€149.00
Prices incl. VAT; / Parcel shipping
↪️ Spurverbreiterungen Ineos Grenadier ✔️ 66 mm pro Achse ✔️ schwarz eloxiert ✔️ Aluminium ✔️ mit TÜV-Teilegutachten
Delivery time 5-10 working days
Description
TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres
Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels.
The following vehicles are approved according to the TÜV parts certificate:
Vehicle manufacturer: Ineos Automotive (UK) / 2295
Vehicle type: GN, GM
Commercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seater
EC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*...
The following wheel/tyre combinations are approved according to the TÜV parts certificate:
265/70R17 with 7.5x17
255/70R18 with 8.0x18
Scope of delivery:
Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised
1 set of fixing nuts
1 set of fitting and care instructions
1 TÜV parts certificate
Notes on installation:
The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).
Ensure that the stud bolts are long enough.
The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.
The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained.
Wheel cover requirements:
Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.
The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel.
Notes on the modification measure:
There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met:
- Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.
- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.
- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.
TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres
Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels.
The following vehicles are approved according to the TÜV parts certificate:
Vehicle manufacturer: Ineos Automotive (UK) / 2295
Vehicle type: GN, GM
Commercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seater
EC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*...
The following wheel/tyre combinations are approved according to the TÜV parts certificate:
265/70R17 with 7.5x17
255/70R18 with 8.0x18
Scope of delivery:
Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised
1 set of fixing nuts
1 set of fitting and care instructions
1 TÜV parts certificate
Notes on installation:
The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).
Ensure that the stud bolts are long enough.
The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.
The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained.
Wheel cover requirements:
Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.
The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel.
Notes on the modification measure:
There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met:
- Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.
- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.
- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.
Otto-Heilmann-Str. 18 A
82031 Grünwald
Deutschland / Germany
E-Mail / Email: dialog@trekfinder.de
Customers also bought
Sun visor organizer for Ineos Grenadier With its classic boxy design – inspired by the old Defender, of course – the Ineos Grenadier is as spacious as can be. And there’s the catch, because it is very easy to lose track of all your small and important things in the Grenadier’s huge cockpit. But now there’s an easy solution available: our practical organizer for the sun visor features a spacious zipper pocket, MOLLE and Velcro patches. All your essential vehicle documents, parking licenses, keys, pens, sunglasses and other small paraphernalia can be kept within easy reach at all times, without restricting your forward vision or driving attention in any way. Four sturdy Velcro straps guarantee a tight fit on the sun visor, even in rugged off-road terrain. The organizer is made of PU coated nylon 6.6 fabric and therefore extremely durable and easy to clean. Available in black Dimensions:on the sun visor: 46.5 cm x 16.5 cmopen: 46.5 cm x 33 cm Each organizer has to be ordered separately.
Prices incl. VAT;
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate
Prices incl. VAT;
Nakatanenga CargoBear for Ineos Grenadier The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static). All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change. In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions: As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel. As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel. There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows. As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters. As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier. Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition! The Trier Fire Brigade also relies on our quality – equipment that meets the highest standards! Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black) MADE IN GERMANY
Prices incl. VAT;
Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.
Prices incl. VAT;
Secure hold on rock sliders – especially for Defender & Grenadier These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.
Prices incl. VAT;
Some nights stretch so deep into darkness that the standard main beam eventually just runs out. On a gravel track in Lapland or a desert stage in Morocco, it always ends the same way: the beam fades into nothing, and the next bend stays invisible. This is where the Vision X CG2 CPZ110 Light Cannon really show what they can do, because these single-LED driving lights for the Ineos Grenadier with ECE R112 approval are built for exactly those moments when range matters more than a wide beam. The beam of the Vision X auxiliary driving lights for the Grenadier Each lamp holds a single Luminous Big Chip LED with 40 watts, and the iris reflector from Vision X focuses the light so sharply that, according to the manufacturer, it reaches up to 340 metres. As a pair, the lamps draw 80 watts in total at a colour temperature of 6,000 Kelvin, which gives the light a clear, neutral-white character. Anyone looking for width rather than distance should take a look at the multi-LED sibling, the Vision X CG2 CPM710. Clear or yellow lens? The Vision X CG2 CPZ110 is also available with either a clear or a selective yellow lens. The clear lens delivers the maximum range and is the standard choice for clear nights. The yellow version is made for the days when something is hanging in the air, such as dust on a desert track, mist in the mountains, driven snow on a pass, or heavy rain in the forest. Yellow light scatters less on particles in the air and therefore does not build the blinding wall in front of the bonnet that clear light can throw up when visibility drops. Housing waterproof and tough The housing of the CG2 CPZ110K is a hybrid of aluminium and polycarbonate, tough yet not too heavy for the grille. The lens is made of acrylic, and together the lamps are IP68 waterproof and IP69K pressure-washer tested, withstand 21.2 Grms of vibration, and operate between minus 40 and plus 80 degrees Celsius. The LEDs are also rated for around 50,000 hours. Fitment in the grille, no drilling Vision X developed this kit specifically for the Ineos Grenadier and tested it on the vehicle in Europe. The lamps sit neatly in the grille with the supplied brackets, with no drilling or cutting required, so parking sensors and driver assistance systems stay fully functional. The plug-and-play wiring loom brings everything needed, including relay, fuses, and a CAN-bus connection, so the driving lights switch on automatically or manually together with the main beam. Anyone who wants to revert to the original setup can do so at any time. Technical specification Part number: GRE-CG2-CPZ110KITM Manufacturer: Vision X LED type: 1 × 40 W single-source Luminous Big Chip LED Reflector: iris reflector technology Power: 2 × 40 W (80 W as a pair) Luminous flux: 2 × 3,000 lumens (raw lumens at the LED), 2 × 2,100 lumens effective after optics Range: up to 340 m Beam type: single-LED spot (10°) Colour temperature: 6,000 K Lens: acrylic, clear or selective yellow Input voltage: 9 to 32 V DC Current draw: 3.33 A per lamp at 12 V (6.67 A as a pair) Dimensions: 137.6 × 134 × 94 mm Weight: 1.3 kg per lamp Housing: hybrid (aluminium and polycarbonate) Protection rating: IP68 waterproof, IP69K pressure-washer tested Vibration rating: 21.2 Grms Operating temperature: −40 °C to +80 °C Lifespan: around 50,000 hours Certifications: CE, RoHS, IEC 62471, ECE R112 (driving lamp) Connector: Deutsch connector, weatherproof Package contents: 2 driving lamps with wiring loom
Prices incl. VAT;
Standard main beam headlights do the job as long as the road runs straight to the supermarket. Once the tarmac ends, everything left and right of the track goes dark fast. And from that point on, the terrain tends to keep surprises ready, for example a deer that doesn't see the off-roader coming, or a road edge that suddenly drops away into a deep ditch. The Vision X CG2 CPM710 Light Cannon make those surprises visible: multi-LED driving lights for the Ineos Grenadier, built for short and medium range. The beam of the Vision X auxiliary driving lights for the Grenadier Each lamp holds seven LEDs of 7 watts each, every one with its own 10° optic, and together they produce a wide driving beam. That works out to 49 watts per lamp, so 98 watts as a pair. Colour temperature sits at 6,000 Kelvin, which gives the light a clear, neutral-white character. Anyone looking for range rather than width should take a look at the single-LED sibling, the Vision X CG2 CPZ110. Clear or yellow lens? The Vision X auxiliary driving lights for the Grenadier come with either a clear or a selective yellow lens. Clear delivers the full light output and is the standard choice for clear nights. The yellow version is built for the days when something is hanging in the air, like dust on a desert track, mist in the mountains, driven snow on a pass, or heavy rain in the forest. Yellow light scatters less on particles in the air and therefore does not build the blinding wall in front of the bonnet that clear light can throw up when visibility drops. Housing waterproof and tough The housing of the CG2 CPM710 is a hybrid of aluminium and polycarbonate, tough enough for stone chips and light enough for the grille. The lens is acrylic, and together the lamps are IP68 waterproof and IP69K pressure-washer tested, stand up to 21.2 Grms of vibration, and operate between minus 40 and plus 80 degrees Celsius. The LEDs are rated for around 50,000 hours. Fitment in the grille, no drilling Vision X developed this kit specifically for the Ineos Grenadier and tested it on the vehicle in Europe. The lamps sit neatly in the grille with the supplied brackets, with no drilling or cutting required, so parking sensors and driver assistance systems stay fully functional. The plug-and-play wiring loom brings everything needed, including relay, fuses, and a CAN-bus connection, so the driving lights switch on automatically or manually together with the main beam. Anyone who wants to revert to the original setup can do so at any time. Technical specification Dimensions (L × W × H): 14.5 cm × 9.4 cm × 13.4 cm Manufacturer: Vision X LED type: 7 × 7 W LEDs, each with 10° optic (multi-LED) Power: 2 × 49 W (98 W as a pair) Luminous flux: 10,500 lumens total Range: approx. 215 m Beam type: wide driving beam Colour temperature: 6,000 K Lens: acrylic, clear or selective yellow Input voltage: 9 to 32 V DC Current draw: 4.08 A per lamp at 12 V (8.17 A as a pair), 2.04 A at 24 V Weight: 1.3 kg per lamp Housing: hybrid (aluminium and polycarbonate) Protection rating: IP68 waterproof, IP69K pressure-washer tested Vibration rating: 21.2 Grms Operating temperature: −40 °C to +80 °C Lifespan: around 50,000 hours Certifications: CE, RoHS, IEC 62471, ECE R112 (driving lamp) Connector: Deutsch connector In the box: 2 driving lights with connection cable
Prices incl. VAT;
Premium off-road tyres Radar Renegade A/T AT5 265/65 R18 114H Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained from motorsport, countless victories in the Lucas Oil races and the TORC championships, flows into the production of these premium tyres.Off-road tyres for the whole Big Radar Renegade A/T AT5 265/65 R18 114H is a popular all-terrain tyre in a class of its own. Whether on sandy, rocky or muddy roads, or completely off-road, the tread pattern and durable compound of this model allow the Radar Renegade A/T AT5 265/65 R18 114H to be used as an on-road tyre but also off-road. Performance: 30% off-road - 70% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: H M+S marking: yes Weight: 19,07kg per tyre Tyre type: Summer Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): E Fuel efficiency (A to G): E Tread Name: Renegade A/T AT5 When ordering, please let us know if the white lettering is to be fitted inside or outside. BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Ventilation plates rear side windows - Ineos Grenadier The INEOS Grenadier stands for uncompromising off-road capability and robustness. Good air circulation, as with slightly open windows, but without the increased risk of rainwater ingress or theft? Plus effective insect protection? That's exactly what our ventilation panels with mosquito netting offer, precision-manufactured for the Grenadier from high-quality aluminium — no rattling universal parts. Supplied in pairs, powder-coated in black and visually unobtrusive, they are ideal for expeditions, camping and tough use. Installation: wind down the windows, insert the panels, wind up the windows. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it's securely in place without rattling. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.
Prices incl. VAT;
BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design. With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18, 255/70R18; 265/65R18; A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: rim 16 inch, incl. matching wheel nuts Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!
Prices incl. VAT;
Ready for winter: Complete wheel set with Weathermaster WSC on sturdy Borbet CW7 rims BF Goodrich All Terrain T/A KO2 275/55R20 – The classic for road and off-road use Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18" Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel 18 Zoll: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Complete wheel set BF Goodrich 265/65R18 117R All Terrain T/A KO2 on Borbet CW7 alloy wheels BFGoodrich ALL Terrain T/A KO2 265/65 R18 117R: The BFGoodrich All Terrain T/A KO2 265/65 R18 117R guarantees driving fun even off the paved roads. It is very stable and has good road grip. It also handles not too difficult terrain with some mud, loose ground well. For extreme terrain and little road use, however, a MUS tyre is recommended. In the AT range BFGoodrich is a very good choice. A SPECIAL TYRE MIXTURE that is resistant to cuts and chipping on the sidewalls to withstand sharp stones. Designed to resist chipping and cracking caused by sharp stones and obstacles in the terrain. IMPRINTED CLAMPS on the sides for more grip and better sidewall protection. The large crampons on the sidewall are synonymous with bite, especially when the tyre is rolling at low pressure. Greater thickness of rubber on the sidewall protects the tyre from off-road hazards. STRENGTHENED CABLES for less sensitive sidewalls. Flank weakness can spoil off-road activities very quickly. Oversized sidewall cables give the carcass the protection it needs for tough off-road use. Performance 50% off-road - 50% on-road Tyre width 265 Ratio of sidewall height to tyre width in percent 65 Rim diameter: 18" Load index: 117/114 Speed index: R 3PMSF Alpine symbol (so-called snowflake): yes M+S marking: yes Weight: 23,06 per tyre Tyre type: All-season Tyre type: Radial Noise emission: 74db Noise class (from 1-quiet to 3-noise): 2 Wet grip (grip on rain-soaked road): B Fuel efficiency (A to G): F When ordering, please let us know whether the white lettering is to be fitted inside or outside.BORBET CW7 alloy wheels 18 inch:With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;
Radar Renegade R/T+ – Off-road tyres in a class of their own Premium off-road tyres Radar Renegade R/T+ 265/65 R18 117Q: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained in motorsport, countless victories in Lucas Oil races and TORC championships, flows into the production of these premium tyres.Off-road tyres for all the greatsRadar Renegade R/T+ 265/65 R18 117/114Q is a popular MUD Terrain tyre in a class of its own. Whether on sandy, rocky or muddy trails, or completely off-road. Also and especially recommended for racing. The tread design and the durable compound of the model Radar Renegade R/T+ 265/65 R18 117/114Q is especially suitable for off-road, SUV's and all 4x4 vehicles. Performance: 60% off-road - 40% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 117 Speed index: Q M+S marking: yes POR marking: yes 3PMSF / snowflake symbol: no Weight: 22.94 kg per tyre Tyre construction: Radial Tread name: Renegade R/T+ PLEASE NOTE: This tire carries a P.O.R. marking (“Professional Off Road”). It does not feature a 3PMSF (Three Peak Mountain Snowflake) symbol and is therefore not approved for use in winter road conditions (according to §2 paragraph 3a sentence 1 and 2 of the StVO). We recommend the use of winter tyres in appropriate weather conditions. We will be happy to advise you on this. BORBET CW7 alloy wheel: The BORBET CW7 in the ‘Commercial Wheels’ category is a new wheel that impresses not only in terms of design, but also with high wheel loads of up to 1,400 kg. The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also perfect for the real movers and shakers among vehicles. From vans and off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", ET 47 Colour: choice of matt black or matt bronze Suitability: for Ineos Grenadier Certificate: for 255/65R18 255/70R18 265/65R18 A01) K02) Scope of delivery: rim, incl. matching wheel nuts High wheel load Winter-proof Scope of delivery: rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels, including fitting and balancing. This item is classified as bulky goods.
Prices incl. VAT;
Pirelli Scorpion A/T+ – All-terrain tyre with snowflake symbol Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T: Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges. Performance: 40% off-road - 60% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18" Load index: 114 Speed index: T 3PMSF Alpine symbol (so-called snowflake): yes Tyre type: All-season Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): D Fuel efficiency (A to G): D Weight: 18.72kg Tread Name: Scorpion A/T+ BORBET CW7 alloy wheel 18 inch: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18" offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.
Prices incl. VAT;