Compressor connection kit with 4 nozzles - suitable for many inflatables Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.

VIAIR 89P-RVS - the compressor especially for campers and motorhomes Technical data:- Suitable for tyre sizes max. 245/70R19.5- Delivery volume: at 0 bar 41.7 L/min, at 3 bar 31.5 L/min, at 5 bar 23.6 L/min and at 7 bar 14.9 litres per minute- Max. working pressure: 120 PSI/8.2 bar- max. voltage: 13.8 volts- max. current consumption: 20 amps- max. ambient temperature for operating the compressor: 70° Celsius- min. ambient temperature for compressor operation: -20° Celsius- max. possible operating time: 25 minutes at 30 PSI- with on/off switch- dimensions (L x W x H): 25cm x 8,1cm x 14,2cm- weight: 2,15 Kg- Protection class: IP53Features:- Stainless steel valves guarantee long-lasting and optimal shutter speeds- generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life- Anodised cylinder surfaces increase protection against abrasion- the piston motor with PTFE piston rings ensures low-friction and optimised smooth running and a long service life- the motors are protected against splash water and thus maximally resistant to corrosion- Integrated, automatic overheating protection for a long compressor service life- CE markingScope of delivery:- 6 metre air hose- 3 metre battery cable with battery terminals- Tyre inflator (solid brass)- Pressure gauge on compressor- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- three additional valve adapters- a high-quality carrying bag Example filling times for the VIAIR compressor kit model 89P-RVS:50 to 60 PSI / 3.4 to 4.1 bar 1 min. 11 sec. (±05 sec.)60 to 80 PSI / 4.1 to 5.5 bar 3 min. 28 sec. (±10 sec.)80 to 90 PSI /5.5 to 6.2 bar 1 minute. 40 sec. (±05 sec.)The model designation "RVS" stands for "RV-Safe", as these compressors have been specially developed and tested for the motorhome market.A mobile and above all portable compressor should never be missing on board a camper or motorhome. The VIAIR 89P-RVS is such a mobile and lightweight 12-volt compressor, specially designed for Class B motorhomes. This compressor inflates most Class B (CP) tyres from 5.5 bar to 6.2 bar (80 to 90 PSI - follow manufacturer's instructions!) in less than 2 minutes. The 89P-RVS has a new and improved longer air hose to reach the tyres comfortably.The tyres are the connecting element between the vehicle and the road. Enormous forces are transmitted over a relatively small area. To be able to guarantee this in the best possible way, regular checking of the tyre pressure is essential, especially for motorhomes. Don't forget to check the spare wheel as well. However, this can be quite inconvenient for many campers, as the spare wheel must first be removed from underneath the floor - something that people tend to do without at the petrol station.For an RV compressor, power is of course crucial. Here, the 89P-RVS offers a maximum working pressure of more than 8 bar - quite sufficient for all compressed air applications you are confronted with as a camper. Please note: The 89P-RVS is not compatible with Presta bicycle valves!Due to the high currents that flow when operating the compressor, it must only be connected directly to the battery via the supplied clamps. However, with the 6m hose, which is also included in the delivery, you can also reach the rear wheels comfortably.As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Please note: We have adapted our Viair range. You will still find all standard products. One of the reasons we have decided to reduce the range is to guarantee better availability.

88P-SXS Portable Compressor For up to 33″ TiresNAVIA-00082– 120 PSI / 1.97 CFM VIAIR 88P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit. SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 25 min. @ 30 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP53 Max. Ambient Temp: +158°F Min. Ambient Temp: -4°F Dimensions: 9.8″L x 3.2″W x 5.6″H Net Weight: 5.30 lbs. Power Cord Length: 10 ft. Air Hose Length: 16 ft. Power Cord: 10 ft. / Air Hose: 16 ft. FEATURES: 120 PSI Pressure Gauge LED Work Light / Power Indicator Dual Battery Clamps w/2-Pin SAE Connector Permanent 2-Pin SAE Connector for battery with 20-amp Inline Fuse Holder 2-Pin SAE Connector with 20-amp Inline Fuse Holder Solid Brass Twist-on Tire Chuck Heavy Duty Carry Bag with Straps and Hardware for Mounting 3 pc. Inflation Tips Kit* Presta Valve Adaptor * Mounted above Rear Compressor Feet FILL RATES:31″ X 10.5″ 0 to 30 PSI 3 min. 30 sec. (± 10 sec.)15 to 30 PSI 2 min. 10 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 5 min. 15 sec. (± 15 sec.)15 to 40 PSI 3 min. 00 sec. (± 05 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 88P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 88P does not work with the VIAIR Winterization Kit.

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

TLC PRO Air Compressor Kit P/N 42046 – 150 PSI / 2.62 CFM The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35”. The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it.SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 150 PSI Max. Amp Draw: 30-Amps Ingress Protection Rating: IP54 Dimensions: 10.87″L x 5.83″W x 7.48″H Net Weight: 11.80 lbs. Power Cord Length: 8 ft. Air Hose Length: 30 ft. * For 12V Only. FEATURES: Shop-Style Inflator with 160 PSI Gauge Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose Blow Gun Extruded Aluminum Air Tank 2-Pin SAE Connection with Battery Terminal and Clamp Options 40-Amp Inline Fuse Holder Vibration-Resistant Diamond-Plate Sand Tray Deluxe Carry Bag  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2 Bar – 0-50 PSI/ 0-3,4 Bar  0-20 PSI/0-1,3 Bar – 0-40 PSI/0-2,7 Bar  25mm - 5 sec. 10 sec.  35mm - 3 sec. 6 sec.  2.0″  - 5 sec. 12 sec.  28mm - 7 sec 12 sec.  38mm - 3 sec. 7 sec.  2.3″  - 6 sec. 15 sec.  30mm - 8 sec. 14 sec.  42mm - 4 sec. 9 sec.  2.6″  - 7 sec. 17 sec.  32mm - 10 sec. K.A.  45mm - 4 sec. 10 sec  3.0″  - 9 sec. 19 sec. FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 00 sec. (± 10 sec.)15 to 30 PSI 1 min. 35 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 4 min. 20 sec. (± 10 sec.)15 to 30 PSI 2 min. 05 sec. (± 05 sec.)35″ X 12.5″ 0 to 30 PSI 5 min. 20 sec. (± 15 sec.)15 to 30 PSI 2 min. 45 sec. (± 05 sec.)* Tolerances (±) define a range within which actual performance may fall. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 400P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 400P does not work with the VIAIR Winterization Kit.  

VIAIR 330C-HG 200 PSI (13.8 bar), 12V CE compressor Specifications/ technical data: 12-volt Permanent magnet motor Duty cycle: 100% @ 100 PSI ( 6.9 bar ) Duty cycle: 50% @ 200 PSI ( 13.8 bar ) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19L ) Max. 12V power consumption: 14 amps Protection class: IP67 Max. Ambient temperature: +158°F (70°C) Min. ambient temperature: -40°F (4°C) Dimensions: 230 mm L x 101 mm W x 171 mm H Net weight: 3.8kg Hyper Grade (HG) compressors are specifically designed for filling air receivers and feature a head assembly with an innovative patented head design for better heat dissipation. All HG compressors are CE certified and have excellent sealing properties against the elements. In addition, all HG compressors are equipped with a separate stainless steel braided PTFE lined supply hose and check valve assembly.  Features: Thermal overload protection Vibration isolators Mounting hardware Heavy duty 1/4″ NPT check valve Stainless steel braided PTFE coated guide hose Air line for remote mounted air cleaner Remote mounted air filter assembly (2) Replacement air filter elements Assembly instructions Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Application noteFor further application information, please refer to the product data sheet

CONTINOUS DUTY, 485C CE-Compressor, 12V Specifications:   12-volt Permanent magnet motor Duty cycle: 100 % at 200 PSI (13.7 bar) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19 litres) Max. Power consumption: 23 Amps Protection class: IP67 Dimensions: 270 mm L x 105 mm W x 165 mm H Net weight: 4.99kg. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:Stainless steel valves guarantee long-lasting and optimised shut-off timesgenerously dimensioned cooling fins on design-optimised cylinders ensure maximum air dissipation and a longer service lifeAnodised cylinder running surfaces increase protection against abrasionthe piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life propertiesthe motors are protected against splash water and are therefore highly resistant to corrosionintegrated, automatic overheating protection protects the longevity of the compressorsCE labellingTechnical data:    2.5 gallons (approx. 9.5 litres) VIAIR air tank (200 PSI / 13.7 bar) 485C Stealth Black VIAIR compressor with thermal overload protection Digital tyre inflation gun with 180 PSI (12.4 bar) Braided black spiral hose with quick-release coupling 1/4’ NPT quick coupling bolt (F) 1/4’ NPT quick coupling (F) Dashboard indicator with ON / OFF switch Sealed pressure switch (165 PSI (11.3 bar) on, 200 PSI off (13.7 bar) Reducer 1/8‘ NPT (F) to 1/4’ NPT (M) Reducer 3/8‘ NPT (F) to 1/4’ NPT (M) 1/4’ NPT 250 PSI safety valve 1/4’ NPT drain cock (3) 1/4’ NPT compression fittings Suitable for tyres up to 37 inches 4-inch protective sleeves (grommet strips) for air line hoses - Make sure the air line hoses are protected from the sharp edges of the borehole with the supplied grommet strip.Please note: Use thread sealant for proper installation. Thread tape is not recommended. When properly sealed, the recommended torque for 1/8’ is 13.5 Nm. The recommended torque for 1/4‘ and 3/8’ is 22 Nm.  

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.

VIAIR Compressor Kit - CONSTANT DUTY Compressor system kit from VIAIR CONSTANT DUTY OBA version with compressor 450C delivery rate 51 L/ minute for 12Volt operating voltage incl. 9.5L tank and mounting kitTechnical data:     suitable for inflating tyres and operating small air tools or air horns    max. voltage: 13,8 Volt    max. 10 bar working pressure    max. current consumption: 23 amps    max. ambient temperature for operating the compressor: 70° Celsius    min. Ambient temperature for compressor operation: -40° Celsius    max. possible operating time e.g. at 22°C ambient temperature approx. 60 minutes    Protection class: IP67Exemplary filling times for the compressor system kit of VIAIR design CONSTANT:Air receiver with 10 litres : - 0 to 9.9 bar - 3 min. 02 sec. - 7.5 to 9.9 bar - 59 sec. Tyre size 35" x 12.50" :- 0 to 2.0 bar - 6 min 55 sec.- 1.0 to 2.0 bar - 3 min. 30 sec. Tyre size 37" x 12.50" : - 0 to 2.0 bar - 7 min 56 sec. - 1.0 to 2.0 bar - 4 min. 09 sec.Compressor system kit from VIAIR model CONSTANT has the following scope of delivery:1 x VIAIR 450C compressor 1 x 9,5 l air tank 1 x 10m air hose 1 x 1/4" quick coupling (F) 1 x 1/4" NPT connector (F) 1 x Control panel with on/off switch and pressure gauge 1 x Pressure switch with relay (7,2 - 10 bar) 1 x Reducer (1/8" NPT F to 1/4" NPT M)

Bicycle valve adapter for Sclaverand and Dunlop valves With this valve adapter, you can inflate your bicycle tires with a Sclaverand valve or Dunlop valve. The adapter is compatible with our VIAIR compressors. Scope of delivery: 1 pc. Valve adapter