Suspension
VB Air Suspension - Air Suspension for Land Rover Defender 90/110/130
VB Air Suspension - Air suspension for Land Rover Defender 90/110/130 Air suspension for Land Rover Defender 90/110/130.Optionally for rear axle or front and rear axle.The VB Air Suspension System is only sold incl. (chargeable) installation in our company - for this we offer fixed prices.
Prices incl. VAT;
HD Lift Kit for Land Rover Defender 110 (Heavy Duty)
HD suspension for Land Rover Defender 110 (for heavily loaded rear axles) Set consists of: 1x TREKFINDER coil springs 2x front axle shock absorbers 2x holder for additional spring, rear, bottom 2x bracket for additional spring, rear, top 1x lift spring set for Land Rover Defender 110 2x shock absorber Koni HeavyTrack RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint. Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.
Prices incl. VAT;
Liftkit Defender 130 by TREKFINDER
Suspension for Land Rover Defender 130 Set consists of: 1x TREKFINDER coil springs 1x lift spring set 2x shock absorbers for Land Rover Defender 90 / 110 / 130 2x shock absorbers Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint. Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.
Prices incl. VAT;
Liftkit Defender 130 by TREKFINDER (Lightweight)
Suspension for Land Rover Defender 130 Lightweight Set consists of: 1x TREKFINDER lift spring set for Land Rover Defender 1102x shock absorber for Land Rover Defender 90 / 110 / 130 front axle2x shock absorber Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint. Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.
Prices incl. VAT;
Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid +20/0 millimeter
Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery: 4 pieces TREKFINDER coil spring progressive 4 pieces TREKFINDER shock absorber KONI Raid 1 piece TREKFINDER sticker 1 piece parts certificate
Prices incl. VAT;
Liftkit for Defender 90 with KONI Heavy Track RAID Dampers (+40mm) - by TREKFINDER
Lifting suspension TREKFINDER for Land Rover Defender 90 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetres lift ZTo optimise the Land Rover Defender 90, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible suspension optimisation solution. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery: 4 TREKFINDER coil springs 4 TREKFINDER shock absorbers 1 TREKFINDER sticker 1 piece parts certificate Due to the increased articulation angle of the front propshaft caused by the lift, we recommend the installation of a propshaft with double joint. Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.
Prices incl. VAT;
Liftkit for Defender 110 with KONI Heavy Track RAID Dampers (+40mm) - by TREKFINDER
Lifting suspension TREKFINDER for Land Rover Defender 110 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetre lift To optimise the Land Rover Defender 110, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible solution for suspension optimisation. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery:* 4 TREKFINDER coil springs * 4 TREKFINDER shock absorbers * 1 TREKFINDER sticker * 1 parts certificate Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint. Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.
Prices incl. VAT;
Installation Flat Rate VB Air Suspension for Land Rover Defender
Installation of the VB Air Suspension air suspension for the Land Rover Defender Td4 and Td5 90/110/130. Appointment by arrangement. On request, we also offer the TÜV demonstration incl. preparation of the modification report at a fixed price. Please select the appropriate option.
Prices incl. VAT;
Lifting suspension TREKFINDER for SUZUKI Jimny II +40-50 mm, type GJ / HJ
Lifting suspension from TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lift is approx. 40-50 millimetres Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*.. SCOPE OF DELIVERY 1-SUJI2F1: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F2: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F3: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F4: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;
Nakatanenga Heavy-duty 24 Spline Front axle Shaft with CV Joints and HD Drive Flanges
Highest load capacity This kit consists of two half shafts, two CV joints and two heavy-duty drive flanges. The Raptor Heavy Duty front shafts are made from SAE4340 Nickel Chromoly alloy steel, that provide the optimum level of strength and flex when heat-treated. They have the ability to twist without breaking as well as extremely high fatigue resistance, which enables the shafts to tolerate repeated shock loading. This ability to flex without breaking also helps protecting other drivetrain components. All shafts are 24 spline and primarily suited to post 1994 axles, although they can be fitted to earlier vehicles with additional work. Please note that MY2002 vehicles have been delivered with both types of rear axle - please check which axle has been fitted to your vehicle. Please choose your axle type. The shafts are for following vehicle models:HSVOKIT-ABS: for 90/110/130 Defender, Discovery 1 and Range Rover Classic 1994 on WITH ABS CV JOINTSHSVOKIT-STD: for 90/110/130 Defender, Discovery 1 und Range Rover Classic 1994 on NON ABS CV JOINTS
Prices incl. VAT;
Lifting suspension TREKFINDER for SUZUKI Jimny I +55 mm
Lifting suspension by TREKFINDER for SUZUKI Jimny I Type FJ|the lifting is approx. 55 millimetres SUPPLY: 1-SUJIF1.1 BILSTEIN - not hardness adjustable - very tight tuning 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, B6 not adjustable, Made by BILSTEIN 2 pieces TREKFINDER shock absorber rear axle, B6 not adjustable, Made by BILSTEIN 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate SUPPLY 1-SUJIF1.2: KONI - height adjustable - comfortable to very tight tuning possible 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, heavy track 5-way adjustable, Made by KONI 2 pieces TREKFINDER shock absorber rear axle, Heavy Track 5-way adjustable, Made by KONI 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate Info KONI: The suspension or dampers are delivered from the factory in the most comfortable damper setting ( open ). Ideal for vehicles that are driven daily on and off the road without additional weights. Fine damping of bumps, asphalt edges, holes, curbs etc. WITHOUT being spongy. WITHOUT being spongy! For applications and wishes that make a harder shock absorber sensible (e.g. roof rack, cable winch, camping equipment etc.), 5 hardness levels are available with the KONI shock absorber in order to be able to individually tighten the shock absorber! The levels are clearly noticeable when driving. In our opinion, there is a suitable set-up for every application. OPTIONAL additionally available:- for level compensation and can be mounted once per spring, the TREKFINDER spring spacer rings 10 mm with Art. No. 1-FDR10- the reinforced steering damper from TREKFINDER with the Art. No. 1-SUJILD.1
Prices incl. VAT;
Heavy Duty Front Prop Shaft with centred double joint for Defender 90/110/130, Td4 from MY07
Heavy Duty Cardan shaft Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly for Defender 90/110/130, Td4 from MY07. This heavy duty prop shaft is recommended for vehicles with body lift or as a replacement for a failed prop shaft. For steady, smooth driving even with high articulation angle. Comes with suitable flange assembly with seals etc. for transfer case.
Prices incl. VAT;
Heavy Duty Prop Shaft - fron axle - with centred double joint and flange assembly, for Land Rover Defender
Heavy Duty Cardan shaft - Land Rover Defender Tdi / Td5 Heavy Duty GKN Prop Shaft - front axle - with centred double joint and flange assembly, for Land Rover Defender. GKN double joint prop shaft, fits Defender 90/110/130, for Tdi and Td5 up to MY07, with flange assembly. This heavy duty prop shaft is recommended for vehicles with body lift or as a replacement for a failed prop shaft. For steady, smooth driving even with high articulation angle. Comes with suitable flange assembly with seals etc. for transfer case.
Prices incl. VAT;
Underride protection kit TREKFINDER for SUZUKI Jimny 2 type GJ and HJ 5-piece
TREKFINDER complete protection for Suzuki Jimny II (GJ/HJ) - 5 parts, full safety suitable for all Jimny models of the type GJ built from the end of 2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel
Prices incl. VAT;
Lowering spring kit for INEOS Grenadier from TREKFINDER - 30 mm
Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate
Prices incl. VAT;
Heavy Duty Suspension for Land Rover Defender 110, with Commercial HD Shock Absorbers
Heavy Duty Suspension for Land Rover Defender 110, with Commercial HD Shock Absorbers Heavy Duty suspension for Land Rover Defender 110, with Commercial HD shock absorbers - with 4 springs (+30 mm) and 4 Terrafirma Commercial HD shock absorbers.In contrast to the individual components, you have a price advantage here with the complete suspension.
Prices incl. VAT;
Set of parabolic springs incl. dampers for Land Rover Series II, IIA and III 88" and 109".
Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force. The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts. Scope of supply: 2 x Parabolic Springs - 2 or 3 sheet 2 x Cellular Dynamic long travel shock absorbers 2 x Angle correction wedges
Prices incl. VAT;
Heavy Duty Suspension for Land Rover Defender 90, with Commercial HD Shock Absorbers
Heavy Duty Suspension for Land Rover Defender 90, with Commercial HD Shock Absorbers Heavy Duty suspension for Land Rover Defender 90, with Commercial HD shock absorbers - with 4 springs (+30 mm) and 4 Terrafirma Commercial HD shock absorbers.In contrast to the individual components, you have a price advantage here with the complete suspension.
Prices incl. VAT;
Lifting spring kit for INEOS Grenadier from TREKFINDER WITH cable winch + 30 mm
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Lifting spring kit for INEOS Grenadier from TREKFINDER WITHOUT cable winch + 30 mm
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
TREKFINDER Height Adjustment Spring Set LAND ROVER NEW Defender with Coil Springs
TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate
Prices incl. VAT;
Lowering Kit for LAND ROVER Defender 110 by TREKFINDER (- 40mm)
Sportier Look and Optimized Handling: The TREKFINDER Lowering Spring Kit -40mm for Your Defender 110! You love your Land Rover Defender 110 for its robustness and character, but do you wish for a more direct driving feel on the road, improved road holding, and an even more striking, individual appearance? Then we have exactly what you need: the TREKFINDER lowering spring kit for your Defender 110, which lowers it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a significantly more dynamic and planted look but also noticeably optimize its handling on paved roads. Reducing the vehicle height lowers the center of gravity, which can lead to more agile handling and less body roll in corners. Why TREKFINDER Lowering for Your Defender 110? Improved Road Holding: Experience a more stable and precise driving feel, especially in corners and at higher speeds. Sporty, Striking Look: Give your Defender 110 an individual, lower look that makes it stand out from the crowd. More Direct Turn-in: Benefit from a more agile response of your vehicle to steering inputs. Easier Entry: The lower vehicle height can make getting in and out, as well as loading the roof, easier. High-Quality Springs: The specially developed springs are designed to offer an optimal balance between a sportier driving feel and good remaining comfort. Progressively Wound Springs: The lowering is approx. 45 mm on the front axle and approx. 40 mm on the rear axle. Standard Shock Absorbers Can Still Be Used: In most cases, the original shock absorbers can still be used. However, for maximum performance and to maintain optimal spring travel, we recommend combining them with suitably adapted, shorter sports shock absorbers. TÜV Parts Certificate Included: For hassle-free registration, a TÜV® parts certificate is, of course, included. Parts certificate made by H&R. What's Included in the Set? 4 TREKFINDER coil springsThe springs are made from high-strength material 54 CrSi6 - the surface has been solidified by shot peening, zinc phosphated, and polyester coated. 1 TÜV® parts certificate This lowering spring kit is suitable for various Land Rover Defender 110 models (please refer to the enclosed parts certificate for exact model compatibility). ATTENTION: The rear axle load must be reduced to 1,800 kg! Body roll is significantly reduced. Suspension comfort is not impaired. Agility during turn-in, etc., is significantly improved. Your Defender. Your Style. Your Performance. With the TREKFINDER lowering spring kit, you're investing in a more individual appearance and optimized handling for your Land Rover Defender 110. Redefine your Landy's presence and enjoy an extra boost of driving dynamics in everyday life and on journeys. Do you have questions about installation or the ideal combination with suitable shock absorbers? Just contact us – we at Nakatanenga are happy to advise you comprehensively!
Prices incl. VAT;
Comfort spring set TREKFINDER for LAND ROVER Defender 110 until MY 2016, with VA +20 / HA +0 millimetres
Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016
Prices incl. VAT;
Lift-Kit for Land Rover Defender 110 (+40mm) - by Trekfinder
Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.
Prices incl. VAT;
Lift-Kit for Land Rover Defender 90 (+40mm) - by Trekfinder
More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!
Prices incl. VAT;
Nakatanenga Heavy-duty 24 Spline Rear Half Shaft with HD Drive Flanges
For maximum off-road performance This kit consists of two half shafts and two heavy-duty drive flanges. The Raptor Heavy Duty rear shafts are made from SAE4340 Nickel Chromoly alloy steel, that provide the optimum level of strength and flex when heat-treated. They have the ability to twist without breaking as well as extremely high fatigue resistance, which enables the shafts to tolerate repeated shock loading. This ability to flex without breaking also helps protecting other drivetrain components. All shafts are 24 spline and primarily suited to post 1994 axles, although they can be fitted to earlier vehicles with additional work. Please note that MY2002 vehicles have been delivered with both types of rear axle - please check which axle has been fitted to your vehicle. Please choose your axle type. The shafts are for following vehicle models:HSHIKIT-SAL: for 110/130er Defender 1994-2002 with SALISBURYHSHIKIT-P38: for 90er Defender, Discovery 1, Range Rover Classic 1994 on AND for 110/130er Defender 2002 on
Prices incl. VAT;
Heavy Duty Suspension for Land Rover Defender 110, with All Terrain Shock Absorbers
Heavy Duty Suspension for Land Rover Defender 110, with All Terrain Shock Absorbers Heavy Duty Suspension for Land Rover Defender 110, with All Terrain Shock Absorbers - with 4 Springs (+30 mm) and 4 Terrafirma All Terrain Shock AbsorbersIn contrast to the individual components, you have a price advantage of over 50,00€ with the complete suspension.
Prices incl. VAT;
Heavy duty rear prop shaft with 25° articulation angle - rear axle - Defender 110 Td4 from MY07
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 110 Td4 from model year 2007 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 110 Td4 from MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Heavy duty rear prop shaft with 25° articulation angle - rear axle - Defender 90 Td4 from MY07
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 90 Td4 from model year 2007 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90 Td4 from MY07 rear axles. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Heavy duty front prop shaft with 25° articulation angle - front axle - Defender 90/110/130 Td4 from MY07
Reinforced drive shaft with 25° articulation angle - front axle for Defender 90/110/130 Td4 from model year 2007 Heavy duty front prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits front axles on all Defender 90/110/130 Td4 from MY07. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;
Heavy duty front prop shaft with 25° articulation angle - front axle - for Defender 90/110/130 Td5/Tdi
Reinforced drive shaft with 25° articulation angle - front axle for 90/110/130 Td5/Tdi Heavy duty front prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 90/110/130 Td5/Tdi front axles. For all other Defnder or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only!
Prices incl. VAT;
Heavy duty rear prop shaft with 25° articulation angle - rear axle P38 - Defender 110 Td5 from MY02 to MY06
Reinforced drive shaft with 25° articulation angle - rear axle for Defender 110 Td5 (P38) model year 2002-2006 Heavy duty rear prop shaft with 25° articulation angle.Heavy duty greasable universal joints.Triple sealed sleeve with 110 mm travel.60 mm tubing. All service parts availbale off the shelf. This prop shaft fits all Defender 110 Td5 from MY02 to MY06 with P38 rear axle. For all other Defender or Discovery models this prop shaft is available with a very short lead time (3-4 days). Made in Germany! Picture for illustration only.
Prices incl. VAT;