned when a 2-3 mm thick layer of dirt has formed on the filter material. To clean your K&N sports air filter, please only use the K&N cleaning kit provided for this purpose.
Prices incl. VAT;
Front wind deflectors (1 set) for driver and passenger side Suzuki Jimny 2, ab Bj 2018, smoke grey
The perfectly fitting and extremely robust wind deflectors from ClimAir Off-road vehicles are not designed for aerodynamically perfect airflow. So far, so obvious and normally it doesn’t matter anyway because in a 4x4 you’re unlikely to reach the speeds where it becomes problematic. But there is one aspect where the rustic box shape of Jimny 2 does show the effects of aerodynamic neglect and that’s the nearly rectangular shape and the straight and vertical positioning of the windows. There’s more than one reason in a 4x4 to crack your windows a little, whether you’re off-roading or it’s cold and wet. Your classic Jimny windows for instance are misting up because the ventilation famously isn’t up to the job of defogging them. And that’s when you see the effect we’ve talked about in the beginning. The drag around the cracked windows is not only loud, it also pulls more dust and water inwards and that’s pretty annoying, even for hardcore off-roaders. Wind deflectors by ClimAir for Jimny 2, offer the perfect solution. Their tailor-made fit and robust build guarantee improved intake of fresh air and better climatic conditions inside the vehicle all year round while protecting the windows. Made from high-quality acrylic glass, the deflectors reliably keep out rainwater and snow, whether the car is being driven or parked somewhere. On hot days, you can prevent heat build-up in the car by leaving the window cracked open – a huge improvement for children and pets alike when travelling or while waiting in a carpark. Smokers and especially their passengers will also appreciate the fresh air. ClimAir wind deflectors are available in smoke grey and come with German type approval (ABE). Fitting them is easy and only a question of minutes. The manual is included.The wind deflectors are available in pairs for the front doors.
Prices incl. VAT;
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.
Prices incl. VAT;
Chequer plate supports Suzuki Jimny, type GJ / HJ
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Prices incl. VAT;
Checker plates for rear bumper, Suzuki Jimny II, 1 pair
Checker plate supports rear TREKFINDER for SUZUKI Jimny II from MY 2018 for the rear bumper corners on the right & left side. Scope of delivery: 2 pieces aluminium chequer incl. stainless steel screws. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer (quintet plate)
Prices incl. VAT;
CargoBear awning holder for Jimny 2 GJ / HJ roof rack CargoBear
One of the best moments when car camping or attending a 4x4 meeting is when you unfold your side awning from the roof rack. It means you’ve arrived and all the enjoyment is ahead of you. Sheltered by the tarp, you can rest easy in your camping chair, put your feet up and think about the things to come over a coffee or a cold one. Since there is now a CargoBear for the Jimny II, you can also mount a variety of car awnings on it. Our mounting brackets are made from black powder-coated stainless steel and are fixed to the lateral incline of at least two CargoBear cross bars. They fit amongst others the RoofLodge Awning, RhinoRack Foxwing and RhinoRack SunSeeker. All fixing materials to the roof rack are included. Not included is the fastening material for the awnings themselves. suitable for all CargoBear 1 + 2.
Prices incl. VAT;
Door handle shells TREKFINDER for SUZUKI Jimny II from 10/2018, Typ GJ and HJ right & left side
TREKFINDER door protection - door handle shells for Suzuki Jimny II (GJ/HJ) The robust door handle moulding set from TREKFINDER reliably protects the sensitive areas around the door handles from scratches and damage - ideal for everyday and off-road use. Made from black plastic, suitable for the right and left side of the Suzuki Jimny II (model GJ from 10/2018 and model HJ).
Prices incl. VAT;
Nakatanenga door net
Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.
Prices incl. VAT;
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin
Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.
Prices incl. VAT;
Nakatanenga trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018)
Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.
Prices incl. VAT;
Nakatanenga Molle bags
Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.
Prices incl. VAT;
Spring Spacer Ring - Spacer - Lifting - Levelling TREKFINDER
Spring Spacer Ring/ Trim Packer/ Lifting Ring TREKFINDER for SUZUKI Jimny I & II + 10 Millimeter in colour red - for levelling at the front or/and rear axle. Suitable for all Jimny models at the front and rear axle: Jimny II type GJ & HJ as of MY 2018 Jimny I type FJ until MY 2018 for the front axle spring for the rear axle spring 10 millimetre height adjustment SCOPE OF DELIVERY: 1 piece TREKFINDER polyurethane spring distance ring with marking TREKFINDER logo + FDR10 in colour red. NOTE: The spacer rings are listed in the TÜV® parts certificate for our TREKFINDER Jimny II complete suspension 40 mm and Jimny I suspension 55 mm and can therefore be optionally installed 1x per spring.A general TÜV® parts certificate is not available or is NOT included in the scope of delivery. MOUNTING INSTRUCTIONS: The installation is carried out between the upper end of the spring and the spring plate. Make sure that the brake line is long enough Make sure that the shock absorber is long enough. Check the headlight setting. The permissible height of the coupling ball must be observed. If there is a load-dependent headlight adjustment, e.g. for LED lights, this must be checked and, if necessary, adjusted or changed/extended. If a new measurement or calibration of the sensors of the driver assistance system is necessary due to the changed vehicle geometry of the vehicle, this must be carried out according to the specifications of the vehicle manufacturer. For vehicles with load-dependent brake pressure regulator, this must be readjusted to the empty level (according to the vehicle manufacturer's specifications). After retrofitting, the axle geometry of the vehicle must be measured and, if necessary, corrected according to the vehicle manufacturer's specifications.
Prices incl. VAT;