Das könnte Sie auch interessieren
slide 7 to 9 of 4
Alpha 9.9 winch system for Suzuki Jimny FJ
€2,499.00*
The Power Winch System Beta for the Suzuki Jimny
The winch system was developed especially for the Suzuki Jimny and fits very well into its front. It is mounted on the original points of the vehicle. The Alpha 9.5 winch was developed especially for users who have little space available. Despite its compact design, the winch has a pulling force of 4.3 tonnes.
Technical data:
Gearbox: 3-stage planetary gearMax. Pulling force: 4,300 kgMax. Pulling speed: 7 m/min*Engine power: 3.7 hpEngine type: Series Wound**Reduction ratio 230:1Max. Power consumption: 365 ampsVoltage: 12 VRope (∅ x length): 8 mm x 30 mDrum (∅ x length): 63 x 120 mmOverall size (LxWxH): 437 x 160 x 250 mmWeight cable winch: 22.5 kgInstallation time: 4 hours
Features:
Motor IP67 sealed by groove with sealing ringFreewheel leverStainless steel cross bracesReinforced cable drumPowder-coated aluminium die-cast housing Motor/gearboxInternal drum brake with 3 brake shoesRemovable control unit (so that the control unit can be installed as required)Reinforced, powder-coated contactor housing made of deep-drawn sheet metal
Scope of delivery:
Installation set
Cable winch
Aluminium cable window
Fastening screws
Plastic rope with hook
Pulley with hook
Cable remote control
Radio remote control
Operating instructions
TÜV parts certificate
Attention:Please note that our cable winches may only be used for ground pulling and are not suitable for lifting!The operating instructions for the cable winch must be read completely before use and must be strictly followed, otherwise there is a risk of injury!Warranty:We grant a warranty of 3 years on the gear and drum of the cable winch in compliance with the warranty and service regulations.Note:You will find all the important information about handling your new winch in the operating instructions and from your specialist dealer.This winch may generate more noise.
Product number:
HSW9900JIMX
Steering damper kit TREKFINDER for Suzuki Jimny1 to BJ 2018
€189.00*
Steering damper kit TREKFINDER for Suzuki Jimny I type FJ until 2018
the mounting of the steering damper is done on the frame and the tie rod, by means of special heavy duty mounting kits, with conceivably easy installation
drilling, welding, deburring, painting etc. is NOT necessary for the installation of our steering damper
optimal angle of attack to the steering rod by mounting with frame kit and at rotatable track rod angle, NO mounting at the thin gusset plate of the towing lug
direct response due to the high stiffness of both mounting kits, no "bending" or "turning" as with other mounting points e.g. towing lug plate etc.
very well suitable for Jimny`s WITH and WITHOUT height or lowering
suitable for ALL Jimny I models (gasoline + diesel and 2/4WD) below in the text the models/the area of application are still separately specified (see KFZ certificate)
the Foam Cell technology in the twin-tube damper with 35 mm piston rod and maximum volume, prevents the mixing of gas molecules in the oil, guarantees a long life and a perfect performance in ON- u. OFFROAD OPERATION
track adjustment is NOT required after installation
fits in combination with ALL engine and underride guards known to us
SCOPE OF DELIVERY:
1 piece TREKFINDER steering damper/foam cell1 piece TREKFINDER mounting kit steering rod/galvanized1 piece TREKFINDER mounting kit frame/galvanized1 piece installation and assembly instructions1 piece TÜV® parts certificate
The following area of application is listed in the parts certificate:
Vehicle manufacturer: SUZUKI ( J ) Jimny / SANTANA ( E ) Jimny ConvertibleVehicle type: FJTrade name: Jimny / Jimny CabrioEC TG No.: e6*XXXX/XXX*0056*.. / e9*XXXX/XXX*0034*..
Product number:
1-SUJILD.1
Rocksliders for Suzuki Jimny FJ Side Step
From
€399.90*
Side skirts with aluminum steps or steel
The robust side skirts protect your Jimny off-road. The kicks were chamfered so that you don't get caught anywhere. The side steps are mounted on the original attachment points.
Material: aluminum / or steelColor: black powder-coatedSize: 129x41x28 cmWeight: 7.60 kg / 22 kg
Product number:
HWBSIJIM002AM
Lifting suspension TREKFINDER for SUZUKI Jimny I +55 mm
slide 2 of 4
Product number:
1-SUJIF1.1
Weight:
22 kg
Lifting suspension TREKFINDER for SUZUKI Jimny I Type FJ|the lifting is approx. 55 millimetres
SUPPLY: 1-SUJIF1.1 BILSTEIN - not hardness adjustable - very tight tuning
- 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R
- 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R
- 2 pieces TREKFINDER shock absorber front axle, B6 not adjustable, Made by BILSTEIN
- 2 pieces TREKFINDER shock absorber rear axle, B6 not adjustable, Made by BILSTEIN
- 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING
- 1 piece TREKFINDER TÜV® parts certificate
SUPPLY 1-SUJIF1.2: KONI - height adjustable - comfortable to very tight tuning possible
- 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R
- 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R
- 2 pieces TREKFINDER shock absorber front axle, heavy track 5-way adjustable, Made by KONI
- 2 pieces TREKFINDER shock absorber rear axle, Heavy Track 5-way adjustable, Made by KONI
- 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING
- 1 piece TREKFINDER TÜV® parts certificate
Info KONI:
- The suspension or dampers are delivered from the factory in the most comfortable damper setting ( open ).
- Ideal for vehicles that are driven daily on and off the road without additional weights.
- Fine damping of bumps, asphalt edges, holes, curbs etc. WITHOUT being spongy. WITHOUT being spongy!
- For applications and wishes that make a harder shock absorber sensible (e.g. roof rack, cable winch, camping equipment etc.), 5 hardness levels are available with the KONI shock absorber in order to be able to individually tighten the shock absorber! The levels are clearly noticeable when driving. In our opinion, there is a suitable set-up for every application.
OPTIONAL additionally available:
- for level compensation and can be mounted once per spring, the TREKFINDER spring spacer rings 10 mm with Art. No. 1-FDR10
- the reinforced steering damper from TREKFINDER with the Art. No. 1-SUJILD.1