Ähnliche Artikel
NATO socket / plug NATO plugs and sockets with the test mark VG 96917 are suitable for a safe power supply and for jump-starting military vehicles, fire engines and rescue vehicles, but also excellent for off-road use. This plug system can be used in the 12 VDC or 24 VDC on-board network. The maximum current carrying capacity is 300A continuous load (peak currents significantly higher). Another practical application is the external feed-in of direct current. Here, a DC supply is possible without opening battery covers or flaps. The NATO plugs / sockets are protected against polarity reversal. Delivery includes contacts.NATO socket, 2-pole12/24 V, suitable for 50 mm²NATO stock no. 5935-12-308-5019, VG 96917 NATO plug, 2-pole12/24 V, suitable for 50 mm²VG 96917 Please also note our bundle with price advantage!
Prices incl. VAT;
Power distribution box with fuse holder from BlueSea Compact size BlueSea blade fuse block and power distribution for either six or up to twelve seperately fused circuits for up to 30 Amps per electronic installation and currencies up to 32 volts. Fitting a variety of cars with 6 V up to 24 V supply systems. These fuse boxes also provide a common negative bus to minimize bad earth problems. New version offers two separate circuits, thus allowing e.g. 6 installation with permanent life feed and 6 with ignition life feed. This fuse box can be the starting point for well laid-out and safe vehicle electrics and should be fitted from early on when starting fitting additional appliances and electical installations. The box itself should be fused - not more than 30 cm away from the battery with a maximum of 125 A - for which we recommend our fuse carrier (up to 200 A) from the same supplier with the suitable 125 A MIDI strip fuse. Comes with: fuse box for either 6 or 12 circuits clear plastic cover with recessed placeholder for lables two slots for spare blade fuses no fuses supplied Technical details: Modell SHMA-6 SHMA-12 SHMA-6+6 number of circuits max. 6 max. 12 max. 6+6 placeholder for spare fuses 2 2 2 dimensions 125x85x39 mm 165x85x39 mm 165x85x39 mm weight 250 Gramm 350 Gramm 350 Gramm max. per circuit max. 30 A max. 30 A max. 30 A max. overall max. 100 A max. 100 A max. 100 A max. voltage max. 32 V max. 32 V max. 32 V Please choose number of circuits.
Prices incl. VAT;
Dual USB Built-in Socket with Cover Hight-quality flush-mounting socket with splash-proof lid, providing 2 USB 2.0 sockets to power mobile devices @ 5 V/2.1 A. Technical details: input voltage: 12 V output volrage: 5 V +-5% max. output current: 2.1 A internal overheat control made form non-corroding material lid protacts against water and dust not suitable for data connections Very well suited to power mordern devices like e.g. Apple iPhone, iPad, smartphones, tablet PC, Garmin GPS, TomTom navigation device, Blackberry, etc. Can either be fitted with or without rectangular base plate. Without, it fits the standard cigarett lighter socket, e.g. on Land Rover Defenders
Prices incl. VAT;
Waterproof 12V socket outlet 12 V socket with rectangualar mounting plate and waterproof cover. Up to 15 A current, locks with the suitable plug NABS1010. 12 V socket, waterproof, 15 A Product features: waterproof cover to prevent water ingress included strain relief for severe humidity and vibratios can be mounted with or without supplied mounting plate large contact area for best power transmission "Twist-Lock" system for secure locking with NABS1010 plug cable-side seal (4 mm diameter) max. voltage: 15 V max. current: 15 A included in delivery: 1 socket
Prices incl. VAT;
MagCode PowerSystem and PowerSystem Pro plugs
€15.00
Prices incl. VAT; / Parcel shipping
↪️ connector system 12/24 V, magnetic (up to 15 A) or additional mechanical (up to 25 A) ✔️ locking, water- and dust-proof ✔️ best quality ✔️ fast shipping
Magnetic plug system for 12V
consisting of PowerPort connection and PowerClip plug - waterproof and dustproof - therefore ideal for off-roaders!
Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnetic plate in the transmitter is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode PowerSystem is 100% short-circuit-proof. A hinged PowerPort cover is available as an option.
Here you can also find our advantage bundle, consisting of clip, port and cover.
Here you can also find the MagCode cover for your Power System or Power System Pro separately.
The MagCode system can be used for a wide range of applications where safe but easily detachable power connections are required - whether it's the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way.
Technical data:
Locking: magnetic
PowerPower connection: 6.3 mm flat contact for plugging or soldering
PowerClip connection: Screw connection, max. 2.5 mm² cable
Mounting diameter PowerPort: 28 mm (M28)
PowerClip projection: 21.5 mm
Voltage range: 12 Volt or 24 Volt
Load capacity: max. 15 amps (at +70°C)
Port cable length: 72 mm
Dust and waterproof :
PowerPort front (built-in): IP5K9K
PowerPort connection side: IP5K0
PowerClip (not connected): IP40
PowerClip (on port): IP42
Switching cycles (without load): over 10,000
Switching cycles (under load): 4,000
Please note the instructions for outdoor use
The PowerSystem Pro, on the other hand, has a bayonet lock in addition to the magnetic lock, as well as a load capacity of 25 A instead of 15 A. Both systems are available for 12 V and 24 V. A connection cable for the MagCode PowerClip is not included in the order.
Please select the desired variant.