Compact size BlueSea blade fuse block and power distribution for either six or up to twelve seperately fused circuits for up to 30 Amps per electronic installation and currencies up to 32 volts. Fitting a variety of cars with 6 V up to 24 V supply systems. These fuse boxes also provide a common negative bus to minimize bad earth problems. New version offers two separate circuits, thus allowing e.g. 6 installation with permanent life feed and 6 with ignition life feed. This fuse box can be the starting point for well laid-out and safe vehicle electrics and should be fitted from early on when starting fitting additional appliances and electical installations. The box itself should be fused - not more than 30 cm away from the battery with a maximum of 125 A - for which we recommend our fuse carrier (up to 200 A) from the same supplier with the suitable 125 A MIDI strip fuse. Comes with: fuse box for either 6 or 12 circuits clear plastic cover with recessed placeholder for lables two slots for spare blade fuses no fuses supplied Technical details: Modell SHMA-6 SHMA-12 SHMA-6+6 number of circuits max. 6 max. 12 max. 6+6 placeholder for spare fuses 2 2 2 dimensions 125x85x39 mm 165x85x39 mm 165x85x39 mm weight 250 Gramm 350 Gramm 350 Gramm max. per circuit max. 30 A max. 30 A max. 30 A max. overall max. 100 A max. 100 A max. 100 A max. voltage max. 32 V max. 32 V max. 32 V Please choose number of circuits.

Dual USB Built-in Socket with Cover Hight-quality flush-mounting socket with splash-proof lid, providing 2 USB 2.0 sockets to power mobile devices @ 5 V/2.1 A. Technical details: input voltage: 12 V output volrage: 5 V +-5% max. output current: 2.1 A internal overheat control made form non-corroding material lid protacts against water and dust not suitable for data connections Very well suited to power mordern devices like e.g. Apple iPhone, iPad, smartphones, tablet PC, Garmin GPS, TomTom navigation device, Blackberry, etc. Can either be fitted with or without rectangular base plate. Without, it fits the standard cigarett lighter socket, e.g. on Land Rover Defenders

Protective cover for MagCode PowerPort, suitable for Power System and PowerSystem Pro, 12 and 24 V. Protects the PowerPort socket when not in use, very easy to fit.

Magnetic plug system for 12 V, consisting of PowerPort connection and PowerClip plug - water- and dust-proof - therefore ideal for off-roaders! Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnetic plate in the transmitter is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode PowerSystem is 100% short-circuit-proof. A hinged PowerPort cover is available as an option.  Here you can also find our advantage bundle, consisting of clip, port and cover. Here you can also find the MagCode cover for your Power System or Power System Pro separately. The MagCode system can be used for a wide range of applications where safe but easily detachable power connections are required - whether it's the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way. Technical data: Locking: magneticPowerPower connection: 6.3 mm flat contact for plugging or solderingPowerClip connection: Screw connection, max. 2.5 mm² cableMounting diameter PowerPort: 28 mm (M28)PowerClip projection: 21.5 mmVoltage range: 12 Volt or 24 VoltLoad capacity: max. 15 amps (at +70°C)Port cable length: 72 mm Dust and waterproof : PowerPort front (built-in): IP5K9KPowerPort connection side: IP5K0PowerClip (not connected): IP40PowerClip (on port): IP42Switching cycles (without load): over 10,000Switching cycles (under load): 4,000Please note the instructions for outdoor use The PowerSystem Pro, on the other hand, has a bayonet lock in addition to the magnetic lock, as well as a load capacity of 25 A instead of 15 A. Both systems are available for 12 V and 24 V. A connection cable for the MagCode PowerClip is not included in the order. Please select the desired variant.