Das könnte Sie auch interessieren
The Power Winch System Beta for the Suzuki Jimny The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes. Technical data: Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours Features: Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.
Prices incl. VAT;
Cable winch set for Toyota Hilux incl. 4.3 to tractive force cable winch 12V from 2016 onwards A cable winch system was designed for the Toyota Hilux, which is mounted behind the front cover of the vehicle. This system is ideal for use in rough terrain. In the design, particular attention was paid to minimising the load on the vehicle's own axle in the event of a self-recovery. Technical data: Transmission 3-stage planetary gear max. Tractive force 4300 kg max. Pulling speed 15 m/min* Motor power 3.8 hp Engine type Series Wound** Reduction ratio 110:1 Max. Power consumption 530 amps Voltage 12 V Rope (∅ x length) 10 mm x 30 m Drum (∅ x length) 63 x 223 mm Overall size (LxWxH) 574 x 160 x 225 mm Weight of cable winch 29.1 kg Weight of installation set 13.6 kg Total weight 42.7 kg Installation time 5 hours Features: Motor IP67 sealed by groove with sealing ring Freewheel lever Stainless steel cross braces Reinforced cable drum Powder-coated aluminium die-cast housing Motor/gearbox Internal drum brake with 3 brake shoes Removable control unit (so that the control unit can be installed as required) Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:Horntools grants a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer. This winch may generate more noise.
Prices incl. VAT;
Ähnliche Artikel
Durable and reliable: cable winch with maintenance-free gear brake In contrast to its predecessor, this model has a gear brake instead of a drum brake. The gear brake does not wear out compared to the drum brake and loses no braking effect when used for a long time. The cable winch has a 3-year guarantee, but with the right care can give you a lifetime of pleasure. Furnishing: Remote control 1x cable 1x radio integrated (delivered without battery)Synthetic winch rope - optionally in gray or orangePotted reinforced relay (contactor) waterproofstable powder-coated contactor housing made of deep-drawn sheet metalMotor & gearbox IP67 sealed by groove with sealing ringremovable control unit (so that the control can be installed as desired)Freewheel lever * gear neutral position made of stainless steelCross struts and equipment made of stainless steelreinforced rope drum ** (suitable for use with plastic ropes)powder-coated aluminium die-cast housing motor / gearboxtransmission brakeCable length: 1.6 mCable cross-section: 35 mm²3 year guaranteeoperation manual * A freewheel lever is used to decouple the gearbox and to unwind the winch quickly by hand. ** Plastic cables load the cable drums laterally by far more than steel cables Technical specifications: Working range voltage: 10-16 VoltMax. Power consumption 530 Amp **Train speed free of load 17 m / minuteTraction 4,300 kg **3-stage planetary gear 108: 1 geared downNet weight: 30 kg without rope and rope window4.6 KW Series Wound Motor *Drum (ØxLength): 63x216 mmOverall size (LxWxH): 612 x 160 x 270 mm * Series motor with electrically generated magnetic field power = with a standard 70 AH battery** Values can vary considerably, depending on the battery system, the winch can pull up to twice, the traction is designed for a standard 70 AH battery. With more powerful battery systems the pulling power must be limited by the current / voltage. Material The cable winch is made of aluminum and high-strength stainless steel. High strength so that the steel can withstand the loads. This steel can also oxidize, i.e. if the parts are exposed to salt in winter, you should care for them every now and then and let them in with a thin oil film. We have provided maintenance instructions in the download area. The pulling force of the winch is highest on the first or lowest rope layer on the drum. Similar to a bicycle gear shift. The less rope there is on the drum, the slower the winch pulls and the more power it has. Cable layer tensile speed1 4,300 kg 15 m / min2 3,500 kg 18 m / min3 2,950 kg 22 m / min4 2,550 kg 26 m / min Scope of delivery:1 x winch1 x winch rope - optionally in orange or gray1 x winch window1 x winch hook
Prices incl. VAT;
Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see table below! ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper!In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! Technical specifications: Engine:Motor power: 2,3 HPMotor type: permanent magnet (magnetic field is generated by means of a permanent magnet)Maximum power consumption: 180 ampsVoltage: 12 volts Transmission:3-stage planetary gearReduction: 166: 1 General data:Max pulling force: 2.300 kgMaximum train speed: 4 m / min (measured without load)Plastic rope (diameter x length): 6 mm x 25 mDrum (diameter x length): 63x139 mmOverall size (LxWxH): 465x158x215 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:- Cable remote control- rope window- fixing screws- Operation manual- hook TÜV for the following vehicle types: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2131 e2*KS07/46*0076* allM2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Cable winch set for Lada Niva / Taiga, including complete installation set The extremely robust bumper fits the original stops on the Lada.Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below! Technical specifications: Engine:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 166 : 13-stage planetary gear General data:Max pulling force: 3600 kgMaximum train speed: 5,5 m / min (measured without load)Plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmWeight winch 29 kgWeight installation set 21 kgOverrunning clutch (decoupling the gearbox to unwind the rope by hand) Included accessories:cable remote controlfairleadmounting screwsoperation manualhookBumpers spacers TÜV certificate for the following vehicles: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allMU2121 e2*KS07/46*0056* allMU2121 e2*KS07/46*0076* all M2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Cable winch set for Lada Niva / TaigaIncluding complete installation set The extremely robust bumper fits the original stops on the Lada. Now you have not only a winch holder, but a massive, shapely steel bumper, which was kept in the original design. The powder-coated bumper has a shackle holder (shackle included) and pickup points for a Farm Jack jack. ***Important!****Since the original alternator and the Lada battery are very small, we recommend one Upgrade at least the battery. Ask your Lada dealer about the possibilities. NOT SUITABLE FOR A LADA BRONTO with plastic bumper! In the version with aluminum bumper, the system fits! The grille must be cut out for new Ladas! WITH TÜV AND PARTIAL APPROVAL FOR GERMANY! The certificate applies to vehicles up to the year of construction: see below.In the case of other vehicle types, the TÜV must be contacted in advance as to whether the part is entered as the equipment carrier. Technical data cable winch:Motor: 3.8kW / 5.1 HPMotor type: Series wound motor (the magnetic field is generated electrically)Maximum power consumption: 320 ampsVoltage: 12 volts Transmission:Reduction: 210: 13-stage planetary gear Generally: Hornrope 7 to plastic rope (diameter x length): 10 mm x 30 mDrum (diameter x length): 63 x 227 mmOverall size (LxWxH): 570 x 180 x 243 mmNet weight: 32.8 kgGross weight: 35 kg Furnishing:Aluminum rope windowExtremely durable powder coatingStainless steel one-way clutch (decouple the gearbox to quickly unwind the rope by hand)Control box removable for mounting not directly on the winch Included accessories:Remote control with cableRope windowhookFixing screws 4xM10 We grant a 3-year guarantee on the gearbox and drum in compliance with the guarantee and service regulations. TÜV certificate is for the following vehicles: Vehicle type ABE / EG-BE no. Variant / version212140 e2 * 93/81 * 0183 * .. all212140 e2 * 98/14 * 0051 * .. all21214 e1 * KS * 0004 * .. all2121A e1 * KS * 0008 * .. all2121 e2 * 98/14 * 0183 * .. all2121 e2 * 2001/116 * 0260 * .. all2121 **** DA e2 * 2001/116 * 0326 * .. all2121DE e1 * KS07 / 46 * 0021 * .. allM2121 e2 * KS07 / 46 * 0011 * .. allN2121 e2 * KS07 / 46 * 0012 * .. allM2131 e2 * KS07 / 46 * 0077 * .. all
Prices incl. VAT;
Front winch system Suzuki Jimny GJ/HJ TÜV certificate for road approval in DE / AT The winch system with 2 tons traction was completely integrated. The small power pack is equipped with a 25 m plastic rope. Easily operated via radio or cable remote control, both of which are included in the scope of delivery. The winch assembly was designed so that the mounting kit only uses original attachment points from the vehicle, so there is no need to drill or flex. Scope of delivery: Cable winch 2 to 25 m plastic cable cable harness complete cable winch control radio remote control (supplied without battery) cable remote control mounting plate complete with installation material installation material installation & operating instructions TÜV parts certificate.
Prices incl. VAT;
Recovery rope, kinetic, incl. carrying bag Benefit bundle for off-road fans: High-quality kinetic recovery rope (either 19 mm or 24 mm diameter) in 8 m length - including robust mesh carrying bag. Ideal for safe and effective off-road vehicle recovery. Practical and space-saving storage.
Prices incl. VAT;
Kinetic mountain rope KERR If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: green (the rope is available in color orange here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.
Prices incl. VAT;
Mesh carrying bag for mountain ropes Our robust and easy-to-clean Polyester mesh bag was initially developed by our Nakatanenga textile shop to hold the kinetic tow ropes. The big Kinto rope with 8 m length and 24 mm width fits perfectly into this 60 x 35 cm bag. Apart from the ropes, this mesh bag is absolutely perfect for everything else that comes dirty and dripping: sports shoes and hiking boots, rain gear, training equipment, water sports, you name it. Using mesh as the primary material for bag, also means much nicer handling in comparison to ordinary closed materials. You can quickly pack wet and dirty ropes and let them drain and dry in the bag. That way, there is no chance for trapped moisture to contribute to any material deterioration and unpleasant moldy smells. You can also use the mesh itself to grab and handle excessively dirty equipment without having to use your bare hands, if nothing else is available. That comes in especially handy in emergency recoveries on the road, because you’re never as likely to carry all the dirt into your car’s interior. After the job is done, you can easily hose down the rope within the bag. Robust seams, a quality zipper, wrap-around handles and two orange loops for hanging or securing make this mesh bag one tough and durable receptacle for all your rough gear. Material: Polyester - washable up to 30° Dimensions: Width 60 cm Height 35 cm MADE IN EU
Prices incl. VAT;
Kinetic recovery rope KERR, 8m long If you are frequently recovering off-road vehicles stuck in mud, dirt or sand, kinetic recovery ropes are the ultimate solution. The decisive advantage these elastic synthetic ropes have over more rigid traditional straps or plastic ropes is their ability to store kinetic energy from the towing vehicle. This stored energy can build in the elastic rope and is then transferred continuously and smoothly to the trapped vehicle. Primarily, there are two positive effects when recovering cars or 4x4s with kinetic ropes. The rope’s elasticity compensates for sudden load peaks when the towing vehicle inadvertently jerks forward or transfers sudden jolts of force to the rope. This in turn means that the breaking strength of the rope won’t be tested as quickly and damages to vehicles or equipment are prevented. The second effect is that lighter vehicles can recover heavier ones, because the kinetic energy transferred from the towing vehicle can build in the rope until the resisting force is neutralized. The rope will stretch by an additional 30 to 35 %. The easiest method on both the rope and the vehicle recovery points is a slow and steady build-up of momentum until the rope snaps back and frees the trapped vehicle. Our rope allows for a safe temperature range from -70 to 99°C, which is highly superior to conventional ropes. Urethane-polymer coating makes our orange KINTO ropes highly water-, UV and abrasion-resistant. From a safety point of view, we would like to mention, though, that workload and breaking strength can be greatly reduced in damaged or overextended ropes. Taking good care of your rope is therefore highly recommended. Length: 8 mDiameter: 24 mmBreaking strength: 13 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange Length: 8 mDiameter: 19 mmBreaking strength: 8.6 tMaterial: 100% double weave Nylon / Polyamid 6.6, water-, UV- and abrasion-resistantElongation: 30-35%Temperature: -70°C to + 99°CColor: Orange (the rope is available in color olive here) You can find an ideal storage option here.A value bundle with rope and storage bag can be found here.
Prices incl. VAT;
Recovery Shackle (rear) for Land Rover Defender Td5 and Td4 Heavy-duty recovery shackle for Land Lover Defender, made from steel. Mounts to the rear bumper. Surface: zinc primer, black powder-coatedHolepattern: 85x45 mmMax. load: 10 t Incl. heavy-duty bolt with safety pinIncl. hardware
Prices incl. VAT;
These recovery shackles (2-piece) fit the front bumper of every Land Rover Defender 90/110/130, with and without A/C. They are available in a red powder coat, black galvanized or passivated. Assembly Information: For vehicles with A/C it is important to disassemble the grill, then mount the shackles and then reassemble. All the necessary hardware is enclosed in the package. Material Information: Passivating is the process of making metal, or another substance, unreactive by altering the surface layer or coating the surface with a thin inert layer. Max Load: 15 t Dimesions: Length: 100 mmWidth: 80 mmHight: 48 mmHole diameter: 22 mm Please chose the desired surface.
Prices incl. VAT;
The Swivel Stainless Steel Recovery Point from Nakatanenga: Safety and Flexibility Off-Road For demanding off-road drivers and professionals, reliable recovery gear is not just an option, but a necessity. The swivel stainless steel recovery point from Nakatanenga sets new standards here in terms of safety, durability, and flexibility. This indispensable accessory has been designed for the toughest applications and offers superior performance when it matters most. Maximum Robustness Thanks to High-Quality Stainless Steel Manufactured from first-class, rust-free stainless steel, this recovery eyelet defies the most adverse conditions. Whether mud, water, snow or road salt - corrosion doesn't stand a chance here. The solid choice of materials and precise workmanship guarantee extreme robustness and a high breaking load. For you, this means: absolute reliability even with high tensile forces and in critical recovery situations. Invest in a solution that is known for its durability and resistance, even with regular and intensive off-road use. Superior Flexibility Through 360° Swivel Capability The outstanding feature of this recovery eye is its 360° rotatability. The shackle or the recovery rope can therefore always be attached at the optimum angle without any unfavourable lateral loads acting on the eyelet or the vehicle structure. This is particularly invaluable in difficult, uneven terrain, where the vehicle to be recovered is often not ideally positioned. The rotating function minimises the risk of material fatigue, prevents shackles from jamming and significantly increases the safety and efficiency of the entire recovery process. It enables optimum power transmission at all times. Secure Mounting and Thoughtful Design Nakatanenga's swivelling stainless steel lifting eye is not only extremely stable and flexible, but also cleverly designed for secure mounting on your off-road vehicle. The mounting points should be selected in such a way that optimum force transmission into the vehicle frame is guaranteed. They are designed so that they can usually be attached to original mounting points, which simplifies installation and preserves the integrity of your vehicle. Rounded edges can also contribute to optimised pedestrian protection and improve overall handling. A Must-Have for Every Ambitious Off-Roader Whether for expeditions, professional use in forestry and hunting, competitions or simply for demanding leisure tours - a high-quality, swivelling recovery eye made of stainless steel should be part of the basic equipment of every off-road vehicle. It offers the decisive plus in safety and flexibility to master even seemingly hopeless situations. Rely on the swivel stainless steel recovery point from Nakatanenga – your strong and flexible partner for all recovery maneuvers. Equip your vehicle with this premium component and be perfectly prepared for all eventualities off-road. Discover the right version for your vehicle in the Nakatanenga Off-Road Shop now!
Prices incl. VAT;
HD shackle "Orange Pin" High-tensile shackle "orange pin" with collared pin, rated for 3.25 tonnes, minimum breaking load 16 tonnes, bolt diametre 18 mm. Important notice: the omega-shaped shackle allows for easier lacing and secure use with recovery ropes and tree straps as these are not "squashed" to the same degree as with conventional shackles. Please note:The color of the bolt may differ from the color shown.
Prices incl. VAT;
Stainless steel shackle 16mm / 2750kg Shackle for recovering a vehicle, universally usable for attaching a pulley, a tree anchor strap or to a trailer hitch. At least two of them belong in every "species-appropriate" off-roader!Technical data:Material: stainless steelDiameter: 16 mmLoad capacity: 2750 kgBreaking load: 16500 kgType: optionally omega or straight
Prices incl. VAT;
Stainless steel shackle 22mm / 4750kg Shackle for recovering a vehicle, universally usable for attaching a pulley, a tree anchor strap or to a trailer hitch. At least two of them belong in every "species-appropriate" off-roader!Technical data:Material: stainless steelDiameter: 22 mmLoad capacity: 4,750 kgBreaking load: 28,500 kgDesign: straightThis heavy duty shackle is suitable for particularly heavy vehicles such as Land Rover Defender 130 with heavy cabin, Laplanders, Bremach, Iveco Daily etc.
Prices incl. VAT;
Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.
Prices incl. VAT;
Practical tool bag What’s the best way to transport your tools and equipment? Case, box or bag? A bag will offer great advantages on the road, especially if it is as tough and high quality as our new Nakatanenga Bag. It is flexible, needs hardly more space than the actual contents and adds little extra weight on top. That makes our bag ideal to quickly pack, transport or store your gear, even in small spaces. Heavy items aren’t a problem either due to the strengthened bottom of the bag, the wrap-around straps and the quality YKK zipper. And since bags are naturally less organized than cases or boxes, we have added four extra pockets on the inside, creating perfect spaces to store smaller objects separately. Our Nakatanenga tool Bag is the ideal partner for jobs on the road: Small, light, robust and flexible in its use. Material: 100% Nylon PU coatingZipper: YKK DELIVERY WITHOUT CONTENTS! And by the way: At Nakatanenga, we are exclusively using materials with 100 % Nylon PU coating for all our textile products. In contrast to PVC, Nylon PU (Polyurethane) contains no harmful, phthalate-based softeners. Until recently, lower-molecular-weight phthalates have been the primary choice for plasticizers in synthetic materials, even in food products and cosmetics. Phthalates accumulate in the environment, however, and are suspected to act like hormones due to their molecular similarity. Toxicologically, this is highly alarming, because it is assumed that these chemicals can cause many diseases, including cancer. For the coating of our Nakatanenga textile products, it is therefore no question for us to exclusively use non-toxic, ecologically sound alternatives that pose no health risks, like Nylon PU.
Prices incl. VAT;
Nakatanenga soft shackle 10mm - breaking strength 12.000kg
Nakatanenga Soft Shackle 10 mm – Breaking Strength 12,000 kg
In principle, soft shackles are incredibly low tech: They are simple rope loops with a stopper knot and a fixed noose. The shackle is held together and tightened by the very load it is meant to hold and is easily opened or fastened. Maybe it is the very simplicity of the concept that accounts for some users’ skepticism and lets them stick to steel shackles even when using synthetic rope. But a rope shackle’s advantages are huge: there is hardly any risks for injury, very little weight, no tools necessary, no corrosion, no scratching or denting of vehicle or equipment parts und no bending or jamming under load.
As with all synthetic ropes, extra caution should be taken to avoid friction damage, fraying, heat and contact with chemicals.
The rope shackles are available in grey and orange.
Color: Grey, Orange
Diameter: 10 mm
Break strength: 12,000 kg
Rope elongation: 4,8%