Speedometer calibration kit for Suzuki Jimny from 2018 (Type GJ und HJ) This tachometer calibration kit can be used to correct the speed display and distance counter for vehicle conversions with a tire roll circumference that differs significantly from the series.Changes to the differential or larger tire roll circumference can thus be made acceptable.The ABS / ESP control unit sends a speed signal to the instrument cluster via CAN bus. The speedometer calibration kit is installed in front of the instrument cluster and corrects both the speed signal and the odometer in real time. The correction factor can be programmed via USB interface. The original wheel speed signals are retained. The function of the ABS / ESP control unit can therefore not be impaired. Technical specifications:EC type approval: E1 10R-036407Correction factor: 1-255%Default: 106%Power supply: 6-30V DCPower consumption sleep mode: 10 mACurrent consumption max .: 35 mATemperature range: -40 ° C / + 125 ° CDegree of protection: IP68 Also available for other vehicles on request.

Side skirts with aluminum steps The robust side skirts protect your Jimny off-road. The steps have been folded so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum Color: black powder-coated Size: 129x41x28 cm Weight: 7.80 kg  The aluminum slider is completely sufficient for light terrain. Scope of delivery:  Rock slider left & right mounting material 2x step-installation instructions TÜV certificate ... and with an indescribable look for free

The rock slider for the Jimny GJ and HJ Tight-fitting rock slider made of aluminum with steel holding structure.  To increase the rigidity of the slider panel, "dimple the" beads are pressed into the front.  Replaces the original plastic sill protection.  The steel holding structure is replaced by pressing in threaded rivets in the sill (attention, drilling out the existing holes from 8.5 mm to 9 mm necessary). On the underside, the retaining structure is held in position by clamping the sill rebate. The slider panel can be replaced separately if damaged, provided the substructure has not been damaged Sill fold protected. Our Rockslider is made of high-quality aluminum and black matt powder-coated. We opted for the lightweight design, so our Rockslider is a functional aluminum cab protection, therefore not suitable for a jack, but in medium-difficult terrain it is more than sufficient protection. The GJ Rockslider has received a general operating license (ABE). Each individual side skirts will be different after welding. Test gauges inserted to ensure a 100% fit. Scope of delivery:Rockslider left & rightGeneral operating license Facts: Weight complete set (driver & passenger side): 9.kg

CargoBear Roof Rack Crossbar Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks. The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper. If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material. Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space) Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all Cargobear 2 roof racks

Wind deflector suitable for CargoBear 2.0 Suzuki Jimny 2 (GJ) Material: aluminum, black matt powder-coated Incl. mounting material

Optimum sun protection solution for the Jimny II: The ClimAir SONNIBOY for more comfort, privacy and safety One of the many strengths of the Jimny II is its great 360 panoramic view, rare for a 4x4. But the large windows – relative to car size – have one big disadvantage: the heat build-up on hot days is considerable and that’s especially problematic for a car that is a preferred mode of transport for pets and working dogs. Whether with or without air conditioning, the ClimAir SONNIBOY sun and privacy screens make your vehicle on hot days much more comfortable when you’re driving, when the car is parked or when you have to leave children or pets behind while shopping for example. The three elements making up the SONNIBOY kit are tailor-made to fit rear and rear side windows of the Jimny II. Moreover, they simply click into a sturdy, hardly noticeable and easy to install fastening system. And since most Jimny II’s are real work horses, the privacy screen feature is also of great value. Tools, hunting equipment or sports gear are discreetly kept from prying eyes whereas dogs and other pets feel a lot calmer and less exposed. The all-round visibility for driver and passengers from the inside isn’t diminished either due to the material’s special surface structure. And when compared to dark window films, the obvious advantage is the fact SONNIBOY nets can be removed whenever you need to. SONNIBOY sun and privacy screens by ClimAir offer quality Made in Germany.

POWERspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit The POWERspec is the next stage up, ideal if you use your Jimny as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Jimny Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

 LOF Clutches ROADspec Suzuki Jimny 1.3 MY1998-2018, Clutch Kit The ROADspec is designed specifically for your Daily road going truck. If you do a bit of towing now and then, perhaps some light green laning or just use your truck as your commuter then the ROADspec has everything you need to keep you going for years to come. It’ll even take mildly tuned motors that have a little extra poke than standard! (Pedal Weight not significantly Heavier than original) DescriptionPerfect for vehicles with a Stage1 map/ Towing 1x LOF HD Drive plate, fitted with Woven organic friction 1x LOF HD ROADspec clutch cover, +20% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Suzuki Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

The Power Winch System Beta for the Suzuki Jimny The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes. Technical data: Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours Features: Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.

Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15   With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*. a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT) 1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping ) only 1 part certificate will be delivered, NO tyres, NO rims etc. ! the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery. the use of snow chains is not permitted ! there is NO brand binding for the tyres ! NO additional mudguard extensions are required ! it is NOT possible to send the certificate by e-mail or fax !    

Installation kit Suzuki Jimny GJ / HJ with Nolden 90 mm combination fog lights/daytime running lights Especially with hard-working off-road vehicles such as the Suzuki Jimny GJ, it is worthwhile converting completely or partially to LED headlights and lamps: they generally provide better light output, are less susceptible to damage and have a longer service life. With our complete installation kit consisting of Nolden 90 mm LED combination lights for daytime running lights and fog lights and the matching adapter cable, burnt-out, corroded or broken bulbs are a thing of the past. The Nolden combination lights combine both a daytime running light ring with fibre optic technology and an LED fog light in a high-quality chrome housing. Nolden uses high-quality LEDs from Osram, which are also extremely economical at 8.1 W for the daytime running light and 8.8 W for the fog light. Installation of the LEDs is extremely simple, with the appropriate adapter cables from PS13W socket to AMP Superseal plug for the daytime running lights included. The fog lights are plug & play. If you only need the adapter cables, you can find them here. The complete installation kit consists of two adapter cables and a set of Nolden 90 mm LED combination lights daytime running lights/fog lights. Scope of delivery: 1 x pair of Nolden 90 mm LED daytime running/fog lights chrome Adapter: 2 pieces PS13W socket 2-pin to AMP Superseal plug 3-pin.   Note:  The headlights also fit various Subaru models (including the Subaru Levorg), which are equipped with 90 mm combination headlights (fog and daytime running lights) as standard. Depending on the vehicle, it may be necessary to repin the plus and minus wires on the wiring harness for the daytime running lights (the easiest way to do this is at the Superseal connector).    

Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.

CargoBear Storage rack for Suzuki Jimny 2 (GJ/HJ), MY 2018 A volume of up to 863 liters will fit into the back of your Jimny GJ. Sounds like a lot for the size S hardcore off-roader. But wait: how much of it can you actually use? Only rarely will you load big items in one piece – let’s say a fridge for example – into the cargo space of the little 4x4 and that’s the problem. The Jimny is mostly a specialized working vehicle for farmers, forest workers and hunters. That means, there’s always lots of tools, fuels, lubricants, equipment, feed bags and dirty clothes that you don’t want to pile up on the small surface area of the cargo hold. Add animals – dead and alive – to the mix and you get the picture.Once we’ve spotted this particular problem, we immediately set to work on it and are now offering a mini-version of our CargoBear system specifically for the back of the Jimny GJ/HJ. This rack effectively partitions the narrow but high cargo space and lets you load many more items much more effectively. Rough and dirty things below, tools, equipment, jerry cans, boxes etc. on top of the shelf.As with our CargoBear roof racks, the cargo shelf is made from robust, powder-coated aluminum plates. Raised edges, non-slip perforation and a great number of lashing points guarantee 100% secure transport.When you’re installing our Tiny Bear cargo rack you can use the pre-existing screw holes. There’s no need for drilling new ones. But you should keep the spare seats in the back down or remove them entirely. Who’s packing back-seat passengers into a Jimny anyway?All fastening material is included.Material:Aluminum, powder-coated blackWeight:6,6 kgMax. load:up to 50 kg  

Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable  cable harness  complete cable winch control radio remote control (supplied without battery)  cable remote control mounting plate complete with installation material  installation material  installation & operating instructions  TÜV parts certificate.

The Suzuki Jimny II is small, agile, and a true off-road cult classic. Want good air circulation like with slightly open windows, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made specifically for the Jimny II from sturdy aluminum, offer just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping trips and adventure excursions with small luggage. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Ventilation panels on the driver and passenger sides must not be used while driving! Material: Aluminum Suitable for: Suzuki Jimny II (GJ & HJ) <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  

CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny –  due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs. The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces. The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories. The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety. The modules are supplied with all the necessary fastening material. Wind deflector and end carrier are included in the scope of delivery. Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc. Further keywords for this item: cargo-bear, cargobear, CargoBear, roof-rack, roof rack

All packed up for your trip? Of Course! But where is it? For your adventure vehicle to stay totally organized in the future and nothing to get lost inside your 4x4, we now offer this modular rear window organizer for the Suzuki Jimny 2 (type GJ and HJ). It is build from black powder-coated aluminum. This way your Jimny stays agile and organized at the same time. The panel is compatible with all of our MOLLE-products so you can mix and match however you like. The possibilities are endless. Be it a number of MOLLE bags, a first-aid kit or any kind of other gadget you would like to attach, this organizer makes it possible. Material: Aluminum, black powder-coatedDelivery: 1 pc vehicle panel incl. mounting materialSuitable on both sides Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!

Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.

Lifting suspension from TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lift is approx. 40-50 millimetres Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*.. SCOPE OF DELIVERY 1-SUJI2F1: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F2: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F3: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F4: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate Translated with www.DeepL.com/Translator (free version)

Wheel spacer for SUZUKI Jimny II Suitable for Jimny II type GJ from model 2018 and type HJ Only the following wheel/tyre combination is listed in the parts certificate: Wheel spacer from TREKFINDER 44 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacer from TREKFINDER 50 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacers from TREKFINDER 56 mm for 2 axles195/80 + 205/75 and 215/75R15 The Trekfinder 56 mm wheel spacer for 2 axles is available with and without mudguard widening. Colour: Trekfinder: silver aluminium

Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.

Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.

TREKFINDER underride guard for SUZUKI Jimny II type GJ BJ 2018 front axle suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all Vorderachsausführungen made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of  '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all rear axle versions made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM suitable for all Jimny models of the type GJ built from the end of  2018 and Type HJ suitable for all engine and transmission types from 3 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle

TREKFINDER complete protection for Suzuki Jimny II (GJ/HJ) - 5 parts, full safety suitable for all Jimny models of the type GJ built from the end of  2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel

TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.

TREKFINDER door protection - door handle shells for Suzuki Jimny II (GJ/HJ) The robust door handle moulding set from TREKFINDER reliably protects the sensitive areas around the door handles from scratches and damage - ideal for everyday and off-road use. Made from black plastic, suitable for the right and left side of the Suzuki Jimny II (model GJ from 10/2018 and model HJ).