Wheel set Dotz Dakar Steel Rim and BFGoodrich All Terrain Tire  A bigger footprint with Dotz Dakar Steel Rims and BFGoodrich All Terrain tires not only suits Defenders, G-Wagons etc. but also the Jimny II GJ HJ, turning tiny Jimny into Big Jim. The fact that the Dotz Dakar has become a classic for all kinds of 4x4‘s is no accident. The steel rim with its timeless design and its high-quality manufacture is tough to beat when it comes to performance, be it a Sahara rally or a weekend trip. Dotz 4x4 designed this rim to be hardwearing and robust above everything else. Whenever the Dakar is released as a new vehicle, you can be sure it has undergone the most rigorous testing regime, giving you the highest quality and extreme durability. The Dotz Dakar is quickly cleaned by hand or pressure washer and due to its special finish it will be very easy on the eye for a long time – something that can’t be said of many steel rims. We are introducing the Dakar’s off-road performance and its classic look now also for the Jimny II GJ HJ and offer the rim with sizes  7x16 inches  with an offset of 0 mil.  A great rim needs an equally great tire and with the BFGoodrich All Terrain there’s no doubt that it’ll be up to the challenge. As a proven all-season multi-purpose tire, the latest T/A KO2 generation boasts even more improvements and better test results over its predecessor: the tire’s sidewalls are 20% more robust, durability doubles on gravel and adds another 15% on asphalt. Traction is also improved with an increase of 10% and 19% for slush/mud and snow, respectively. As far as the look is concerned the tire can be mounted with the white print to the in- or the outside. Certification documents are included. The wheel sets are available with or without spare wheel. The tire is suitable and permitted for winter use. Size:Rim 7 x 16" ET 0.0 Silver wie tire size 225/75R16*Rim 7 x 15" ET 0.0 Silver with tire size 215/65R16 * Required Modifications for 16” Wheel Set This wheel set size requires a suspension raising kit. The speedometer requires a ratio adapter. The wheel arch covers need to be adapted. Please let us know when ordering whether the white lettering is to be mounted inside or outside.

Speedometer calibration kit for Suzuki Jimny from 2018 (Type GJ und HJ) This tachometer calibration kit can be used to correct the speed display and distance counter for vehicle conversions with a tire roll circumference that differs significantly from the series.Changes to the differential or larger tire roll circumference can thus be made acceptable.The ABS / ESP control unit sends a speed signal to the instrument cluster via CAN bus. The speedometer calibration kit is installed in front of the instrument cluster and corrects both the speed signal and the odometer in real time. The correction factor can be programmed via USB interface. The original wheel speed signals are retained. The function of the ABS / ESP control unit can therefore not be impaired. Technical specifications:EC type approval: E1 10R-036407Correction factor: 1-255%Default: 106%Power supply: 6-30V DCPower consumption sleep mode: 10 mACurrent consumption max .: 35 mATemperature range: -40 ° C / + 125 ° CDegree of protection: IP68 Also available for other vehicles on request.

Adjustment adapter SpeedoHealer  When fitting new tire sizes, modern vehicles with a factory-integrated speedometer usually have a speedometer discrepancy, as this is often not configurable. In the long run, the incorrect speed indication is annoying and sometimes causes an incorrect total mileage (the odometer goes wrong) and consequently even a poorer resale value of the vehicle. The SpeedoHealer speedometer alignment is an inexpensive solution to avoid this problem. Suitable for TD5 vehicles from MY1998 to 2007 The alignment adapter is simply connected to the green speedometer sensor located on the transfer case of the Defender. The SpeedoHealer then detects the correct speed from the output pulse of the speedometer sensor. Functions of the SpeedoHealer: Speedometer adjustment or elimination of inaccuracy of the original speedometer.Conversion of kilometers to miles or miles to kilometers (useful for a vacation abroad or for imported vehicles)Accurate indication of the maximum speed driven at the push of a buttonNeutralization of the speed limiter on some vehicles

Adjustment adapter for electric speedometer / odometer When fitting new tyre sizes, modern vehicles with a factory-integrated speedometer usually have a speedometer discrepancy, as this is often not configurable. In the long run, the incorrect speed indication is annoying and sometimes results in an incorrect total kilometre reading (the odometer goes wrong) and consequently even in a poorer resale value of the vehicle. The speedometer adjustment with the adjustment adapter is an inexpensive solution to avoid this problem.Technical data:Power supply: 9 - 28 voltsQuiescent current consumption: 4.6 mA at 13.8 volts power supplyInput signal: min. 2 volt peak, potential-independent, max. 4.5 kHz at 12 volt input signal or max. 1.6 kHz at 5 volt input signalOutput voltage: square-wave signal equal to the operating voltage minus 1.3 volts, maximum 13.1 volts, maximum 5 kHzSecond output stage with sine wave signal