Vehicle accessories

Complete set: jack with accessories Car jack Bundle consisting of jack, yellow transport protection and protective cover. You can choose the bundle with different jacks: JackAll Jack, 60 inches / 152 cm JackAll jack, 48 inches / 122 cm

Upholstery Kit for Land Rover Defender Td4 Retrim Kit for repairing a front seat on Land Rover Defender 90/110/130, incl. cover fabric, foam, spray adhesive and fitting instructions, cover fabric: Black Span - Mondus or Black Mesh. The repair kit for a front seat includes everything necessary for the renewal of the cover and upholstery (incl. spray adhesive). The Black Span - Mondus / Black Mesh cover fabric corresponds to the original fabric of the OEM seats.  Note: the headrest cover is not included in the scope of delivery.

Nakatanenga Aufstiegshilfe für Reserverad 2- oder 3-stufig "Oben ohne" ist es meist nichts beim Offroader. Egal wie viel du hinten, an der Seite, oder auf der Motorhaube montierst, es ist letztlich nie genug Platz. Die Dächer von Landy & Co sind deshalb begehrte Top-Lagen, die man auch baulich nutzen sollte: als Dachspeicher fürs Equipment oder auch als schickes Penthouse, wenn man zum Beispiel ein Dachzelte sein eigen nennt. Der sichere und bequeme Aufstieg ist dabei oft das Problem. Wo Heckleitern keinen Sinn machen oder nicht möglich sind, gibt es unsere zwei- oder dreistufigen Reserverad-Tritte als praktische Kletterhilfe. Die schwarz pulverbeschichteten Steighilfen mit HiGrip-Riffelblechtritten werden per Gurt mit NiRo-Ratsche fest und rutschsicher an alle gängigen Reserveräder gezurrt und das wahlweise links oder rechts. Reserverad-Cover müssen dabei abgenommen werden. Welche der beiden Tritt-Varianten ­– zweistufig fest oder dreistufig klappbar – sich am besten eignet, sollte man je nach Fahrzeughöhe, Beschaffenheit des Reserverad-Mounts und der eigenen Sportlichkeit entscheiden. Der klappbare Dreier-Tritt bringt die unterste Stufe der Steighilfe in den meisten Fällen deutlich unter Hüfthöhe, was den Dachzugang komfortabler und sicherer macht. Die Klappstufe zur Nachrüstung des Zweiertritts ist auch separat erhältlich und wird  mit dem mitgelieferten Rastbolzen befestigt. Für Reifen bis zu 37“ geeignet Bitte achten Sie auch auf den Zustand Ihrer Türscharniere!

Professionelle Montage für Reserveradträger Montagepauschale für den Hecktür-Reserveradträger NARRTDEF-02 in unserem Hause. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich. Hinweis zur Montagepauschale:   Die angegebene Montagepauschale gilt ausschließlich für Standardfahrzeuge ohne zusätzliches Zubehör oder Sonderumbauten. Bitte beachten Sie, dass bei Fahrzeugen mit zusätzlichen Einbauten – wie beispielsweise Zusatztanks, Sonderverkleidungen oder anderen Komponenten, die vor der Montage demontiert oder entleert werden müssen – ein erhöhter Montageaufwand entsteht.   In solchen Fällen kann die Montagepauschale abweichen. Sollte bei Ihrem Fahrzeug zusätzlicher Aufwand erforderlich sein, informieren wir Sie selbstverständlich vor Beginn der Arbeiten über mögliche Mehrkosten.  

Robust tank protection for your Land Rover Defender The tank protection plate for the Land Rover Defender 90/110/130 of the Td5 and Td4 series (2.4 and 2.2) protects the entire width of the tank from dents, damage and leaks during off-road use. This prevents vehicle downtime and costly environmental damage.   The tank protection plate can be used in conjunction with standard trailer couplings. It is made of weight-optimised, 6 mm thick, anodised aluminium.   Please select your vehicle type below.      

Heritage style headlight surrounds aluminium - silver Matching to our silver Heritage grille: Silver headlight plates with inlet gills and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, silver powder coated 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130.

Heritage style aluminium headlight surrounds - black Matching to our black Heritage grille: Black headlight plates with inlets and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, black powder coated Select the colour of the headlight rings. 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130. You can find the heritage-style headlight surround in silver here.

Headlight surrounds Heritage Style aluminium Heritage Style - silver Matching to our silver Heritage grille: Silver headlight plates with inlets and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, silver powder coated Select the colour of the headlight rings. 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130. You can find the heritage-style headlight surround in black here.

Large differential protection with slip plate for the Salisbury rear axle of the Land Rover Defender 110/130 to MY02 Only a few components are as exposed in an off-roader as the differentials of the front and rear axles. Quick damage to a stone caused a costly damage, which usually can not be repaired on site and thus means the end of the ride. What is annoying in the home offroad park can quickly become dangerous in more remote regions of the world. Therefore, we have designed corresponding protective devices for the various axles of the Land Rover Defender, which protect the lids of the differentials from damage and in some cases also facilitate easier gliding over the obstacle.Black galvanized, delivery including the required mounting material.

Heritage-style headlight surrounds in black aluminium Matching to our black Heritage grille:Black headlight plates with inlet gills and silver OR black powder coated headlight rings.The plates are manufactured EXCLUSIVELY for us and UNIQUE in their looks! Material: high-strength aluminium, black powder coated 1 pair plates with headlight rings and stainless steel mounting kit for every Land Rover Defender 90, 110 or 130.

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! The VIAIR 300P SXS Edition is based on the tried-and-tested, popular VIAIR 300P, but has been specially enhanced for use on side-by-side vehicles, ATVs, UTVs and quads. With additional features such as 2-pin SAE connectors, matching connection accessories and a customised carry bag, this set is particularly practical for off-road, leisure and work applications away from tarmac roads. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

Professionelle Montage für Ladeluftkühler Pauschale für denb Einbau des größeren Ladeluftkühlers für LandRover Defender 90/110/130 Td4 und Td5. Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben.Bitte wählen Sie aus, ob ihr Fahrzeug über eine Klimaanlage verfügt oder nicht und geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.

Nakatanenga adapter for hitch-mounted racks for bikes and other sports gear Hitch-mounted racks for bikes and other sports gear are fantastic, if you are using your bikes only off and on or once a year on your annual holiday trip. No cumbersome attachment to the roof rails or the trunk needed: simply lock it onto your car’s standard ball hitch when you need to and hey presto off you go. Theoretically, that is, because for most 4x4 owners, the rear-mounted spare wheel will usually be in the way of a regular hitch-mounted bike rack. But that’s where Nakatanenga comes in.Our premium quick-release adapter extends your existing ball hitch by 25 cm, enough to reach beyond most spare wheels. The adapter locks onto the ball hitch quickly, securely and can also be padlocked. We advise to take careful measurements before ordering, so that you can be sure the 25 cm extension is sufficient for your individual set-up. Please also verify that you have enough space for the quick-release locking handle on the right side of the hitch. Your existing trailer hitch has to clear any obstructions like bumper indentations or the like for the handle to be operational. Don’t hesitate to get in touch if you need more information.With a maximum load of 120 kg, the hitch-mounted adapter is ideal for standard bike racks, cargo carriers, tubs, baskets etc. Since we sometimes receive enquiries regarding the validity of the maximum load, we would like to emphasize – as the manufacturer – that the specified load applies to the entire adapter and has been thoroughly tested and evaluated for stability and road safety. Separately available single components may differ in their capacity, this however does not affect the maximum load of the adapter as a unit. Please check the individual road safety regulations and legal requirements for your country when mounting the adapter.CAUTION!For technical and legal reasons, the use of the adapter with a trailer is PROHIBITED.

Extended wheelarches for Land Rover Defender Often the fender flares are too narrow for the Defender. With this widening you get a wheel cover of + 30 mm. This extended wheelarches for Defender is made of a very flexible material, which allows easy and quick attachment to the wheel arch. The 30 mm widening & increase is also great for wider tires. Even a trackless dismantling is possible without further ado. suitable for Land Rover Defender until MY2016 incl. plastic expanding rivets NOTE: You will need a piece (white, dashed mark) of your old widening (picture 1) on the front axle to attach this fender widening. You can see a detailed marking for the cutting on picture 2 and picture 3. On picture 4 you will find the final result as well as the position at which point a further manual drilling is necessary. Finished!

Electric kit for trailer coupling 13-pin E-kit with multi-plugE-testedsuitable for all Defender from MY99 up to and including Td4

Double DIN Console for TD5, 2002-2007 The MUD Td5 Double DIN Console replaces the factory 2002-2007 Td5 Defender radio bezel with this exclusive, one-piece design that allows you to easily upgrade the original single DIN radio setup to a double DIN head unit. The original Land Rover radio bezel installed in the 2002-2007 Td5 Defender is a fragile unit that can break thanks to a flimsy and poorly designed two-piece assembly that can barely support the weight of the single-DIN head unit. Typically, the separate center panel that contains the head unit/radio breaks off the main console. The MUD Td5 Double DIN Console is a simple DIY upgrade that uses the factory fasteners and requires no cutting, drilling or modification to your dash. Simply remove your old console, replace it with the MUD Double DIN Console, and enjoy the benefits and features of the larger screens found on modern double DIN head units, such as Apple CarPlay & Android Auto screen mirroring. The MUD Td5 double DIN console was designed using CAD 3D scanning technology and uses an injection molding manufacturing process for a factory fit appearance and a perfect fit every time. Available in Matte Black

Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light

The new Oberland Arms Alu SEPP - two-handed knife The aluminium SEPP, created by renowned Italian designer Tommaso Rumici, has long since become a modern classic.The latest generation is now being produced by premium manufacturer Lionsteel in Maniago, Italy - with high-precision technology and the expertise of experienced craftsmen. The special feature: an integral handle milled from solid aluminium that meets the highest standards of design, ergonomics and workmanship.This puts the new Alu SEPP in the absolute top class - uncompromising in terms of quality, function and aesthetics.The scope of delivery includes a MOLLE-compatible knife pouch made of robust nylon, colour-matched to the knife and manufactured using a precise laser-cut process. Manufactured in Germany, the pouch is also ideal as a magazine pouch or for other tactical equipment.Technical details:   Blade length: 95mm/3.5mm   Steel: M390 stonewashed / black PVD   Handle material: Aluminium 7075 black or green hard anodised 7075  Weight: 133g   Concept/Initial design: Matthias Hainich   Design: Tommaso Rumici   Production: Lionsteel, Maniago Italy   Accessories: incl. Molle compatible knife pouch made of nylon, manufactured by Tactical Baer in Germany   All Titan Sepp knives come with QR code with the BKA notification discreetly engraved on the handle (at no extra charge)   All knives are provided with a consecutive serial number The knives are not subject to the weapons prohibition under §42a Weapons Act, because they are not one-handed knives. You can find the corresponding notice of determination from the BKA above under Downloads! At explicitly designated weapons prohibition zones, the knives, just like any other knife, may not be carried.

Chequer plate for bonnet incl. rivets for Defender up to MY07, black powder coatedIllustration symbolicMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)

Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.  

TREKFINDER underride guard for SUZUKI Jimny II type GJ BJ 2018 front axle suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all Vorderachsausführungen made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

Abenteuer4x4 - Recovery eye rear cross member Land Rover The recovery eye / towing eye from Abenteuer 4x4 has a 360° rotatable shackle pin made of stainless steel. The basic construction made of aluminium and stainless steel is screwed to the original mountings of the rear cross bar of the Land Rover Defender. In addition, a step with pulled knobs is integrated for easy access to the roof rack.Scope of delivery:    Spacer plate (10 mm aluminium, black powder-coated)    Carrier plate 1 with step (3 mm stainless steel, black powder-coated)    Carrier plate 2 (3 mm stainless steel, black powder-coated)    4 x 12 mm hexagon socket screw (stainless steel)    2 x 16 mm hexagon socket screw (stainless steel)    Bow shackle with 13 ton breaking load

Cargo net incl. fixing material, Suzuki Jimny II The smaller the car, the bigger the challenge to make the best use of available space inside. Our cargo mesh for the Suzuki Jimny II (from MY2018) will generate a lot of storage room in a place that’s rarely used: under the roof in the cargo bay.To attach the 93 x 60 cm netting to the roof trim, all you need to do is mount two aluminum frame elements in the front and the back. They are the same color as the mesh for a seamless look. The elastic cargo mesh can then be attached to the frame and the interior grab handles with 12 adjustable straps. To make it easier for you to fill the mesh space, there are also two click buckles in the front for easy access.Light and flat pieces of equipment, sleeping bags, textiles and the like will find the perfect storage space inside the mesh, even in a fully loaded Jimny.If you do not have handles on the headlining, 2 ring nuts are supplied to attach the net. Additionally, you can thread an elastic string in a zigzag shape on the underside of the netting for all those lighter items you want quick access to: light blankets, towels, swimming or sports gear etc.The cargo mesh comes in the colors black, gray and coyote. Please note: When ordering, please be sure to state in which model (GJ or HJ) you would like to install the Cargo Net, and also whether you have an interior light (Comfort Plus equipment) in the GJ model. Pictures may vary.

Console for headliner - for Defender 90/110/130 This roof console for the Land Rover Defender (90/110/130) brings some desperately needed storage space to the cabin of the vehicle. The console has not only a large storage compartment but also a DIN slot allowing for a radio or switches to be mounted. We recommend our own Nakatanenga switch bundle, for easy installation  Remarks: Easy installation by simply following the integrated manual  Comes with the necessary hardware Rear-view mirror remains at the same spot This consol is not suitable for soft-tops The Sun visors need to be shortened The original dome light can be detatched and mounted inside the console. In the rear of the console a second OEM dome light can be mounted or some more switches. By upgrading to a second doemlight now even the read seats get some light. The Rear view mirror can be mounted just where it was before. The console is available in truckcab/ singlecab for all vehicles produced from 03/2013 or all other Stationwagons and doublecabs. Please select.

Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all rear axle versions made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

Scheelmann folding console for Land Rover Defender The Scheelmann seat console is suitable for all Land Rover Defender 90/110/130 series Td4, Td5 and Tdi. It can be used for the passenger or driver side of the vehicle and is foldable to allow easy access to the battery. It also serves as a seat rail extension. A TÜV certificate (in conjunction with a Scheelmann seat) is included.Scope of delivery:    one console    running rails    fixing material    TÜV certificate

Nakatanenga cable set winch mounting in Defender In order to facilitate the installation of the winch in the Defender and to minimise sources of error, we have a complete cable set for this purpose mass-produced by a cable harness manufacturer. The cable lengths are adapted to the installation situation in the Land Rover Defender 90/110/130. Due to the cable cross-section of 50 mm², even high currents can be transmitted safely, so that enough current reaches the cable winch and is not converted into heat in the cable. Delivery includes tubular cable lug M10 and battery pole clamp minus M10, for mounting on the vehicle's wiring.

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90 or the version with a 4-way adjustable headrest! The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

TLC PLUS Automatic Portable Compresso Viair Part No. 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance ultra compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. The TLC series is designed not only for off-road riders but also for cyclists. Thanks to the valve adapters supplied and the small integrated pressure reservoirs on the compressors, it is particularly well suited for fitting tubeless bicycle tyres. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering.  

Universal base carrier and expandable platform for the spare wheel. The high school of storage space optimization actually only begins when all the obvious places like the interior or trunk or the roof have long since ceased to offer anything. With our practical and universally applicable spare wheel tray, even the fifth wheel on the car becomes an equipment carrier.The practical storage solution for the spare wheel at the rear consists of two components that can be ordered individually or as a set (here in the store). The base carrier with the tensioning strap is adjustable and thus fits all common off-road tire sizes. If one mounts only the basic carrier (sideways), so e.g. starting aids, wheel chocks and other accessories can be screwed to the carrier or fastened with straps. If you want to mount the tray, i.e. the basket, the base carrier must be on top of the wheel. The loading area of the storage basket is a generous 80cm x 38cm, so that even larger equipment can find its place here. If this area is not enough, you can also turn the platform around and attach with the edge down. Raised edges and circumferential lashing holes ensure problem-free load security.Base carrier and storage basket are black powder-coated, so that the look of the spare wheel tray harmonizes perfectly with any off-roader. Base carrier: approx. W 38.8cm x D 20cm x H 15.5cmLoading area: approx. W 80cm x D 38cm x H 5cm Note: Distribute the load centrally or evenly on the platform. Pay attention to the condition of your door hinges when loading the platform! It is extremely important to secure the strap as tightly as possible in a locked position so you do not lose your equipment. We are NOT responsible for the use or misuse of the racks and damaged vehicles or lost items due to improper assembly and inspection of the load prior to travel.

Large differential guard with skid plate and hardware for the P38 rear axle of a Land Rover Defender 110/130 from the model year 2002 From the model year, 2010 on two holes need to be drilled. Not many parts on any 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.

Organize Your Defender Dashboard The padded upper dashboard rail of the Land Rover Defender is an outdated relic of the past. Finding clean, undamaged original parts is nearly impossible. Our high-quality reproduction provides the perfect solution to refresh one of the most worn areas of the Defender cockpit – ideal for restoration projects! Premium Finish at OE Level Our Defender Top Rail is delivered as a ready-to-install panel, professionally trimmed by a leading UK Tier-1 automotive supplier. The result: an original equipment-level finish that meets the highest standards. This upper dashboard rail is a faithful reproduction of the "Pad-Facia Crash Assembly", originally fitted in Land Rover Defender models from 1983 to 2006. Perfect Fit for Your Vehicle Matches Land Rover part number MXC6084PMADesigned for the "wide" windshield vent version from VIN (V)HA455946 onwardAvailable in durable ABS plastic or with a high-quality vinyl trim Upgrade your Defender’s interior with a flawless finish – restore and refine your dashboard today!