ClimAir wind deflector for Ineos Grenadier, front Off-road vehicles are not designed for aerodynamics and turbulent air flows, of course. This is seldom noticeable when driving, because you don't usually reach the corresponding speed ranges. However, there is one aspect in which the Defender's rustic box shape very quickly reveals annoying disadvantages, and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the Landy's ventilation is weak and the windows mist up, you'll be glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the interior of the car. This annoys even hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the Defender provide an immediate remedy and guarantee an improved supply of fresh air and a pleasant interior climate in all seasons. The screens made of moulded acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when travelling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke grey and black and are supplied with a general operating permit (ABE). Fitting is a matter of minutes with the enclosed instructions. The wind deflectors are available in pairs for front or rear doors and must be ordered separately. Suitable for:INEOSGRENADIER off-road vehicle, (2022 -) off-road vehicle closed, 5 doorsGRENADIER panel van/off-road vehicle, (2022 -) panel van/off-road vehicle closed, 5 doorsGRENADIER Quartermaster, (2023 -) Pickup, 5 doorsGRENADIER Quartermaster, (2023 -) Flatbed/chassis, 5 doors  

TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels. The following vehicles are approved according to the TÜV parts certificate: Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*... The following wheel/tyre combinations are approved according to the TÜV parts certificate: 265/70R17 with 7.5x17255/70R18 with 8.0x18 Scope of delivery: Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained. Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel. Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met: - Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.  

Nakatanenga CargoBear for Ineos Grenadier The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static). All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change. In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions: As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel. As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel. There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows. As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters. As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier. Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition! Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black) MADE IN GERMANY

Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Complete wheelset Radar Renegade A/T-5 All Terrain 265/65R18 114H on Borbet CW7 alloy wheels Premium off-road tyres Radar Renegade A/T AT5 265/65 R18 114H: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained from motorsport, countless victories in the Lucas Oil races and the TORC championships, flows into the production of these premium tyres.Off-road tyres for the whole Big Radar Renegade A/T AT5 265/65 R18 114H is a popular all-terrain tyre in a class of its own. Whether on sandy, rocky or muddy roads, or completely off-road, the tread pattern and durable compound of this model allow the Radar Renegade A/T AT5 265/65 R18 114H to be used as an on-road tyre but also off-road. Performance: 30% off-road - 70% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 114 Speed index: H M+S marking: yes Weight: 19,07kg per tyre Tyre type: Summer Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): E Fuel efficiency (A to G): E Tread Name: Renegade A/T AT5 When ordering, please let us know if the white lettering is to be fitted inside or outside. BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Complete wheelset Pirelli Scorpion A/T plus All Terrain 265/65R18 114T on Borbet CW7 alloy wheels Premium off-road tyre Pirelli Scorpion A/T+ 265/65 R18 114T: Did you know that traditional brands like Pirelli also have off-road tyres in their range? Then you can rely on well-known virtues and get the highest quality for your off-road heart.An off-road tyre with a snowflake - extremely rare but actually true: the Pirelli Scorpion A/T+ 265/65 R18 114T is like a wish come true from the All Terrain Christmas list. Whether on sandy, rocky or muddy trails, or completely off-road, and even in ice and snow. With their distinctive tread pattern, these tyres are a guarantee of exceptional grip and traction on a wide range of road conditions. The Pirelli Scorpion A/T+ 265/65 R18 114T is particularly suitable for off-road, SUV's and all 4x4 vehicles, and thanks to 3PMSF certification it can be officially driven as a winter tyre. Tradition obliges. Performance: 40% off-road - 60% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 114 Speed index: T 3PMSF Alpine symbol (so-called snowflake): yes Tyre type: All-season Tyre type: Radial Noise emission: 73db Noise class (from 1-quiet to 3-noise): B Wet grip (grip on rain-soaked road): D Fuel efficiency (A to G): D Weight: 18.72kg Tread Name: Scorpion A/T+ BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rim, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

Complete wheelset Radar Renegade R/T + Mud Terrain 265/65R18 117Q on Borbet CW7 alloy wheels Premium off-road tyres Radar Renegade R/T+ 265/65 R18 117Q: Off-road specialists Radar have been manufacturing premium off-road tyres since 2006. The experience gained in motorsport, countless victories in Lucas Oil races and TORC championships, flows into the production of these premium tyres.Off-road tyres for all the greatsRadar Renegade R/T+ 265/65 R18 117/114Q is a popular MUD Terrain tyre in a class of its own. Whether on sandy, rocky or muddy trails, or completely off-road. Also and especially recommended for racing. The tread design and the durable compound of the model Radar Renegade R/T+ 265/65 R18 117/114Q is especially suitable for off-road, SUV's and all 4x4 vehicles. Performance: 60% off-road - 40% on-road Tyre width: 265 Ratio of sidewall height to tyre width: 65%. Rim diameter: 18 Load index: 117 Speed index: Q M+S marking: yes Weight: 22.94 per tyre Tyre type: Radial Tread Name: Renegade R/T+ PLEASE NOTE: This tyre is P.O.R. marked ("PROFESSIONAL OFF ROAD").The tyre does not have an M+S marking. It is therefore not approved for use in winter road conditions (according to §2 paragraph 3a sentence 1 and 2 of the StVO). We recommend the use of winter tyres in appropriate weather conditions. We will be happy to advise you on this. BORBET CW7 Leichtmetallfelge: Mit dem BORBET CW7 der Kategorie „Commercial Wheels“ präsentiert sich jetzt ein neues Rad, das nicht nur in puncto Design, sondern auch bei hohen Radlasten von bis zu 1.400 kg überzeugt.Das CW7 steht für eine neue prägnante Optik, die sich eben nicht nur über die Anzahl der Speichen definiert, sondern wie geschaffen ist für die echten Macher unter den Fahrzeugen. Vom Transporter über den Offroader bis zum Wohnmobil. Hersteller: Borbet Marke: CW7 Größe/Einpresstiefe: 7,5x18", ET 47 Farbe: wahlweise matt Schwarz oder matt Bronze Eignung: für Ineos Grenadier Gutachten: für 255/65R18 255/70R18 265/65R18 A01) K02) Lieferumfang: Felge, inkl. passende Radmuttern Hohe Radlast winterfest Lieferumfang: Felge, inkl. passende Radmuttern / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! Der Preis bezieht sich auf 4 bzw. 5 Kompletträder inkl. Montage und Wuchten. Bei diesem Artikel handelt es sich um Sperrgut.

Complete wheel set, Weathermaster WSC 265/65R18 114T on Borbet CW7 alloy wheels Weathermaster WSC 265/65R18 114T : High silica, low modulus tread compound for excellent grip on ice, "Snow Groove" technology improves snow-on-ice grip. Increased number of "sharp" edges for even more grip.An advanced directional tread pattern for better grip with less noise, with siped tread blocks to improve grip and braking in extreme winter weather and road conditions.Improved tread compound: For better braking performance on wet roads and ice. Tyre Series: WeatherMaster WSC Fuel efficiency: C (A to E) Wet grip: C (A to E) External rolling noise: 74dB Vehicle type: 4x4/SUV Tread pattern: directional Tyre marking: Alpine symbol (3PMSF), M+S marking Tyre width: 265mm Height/width ratio: 65 Rim diameter: R18 Load index: 114 (max. load per tyre 1180kg) Speed index: T (max. speed 190km/h) Special features: studdable BORBET CW7 alloy wheel: With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real man in the street. Manufacturer: Borbet Brand: CW7 Size/offset: 7,5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: Rims, incl. matching wheel nuts / Note: the wheel nuts of the original Ineos alloy rims also fit on these rims! The price refers to 4 or 5 complete wheels incl. mounting and balancing. This article is bulky goods.

BORBET demonstrates a seventh sense for high wheel loads with the new CW7 design. With the BORBET CW7 in the "Commercial Wheels" category, a new wheel is now presented that is not only convincing in terms of design, but also with high wheel loads of up to 1,400 kg.The CW7 stands for a new, striking look that is not only defined by the number of spokes, but is also made for the real movers and shakers among vehicles. From vans to off-roaders to motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", offset 47 Colour: either matt black or matt bronze Suitability: for Ineos Grenadier Certification: for 255/65R18 255/70R18 265/65R18 A01) K02) Included in delivery: Rim, incl. matching wheel nuts High wheel load Winterproof Scope of delivery: rim, incl. matching wheel nuts Note: the wheel nuts of the original Ineos alloy rims also fit on these rims!

The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.