7-pin E-kit with multi-plug Defender Td5/Td4
E-approved for Defender Td5 / Td4 7-pin electrical kit with multi-plug This 7-pin e-kit was specially developed for the Land Rover Defender Td5 and Td4 and enables simple, reliable connection of trailers or carriers with 12V lighting. The multi-plug connection ensures quick and clean integration into the original vehicle electrical system Suitable for all Defenders from MY99 up to and including Td4
Prices incl. VAT;
OPTIMATE 7 Battery charger TM260
The most modern 12 V 10 A & 24 V 5 A battery charger in the world! OptiMate 7 12 V-24 V is perfect for 12 V and 24 V starter and deep-cycle batteries requiring accurate temperature-controlled charging and unmonitored, safe long-term expectancy. SPECIAL FEATURES: Tailored to sensitive electronics: The RETTUNGS program is designed to provide a SAFE, fully automatic, low voltage start (starting at 0.5 volts) and IMPULS rescues of deeply discharged batteries connected to very sensitive electronics, such as light aircraft, industrial equipment, etc , Protection against Wrong Voltage Selection: When 24V has been selected and a 12V battery is connected, OptiMate 7 12-24 V immediately warns that a lower voltage has been measured and will not continue charging. The USER must confirm that the rated voltage of the connected battery is 24 V before the RESCUE mode is activated. CHARGING POWER: 10A @ 12 V / 5 A @ 24 V (Ampmatic) USE: Indoor / outdoor (lowest temperature: -40 ° F / -40 ° C). RESCUE: Starting at low voltage of 0.5 V (12 V) + 1-stage desulphation rescue. IDEAL FOR: STD, AGM & GEL 12 V batteries from 3-400 Ah / 24 V batteries from 1-200 Ah. INPUT: Global (100-240 V 50-60 Hz), high efficiency (CEC listed), fully enclosed. DESIGN: Weather resistant housing with wall mount, with 6 ft / 180 cm power cable and 6 ft / 180 cm charging cable with SAE plug. Weather resistant battery lead & standard battery terminal set included. 6 different charging programs: 12 V: 14.4 V (for normal lead acid batteries) 12 V: 14.7 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)12 V: 15 V (for Ca/Ca batteries that need 15 V charge). 24 V: 28.8 V (for normal lead acid batteries) 24 V: 29.4 V (for high performance AGM or spiral cells – OptiMa / odessey batteries)24 V: 30 V (for Ca/Ca batteries that need 15 V charge). SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery.
Prices incl. VAT;
Nakatanenga Power Distribution Centre - for Land Rover Defender Td4
Power and earth distributor for 12 consumers, for installation in the Land Rover Defender TD4, incl. pre-assembled cable set and pre-fuse. Cable length: 150 cmCable cross-section: 50 mm²
Prices incl. VAT;
OPTIMATE Lithium Battery Charger TM274
High performance diagnostic charger with test function for LiFePO4 and LFP batteries. Ideal for charging 12.8 V-13.2 V LiFePO4 and LFP high performance batteries with a capacity of 2.5 to 120 Ah. Special advantages: The TUNE mode provides a stable power supply when reprogramming vehicle systems, in car showroom displays, and when saving settings when battery cables need to be disconnected to accommodate power-driven accessory systems or when replacing batteries. BMS Reset and Button Activation - for batteries with resettable low voltage / deep discharge protection. BMS Reset Battery SAV mode: starts at 0.5 V with continuous monitoring and checking of defective or shorted cells; also the charge acceptance can be verified. Unnecessary (and unsafe) charging of a defective battery is prevented. SafeTº: automatic adjustment of the charging current to the ambient temperature determined by the charger. Reduced charging below freezing. Do not charge at temperatures below -20 ° C (to avoid damage to lithium batteries). AmpMatic: Microprocessor-controlled adjustment of the charging current to the ideal charging curve for LiFePO4, matching the battery size / condition, to achieve the fastest possible and complete charge. Technical specifications: CHARGING POWER: 9.5 A (AmpMatic) USE: Indoor / outdoor (lowest temperature: -20 ° C. SAVING MODE: Low Voltage Start at 0.5 V + 3-step Low Voltage SPAR and TEST mode SUITABLE FOR: LiFePO4 (LFP) 4 batteries with 2 to 120 Ah INPUT: global (100 to 240 V, 50 to 60 Hz), high efficiency (CEC listed), fully sealed DESIGN: weatherproof housing with wall mount, with 152 cm power cord and 180 cm charging cable with SAE connector SAFE: No risk of overcharging. Absolutely safe for the vehicle electronics. Radio suppression. Safe for long-term battery maintenance. Automatic shutdown in case of short circuit or disconnected battery. 3-year limited warranty.
Prices incl. VAT;
OPTIMATE mobile solar battery charging system, incl. traveling kit
OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current: 3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high. Made in South Africa
Prices incl. VAT;
OEM style switch panel
Switch covers OEM Style for Land Rover Defender and Discovery Extend your vehicle console with additional switches in OEM style. Please select the desired variant. Without switch
Prices incl. VAT;
OPTIMATE cable O-97C12
Adapter, MagCode clipThe OptiMate O-97C12 utilises the 12V MagCode® clip to provide a short-circuit proof, self-finding magnetic battery charger connection. Length: 75cm Connections: 12V MagCode clip to SAE Cable rating: 16AWG (1.32 mm2) SPT2-W Use: at -40 °C/-40 °F at low temperatures Design: Includes protective cap for the robust OptiMATE SAE connector. Warranty: 3 year limited replacement warranty from Optimate
Prices incl. VAT;
Helix CB C100.2-S3, loudspeaker
The speaker for true audiophiles Experience perfect sound with the HELIX COMPOSE CB C100.2-S3 – a 2-way coaxial speaker system that combines high efficiency, exceptional sound quality, and innovative technology in a compact design. Developed in response to the challenges of modern vehicle technology and HELIX's typical pursuit of intelligent solutions, the HELIX COMPOSE sets new standards in the world of car audio. Introducing the world of HELIX COMPOSE sound The HELIX COMPOSE CB C100.2-S3 offers all the essentials for an exceptional sound experience – ideal for beginners and audiophiles who demand high standards of sound quality and performance. Thanks to the harmonious coordination of all components, this speaker, in combination with HELIX and MATCH amplifiers, delivers impressive performance that is convincing even under the most demanding conditions. Maximized efficiency and performance The 3-ohm technology of the HELIX COMPOSE guarantees high efficiency and harmonizes perfectly with the amplifiers of the HELIX and MATCH series. This technology not only enables significantly higher efficiency, but also ensures powerful, clear sound and maximizes power output. For even more power, individual models are also available as optional 2-ohm versions. Powerful bass and precise treble The HELIX COMPOSE CB C100.2-S3 impresses with a low-midrange driver that combines high efficiency with excellent sound quality. With a lightweight but stable polypropylene diaphragm, the speaker delivers precise and deep bass, while the sophisticated tweeter with silk dome and neodymium magnet provides exceptional dynamics and crystal-clear treble – for an unforgettable music experience. Complete solution for discerning audio enthusiasts The HELIX COMPOSE system is not only particularly efficient and powerful, but also compact and easy to integrate – ideal for vehicles with limited space. The robust construction and high-quality materials guarantee a long service life and reliable performance. Technical details at a glance: System: 2-way coaxial speaker system Efficiency: 86 dB @ 2.83V / 1m Impedance: 3 ohms Frequency range: 100 Hz – 22,000 Hz Power handling: 60W RMS / 90W max. Tweeter: 20 mm silk dome with neodymium magnet Midrange: 100 mm polypropylene cone, torsion-resistant steel basket Crossover: Integrated, 6 dB high-passOuter diameter: 99.2 mmInstallation diameter: 89.5 mmInstallation depth: 48.9 mm Scope of delivery: 2 x HELIX COMPOSE CB C100.2-S3 speakers 1 x mounting hardware Turn your vehicle into a mobile concert hall with the HELIX COMPOSE CB C100.2-S3 – the speaker that offers everything you need for a breathtaking sound experience.
Prices incl. VAT;
Nakatanenga substructure/structure holder
Under-cabinet/on-cabinet holder simple, optionally for 12V socket, USB socket or voltmeter
Prices incl. VAT;
Adjustment adapter for electric speedometer / odometer
Adjustment adapter for electric speedometer / odometer When fitting new tyre sizes, modern vehicles with a factory-integrated speedometer usually have a speedometer discrepancy, as this is often not configurable. In the long run, the incorrect speed indication is annoying and sometimes results in an incorrect total kilometre reading (the odometer goes wrong) and consequently even in a poorer resale value of the vehicle. The speedometer adjustment with the adjustment adapter is an inexpensive solution to avoid this problem.Technical data:Power supply: 9 - 28 voltsQuiescent current consumption: 4.6 mA at 13.8 volts power supplyInput signal: min. 2 volt peak, potential-independent, max. 4.5 kHz at 12 volt input signal or max. 1.6 kHz at 5 volt input signalOutput voltage: square-wave signal equal to the operating voltage minus 1.3 volts, maximum 13.1 volts, maximum 5 kHzSecond output stage with sine wave signal
Prices incl. VAT;
BlueSea Dual USB Built-in Socket for Carling Cut-outs
BlueSea Dual USB built-in socket for Carling cut-outs USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12 V and 24 V on-board voltage and has a splash-proof cover.The socket in the form of the well-known Carlingtech Contura switches can be installed individually (please refer to the dimensioned drawing for the exact dimensions), in the Carling installation frames or in various consoles, such as: on the A-pillar in the Jeep Wrangler JK in the universal dashboard consoleSupplied without other accessories, if shown these are for illustration purposes only.
Prices incl. VAT;
Presto Electrical Protection, 400ml Spray Can
Electrical protection - Corriaion protection agent High-quality electrical protection to prevent starting problems in wet conditions. Due to its extremely good creeping ability, the spray infiltrates and displaces water and moisture. Engine parts are protected against rust formation and contamination. The unique corrosion protection agent infiltrates moisture and wetness through a physical/chemical process and forms a permanent, effective protective film. Wherever the clash of water or moisture and electronic components is a PROBLEM and another solution, such as a protective lacquer, cannot be used for technical reasons, Presto offers a unique and high-quality solution: ✓ liquid insulating agent✓ fast effect✓ avoids starting problems✓ displaces moisture✓ anti-corrosive effect We do not deliver this item to Switzerland.
Content: 0.4 liters (€27.25 / 1 liters)
Prices incl. VAT;
BlueSea Heavy Duty Battery Switch with AFD
BlueSea Heavy Duty battery changeover switch with AFD - Powerful, robust switch for demanding applications The BlueSea Heavy Duty battery changeover switch with AFD (Alternating Field Discharge) is a first-class solution for anyone looking for a reliable and powerful battery changeover switch. This switch has been developed for use in demanding environments and is ideal for applications where high load capacity and watertightness are required.Powerful load capacity:With a continuous load capacity of 500 A, the switch ensures that no overheating or damage occurs even during long-term operation. For short-term peak loads, the switch can even withstand up to 700 A for 5 minutes.Versatile switching options:The BlueSea battery transfer switch offers four different switching positions, allowing you to flexibly adapt the switch to your needs. This allows precise control and disconnection of battery connections to switch circuits on or off as required.Compatibility with large cable cross-sections:Thanks to the generous connection options, the switch is suitable for cables with a cross-section of up to 95 mm². This makes it an excellent choice for applications where thick cables are required for the power supply.Waterproof and robust:The switch complies with the IP66 standard, making it particularly resistant to dust and water.Suitable for installation and assembly:The BlueSea Heavy Duty battery changeover switch can be both flush-mounted and surface-mounted, allowing for installation flexibility. It is therefore ideal for use in vehicles, boats and other applications where the switch can be integrated into a device or mounted in a free-standing position.
Prices incl. VAT;
ARMYTEK ZIPPY EXTENDED Set Multi-Flashlight in different colors
Zippy Extended Set Multi-Flashilght Product Description:Zippy Extended Set Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. The Extended Set includes a metal clip for belts, bags or caps and a magnetic, multifunctional swivel-mount for headbands or temporary attachment to car bodies or other metal surfaces. The Zippy comes in blue, green, yellow or gray. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality. Available in 4 different colors! The lamp WITHOUT magnet and headlamp attachment can be found here. Product Specification: Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact: yesProtection from accidental switch-on: yes Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Alan ML145 magnetic antenna
Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
Optimal battery monitor SAE on M8 eyelets
Monitoring the charge of your stored 12V motorsport lead acid battery 2 automatic operating modes: Battery charge level - corresponding LED flashes every 3 seconds (long-term current draw below 0.2 mA). Charging system test - when the charging voltage is 13.5 V or until the ideal range of 14 V + is reached, the LED arrow mode is activated with 4 LEDs the voltage range from "full to empty" of all 12 V batteries is covered (including AGM with higher voltage for motorsport) SAE charging port with weatherproof cap for use while driving charging system status is displayed with the engine running length 100 cm, 15 A fuse, 5/16 "/ M8 eyelets
Prices incl. VAT;
CB-Radio VOX Microphone
The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
Mounting bracket for 12V and USB sockets
Mounting bracket for 12V and USB socket outlets Mounting bracket for 12V and USB socket outletsThe mounting bracket was specially developed for the simple and safe installation of the waterproof 12V socket outlet NABS1011 and the double USB socket outlet NABS1016. It enables flexible installation of the sockets, depending on individual requirements and circumstances.Thanks to its sophisticated design, the bracket ensures stable and wobble-free mounting of the sockets. It is ideal for use in vehicles or other outdoor applications where a reliable power supply is required.The holder is made of robust material for a long service life - even under demanding conditions. The supplied mounting material enables quick and easy installation.Scope of delivery: 1x mounting bracket Mounting material Use this bracket to safely and professionally integrate your 12V and USB sockets and supply your devices with power at all times.
Prices incl. VAT;
BlueSea fuse holder with cover, for 4 flat fuses
BlueSea fuse holder with cover, for 4 flat fuses The fuse holder with cover accommodates 4 fuses in a compact space and serves as a power distributor for setting up up to 4 circuits. Commercially available ATC flat fuses can be used.It is suitable for 12 V and 24 V vehicle electric systems and may be loaded with up to 30 A per circuit and 100 A in total at the same time.Delivery without further accessories, if shown, these are for illustration purposes only.
Prices incl. VAT;
Albrecht Racer 90 mobile antenna, 115 cm
This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
Carling Indicator light
Carling Warning Light – Double signal power for your cockpit! Do you need a clear and unmistakable visual indicator for important statuses in your vehicle? Our Carling Warning Light with two integrated LEDs offers you just that: a high-quality and conspicuous signal solution, perfectly integrable into Carling Contura mounting frames. Why this warning light? Sometimes, two statuses need to be signaled simultaneously or alternatively, or you might want a particularly prominent warning. This light with its two LEDs is ideal for this and ensures a professional look. Your advantages at a glance: Two LEDs in one light: Equipped with two red 12V LEDs for flexible or enhanced signaling. For example, you can use them for different warning levels or two separate but thematically related signals. Clear Visibility: Bright LEDs ensure that you don't miss any important signals, even in unfavourable lighting conditions. Versatile Use: Ideal as a warning signal for e.g., overheating, low oil pressure, engaged differential locks, the status of your winch, or other critical system statuses of your vehicle. System Compatible: Fits perfectly into Carling Contura mounting frames for seamless and professional integration into your dashboard or switch console. Standard Dimensions: With the typical Carling dimensions of 21 x 37 mm. Easy Connection: Connection is made via standard flat blade connectors (6.3mm). A connection diagram is shown on the product page, illustrating how the two LEDs (top and bottom) can be controlled separately. Professional Look: The red lens ensures a uniform appearance, even if only one LED is lit. Double the safety for your cockpit! Whether you want to compactly combine different warning signals or want to double-secure a particularly important signal – this Carling Warning Light with two LEDs is an elegant and functional solution for your vehicle. It allows you precise and clearly visible monitoring of important vehicle functions. Ensure clarity and expand your control indicators with this practical dual warning light!
Prices incl. VAT;
Nakatanenga superstructure housing
Nakatanenga surface-mounted housing Surface-mounted housing, optionally for 12V socket, USB socket or voltmeter, optionally for one, two or three units.Installation panels and devices are for illustration purposes only and are not included in the scope of delivery.
Prices incl. VAT;
BlueSea fuse holder for 6 independent circuits
High-quality fuse holder for 6 independent circuits This robust fuse holder offers space for up to six separate circuits and ensures reliable protection for your electrical system. Each circuit can be loaded with up to 30 amps, which enables flexible use in a wide range of applications - whether in the automotive sector, boats, motorhomes or other 12V or 24V vehicle electrical systems.Thanks to its design for a maximum operating voltage of 32 volts, the fuse holder is ideal for DC networks in the low-voltage range.The transparent cover supplied protects the fuses from external influences and also enables a quick visual check. Practical: The cover has integrated labelling fields for easy identification of the individual circuits as well as a holder for a spare fuse - so a reserve is always to hand in an emergency.
Prices incl. VAT;
OptiMATE DC to DC charger TM500
CHARGE YOUR 12 V - 13.2 V BATTERY WITH ANOTHER 12 V BATTERY! NO ALTERNATING CURRENT REQUIRED Charge the battery of your motorbike, ATV or race boat on the trailer on the way to the event. OptiMATE DC to DC draws power from your vehicle's battery or from an external 12V battery to save, charge and maintain another 12V-13.2V battery. OptiMATE DC to DC's highly efficient long-term maintenance mode protects the source battery and only draws power when the battery to be charged needs it. The OptiMATE maintenance mode keeps the battery fully charged, never overcharges it, extends its life and improves battery performance. OptiMATE DC to DC can save a deeply discharged, sulphated battery at 2 volts. CHARGING CURRENT: 2 A APPLICATION: Indoor/outdoor (lowest temperature: -4°F/-20°C). SAVE: Start with low voltage of 1 V IDEAL FOR: STD, AGM & GEL 12V batteries and LFP (LiFEPO4) from 3 - 96 Ah. INPUT: 12-16 V, 2.7 A max DESIGN: Weatherproof housing with wall bracket, with 6 ft/180 cm mains cable and 6 ft/180 cm charging cable with SAE plug. Weatherproof battery lead, standard battery terminal kit and battery terminal kit with fuse included. SAFE: No risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic switch-off in the event of a short circuit or disconnected battery. 3-year limited warranty (this warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty).
Prices incl. VAT;
Carling Contura switch for cable winch, with mechanical protection
Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.
Prices incl. VAT;
Cable bushing 5x20A
Cable bushing 5x20A Cable bushing, 5 contacts (20 A each), waterproof to IP65, up to 400 V, socket and plug with screw-type fuse, in angular housing for horizontal mounting, incl. cover caps for plug and socket, connection cross-section: 5x2.5 mm² (screwed) Dimensions:Vehicle side opening: 52x42 mmScrew spacing of the angular housing: 60x60 mmAngle housing: 74x70x52 mm
Prices incl. VAT;
VOTRONIC StandBy Charger Pro
Battery recharging & charge retention Perhaps this situation sounds familiar to you: You are standing on the beach in your camper and leave the car radio on for a long time or open the door frequently. Suddenly, the vehicle battery management system reports that the (starter) battery is running low and the radio switches off or the battery needs to be charged. This is often caused by high power consumption by the vehicle radio or vehicle control systems, which are active for a while every time the door is opened and consume a relatively large amount of power from the starter battery. While all VOTRONIC mains chargers, solar charge controllers and combination chargers have a power-reduced auxiliary charging output in addition to the powerful main charging output, which supplies the starter battery with a defined trickle charge, many conventional devices unfortunately do not have this at all.This can be remedied by a so-called stand-by charger. Charging technology at the highest level The battery is the central element of a vehicle's electrical system. It requires the greatest attention, maintenance and care and, above all, it must be charged correctly. Modern lithium (LiFePO4) batteries have a significantly higher open-circuit voltage than starter batteries (lead, AGM). When using simple, unregulated and uncontrolled standby chargers, this leads to the complete discharge of the lithium supply battery. For this reason, the Standby Charger (item no. 3065 or 6065) is unfortunately not suitable for these batteries. The VOTRONIC StandBy Charger Pro, on the other hand, has an adjustable undervoltage limit at the input. Charging is interrupted if the voltage falls below this limit. This means that it can be operated on a modern lithium (LiFePO4) battery as a supply battery without any problems and without running the risk of draining it completely. Charging converter for recharging and charge retention of the starter battery IU charging characteristic Adjustable end-of-charge voltage of 12.5 - 14.5 V Upward and downward conversion from input to output voltage possible Also works if the voltage of the battery to be supplied is lower than that of the battery to be charged Input-side adjustable switch-off threshold of 12 - 14 V prevents deep discharge of the battery connected on the input side Suitable for lead, gel, AGM and lithium (LiFePO4) batteries on both the input and output sides High output current of max. 8 A Passive cooling without fan Two independent 12V control inputs: "EN" (enable), to activate "DIS" (disable) to deactivate Standby charger can thus be switched on externally via switch and switched off, for example, by D+ while driving 2 LEDs provide information about the operating status Safe to operate due to built-in overheating protection Dimensions (WxLxH): 105mm x 71mm x 25mm Weight: 92g
Prices incl. VAT;
Replacement circuit board for daytime running lights, New Defender – Headlight repair L663
Replacement circuit board for repairing daytime running lights – suitable for Land Rover New Defender headlights Get your daytime running lights working again: this high-quality replacement circuit board has been specially developed for repairing daytime running lights in the headlights of the Land Rover New Defender. Whether individual LED segments have failed or the lights have gone out completely, this circuit board enables reliable and cost-effective repair without having to replace the entire headlight. Please note: The headlight must be removed and opened for repair. This should only be carried out by qualified personnel. The headlight may no longer be watertight after this repair > condensation/droplets may form.
Prices incl. VAT;
Heavy Duty Busbar 1300A
Busbar for 12/24 V systems, loadable up to 1,300 A optionally for positive or negative pole Voltage: 12-24 VDCConnections: Thread 8 x M8Dimensions: 175 mm x 100 mm x 80 mmNet weight: 1.8 kgHigh-quality Teflon insulatorCE certifiedPlease select the desired version below.
Prices incl. VAT;
VOX microphone 4-pole plug Version 2.0
The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
Tallon RAM Mount Adapter
Tallon RAM Mount Adapter For mounting RAM Mount accessories to a Tallon base, with 25.4 mm / 1" (Size B) stainless steel mounting ball. The Tallon base adapter allows mounting of the extensive RAM Mount product range - e.g. mounts for Apple iPad, Apple iPhone, navigation devices, phones, etc. When using the Tallon Elite USB base, these can also be supplied with power and communicate with other devices via USB. Scope of delivery: adapter Delivery does not include other accessories. Mounting arms and device holder from RAM Mount must be purchased separately.
Prices incl. VAT;
Cable entry with stainless steel cover
Waterproof cable gland with stainless steel cover This high-quality, waterproof cable gland enables cables to be inserted safely into housings, boats, vehicles or other applications - without having to remove the plug from the cable. This saves time and reduces the risk of damage during installation.Thanks to the clever design and the flexible sealing membrane, the grommet is suitable for a wide range of cable and connector sizes. The integrated stainless steel cover not only ensures a clean, professional appearance, but also protects the grommet from mechanical and weather influences.Ideal for use in outdoor applications, vehicle construction or wherever cables need to be inserted safely and permanently sealed.Please select the desired size.
Prices incl. VAT;