Vehicle accessories

MOMO steering wheel TUNER with silver spoke, with TREKFINDER steering wheel hub MOMO steering wheel model "Tuner" with TREKFINDER steering wheel hub - EXCLUSIVE only available at Naktanenga!The TREKFINDER steering wheel hub has a TÜV parts certificate and is therefore in combination with the MOMO steering wheels uniquely suitable for German road traffic!You need a steering wheel hub to mount the MOMO steering wheel.The MOMO steering wheel TUNER is a beautifully designed, classic 3-spoke steering wheel. The silver spoke visually rounds off the small and easy-grip steering wheel!MOMO steering wheels are characterised by an extremely high-quality finish. During development, special attention was paid to a sporty appearance and a high level of grip.Screws for fastening the steering wheel are included in the scope of delivery.The leather cover with Land Rover emblem can be purchased OPTIONALLY here.Technical data:Model: TUNERSurface material: genuine leather, black ; silver spokeStitching colour: blackDiameter: 35 cmCertificates: ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. You need a steering wheel hub to mount the steering wheel. If you already own a MOMO sports steering wheel, you can continue to use its hub.Defender up to model year 2014 and serial number up to EA999999KK807 for vehicles with 36 spline/teeth and 17 mm diameter KK810 for vehicles with 48 spline/teeth and 19 mm diameterDefender from model year 2014 and serial number FA000001 onwardsKK811 for vehicle with 48 splines/teeth and 19 mm diameterIf you have a Defender up to model year 2014 and serial number up to EA999999, it is essential that you determine the number of splines/teeth and the diameter on the steering column in advance.Please note:Steering wheels made of leather are particularly hard-wearing as they are constantly touched. Leather is a natural product that shows signs of wear over time, e.g. abrasion, the material becomes brittle or the colour changes. Since the material is open-pored, hand perspiration and skin oils are gradually absorbed into the leather. But hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or care for it regularly (approx. every 3 months).You can find good cleaning and care products in specialist shops.

For the highest demands MOMO steering wheel model ‘Competition’ with TREKFINDER steering wheel hub – EXCLUSIVELY available from Naktanenga! The TREKFINDER steering wheel hub has a TÜV parts certificate and, in combination with MOMO steering wheels, is therefore uniquely suitable for use on German roads!   You will need a steering wheel hub to install the MOMO steering wheel.   The MOMO COMPETITION steering wheel is an elegant, classic 3-spoke steering wheel with a black horn ring. MOMO steering wheels are characterised by their extremely high-quality workmanship. During development, particular attention was paid to creating a sporty look and a high level of grip. Screws for attaching the steering wheel are included in the scope of delivery.   The leather cover with Land Rover emblem can be purchased OPTIONALLY here.   Technical data: Model: COMPETITION Surface material: Genuine leather, black Seam colour: Black Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate included. A TÜV inspection is required.    Lenkrad Modell "Competition" mit TREKFINDER Lenkradnabe - EXKLUSIV nur bei Naktanenga erhältlich!   You will need a steering wheel hub to install the steering wheel. If you already have a MOMO sports steering wheel, you can continue to use its hub.   Defender up to model year 2014 and serial number up to EA999999 KK807 for vehicles with 36 splines/teeth and 17 mm diameter  KK810 for vehicles with 48 splines/teeth and 19 mm diameter   Defender from model year 2014 and serial number from FA000001 KK811 for vehicles with 48 splines/teeth and 19 mm diameter   If you have a Defender up to model year 2014 and serial number up to EA999999, you must first determine the number of splines/teeth and the diameter on the steering column.   Please note: Leather steering wheels are subject to particular wear and tear as they are constantly being touched. Leather is a natural product that shows signs of wear over time, such as abrasion, brittleness or discolouration. As the material is open-pored, hand perspiration and skin oils gradually soak into the leather. However, hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or maintain it regularly (approx. every 3 months). Good cleaning and care products are available from specialist retailers.

Your G Needs Access – Safe and Stylish with the NakatanengaCargoBear Rear Ladder! You love your Mercedes G and use it for what it's made for: adventure! But what good is the best roof rack if the equipment on it is hard to reach? Especially with an imposing vehicle like the G-Class, safe access is worth its weight in gold. Our CargoBear rear ladder for the right-hand side of the vehicle is the solution – robust, a perfect fit, and elegant. Thoughtfully Designed Down to the Last Detail for Your Comfort and Safety: This rear ladder is more than just a simple step. Made from lightweight yet extremely stable aluminum, it makes accessing your roof rack child's play. Ergonomic and Safe: With its four wide rungs and clever angling that follows the contour of your G's rear, you can climb up and down comfortably and, above all, safely. The ladder is wider at the bottom than at the top, which makes descending even easier. Robust and Chic: The high-quality powder coating in a silk-matt black not only looks great but is also extremely resistant to the rigors of everyday off-road life. Perfect Fit for Your G: Our rear ladder is suitable for a variety of G-Class models: W460 (model year 1979-1992) W461 (from model year 1992) W462 (ELBO variant) W463 (model year 1990-2018) Flexible Mounting: The ladder is simply hooked into the rain gutter at the top and screwed in. For the lower attachment, you have a choice: Standard: Secure attachment with strong 3M double-sided adhesive tape. Optional: For an even more robust connection, you can drill two holes and screw the ladder on with the supplied blind rivet nuts. G Professional: Here you can mount the ladder directly to existing screw points on your vehicle. Make your Mercedes G even more functional and safer. With the CargoBear rear ladder, you can reach your equipment on the roof in no time and give your vehicle a professional look at the same time. Get this indispensable accessory now!

Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.

Storage compartment footwell for Land Rover Defender TD4/TD5 Every Landy draws attention, for sure, but often enough it’s the unwanted kind from thieves and car burglars. That’s where this nifty and inconspicuous modification comes in for Defender models Td5 and Td4 (90/110/130) – whether camping conversion, expedition vehicle or your regular standard spec Landy. Our hidden underfloor locker for the front footwell is integrated in the floor panel and thereby creates a lot more security for your valuables. Secured by a lock, dust- and watertight and in most cases hidden by floor mats, the underfloor boxes are the ideal storage space for all those extremely important small things: documents, passports, wallets, expensive electronics, gadgets, tools, medication etc. Sporting a volume of ca. 7 liters, this roughly square storage box will hold an astounding amount of your most valuable items. Since the boxes are mounted underneath the footwell floor, we make them from extremely robust, powder-coated stainless steel. Installing the assembly kits for Td5/Td4 in the right or left front seat footwells is really simple. Other areas in the vehicle body are also suitable for mounting the locker, the cargo hold for example. In these cases, you can order the box also without the panel. If you own non-standard Defenders or older models, where the Td5/Td4 panels won’t fit, you should also choose the “locker only” option. The same applies if you simply want to make the cuts yourself in the existing floor panels. Important during installation: the flattened edge of the box must always face the centre of the vehicle during installation! Please note, if a tank or other additional attachments are mounted below the bottom plate, it is not possible to mount the storage box. Material: Box: Stainless steelFootwell panel: Aluminum

Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.

Modular vehicle panel, for Ineos Grenadier rear side windows, exterior Ineos intended the Grenadier to become the heir to the old Defender in terms of off-road capability and versatility. Many well-designed details show that this was no empty promise by Ineos. The standard airline rails above the rear mudguards, for example, are a feature that every proper 4x4 should have, because real off-roaders or overlanders want to transport important equipment on the outside of the vehicle without having to drill holes or making other destructive modifications. Our modular MOLLE vehicle panels for the Grenadier are very easy to attach to the airline rails mentioned above and the rain gutters via stainless steel brackets. The universal design allows mounting on both the left and right side of the vehicle. Dismantling possible without leaving a trace. The sturdy mount plate made of black powder-coated aluminum enables the safe transport of anything that is MOLLE-compatible and can be attached with straps, clamps or quickfists, for example. The maximum load capacity is 25 kg, roughly equivalent to a 20-liter canister of water or fuel. By the way: The panels are also available in a double pack at a discount price of € 699. All fastening materials are included. Dimensions: 49,5 x 90 cm Max. Load capacity: 25 kg Please note: with some roof racks, there may be problems during installation. The area in front of the grab rail must be free, please check beforehand. CGB-Ineos works 100%.

Reliable compressed air everywhere – VIAIR 400P mobile Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  tyre inflator incl. pressure gauge  aluminium stand or plate  connection from stand to compressor by vibration-reducing silent blocks  replaceable air filter  battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 12 Volt max. current consumption: 30 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. compressor should pause for approx. 40 minutes  with on/off switch  dimension: length 28 cm / width 15 cm / height 19 cm  weight: 4.8 Kg  protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: 0 to 2 bar - 3 min 00 sec.  1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  0 to 2 bar - 4 min 20 sec.  1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  0 to 2 bar - 5 min. 20 sec.  1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.  Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.

Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130 Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting.Delivery incl. bolt and retaining clip. Surface: optionally black primed or hot-dip galvanised. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.    

Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until 2016.    Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request.    Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated    Integrated recovery eyes (22.5 mm diameter)    The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. This underride protection can be fitted to both right-hand drive and left-hand drive vehicles.   

Durable Aluminum Fender Plates – Non-Slip & Stable, Made in Germany Chequer plate wing top protection for all Land Rover Defender 90/110/130 from model year 2007. Made of 3mm aluminum with additional powder coating (all RAL colours). Supplied in pair with rivets. Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate.  

BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design. With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18,  255/70R18;  265/65R18; A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: rim 16 inch, incl. matching wheel nuts Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!

Bonnet holder with style and function - for Mercedes-Benz G-Class The bonnet holder is one of the typical weak points of the Mercedes G-Class: Rust builds up quickly, making it difficult to open the bonnet and impairing its function in the long term. Our solution: high-quality bonnet brackets made of aluminium - a durable and well thought-out alternative.Thanks to their robust design and sophisticated features, rusting hinges are a thing of the past. The bonnet can be removed in a few simple steps and maintenance is easy thanks to the integrated grease nipple. A reinforced stainless steel pin with spiral groove ensures optimum distribution of the grease - for long-lasting smooth operation.The advantages at a glance:  Suitable for Mercedes-Benz G-Class models W460 / W461 / W463 up to model year 2018  Quick and easy removal of the bonnet  No more rusting or jamming  Made from high-strength, precision-milled aluminium  Corrosion and UV-resistant thanks to special coating precision-milled aluminium  Corrosion and UV-resistant thanks to special coating  Lubricatable via integrated grease nipple  Stainless steel plain bearing (replaceable)  Stainless steel bolts with spiral groove for perfect grease distribution  Plastic washers to prevent contact corrosion  Registered design  Can be painted and completely dismantled  100% Made in Bavaria Scope of delivery:  2 bonnet brackets  Including precisely fitting seals to protect the paintwork  All stainless steel screws required for installation included The matching door hinges, rear door hinges and window hinges for the Mercedes G are also available from us.

Rust-free windscreen frame hinges for the Mercedes-Benz G-Class Rust on the windscreen frame hinges is now a thing of the past - with the high-quality hinges from Offroad Monkeys!It's not just the door hinges on the G-Class that are susceptible to rust - the windscreen frame hinges also show unsightly marks over time. Our solution: high-precision hinges that are not only functional but also visually appealing.Thanks to the sophisticated design, the entire windscreen frame can be removed quickly and easily - ideal for maintenance, conversion or servicing. Manufactured from high-strength aluminium and finished with a durable black special coating, the hinges are permanently resistant to corrosion and the effects of the weather.Your advantages at a glance:  No rust, no jamming  Permanently smooth operation  High-precision  milled from robust aluminium  Corrosion- and UV-resistant special coating  Can be lubricated via integrated grease nipple  Replaceable stainless steel plain bearing  Stainless steel bolts with spiral groove for optimum grease distribution  Plastic washers to prevent contact corrosion  Can be painted and completely dismantled  100% developed and manufactured in Bavaria Scope of delivery:  2 hinges (for driver and passenger side)  High-quality assembly set with stainless steel screws The matching door hinges and rear door hinges, as well as hinges for the bonnet for Mercedes G are also available from us.

Maximum flexibility: Dixon-Bate height adjustment with integrated changing system The Dixon-Bate quick release allows for a quick switch between ballheads, while at the same time being height adjustable either up to 150 mm or up to 200 mm. Thanks to the Dixon-Bate system everything with a 90x45 mm hole pattern can be mounted, in various heights, behind your car, regardless of whether it's a ball head or something else. Details:Hole Pattern: 90x45 mm M16 S Value: 350 kg D Value: 23.41 kN max. Towing Capacity: 3.500 kg Thanks to the E-certificate, in Germany, this part can be added to your car without having to go through the TÜV. The quick release system is especially useful when using the Land Rover towing hitch step. The product ships including the needed hardware and an instruction manual. Please select one of the options from the drop-down menu.

Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.

Nakatanenga CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Steering column lock with door lock cylinders complete set Defender  Steering column lock with three door lock cylinders and two keys for Land Rover Defender from VIN 2A622424 model year 2002.Note: The scope of delivery does not include shear bolts! You can find clamps for ignition locks here in the shop. Shear bolts can be found here in our store.

Transmissionguard, galvanized steel 4mm, for Land Rover Defender TD5 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.

Roof console Land Rover Defender - transverse Roof console for Land Rover Defender 90/110/130, is mounted crosswise to the direction of travel, provides a DIN slot and storage space. The Nakatanenga switch bundle with 7 on/off switches is suitable for mounting in the DIN slot.Not suitable for vehicles with sunroof.Available in grey and black.

Can of Mike Sanders Anti-Corrosion Grease - 25 kg Base price per 1 litre: EUR 10.42 Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products. 

Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions.  Additionally and for an even easier instalation, all the nuts and bolts are already included.

Various sets of door hinges for Mercedes Benz G-Class Many owners of the G-Class know the problem only too well: the original door hinges start to rust, the paint flakes off and the doors become increasingly difficult to open and close. This is exactly where we come in - with a long-lasting solution: high-quality door hinges made of high-strength aluminium offer optimum protection against rust and corrosion thanks to a special surface finish.The centrepiece of the design is a tried-and-tested stainless steel pin with a milled spiral groove that distributes the grease ideally. Thanks to the integrated grease nipple, the hinges can be easily re-greased at any time. Of course, we also supply everything you need for installation.Advantages with the Offroad Monkeys door hinges for the G-Class: Suitable for Mercedes G 460 / 461 / 463 up to model year 2018  Available for 2- and 4-door models - or individually for one door  No rusting, no more jamming - Made of high-strength aluminium  precise and robust  Corrosion and UV-resistant thanks to special coating  Lubricatable via integrated grease nipple  Stainless steel plain bearing replaceable  Stainless steel bolts with spiral groove for even grease distribution  Plastic washers included to protect against contact corrosion  Registered design  Paintable & can be completely dismantled  100% Made in Germany Door hingeSet for only one door (left or right)  Suitable for the respective side  front and rear  Contains 2 door hinges  Includes precisely fitting seals and all necessary stainless steel screws Door hinge set for 2-door G-Class Contains 4 door hinges  With matching seals and stainless steel screws Door hinge set for 4-door G-Class  Contains 8 door hinges  With matching seals and stainless steel screws Tools for easy removal of the catch bolts can be found here.The matching window hinges, rear door hinges and bonnet hinges for the Mercedes G are also available from us.

Towing and recovery eyes for the New Defender - Robust. Conspicuous. Indispensable. Do you want your New Defender to be not only stylish, but also absolutely suitable for off-road use? Then our red towing and recovery eyes are just the thing for you! This set of 1 pair of eyelets for the rear of your New Defender combines high functionality with a striking design - perfect for anyone who wants to be prepared for any adventure.   Why towing and recovery eyes for the New Defender? Whether off-road, on unpaved roads or in an urban environment - sometimes you simply need a reliable way to secure or recover your vehicle. Our towing and recovery eyes offer you the safety and robustness you need to be prepared for any situation. And all in an eye-catching red colour that is not only practical, but also a real eye-catcher. Advantages at a glance: High-quality materials: The eyelets are made of robust cast steel and offer maximum resilience. Eye-catching design: The bright red not only ensures better visibility, but also gives your Defender a striking look. Easy to fit: The eyelets have been specially developed for the New Defender and can be installed without modifying the vehicle. Versatile: Perfect for towing, recovering or securing your vehicle in any situation - an always-ready mount for tow ropes and recovery straps. Who are the towing and recovery eyes suitable for? Off-roader: For all New Defender drivers who are travelling off the beaten track and want to be prepared for any situation Adventurer: Perfect for outdoor enthusiasts who want to be able to recover their New Defender safely even in the most difficult terrain. Design lovers: If you want to give your New Defender a sporty and functional look, these eyelets are the perfect choice.  

Nakatanenga CargoBear Roof Rack Crossbar Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks. The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper. If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material. Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space) Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all Cargobear 2 roof racks

Spare wheel holder with checker plate for bonnet on Land Rover Defender, black powder coated A reinforcement plate is only required for the TD5 and is only supplied there.

TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of  '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet, black powder-coated. Delivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Chequer plate cladding for the bonnet Finally also available for the Land Rover Defender Td4 from MY07: chequer plate trim for the new bonnet (black powder-coated) This article is bulky goods. Material thickness: 2.5 mm base thickness / 4 mm incl. corrugation (quintet plate)

Nakatanenga Sand Plate Heavy Duty A sand plate is a tool used to recover stuck vehicles. Sand plates are also called air landing plates.Professional sand plates are used wherever heavy vehicles sink into soft ground. They are an important aid when driving in impassable terrain, especially sandy deserts or muddy areas, to free sunken vehicles again or to drive over obstacles.The plates are also used as a base for jacks - by distributing the force over a larger area.Originally, they were also used to fix runways for small aircraft. Even heavy 4x4s, off-road or trucks can use them to bridge mud, snow, sand or around ditches.For vehicle recovery, the drive wheels are dug free in the desired direction of travel and the individual sand plates are rammed under the wheels as horizontally as possible.After successful recovery and finding a safe location, colour-coding and / or tying with a rope makes it easier to recover the sand plates that have been thrown to the rear.On longer dune or mud stretches, the rope connection is particularly useful, as otherwise there is a risk of the vehicle sinking again during the recovery stop or when starting up afterwards.Info: In contrast to the standard version, the Heavy Duty sand plates have a welded-on doubling in the middle. Available separately: bag for sand trays, carrying strap for sand trays. Material thickness: 4 millimetresVersion: Standard or Heavy DutyMaterial: aluminiumWidth: 44 cmHole diameter: 6 cmPrice per piece

Adventure 4x4 - Rear tread plate Ineos Grenadier The ABNTR4X4 rear tread plate in black for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. Thanks to its shape, the tread plate not only protects the rear bumper but also ensures that the light influences in the reversing camera are minimised and thus the view is not impaired. Thanks to its studded surface, the rear kick plate fits perfectly into the Abenteuer4x4 product range. Bolting to original mountings. The tread plate can also be riveted to the bumper using the additional holes. Technical data: Suitable for Utility 2- & 5-seater Trial- & Fieldmaster Quartermaster Dimensions: 952x132x105mm (LxWxH) Weight: 2 kg Delivery: 1 x rear step plate INEOS fastener

Rear ladder left, black powder-coated What makes a good rear ladder? It is sturdily constructed and allows safe and easy access to the roof rack in all weather conditions. That much is clear. A VERY good rear ladder, like the one from Terrafirma, also fits aerodynamically to the shape of the bodywork, minimizing fuel consumption and wind noise. In addition, the view of the rear lights remains unrestricted and opening the rear door is not impeded in any way. The Terrafirma rear ladder for the New Defender (from BJ2020) is made of 25 mm steel tubes and has non-slip perforated steps and a durable powder coating in elegant black.  Installation instructions and mounting materials are included.