Lifting suspension TREKFINDER for SUZUKI Jimny I +55 mm

The Power Winch System Beta for the Suzuki Jimny The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes. Technical data: Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours Features: Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal Scope of delivery: Installation set Cable winch Aluminium cable window Fastening screws Plastic rope with hook Pulley with hook Cable remote control Radio remote control Operating instructions TÜV parts certificate Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.

Steering damper kit TREKFINDER for Suzuki Jimny I type FJ until 2018 the mounting of the steering damper is done on the frame and the tie rod, by means of special heavy duty mounting kits, with conceivably easy installation drilling, welding, deburring, painting etc. is NOT necessary for the installation of our steering damper optimal angle of attack to the steering rod by mounting with frame kit and at rotatable track rod angle, NO mounting at the thin gusset plate of the towing lug direct response due to the high stiffness of both mounting kits, no "bending" or "turning" as with other mounting points e.g. towing lug plate etc. very well suitable for Jimny`s WITH and WITHOUT height or lowering suitable for ALL Jimny I models (gasoline + diesel and 2/4WD) below in the text the models/the area of application are still separately specified (see KFZ certificate) the Foam Cell technology in the twin-tube damper with 35 mm piston rod and maximum volume, prevents the mixing of gas molecules in the oil, guarantees a long life and a perfect performance in ON- u. OFFROAD OPERATION track adjustment is NOT required after installation fits in combination with ALL engine and underride guards known to us SCOPE OF DELIVERY: 1 piece TREKFINDER steering damper/foam cell1 piece TREKFINDER mounting kit steering rod/galvanized1 piece TREKFINDER mounting kit frame/galvanized1 piece installation and assembly instructions1 piece TÜV® parts certificate The following area of application is listed in the parts certificate: Vehicle manufacturer: SUZUKI ( J ) Jimny / SANTANA ( E ) Jimny ConvertibleVehicle type: FJTrade name: Jimny / Jimny CabrioEC TG No.: e6*XXXX/XXX*0056*.. / e9*XXXX/XXX*0034*..

Side skirts with aluminum steps or steel The robust side skirts protect your Jimny off-road. The kicks were chamfered so that you don't get caught anywhere. The side steps are mounted on the original attachment points. Material: aluminum / or steelColor: black powder-coatedSize: 129x41x28 cmWeight: 7.60 kg / 22 kg

Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.