Ähnliche Artikel

Lift-Kit for Land Rover Defender 90 (+40mm) - by Trekfinder

Spring lift-kit for Land Rover Defender 90, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains : * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.

Product number: 1-222

Weight: 25,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€699.00*

Additional spring kit standard, for Land Rover Defender 110 and 130

The additional spring kit for the rear axle of the Land Rover Defender 110 and 130 increases the spring rate and thus minimises the effects of high payloads. The kit consists of 2 additional springs, 2 upper brackets and 2 lower brackets. This kit is intended for vehicles that are permanently or predominantly driven with a high load. For vehicles that are driven with varying loads, we recommend the Progressive additional spring kit. Delivery without expert opinion, registration by individual approval is possible.

Product number: ZFKSTDH110130

Weight: 5,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€276.00*

Lowering Kit for LAND ROVER Defender 110 by TREKFINDER (- 40mm)

Lowering Kit for a Land Rover Defender 110 by TREKFINDER with progressively winded springs incl. TÜV parts-certificate. Made by H&R. The lowering kit reduces the ride height by about 45 mm in the front and 40 mm in the rear. The springs themself are maufactured from a special spring steel and polyurethane coated. The springs are designed to work with the stock dampers, but the load on the rear axel must be reduced to 1800 kg ! The springs guarantee a comfortable ride, while reducing body roll dramaticly and improving the handling. The scope of delivery: 4x Lowering Springs1x TÜV Parts-certificate.

Product number: 1-555

Weight: 27,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€849.00*

Das könnte Sie auch interessieren

Set Parabolic Springs incl. Shock Absorber for Land Rover Series II, IIA and III 88" and 109" Front

Set of parabolic springs incl. dampers for Land Rover Series II, IIA and III 88" and 109".

Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force. The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts. Scope of supply: 2 x Parabolic Springs - 2 or 3 sheet 2 x Cellular Dynamic long travel shock absorbers 2 x Angle correction wedges

Product number: PABOFE-88-109-VAM

Weight: 25,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €539.00*

Select version

Additional Suspension Kit - progressiv for Defender 110

Name: Additional Suspension Kit - progressiv for Defender 110
Brand: Nakatanenga
SKU: ZFKPROGTREK110
Price: 357.0 EUR
Availability: InStock

Progressive Additional Spring Kit for Defender 110

€357.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ progressiv ✔️ coils + supports ✔️ TREKFINDER ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Set

Product number: ZFKPROGTREK110

Weight: 7.5 kg

This set conists of:

1x TREKFINDER Coil Spring Set

2x Upper Supports

2x Lower Supports