Spare Parts and Consumables

Door retaining strap kit REAR left or right for Defender from MY1986 Doors on your classic Landy are not exactly soft close, like on a Rolls Royce, to put it mildly. The rudimentary mechanism has to put up with a lot, so wear and tear is inevitable. Our high-quality door check strap kit for the second row doors is ideal for repair jobs and upgrades because it is designed to last. The components are extremely robust and the workmanship is precise. Installation at the original mounting points is therefore quick and easy. All mounting materials are included.   Suitable for all Land Rover Defenders from MY 1986 onwards.    PLEASE NOTE: The standard door stay bracket is not included. Please take a look at our article TOEWDEF.  

Door retaining strap kit FRONT left or right for Defender from MY1986 Doors on your classic Landy are not exactly soft close, like on a Rolls Royce, to put it mildly. The rudimentary mechanism has to put up with a lot, so wear and tear is inevitable. Our high-quality door check strap kit for the front seats is ideal for repair jobs and upgrades because it is designed to last. The components are extremely robust and the workmanship is precise. Installation at the original mounting points is therefore quick and easy. All mounting materials are included.   Suitable for all Land Rover Defenders from MY 1986 onwards.   

Repair panel rear sump for Defender 110 Td4, Td5 and TDI Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets. For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way. Please select: Complete set 3 pieces consisting of:  Repair plate main part and 2x corner parts 2-piece set consisting of: 2x corner pieces  

Door seal sets for Land Rover Defender - Perfect fit & robust for any terrain Whether replacing classic standard equipment or retrofitting for better sealing: Our selection of door seal sets for the Land Rover Defender offers the right solution for almost every model and year of manufacture. The high-quality seals (original or replica) ensure noticeably less wind noise, reliable protection against water and dust - particularly important for off-road driving or daily use in all weather conditions. Choose from different sets for driver and passenger doors, rear doors and side doors - all custom-fit, durable and easy to fit. More comfort. Less noise. Better sealing. Make your Defender fit for every adventure - with the right door seals from our range.    

Beam wiper blades for the New Defender Looking for replacement wiper blades for the windscreen of your New Defender? Then we definitely have a recommendation for you. These wipers from VALEO deliver exactly what their name suggests: Silencio! And it's not just VALEO’s marketing department – a French global automotive supplier – that says so, because we've tested them ourselves, thoroughly. When you buy VALEO Silencio, you are guaranteed top European quality in terms of materials, workmanship and accuracy of fit. This combination ensures excellent wiping performance over the entire surface without jerking or rubbing and also - as the name Silencio promises - extremely quiet operation.   VALEO uses VisioRubber, a rubber technology that combines the best properties of natural double density rubber with synthetic exterior coating. In our own tests, we experienced far superior efficiency and very quiet wiping without squeaking or smearing. In our opinion, the trade-off with a comparatively shorter service life of these wiper blades is of little consequence given the impressive advantages.    As with all quality wipers, the installation is uncomplicated. Fits all variants of the New Defender (MY 2020). Set includes two wiper blades.Product size 55x2x3cm  

Switch for indicators, high beam and horn for Land Rover Defender suitable for Land Rover Defende from VIN ...WA138480 (Defender TD5 from MY1998) to FIN ...EA999999 (Defender TD4 up to MY2014)

Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.  

Mounting screw suitable for mounting bracket injection nozzle - Defender TD4 2.2 and 2.4 here in the store Dimensions: 8cm x 2cm x 2cm

Mounting bracket suitable for injectors - Defender TD4 2.2 / 2.4 from MY2007 onwards suitable screws for mounting can be found here in the store

There are a few mods to the classic Landy that anyone can - and should - do themselves. Replacing the original Land Rover door hinges is definitely one of them, as their half-life is notoriously short. The original parts corrode, cause rust streaks on the paintwork, leak or become wobbly. Especially at the tailgate with the heavy spare wheel mounted, the load often becomes too much of a strain for the OEM parts. Sooner or later, they become a nuisance. But there is a solution: greased replacement hinges from Offroad Monkeys provide a quick and lasting remedy. Made of a high-strength aluminum-titanium alloy and sporting corrosion- and UV-resistant coating, both look and function are ensured for the long term. No more rusting, jamming or sagging hinges, guaranteed! Whether on the side doors or the cargo door, all Offroad Monkey hinges feature a few extremely clever details: Stainless steel bolts with spiral grooves for more effective greasing; removable grease nipples with grub screw replacements; exchangeable bearings/bushings and last but not least perfectly fitting seals to prevent contact corrosion and paint damage. The hinges are 100% Made in Germany, they can be completely disassembled and also be painted.  Front door kit includes: 4 hinges incl. Seals Passenger back door kit includes: 4 hinges incl. Seals Tailgate kit includes: 3 hinges Mounting kit incl. Seals  

Retaining clip / bonnet bar Plastic clip bonnet bar for Land Rover Defender Td5 and Td4 up to year of construction 2016 suitable for bar diameter 8mm

Lockable tank cap When fuel prices are high, opportunistic fuel thefts skyrocket and this affects us both at home and when traveling abroad. Furthermore - especially in our cities - SUVs and 4x4s are preferred targets for sabotage and vandalism by supposed climate activists and other thugs. Under these circumstances, it is hard to understand why high-priced cars such as the New Defender (from MY2020) do not come with lockable fuel filler caps. If you want to prevent thieves and saboteurs from gaining easy access to your fuel tank, we offer a lockable replacement cap with two keys. In addition to the New Defender, this lockable fuel cap fits the following models: Discovery 3 MY2004-2009Discovery 4 MY2009-2016Discovery5 from MY2014Discovery Sport Typ LC ab BJ2015 Range Rover (not Vogue) from MY2007Range Rover Evoque L538 MY2011-2018Range Rover Hybrid L405 from MY2013Ranger Rover Sport from MY2007Range Rover Velar from MY2017 Defender from MY2020 Jaguar E-Pace X540 from MY2017Jaguar F-Pace X761 from MY2016Jaguar F-Type (not USA) X152 from MY2013Jaguar XE from MY2015Jaguar XF from MY2007Jaguar XJ X351 MY2010-2019Jaguar XK Cabrio from MY2006Jaguar XK Coupe from MY2006

Fuel cap lockable Matte black, resistant to corrosion and UV exposure and featuring a classic design - the Offroad Monkeys’ fuel cap is a real upgrade for classic Landies Td5/Td4 and a whole range of other models from the Alfa Romeo GTV (up to MY 2005) to the Volvo XC70 (from MY 2007). Made of high-strength aluminum, this replacement fuel cap is simply perfect in form and function. Very easy on the eye and very pleasant to handle, it is of course lockable as well. 100% Made in Germany. Delivery includes 2 keys. Note: the filler cap does not fit the new Defender models from Bj. 2020 (new series)  

Gasket set for Alpine windows for Defender from MY1990 to 2016 Usually suitable for Defender from MY1990 onwards here the 4mm thick window was installed ex works (the thicker window with 5mm was usually only installed on series and Defender up to MY1990). If you are unsure, measure the thickness of the disc. Scope of delivery: 1 piece gasket for Alpine window 1 piece filler strip for Alpine window

Oil seal crankshaft rear Fits DEFENDER 2007 and later.

Heated windshield wire harness complete with Carling Contura switch for Defender equipped with OEM style heated windshields with two tabs or wires - one in each corner. Carling switch will require assembly. The kit requires minimal connections such as positive and negative terminals, ignition power and lighting power. The kit is rated at 20 amps with a turn-on time of approximately ten minutes and is suitable for use with the heated window part number CMB000411 or equivalent. The power cable is 500 mm long and is terminated with M8 rings from the relay set to the battery. The supply cable for the heated screen is 3000 mm long and terminates with an insulated lug socket. The screen grounding cable is 500 mm long and is supplied with a cable lug socket and an M8 ring terminal. suitable for heated windshield here in the store.

LOF Brake Shoe - Complete Axle Set Description:A set of 4 brake shoes to overhaul 1 complete axle on a 10" / 11" Series 2A / Series 3 Land Rover.The shape and precision of the brake shoes match the drums, with a brake compound designed to combat squeaking and judder! All stock owners will know what is meant! Also, the shoes have been fitted with a solid, correctly shaped post rivet to hold the spring in place, you will know that cheaper brands have a straight cut rivet that tends to fall out! Notes on Defender brake parts:all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with R90 identification.

4x Brake Pads - LOF Brake Pad and Mounting Kit   POWERspec brake pads: LOF POWERspec brake pads are designed for tuned and modified hard working axles.High braking power, improved coefficient of friction (0.57). Designed for fast road use to stop heavily loaded vehicles, including tractors.POWERspec brake pads have edge chamfers that reduce noise but do not reduce service life, uncoated, minimal scattering required. The pads have a noise reducing washer on the back of the pad. Notes on Defender brake parts: All brake pads offered for the Defender have an R90 designation and are therefore registration-free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation.   1. LOF brake pad mounting kit for : Defender 90/110/130 front axle (MY1994-2016)  What is included in the kit? 4x LOF 50V brake pads (ROAD/POWER) 1x STC8575 installation kit 1x LOF Ceratec brake grease 2. LOF brake pad installation kit for : Defender 110/130 rear axle (MY 1998-2016) What is included in the kit? 4x LOF 110 brake pads (ROAD/POWER) 1x 4105 mounting kit 1x LOF Ceratec brake grease 3. LOF brake pad mounting kit for : Defender 90 rear axle (MY 1994-2016) What is included in the kit? 4x LOF 90 brake pads (ROAD/POWER) 1x STC8574 mounting kit 1x LOF Ceratec brake grease    

Axle stop rubber for Land Rover Defender up to BJ 2016 Specification: Category: Axles and Suspension Engines: All Fuel: Diesel, Petrol Premium range: ANR4188G: Yes / ANR4189: No Transmission: Manual, Automatic Specification NAS - North American Specification, NOT-NAS - Non North American Specification Quality rating: 100 Drive Type: Drive Wheel 2WD - Two Wheel Drive, 4WD - Four Wheel Drive Fits DEFENDER 1986 - 2006, DEFENDER 2007 AFTER, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC.

Repair kit shift linkage / transfer case The transfer box on a Defender not only transmits the power from the engine two both axles, it also houses the middle diff lock as well as the reduction gearbox. The linkage connecting the transfer box to the low ratio/diff lock stick is naturally prone to heavy wear and tear. The repair kits give you the option to completely replace all worn bushes, bolts and the hexagon screw in the linkage. Nut, washers and SL retaining clips for the bolts are all included. Please note: Repair kit (REPSET-VEGE-LA) is compatible up to chassis-nr. LA999999 (ca. MY1994) Repair kit (REPSET-VEGE-MA) is compatible from chassis-nr. MA000000 (ca. MY1995)

Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!

The areas around the doors are corrosion hotbeds in a Defender. Even though this is a well-known fact, the rust remains very often undetected and keeps eating into structural components and body panels. The doors feature many corners, angles and surfaces that constantly trap water and wet dirt. Screw fittings, rivets, welding points, the combination of different materials like steel, aluminum and rubber as well as mechanical stress often exacerbate the problem. If you are facing large scale restoration work in your 4/5 door Defender, you might consider whether a complete replacement of B and C pillars as well as the door sill isn’t the cheaper, quicker and most of all more thorough solution. We are offering entire sets for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you need to replace only the C posts you can find them here.

All the nooks and crannies in your Defender attract and hold water or wet dirt, which makes them a hotbed for corrosion – small wonder that the door areas are often affected by rust. Especially the C pillars in 4/5-door models frequently require replacement in Defender restorations because fittings, screw holes, undersides and the gaps between struts and body panels are a breeding ground for corrosion and often develop critical damage. Instead of piecemeal repair with angle grinder and welder, it’s often preferable to swap the entire component. We are offering individual C posts for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you prefer to replace the entire door frame with B and C posts and also the sill, you can find the entire set here.

Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3 Enhance the appearance of your Land Rover! Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III. These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.

Doors for Land Rover Defender Suitable for Defender TD4 2007 onwards The doors are primed. Available for front, back, left and right - Please choos the desired variant.

Door hinge set for front doors for all Defender / Series3 Door hinge set for rear door for all Defender, Series 2 & 3 Door Hinge Set for Middle (2nd) Door Row for all Defender Steel fixing bolt set included in delivery

Steering knuckle repair kit Defender from MY99. Please select the appropriate variant that you need. Important Information:This set is only for one side, if you need it for the complete axis, please order 2 times.

Service Kit for Land Rover Defender Td4 Just one order number and you have all the replacement parts for a complete service on your Land Rover Defender 90/110/130 with TD4 engine (2.4 or 2.2 litre). Never again have to interrupt a service because you forgot to order all the necessary parts too! This service kit contains high quality products manufactured to O.E. specifications, but still offered here at a very attractive price.Contents:    Oil filter (optional LR058104 for 2.2 from DA444247 OR LR004459 for 2.2 and 2.4 up to DA444246).    Fuel filter    Air filter    Oil drain plug with rubber gasketThe use of a fuel breather pump is essential for the correct replacement of the fuel filter, otherwise the high-pressure pump of the common rail system will inevitably be damaged or even destroyed.

Clear Vision in Any Weather: Continental Flat Blade Wipers for Your Defender! You know the drill: rain, snow, or spray – and your old windshield wipers smear more than they wipe? Especially in a Defender, where good visibility over rough terrain is crucial, you shouldn't make any compromises. Upgrade now to modern Continental flat blade wipers and experience the difference! This set is a perfect fit for your Land Rover Defender and brings the technology of modern vehicles directly to your windshield. Here's what the Continental Flat Blade Wipers offer you: Superior Wiping Performance: Thanks to the aerodynamic design and even pressure distribution, flat blade wipers provide a significantly cleaner and streak-free wiping result – even at higher speeds. Longer Durability: Flat blade wipers are often more resistant to weather influences and wear than conventional bracket wipers. Modern Look: Give your Defender a subtle yet modern touch. Less Wind Noise: The flat design can reduce wind noise compared to bulky standard wipers. Easy Installation: Changing them is child's play and done quickly. Old wipers off, new Continental wipers on – done! Complete set: The set consists of either two or three identical wipers for the windscreen and rear window of your Land Rover Defender 90/110/130. No more poor visibility and annoying juddering! Treat yourself and your Defender to an upgrade that you'll immediately appreciate on your next rainy drive. Ensure clear vision and safety! Order your set of Continental Flat Blade Wipers now!

The tank protection plate for the Land Rover Defender 90/110/130 of the Td5 and Td4 series (2.4 and 2.2) protects the entire width of the tank from dents, damage and leaks during off-road use. This prevents vehicle downtime and costly environmental damage.   The tank protection plate can be used in conjunction with standard trailer couplings. It is made of weight-optimised, 6 mm thick, anodised aluminium.   Please select your vehicle type below.      

Spare gasket set 4 pcs. for Aschcroft MT82 intermediate shaft 2 pieces precision O-ring 43,82 x 5,33mm2 pieces precision O-ring 75 x 2mm

profile for body rear or rear tub, 3-pcs Spray from wet roads, rain water, dirt, chemicals and mechanical stress all take their toll on the rear of the classic Defender (up to MY 2016) and the Land Rover Series III, especially on the trim strip under the edge of the tail gate. This aluminum profile helps to seal the door and the cargo hold, it protects the loading edge and also holds down the carpet or floor mat in the cargo area. No wonder that it frequently has to be replaced, whether it’s for visual defects or functional degradation. Our replacement profile matches the Land Rover OEM part (AQR710020) in form, function and quality, but offers a lot more value for money, as it only costs about half as much.