BlueSea fuse holder with cover, for 8 flat fuses
BlueSea fuse holder with cover, for 8 flat fuses The fuse holder with cover accommodates 8 fuses in a compact space and serves as a power distributor for setting up up to 8 circuits. Commercially available ATC flat fuses can be used.It is suitable for 12 V and 2 4 V vehicle electric systems and may be loaded with up to 30 A per circuit and 100 A in total at the same time.Delivery without further accessories, if shown, these are for illustration purposes only.
Prices incl. VAT;
Alan ML145 magnetic antenna
Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
TYREinflate 2000 OTIR2000, Compact rechargeable tire pump
Compact rechargeable tyre pump The OSRAM TYREinflate 2000 is a rechargeable tyre pump with a digital backlit display for easy and accurate pressure measurement and inflation of tyres, showing pressure values in BAR, kPA and PSI. The OSRAM TYREinflate 2000 has an internal memory and, thanks to the memory function, up to four different values can be programmed and stored for different tyres. It is also equipped with an auto-stop function: the OSRAM TYREinflate 2000 stops automatically when the preset pressure is reached. Thanks to the USB cable supplied, the OSRAM TYREinflate 2000 is rechargeable and no 12V socket is required for the power supply, so it is not only used for inflating car tyres, but can also be used for inflating bicycle, scooter and motorbike tyres. Thanks to its lightweight and compact design, the OSRAM TYREinflate 2000 is ideal for travelling and can be taken almost anywhere. Simply stow it in the glove compartment of your car, a bag or a rucksack using the storage bag supplied. A bracket for mounting and storage on a bike is also included. Thanks to the power bank function, the OSRAM TYREinflate 2000 can also be used as a charger for electronic devices such as your mobile phone. In addition, the integrated torch function can provide illumination at night or in poor lighting conditions. The scope of delivery also includes a 2-piece adapter set that can be used as a connection for bicycles, balls and other inflatable objects with Presta valves. OSRAM grants a 2-year guarantee* on this product Product information Charging time: approx. 3 hours Inflation time: <2min 0-5.5bar bicycle tyre Tube length: 14.5cm Units of measurement: PSI, kPa, bar Maximum pressure: 120 PSI, 8.3 bar Accuracy (bar): 0-1.5 PSI / 0.10bar Mains cable length: N/A Display size: 30x155mm Flow rate (1/min): N/A Electrical data Power supply: USB Cable Nominal voltage 3.7 V Nominal power 67.00 W Rechargeable battery (5200 mAh) Dimensions & Weight Length 70.0 mm Height 170 mm Width 70.0 mm Product weight: 500g Additional product data Display type Digital Noise level (dB) 83 dB Fuse 18 A Recommended area of application Bicycles, motorbikes, cars Accessories:Adapter for bicycles & small inflatable sports equipment. USB charging cable, power bank system, LED light, storage bag, bike holder Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Mounting plate air inlet for CB antenna fixed mounting, for right-hand drive (RHD)
Plate for mounting a CB radio antenna on the air intake (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary. Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material
Prices incl. VAT;
Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)
Defender CB antenna mount – air intake mount, magnetic or fixed This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material
Prices incl. VAT;
Intelligent charge / monitoring controller
OptiMate Solar DUO charges and maintains ChargeSaves dead batteries from 4 V with its unique pulse charge.The fastest charge is delivered as the "intelligent charge control" selects between pulse and continuous charging depending on sunlight strength. Intelligent maintenance continues the next day if the battery has maintained the charge overnight, otherwise the program returns to the OPTIMIZE step. MONITORINGBattery status is displayed every 3 seconds. Ready indicator for STD, Hi-Performance AGM and Lithium LEP batteries. Draws less than 0.5mA during monitor mode.Automatically switches to CHARGE when solar power is sufficient. MOUNTINGThe OptiMate DUO charge and monitor controller is separate from the solar module and can be mounted near the vehicle or battery for easy tracking of charge and maintenance progress. The solar panel must be mounted and angled to receive direct sunlight. The range / distance between the battery and the panel is 315 cm / 124″. To extend, use OptiMate cable extensions O-03, O-13 or O-23 and insert them between the solar panel and the OptiMate DUO charging monitor. Application noteFor further application information please refer to the product data sheet
Prices incl. VAT;
OPTIMATE cable O-97P12
MagCode connector, panel mount The OptiMate O-97P12 utilises the 12V MagCode® connector to provide a short-circuit proof, self-finding magnetic battery charging connection. Length: 100cm Connections: 12V MagCode connector to 5/16″ (M8) / 3/8’ (M10) rings Cable rating: 16AWG (1.32 mm2) SPT2-W Fuse: 15A Use: at -40 °C/-40 °F at low temperatures Stem: Panel mount with sealing cap. Warranty: 3 year limited replacement warranty from Optimate
Prices incl. VAT;
BlueSea Dual USB Built-in Socket for Carling Cut-outs
BlueSea Dual USB built-in socket for Carling cut-outs USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12 V and 24 V on-board voltage and has a splash-proof cover.The socket in the form of the well-known Carlingtech Contura switches can be installed individually (please refer to the dimensioned drawing for the exact dimensions), in the Carling installation frames or in various consoles, such as: on the A-pillar in the Jeep Wrangler JK in the universal dashboard consoleSupplied without other accessories, if shown these are for illustration purposes only.
Prices incl. VAT;
BlueSea fuse holder for 6 independent circuits
High-quality fuse holder for 6 independent circuits This robust fuse holder offers space for up to six separate circuits and ensures reliable protection for your electrical system. Each circuit can be loaded with up to 30 amps, which enables flexible use in a wide range of applications - whether in the automotive sector, boats, motorhomes or other 12V or 24V vehicle electrical systems.Thanks to its design for a maximum operating voltage of 32 volts, the fuse holder is ideal for DC networks in the low-voltage range.The transparent cover supplied protects the fuses from external influences and also enables a quick visual check. Practical: The cover has integrated labelling fields for easy identification of the individual circuits as well as a holder for a spare fuse - so a reserve is always to hand in an emergency.
Prices incl. VAT;
BlueSea voltage indicator with OLED display
BlueSea voltage indicator with OLED display The compact and practical voltage indicator for 12 V and 24 V systems is equipped with a high-quality OLED display, has reverse polarity protection and is waterproof and dustproof according to IP66 standard.
Prices incl. VAT;
Mag PowerSystem Pro 12V Bundle
Complete package consisting of a PowerPort Pro (socket), a PowerClip Pro (plug) and a PowerPort cover, for 12 V. Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnet plate in the encoder is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode Pro PowerSystem is 100% short-circuit-proof. The MagCode Pro system can be used for a variety of applications where safe but easily detachable power connections are required - whether it is the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way. Technical data: Locking: magnetic and mechanicalPowerPort connection: 6.3 mm flat contact for plugging or solderingPowerClip connection: Screw connection, max. 2.5 mm² cablePowerPort installation diameter: 28 mm (M28)PowerClip projection: 21.5 mmVoltage range: 12 Volt (also available for 24V)Load capacity: max. 25 amps (at +70°C)Port cable length: 72 mm Dust and waterproof : PowerPort front (built-in): IP5K9KPowerPort connection side: IP5K0PowerClip (not connected): IP40PowerClip (on port): IP42Switching cycles (without load): over 10,000Switching cycles (under load): 4,000Please note the instructions for outdoor use
Prices incl. VAT;
ARMYTEK PRIME C1 magnetic flashlight
Prime C1 Magnet USB XP-L White Flashlight Armytek are famous for creative outdoor and survival flashlights like the angle-head lamps Tiara or Wizard. More traditional flashlights with light beams out of the front are also better when developed and produced by the Canadians. The Prime C1 Magnet USB is such a high-quality flashlight, combining traditional design and extreme performance. A total of 11 light modes, 970 OTF Lumen and 165 m beam distance in the most powerful turbo setting, various strobe modes for signaling and a virtually endless low light setting with 60 days until the battery is drained, those are not the only top arguments in favor of the Prime C1. With a length of only 92 mm, the flashlight is compact enough to fit any pocket and so robust that it can be run over by a car. The Prime is certified to function in water depths of up to 10 m for at least 2 hrs. In other words, you will never ever have to worry about your flashlight not being protected from rainwater, dirt and dust. As is customary with Armytek lamps, the Prime is activated and operated by a single button. The button has a firm pressure point and is recessed into the housing to prevent accidental activation and draining of the battery. Apropos draining: once the Prime is switched off, the flashlight boasts an ultra-low current drain technology. It would take the battery 25 years or more to go completely flat. Sounds too good to be true? Armytek are so confident in their product that they provide a no-hassle 10-year warranty. The Prime C1 comes with a case, metal clip, two rubber seals, magnetic charging cable and a rechargeable 18650 Li-Ion battery. Specification: Light & OpticsColor temperature: WhiteLED light output: 1,050 lmOTF light output: 970 lmBeam distance: 165 mLED: XP-LStabilization of brightness : FULL (constant brightness)Hotspot: 20°Spill: 80° Dimensions & WeightHead diameter: 24.5 mmLength: 92 mmBody diameter: 24.5 mmWeight : 60 g Body & DurabilityWaterproof & Submersible: 10 mOperation temperature : -25..+40 °CImpact Resistance: 10 m Modes & ElectronicsPower source: 1x18350 Li-IonNumber of modes: 6Runtime for maximal mode: 30 minRuntime for minimal mode: 60 daysAbility to use batteries with a flat contact: yesProtection from accidental switch-on:yes Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Albrecht Racer 90 mobile antenna, 115 cm
This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.
Prices incl. VAT;
Switch for indicator high beam horn - for Land Rover Defender
Switch for indicators, high beam and horn for Land Rover Defender suitable for Land Rover Defende from VIN ...WA138480 (Defender TD5 from MY1998) to FIN ...EA999999 (Defender TD4 up to MY2014)
Prices incl. VAT;
BlueSea Dual USB Built-in Socket 4.8A (round)
BlueSea Dual USB built-in socket 4.8A (round) USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12V and 24V on-board voltage and has a splash-proof cover.Delivery without further accessories, if shown, these are for illustration purposes only.
Prices incl. VAT;
Fuse Holder up to 200A for MIDI/AMI Strip Fuses
Fuse Holder up to 200A for MIDI/AMI Strip Fuses High-quality fuse holder for up to 200 A MIDI or AMI strip fuses, water and dust proof according to IP66 norm, comes without fuse. Features: fixes with M8 bolt bolted fuse (M5) for secure connection even in severe off-road conditionks transparent cover, water and dust proof to IP66 space for labelling holder for spare fuse adjustable wire feed for tidy wiring
Prices incl. VAT;
Outdoor plug 2-pole
2-pole plug connection to DIN 14690 - Robust, reliable, versatile This high-quality 2-pole plug connection in a robust aluminum housing is specially designed for demanding applications in the low-voltage range (6-42 V). With a load capacity of up to 16 amps and the standardized design in accordance with DIN 14690, it offers a secure and durable connection - even under harsh operating conditions. This plug connection is the first choice for anyone looking for a durable, standard-compliant solution for mobile power supplies and device connections. 2-pin plug connectionin a robust aluminum housingSuitable for outdoor applications6-42 V, max. 16 AComplies with DIN 14690
Prices incl. VAT;
OPTIMATE cable O-97C12
Adapter, MagCode clipThe OptiMate O-97C12 utilises the 12V MagCode® clip to provide a short-circuit proof, self-finding magnetic battery charger connection. Length: 75cm Connections: 12V MagCode clip to SAE Cable rating: 16AWG (1.32 mm2) SPT2-W Use: at -40 °C/-40 °F at low temperatures Design: Includes protective cap for the robust OptiMATE SAE connector. Warranty: 3 year limited replacement warranty from Optimate
Prices incl. VAT;
DV antenna cable 5m RG58 with PL foot incl. Weather protection cap and FME PL adapter - solderless
Brief description: DV antenna cable 5m RG58 with PL foot incl. Weather protection cap and FME PL adapter - solderless This article is perfect as a roof duct for an antenna cable to operate a CB radio system. The supplied cover cap protects the PL foot from the weather when an antenna is not in use. The detachable PL adapter makes it easy to lay the cable inside the vehicle or to carry it out in tight spaces. There is no longer any need for soldering work because this article is provided with a PL screw connection on both sides. This article is ideal if, for example, you want to use our Cargobear antenna holder on our Cargobear in the rear area and are looking for a clean solution for the cable duct in the interior right up to your CB radio.
Prices incl. VAT;
Outdoor socket outlet 2-pole
Compact, robust, versatile 2-pin socket outlet 6-42 V, 16 A This 2-pin socket outlet is ideal for use in low-voltage systems from 6 to 42 volts - whether in vehicle construction, agricultural machinery, trailers or workshop applications. With a load capacity of up to 16 amps, it is reliable and versatile. Whether as a spare part or for individual conversions: This socket offers a safe, long-lasting connection for many applications in vehicles and beyond. 2-pin plug connectionIn a robust aluminum housingSuitable for outdoor applications6-42 V, max. 16 AComplies with DIN 14690
Prices incl. VAT;
Power distributor with fuse holder and earth connection for 6 or 12 circuits
Power distributor with fuse holder and earth connection for 6 or 12 circuits Compact fuse, connection and distribution box for up to six or twelve separately fused circuits with a load capacity of up to 30 amps per consumer and voltages of up to 32 volts. This makes the holder suitable for a wide range of vehicles, from classic cars with 6 V electrical systems to trucks with 24 V electrical systems.The fuse box also serves as a distribution or collection system for the earth connection. Difficult-to-locate electrical and electronic problems due to a bad earth wire of the bodywork are thus significantly minimised - especially for Land Rover Defender models from model year 2007 onwards (Td4 engine) this is a good investment! A ground cable is then fed back to the battery from the ground collection point.The distributor is the cornerstone of a neatly constructed and fused electrical system in the vehicle and should be fitted right at the start of Defender ownership if possible. The distributor itself must also be fused - no more than 30 cm from the battery, with max. 125 A - for this we recommend the fuse holder up to 200 A as well as the matching 125 A MIDI strip fuses.Another feature is an LED indicator for each circuit, which indicates a defective fuse when it lights up. The scope of delivery also includes stickers for various consumers to make it easier to assign the respective connections. Scope of delivery:- Fuse holder for optionally up to 6 or 12 circuits.- Clear plastic cover with inset labelling fields- Delivery without fuses
Prices incl. VAT;
BlueSea ANL fuse, 750A, max. 32V
BlueSea ANL fuse, 750A, max. 32V Specification: Silver plated plug blades for corrosion resistance. Visible indication of blown condition 6,000 ampere interrupting capacity (AIC) meets ABYC requirements for DC main circuit protection on large battery banks For use with ANL fuse block holders 5/16" (M8) mounting holes 22mm x 81mm (7/8" x 3 3/16") Depth varies depending on power rating Suitable for DC systems between 6V and 80V Suitable for AC systems up to 32 V Blue Sea part number 5163, 8-25163 Cooper Bussman ANL-750 Eaton ANL-750 Battery Booster Starter Pack Main Fuse UL recognised, CSA certified, 35-750 A @ 80 Vdc, IR 2700 A, Guide JFHR2, file E56412, Class 1422-30, File 53787,
Prices incl. VAT;
Cable entry with stainless steel cover
Waterproof cable gland with stainless steel cover This high-quality, waterproof cable gland enables cables to be inserted safely into housings, boats, vehicles or other applications - without having to remove the plug from the cable. This saves time and reduces the risk of damage during installation.Thanks to the clever design and the flexible sealing membrane, the grommet is suitable for a wide range of cable and connector sizes. The integrated stainless steel cover not only ensures a clean, professional appearance, but also protects the grommet from mechanical and weather influences.Ideal for use in outdoor applications, vehicle construction or wherever cables need to be inserted safely and permanently sealed.Please select the desired size.
Prices incl. VAT;
BlueSea fuse holder with cover, for 4 flat fuses
BlueSea fuse holder with cover, for 4 flat fuses The fuse holder with cover accommodates 4 fuses in a compact space and serves as a power distributor for setting up up to 4 circuits. Commercially available ATC flat fuses can be used.It is suitable for 12 V and 24 V vehicle electric systems and may be loaded with up to 30 A per circuit and 100 A in total at the same time.Delivery without further accessories, if shown, these are for illustration purposes only.
Prices incl. VAT;
Dual busbar for power and earth
DualBus busbar - Compact power distribution The DualBus busbar combines negative and positive power lines on just one block to save space. The clear polycarbonate cover for clipping in, which is included in the scope of delivery, complies with the strict specifications of the US Coast Guard with regard to insulation and shielding properties. Two M8 screw terminals each on the current and earth side are designed for a load of 150 A DC (direct current, up to max. 48 V) and 130 A AC (alternating current, up to max. 300 V). 5 consumer connections (M5) can be assigned to each side. Technical data:Dimensions: 125x65x39 mmWeight: 350 gram
Prices incl. VAT;
Wiper relay for Land Rover Defender
Windscreen wiper relay - Land Rover Defender Replacement relay for the windscreen wiper of the Land Rover Defender. Suitable for various model years, ensures reliable control of the wiper intervals. Simple replacement, close to OEM design.
Prices incl. VAT;
Switch housing and cover for hazard warning lights and power windows, Land Rover Defender Tdci/TD5
Switch Mounts for Hazard Lights & Window Controls – Land Rover Defender Give your dashboard a clean, factory-style appearance with our high-quality switch mounts!Hazard Light Switch MountPerfect for TD4/TD5 Defenders upgrading to a double-DIN dashboard, this mount allows for a seamless relocation of the hazard switch. In base-model Defenders with fewer switches, only the hazard switch often needs repositioning—this mount ensures a neat and functional installation.Power Window Switch MountThis bracket allows you to relocate factory power window switches to a new position on the dashboard. Ideal for retrofits – enables installation of factory switches in older Defender models Flush-fit design – recessed mounting ensures a smooth, seamless dashboard look Easy plug-in installation Note: Switches not included.
Prices incl. VAT;
Defender Speaker mounts
Mounting rings for speakers - suitable for Land Rover Defender Better sound quality, perfect fit: With these mounting rings, you can install new speakers quickly and cleanly in your Land Rover Defender - without any DIY solutions or improvisation. For easy installation of 100 mm or 130 mm speakers in the Land Rover Defender, either flat (16 mm) or deep (27 mm) design. Scope of delivery: 1 pair
Prices incl. VAT;
Carling Contura switch, hazard warning switch
Carling Contura hazard warning switch available in: black and red - please select the desired color
Prices incl. VAT;
USB socket for Land Rover Defender Td5, Td4, Tdci
USB socket suitable for Land Rover switch openings - USB 3.0 The Land Rover USB socket fits into the factory switch openings on the Defender Td5 (2002-2006) & Tdci/Td4 (2007-2016). The Land Rover USB socket is designed to complement the original Land Rover switch design.To ensure your Defender dashboard maintains a factory appearance, the outlet is equipped with green backlighting. Each Land Rover USB comes with a mini harness to allow for easy two-wire installation.A multi-plug plugs directly into the back of the USB socket for easy removal. The included mini harness comes with a pre-wired inline fuse, so installation requires nothing more than the ignition supply and ground/earth connections. The Land Rover USB socket also fits into the openings in the Freelander 1, Discovery 2 & 'Soft-Dash' Classic Range Rover. Puma Pod II and all Puma double DIN console switch relocation panels are suitable. USB 3.0 Scope of delivery: 1pc USB socket1pcs Mounting Instructions Translated with www.DeepL.com/Translator (free version)
Prices incl. VAT;
Cable entry stainless steel type DD 10, 7-15mm
Cable gland stainless steel type DD 10, 7-15mm The cable bushing offers optimum protection for cables with a diameter of 7-15 mm and is almost 100% watertight thanks to the cable gland. The base plate is made of stainless steel and has a flange diameter of 50 mm. The cable is pulled through the gland and thus effectively sealed. The delivery also includes a rubber seal, a sealing cap and three screws for fastening.
Prices incl. VAT;
12V extension cable for cigarette lighter, with 1 waterproof socket
12V extension cable for car cigarette lighter - waterproof connection socket included Who doesn't know them, the not really cheap 12 V extension cables and adapters from the DIY store? Usually quickly packed just before a trip, disillusionment soon sets in when devices do not work/charge properly due to wobbly plugs, fuses permanently blow because the cables are too thin or there is a short circuit due to moisture penetration. The length of the list of product features shows how much effort and thought has gone into the two cables offered (with one or two sockets): rubber seal on the plug to prevent dust and moisture penetration control LED and 10 A fuse integrated in the plug integrated strain relief to protect the cable waterproof cap on the socket locking system for secure fit (requires corresponding socket) Integrated strain relief to protect the cable all contacts nickel-plated for low contact resistance mountable and dismountable (with suitable adapters) available with one or two sockets
Prices incl. VAT;