Das könnte Sie auch interessieren
Ready for winter: Complete wheel set with Weathermaster WSC on sturdy Borbet CW7 rims BF Goodrich All Terrain T/A KO2 275/55R20 – The classic for road and off-road use Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18" Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Heater Engine Resistor OEM Land Rover Series III Triumph GT6 TR4 TR6Reference number 7H6926.
Prices incl. VAT;
TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate
Prices incl. VAT;
Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair
Prices incl. VAT;
Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.
Prices incl. VAT;
Correction wedges 3° for leaf spring axles - for optimising the axle geometry If you raise your car’s suspension or exchange your original shocks, most of the time axle or wheel geometry, i.e. caster or camber angles, will get out of alignment. To correct aberrations on axles with leaf springs, especially our 3-leaf parabolic springs for the 88” rear axle Land Rover Series II, IIA und III, we are now carrying these caster correction wedges. The wedges provide 3° correction and have a 13 mm pin opening.
Prices incl. VAT;
Progressive additional spring kit for Defender 110 incl. bracket TREKFINDER inner spring kit - optional for the rear axle with TREKFINDER suspension lift installedSuitable for the following TREKFINDER suspensions:Defender 110: 1-888 1-888110T Defender 130: FWTREK130 (these springs are already included in this set) FWLWTREK130 Important note:This inner spring kit was developed exclusively for retrofitting in the above-mentioned TREKFINDER suspensions.Use in other suspension systems has not been tested and is therefore not permitted.There is no separate parts certificate for the inner springs, as they are already listed as an option in the corresponding TREKFINDER suspension reports.Please note:The innersprings do not allow any weight to be added.This set consists of:- 1x TREKFINDER coil springs inside rear axle progressive- 2x brackets for additional springs, rear, top- 2x brackets for additional springs, rear, bottomThis set conists of:1x TREKFINDER Coil Spring Set2x Upper Supports2x Lower Supports
Prices incl. VAT;
ANR-Classic - the rim for the Defender. 8x16-Inch steel in such an classical look, that this rim could be easily termed as the earliest form of the Defender rim. But looks are not everything - the max load of 1160 also impresses. The rims provide an optical broadening of the vehicle, which seems only subliminal, because it still emphasises the classic look of the vehicle. Fits all Land Rover Defender models built until 2016. The ANR-CLASSIC 8X16 inch Zero-Offest / ET0 is produced for Nakatanenga and only available at Nakatanenga and at our reseller. Data sheet:Tyre size: 8X16"Offest: 0 (zero)Max Load: 1,160 kgBolt circle: 165.1 mmCentre Hole: 113 mmCentering: Bolt centering Surface and prices:- black primed - black painted, RAL 9005- white painted, RAL 9010 - white powder coated, RAL 9010 For almost all Defenders ; incl. TÜV certificate.2,25 L Petrol 55 KW (75 PS) - 2,25 L Diesel 45 KW (60 PS)2,5 L Petrol 63 KW (83 PS) - 2,5 L Diesel 50 KW (67 PS)Rover V8 3,5 L Petrol 84 KW (115 PS) und 101 KW (135 PS)2,5L Turbodiesel 63 KW (83 PS) - 200 Tdi 2,5 L 80 KW (107 PS)300 Tdi 2,5 L 83 KW (113 PS) - Td5 2,5 L 91 KW (122 PS)Td4 2,4L 91KW (122 PS) - 2,2 Td Diesel 91KW (122 PS)4BD1 3,9 L 73 KW (98 PS) Approved for following tyre sizes:245/70 R 16 255/65 R 16 255/70 R 16255/85 R 16265/70 R 16265/75 R 16275/70 R 16 285/75 R 16 295/75 R 16
Prices incl. VAT;
Set of parabolic springs incl. dampers for Land Rover Series II, IIA and III 88" and 109".
€539.00
Prices incl. VAT; / Parcel shipping
Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers
Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.
Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force.
The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts.
Scope of supply:
- 2 x Parabolic Springs - 2 or 3 sheet
- 2 x Cellular Dynamic long travel shock absorbers
- 2 x Angle correction wedges