Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-01, 6x16" The High Peak J-01 light alloy rim 16 inch is available in a clear retro style in three different colours.The robust rim is perfect for modern off-road vehicles.Specially designed for the Suzuki Jimny GJ/HJ, TÜV approved and strength tested.Also compatible with JB43 (1998-2018) models.Bolts on with standard or higher suspension. No additional modifications required (depending on tyre size).With TÜV parts certificate for Suzuki Jimny GJ / HJ    Rime size: 6x16"OFFSET : -5Bore / PCD : 5x139.7Finish : black matt, anthracite matt or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny 2 GJ/HJIf you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.de☎ +49 9181 466 644

Nakatanenga winch bundle Tigershark 9.5 or 11.5 for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch Tiger Shark 11500 / 9500  has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 11.5 / 9.5 electric winch has waterproof sealed relays for high electrical currents, allowing longer duty cycles.It is used for commercial recovery of rolling loads. Technical data of the Tigershark 9.5 winch: Rope speed: 5.7 - 1.2 [m/min].Pulling force: 4.3 tVoltage: 12 VWeight: 41 kgPower consumption at full load: 340 A  Technical data of the Tigershark 11.5 winch: Rope speed: 5.7 - 0.6 [m/min].Pulling force: 5.2 tVoltage: 12 VWeight: 42 kgPower consumption at full load: 410 A The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Bundle consisting of: 1x cable winch Tigershark 9.5 or 11.5 - please select the appropriate version1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate   impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

Lifting suspension by TREKFINDER for SUZUKI Jimny I Type FJ|the lifting is approx. 55 millimetres SUPPLY: 1-SUJIF1.1 BILSTEIN - not hardness adjustable - very tight tuning 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, B6 not adjustable, Made by BILSTEIN 2 pieces TREKFINDER shock absorber rear axle, B6 not adjustable, Made by BILSTEIN 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate SUPPLY 1-SUJIF1.2: KONI - height adjustable - comfortable to very tight tuning possible 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, heavy track 5-way adjustable, Made by KONI 2 pieces TREKFINDER shock absorber rear axle, Heavy Track 5-way adjustable, Made by KONI 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate Info KONI: The suspension or dampers are delivered from the factory in the most comfortable damper setting ( open ). Ideal for vehicles that are driven daily on and off the road without additional weights. Fine damping of bumps, asphalt edges, holes, curbs etc. WITHOUT being spongy. WITHOUT being spongy! For applications and wishes that make a harder shock absorber sensible (e.g. roof rack, cable winch, camping equipment etc.), 5 hardness levels are available with the KONI shock absorber in order to be able to individually tighten the shock absorber! The levels are clearly noticeable when driving. In our opinion, there is a suitable set-up for every application. OPTIONAL additionally available:- for level compensation and can be mounted once per spring, the TREKFINDER spring spacer rings 10 mm with Art. No. 1-FDR10- the reinforced steering damper from TREKFINDER with the Art. No. 1-SUJILD.1  

Nakatanenga Soft Shackle 10 mm – Breaking Strength 12,000 kg In principle, soft shackles are incredibly low tech: They are simple rope loops with a stopper knot and a fixed noose. The shackle is held together and tightened by the very load it is meant to hold and is easily opened or fastened. Maybe it is the very simplicity of the concept that accounts for some users’ skepticism and lets them stick to steel shackles even when using synthetic rope. But a rope shackle’s advantages are huge: there is hardly any risks for injury, very little weight, no tools necessary, no corrosion, no scratching or denting of vehicle or equipment parts und no bending or jamming under load.  As with all synthetic ropes, extra caution should be taken to avoid friction damage, fraying, heat and contact with chemicals. The rope shackles are available in grey and orange. Color: Grey, OrangeDiameter: 10 mmBreak strength: 12,000 kgRope elongation: 4,8%

Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.

Winch hook XL white / XXL white Often little attention is paid to an important detail on the winch: the hook. It is of crucial importance for the transmission of power between the winch and the anchorage point and must also be able to be operated safely in stressful situations. We offer two models from the industrial sector that shine with convincing detailed solutions: large radius of the hook so that even double straps can be securely hooked in twice large opening of the hook, it can be placed around most towbars stable cast iron snap (not made of thin sheet metal) that closes securely can be dismantled, thus simple assembly / disassembly of the rope without splicing, e.g. easy cleaning of the plastic rope possible large radius of the rope holder, so ropes with a large diameter and / or rope thimble can be used  Actual weight (XL): 0.750 kg Actual weight (XXL): 1.445 kg While the smaller model XL is designed for winches up to 10,000 lbs traction, the XXL models can be equipped with winches up to 18,000 lbs traction. The minimum breaking load is 18.000 kg or 32.600 kg. The hooks are made of alloyed, tempered steel, grade 8 and are painted. They are suitable for steel and plastic ropes with or without a thimble, the ropes can be installed without splicing. Please select the model. Please note: The delivered color may differ from the pictures.

Robust Winch Hook from Nakatanenga: 2000kg Load Capacity for 7-8mm Steel Cables – Safety in Every Recovery In demanding off-road use, forestry work, or agriculture, reliable recovery equipment is essential. A critical component of every winch is the winch hook, which establishes the connection between the winch and the anchor point. The Nakatanenga winch hook, with an impressive load capacity of 2000kg and specifically designed for steel cables with a diameter of 7-8mm, offers the safety and robustness you need in critical situations. High Load Capacity for Demanding Tasks With a maximum pulling load of 2000 kilograms (equivalent to 2 tons), this winch hook is a real powerhouse. It is designed to reliably withstand even demanding recovery operations or heavy pulling tasks. This high load capacity makes it a versatile tool for a wide range of vehicles and winches operating within the specified cable diameter range. Optimized for 7-8mm Steel Cables The specific design for steel cables with a diameter of 7 to 8 millimeters ensures an optimal fit and power transmission. This is crucial to ensure a secure and positive connection between the cable and the hook. Correct sizing also prevents unnecessary wear on the cable and the hook itself, thus contributing to the longevity of your entire winch setup. Robust Construction for Maximum Durability Made from high-quality, durable material, the Nakatanenga winch hook is designed to withstand the highest loads and harsh off-road conditions. The robust construction ensures a long service life, even with regular use in adverse weather conditions, mud, or contact with stones. A resistant surface coating also effectively protects against corrosion. Safety First – The Integrated Safety Latch An indispensable feature of this winch hook is the integrated safety latch (also known as a safety catch or gate). This mechanism reliably prevents the unintentional unhooking of the cable, recovery strap, or anchor point during winching operations. This is a crucial safety factor that minimizes the risk of accidents and enables a controlled recovery process. Versatile Applications Although perfect for off-road vehicle recovery, this winch hook also finds application in other areas. In forestry for skidding logs, in agriculture for pulling tasks, or for general tasks requiring the use of a winch with a 7-8mm steel cable, this hook provides valuable service. Nakatanenga – Quality You Can Rely On Nakatanenga stands for field-tested and durable off-road equipment. This winch hook seamlessly fits into this quality promise and has been developed to meet the high demands of off-road enthusiasts and professional users. The Nakatanenga winch hook with a 2000kg load capacity for 7-8mm steel cables is more than just a connecting piece. It is a guarantee for safety, reliability, and durability in all your winching operations. Invest in quality that pays off in the decisive moment and equip your winch with this robust hook from the Nakatanenga off-road shop.