Nakatanenga Ventilation Panels Side Windows - Land Rover Discovery 1/2/3/4
Nakatanenga ventilation panels side windows - Land Rover Discovery 1/2/3/4 The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Prices incl. VAT;
Service-Kit for Land Rover Defender Td4
Service Kit for Land Rover Defender Td4 Just one order number and you have all the replacement parts for a complete service on your Land Rover Defender 90/110/130 with TD4 engine (2.4 or 2.2 litre). Never again have to interrupt a service because you forgot to order all the necessary parts too! This service kit contains high quality products manufactured to O.E. specifications, but still offered here at a very attractive price.Contents: Oil filter (optional LR058104 for 2.2 from DA444247 OR LR004459 for 2.2 and 2.4 up to DA444246). Fuel filter Air filter Oil drain plug with rubber gasketThe use of a fuel breather pump is essential for the correct replacement of the fuel filter, otherwise the high-pressure pump of the common rail system will inevitably be damaged or even destroyed.
Prices incl. VAT;
Nakatanenga door sills for Land Rover Defender
Stainless steel door sill panel The door sill prevents damage to the paint during boarding and disembarking and the door rubbers (with wire inlay) scrub there. In addition, it enhances the look. The door sill is made of stainless steel, stainless steel mounting material is included. The installation of the door sills is done on the existing holes of the floor panels. The door sill panel is available for Land Rover Defender 90/110/130 with two or four doors, so sets contain two or four of the strips. Please select the required variant below.
Prices incl. VAT;
Nakatanenga door net
Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.
Prices incl. VAT;
Nakatanenga Connector for fuel lines, set
Nakatanenga Connector Fuel Lines The factory installed connector plugs on the Land Rover Defender Td5 fuel system are fragile (especially on older vehicles) and often break off the first time they are disconnected. This tends to happen during the following operations: Fuel cooler installation/removal Fuel tank installation/removal Installing/removing the fuel pump General work on the fuel system Until now, the solution was to buy an expensive set of hoses. Now the Nakatanenga connecting plugs are available as an inexpensive alternative in a practical set of four. The plugs, turned for us from high-strength aluminium, are also much more stable than the original parts.
Prices incl. VAT;
Housing for remote control Land Rover Defender
Only the most hardened purists would welcome a return to the times before central locking. Let’s be honest, we’ve all become too spoiled. A Landy with central locking is better than one without. Our replacement case for the key fob is meant to replace the original one when the the buttons are faulty or the shell too worn out from use. Simply install the electronics from the original remote in the new key fob case and attach to your key ring. New programming is not required. Suitable for Land Rover Defender with separate remote control, incl battery CR2032. Except for remote controls with the following form:
Prices incl. VAT;
Trekfinder Wheel Spacers for Land Rover Defender 90/110, 66mm per axle
Aluminium spray widener for Defender 90/110 66mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70 per cent lighter than ordinare spacers made from steel. Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 66 mm per axle (2x 33 mm) material: aluminium alloy colour: black alignment: center alignment vehicles: Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate. Please note: The wheel spacer is not suitable for Dotz Dakar rims, as this rim has a built-in wheel spacer of 25 mm.
Prices incl. VAT;
LR WOLF Steel Wheel 6.5x16"
The Legend for Your Adventure: Original Land Rover Wolf Steel Wheel 6.5x16" Are you ready to give your Land Rover the upgrade it deserves? With the original Land Rover Wolf steel wheel ANR4583, you're bringing a piece of indestructible off-road history directly to your vehicle. It's not for nothing that the "Wolf" wheel, as it's affectionately called, is the first choice for military vehicles and demanding expeditions worldwide. Its robustness is legendary. Made from high-strength steel, this wheel can take even the toughest impacts off-road. Where alloy wheels give up or break, you can rely on this steel wheel – it's built to last and, in an emergency, can even be hammered back into shape. A must-have for anyone who truly wants to use their vehicle as intended! With dimensions of 6.5J x16 inches and Land Rover part number ANR4583, it's the perfect choice for your Defender, Discovery 1, or Range Rover Classic. It is, of course, tubeless-compatible and ready for your favorite off-road tires, such as the popular 235/85R16 or the classic 7.50R16. Your advantages at a glance: Original Land Rover Part: Quality and perfect fit you can rely on (Part No. ANR4583). Legendary "Wolf" Stability: Designed for the toughest conditions and maximum durability. Material Steel: Extremely robust, resistant to damage, and ideal for demanding terrain. Optimal Size: 6.5J x 16" – a proven dimension for many common off-road tire sizes. Tubeless-Compatible: Compatible with modern tubeless tires. Versatile Use: Perfect for tough off-road use, overland trips, or simply for an authentic look. Classic Look: Gives your Land Rover that unmistakable, rugged appearance. Due to the offset (ET), tires sized 255/85R16 can be used with additional wheel spacers – this is also covered by the H&R wheel spacer approval. However, wheel spacers are not strictly necessary. Notes: We generally recommend powder-coated wheels, as wheels with only a primer are still susceptible to corrosion due to open pores. Therefore, there is no right of return for corrosion on primed wheels. The wheels have stamped technical data – visible when mounted – for registration purposes. See pictures! Suitable for Land Rover Defender 90/110/130, Discovery 1, or Range Rover Classic. Please note: Lug nuts for alloy wheels cannot be used on steel wheels. You will need our lug nut set RMSF23. We recommend balancing the wheels for the Land Rover Defender using a lug-centric or bolt-pattern-centric method. These are original Land Rover wheels – unfortunately, we have to pass on the significant price increase from Land Rover. Give your Landy not only an authentic look but also the certainty that your wheels won't let you down – no matter where your next adventure takes you. Get the Wolf steel wheel now and be ready for anything!
Prices incl. VAT;
Set of 4 Defender hub caps
Plastic hub cap set of 4 WITHOUT LR-LOGO - Suitable for Discovery 1 1989-1998, all Defender and Range Rover Classic Scope of delivery: 4 pieces
Prices incl. VAT;
Nakatanenga Rear Door Damper TOP Mounting
Reliable support for your vehicle door Rear Door Damper for Land Rover Defender 90/110, fitted to the TOP of the rear door. Conversion kit, comes with stainless fittings, only for vehicles with rear door, suitable for all model years. The rear TOP door damper replaces the standard door arrester with a special gas strut with soft-stop function that keeps the door secuerly opened. The damper also works when fitted alongside our rear crossmember spare wheel carrier.
Prices incl. VAT;
Starter Overhaul Kit for Land Rover Defender / Discovery Td5
Set for overhauling the starter motor of the Defender Discovery Td5 In 99 per cent of all the cases that a Td5 starter is replaced it is not the actual motor itself, but the magnetic switch that is broken. Often its contacts are burned or worn, which still allows the starter to spin, but without the engine starting or only starting very reluctantly. For these cases we offer a cost-effective solution: with our service kit you can overhaul your starter yourself for a fraction of the price for a new OE starter (more than EUR 400,-). This is an easy DIY job without the need for special tools or expertise. Note: our starter service kit is not available at the manufacturers DENSO or Land Rover! In contrast to many cheap offers, ONLY WE offer a complete kit with all necessery parts as well as enlarged and strengthened contact plates.
Prices incl. VAT;
Set (4 pcs) plastic rivets grille + corner bumper Defender with AC AB4A670710
Plastic Rivet Set for Defender Grille and Bumper These rivets are used on all models of the Land Rover Defedner from 1987. The plastic rivets are suitable as end caps for Land Rover Defender bumpers or e.g. also as a clip on the grille and on some interior panels. Fits a 7 mm holeHead diameter: 18 mmTotal wavelength 27 mm
Prices incl. VAT;
Gasket Set for Fuel Cooler FCTD5AT
Repair kit for fuel cooler The repair kit for the fuel cooler consists of 4 rubber rings which ensure a secure seal. Suitable for the fuel cooler PIB000060 (see illustration) of the Defender Td5 and the Discovery II.
Prices incl. VAT;
Plastic expanding rivets for door panels and mudguard extensions - Defender
Plastic expanding rivets, black Plastic dowels for door panels and mudguard extensions for Land Rover Defender
Prices incl. VAT;
Fuel Tank Extraction Parking Heater for Land Rover Defender Td5 2.5, Td4 2.4 and Td4 2.2
Fuel filler nozzle for Land Rover Defender Td5 2.5, Td4 2.4 and Td4 2.2 The fuel extractor for the Land Rover Defender 90/110/130 Td5 2.5, Td4 2.4 and Td4 2.2 enables the auxiliary heater to be supplied with diesel without the time-consuming and labour-intensive removal of the fuel tank.The fuel is extracted by looping the extractor into the hose between the vehicle's fuel nozzle and tank and is therefore possible without removing or drilling into the tank. The fuel dispenser is suitable for various parking heaters, including Webasto Airtop 2000 and Eberspächer Airtronic D2.The fuel filler cap can be flexibly bent, allowing you to control whether the parking heater can completely empty the vehicle's tank or whether a fuel reserve should remain. It is ideally suited for our AUTOTERM Planar heaters.Outer diameter: 59 mmMaterial thickness: 2 mmPlease note: This fuel filler is not suitable for TDI models, as these have a larger pipe diameter.
Prices incl. VAT;
Rear Ladder for Land Rover Defender, short
Rear ladder for easier access to the roof of the Defender 90 and 110 Rear ladder suitable for Land Rover Defender 90/110 allows for easy access to roof rack. This ladder is supplied WITHOUT an additional rear step. This can be ordered separately. The ladder is produced for us from high-grade aluminium alloy and WIG welded, resulting in a very lightweight (1.8 kg only) and durable ladder. The steps feature an anti-slip design. Available with or without black powder coating. Please choose.
Prices incl. VAT;
LED signal lights Land Rover Defender: tail light / brake light, red
LED tail light / brake light for Land Rover Defender, red E-markedPlease also see our bundles with all signal lights at a saving: LED signal lights for Land Rover Defender Please note: The screws must not be over tightened (only hand-tight!), Otherwise the plastic housing may crack. These cracks could allow water to penetrate into the generally watertight luminaires. Use only a screwdriver and NO cordless screwdriver!
Prices incl. VAT;
Dotz Dakar 7x16" ET 8,5 Steels Rims
Dotz Dakar 7x16” steel rim Dotz Dakar 7x16 inch, steel rim, ET 8,5x165.1mm, color: either silver, black or bronze for Land Rover Defender 90 and 110, Land Rover Discovery 1 and Range Rover Classic. Due to the higher axle load, the rim is not suitable for the Land Rover Defender 130. Please note that you need wheel nuts for steel rims; if you convert from alloy rims, these wheel nuts can NOT be used. You will then need our wheel nut set RMSF23. The Dotz wheel is supplied without the wheel nuts and hub caps shown. Weight of one rim: 11.5 kg Rims for the Land Rover Defender (except original rims) must be balanced bolt-centered or bolt circle-centered. Please select the desired color.
Prices incl. VAT;
Stainless steel mounting kit for floor panels in footwell 2nd row of seats, for Land Rover Defender and Series
Stainless steel mounting set for floor panels in the footwell 2nd row of seats, for Land Rover Defender and Series. Fastening set includes the parts for driver and passenger side
Prices incl. VAT;
Front wiper for Land Rover Defender Series II and Series III
Reliable Visibility in All Weather Conditions These classic front wiper blades are a perfect fit for all Land Rover Series II and III models. Designed to match the original mounting system and equipped with durable rubber blades, they ensure clear visibility – whether it’s rain, snow, or mud. Details: Suitable for Series II / IIA / III Original length and mounting style Sturdy metal frame in black finish Easy installation – plug & play Ideal for those who value both functionality and original appearance. Suitable for left and right sides – please check quantity when ordering.
Prices incl. VAT;
Heavy Duty Mud Flaps for Land Rover Defender
Splash guard Heavy Duty Nakatanenga heavy duty mudflaps for Land Rover Defender 90/110/130, set containing 2 pieces. Our mudflaps are available for either front or rear axle fitting. Our mudflaps are made of HDPE (high-density polyethylene) and are very durable with less danger of ripping them off when reversing. Can be fitted to the front with the original mountings or our heavy duty mudflap mountings. At the rear the original mountings are used.
Content: 2 Piece (€22.50 / 1 Piece)
Prices incl. VAT;
Nakatanenga sun visor organizer for Ineos Grenadier
Sun visor organizer for Ineos Grenadier With its classic boxy design – inspired by the old Defender, of course – the Ineos Grenadier is as spacious as can be. And there’s the catch, because it is very easy to lose track of all your small and important things in the Grenadier’s huge cockpit. But now there’s an easy solution available: our practical organizer for the sun visor features a spacious zipper pocket, MOLLE and Velcro patches. All your essential vehicle documents, parking licenses, keys, pens, sunglasses and other small paraphernalia can be kept within easy reach at all times, without restricting your forward vision or driving attention in any way. Four sturdy Velcro straps guarantee a tight fit on the sun visor, even in rugged off-road terrain. The organizer is made of PU coated nylon 6.6 fabric and therefore extremely durable and easy to clean. Available in black Dimensions:on the sun visor: 46.5 cm x 16.5 cmopen: 46.5 cm x 33 cm Each organizer has to be ordered separately.
Prices incl. VAT;
Armrest for Land Rover Defender 90/110/130
Leather armrest for Land Rover Defender Our armrest for the doors of your Land Rover Defender 90/110/130 is just that bit of extra that adds a whole new level of comfort - even on long journeys. Finally you can rest your elbow comfortably, making driving so much more relaxing and safe. Our armrest is made of an intricate aluminium subframe which is covered by hand in naturally tanned leather (black). The rest is available either for left or right hand side doors or, with a saving, as a bundle for both doors. No drilling required. Please choose.
Prices incl. VAT;
Gasket Windscreen Defender MY 1987-2016
Land Rover Defender Glazing Rubber - Windscreen Gasket LR056278 A replacement rubber seal for the windscreen glazing. High quality spare part - Fits models MY 1987-2016 Windscreen, green tinted and heated for Defender up to MY 2016 you will find HERE in our Shop Windscreen, green tinted for all Defender 90/110 you will find HERE in our Shop
Prices incl. VAT;
Nakatanenga rim reinforcement for splash guard holder
Nakatanenga rim reinforcement for splash guard holder Edge reinforcement for splash guard holder, for Land Rover Defender 110.Dimensions of a single edge reinforcement: 10 x 2.3 cm. Supplied in pairs.
Prices incl. VAT;
Mud flap holder for Land Rover Defender 90 and 110, until MY2016
Spray Flap Holder for Land Rover Defender 90 and 110 Stainless steel holder for Land Rover Defender 90 and 110 (all years of manufacture), for optional front or rear axle, Supplied in pairs, including mounting hardware. IMPORTANT NOTE: If you still want to build corner protectors on the Land Rover Defender 90 or if you have already attached them, you need the flap holders WITH recess (select "vehicle type"). The original spray flap brackets are made of painted steel. Anyone who has been driving a Defender for a long time knows that every few years the brackets rust through, as the paintwork flakes off over time and dirt, oily deposits and constant moisture provide the perfect conditions for corrosion. Our own custom-fit splash guard brackets are not only made of stainless steel, but are also powder-coated black. This makes them extremely robust, corrosion-resistant and durable. This finally puts an end to the constant replacement of the holders. Of course, existing splash flaps can still be used.Suitable for Land Rover Defender up to MY2016. If you want to be on the safe side, we also have matching edge reinforcements for the splash guard holders. Supplied in pairs.
Prices incl. VAT;
Land Rover Defender OEM front bumper
Original Look for Your Defender (90/110/130): The OEM Front Bumper! Has your old front bumper seen better days? An unfortunate bump off-road, corrosion, or simply the desire for a fresh, original look – there are many reasons to replace the bumper on your Land Rover Defender. With this OEM (Original Equipment Manufacturer) front bumper, you ensure that your Defender retains its classic and authentic character. It matches the original part installed at the factory in terms of shape, quality, and fit. This speaks for the OEM Front Bumper: Perfect Fit: Designed as an original part, this bumper fits your Defender 90/110/130, all model years, without any need for modifications.Since this OEM bumper corresponds to the original bumper installed at the factory, no entry in the vehicle documents is necessary. Authentic Look: Preserve the original appearance of your vehicle. Ideal for restorations or if you value originality. Robust Quality: Manufactured to the vehicle manufacturer's standards to withstand the demands of everyday use and light off-road conditions. Easy Replacement: The exchange is usually straightforward, as all mounting points correspond to the original. Value Retention: Using original parts can positively impact the value retention of your Defender. Whether you need to replace a damaged bumper or simply want to restore your Defender to its former glory – with this OEM front bumper, you're making the right choice. Surface: optionally black primed or hot-dip galvanized. Please note: The black primed bumper is only PRIMED (!) and should be painted or powder-coated before assembly, as it is otherwise not corrosion-resistant. Give your Defender its original face back! Order your OEM front bumper now!
Prices incl. VAT;
Additional reversing light for Land Rover New Defender from MY 2020-2025
Upgrading the reverse lights on your car is always a good idea – better visibility for others and for yourself when you’re parking backwards, when maneuvering with and without trailer or driving off-road in the dark. Stronger reverse lights also greatly improve the performance of reverse cameras. For the New Defender, we are offering an extremely elegant solution that needs no external fittings and has the seamless appearance of standard equipment. Underneath the rear lights on both sides of L663, two recesses in the body are ideal for housing the additional reverse lights with their six white LEDs each. Mounting the LEDs in the recesses is easy. Two perfectly fitted brackets are attached inside the gaps with self-adhesive tape. Once the plinths are fitted the LEDs are simply screwed in. The wiring is plug & play and includes all the necessary connections to the existing reverse lights. Installation or de-installation (if necessary) are simple DIY projects because the rear light panels are only clipped in and can easily be removed. Since there are no drill holes or other alterations necessary, there are no permanent traces or damages on the vehicle’s exterior. The high-quality LEDs with their watertight housing and the tough polycarbonate lenses provide more safety for you. The custom-fitted design and the superior components are a real improvement for the overall appearance of the Defender’s rear. Please note:The reverse LEDs come with an E-certificate but we have to emphasize that regulation in the EU prohibits the use of more than two reverse lights on passenger vehicles in regular road traffic. To accommodate these provisions, we are offering perfectly fitted covers for the LEDs to be used on publics roads or for technical inspections.
Prices incl. VAT;
Window guards for Land Rover Defender 90/110
Window grille for Land Rover Defender 90/110 Window grille, for Land Rover Defender 90/110, for the rear side windows, material: aluminium, anodized, black powder-coated, 1 piece, delivery incl. blind rivets Please also note our optional safety mounting set for these grilles. Suitable for the rear side window of the Land Rover Defender 90/110 or windows of the same size (108x45 cm) Dimensions for mounting: Hole spacing horizontal: 112 cm Hole spacing vertical: 49 cm
Prices incl. VAT;
Wiper arm for Defender LHD, BJ 2001-2016
Land Rover Windscreen Wiper Arm Part for Defender 90/ 110/ 130 year of construction 2001-2016
Prices incl. VAT;
MOMO Competition steering wheel with anodised spokes, incl. TREKFINDER steering wheel hub
For the highest demands MOMO Competition steering wheel with anodised spokes, incl. TREKFINDER steering wheel hub MOMO steering wheel Model "Competition" with TREKFINDER steering wheel hub - only available at Nakatanenga! ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. You need a steering wheel hub for the MOMO steering wheels. Horn: Gloss Black MOMO ItalyScrew: BlackSpoke Finish: SilverStyle: TuningDiameter: 350mm (13.78 in)Material: AirleatherColour: Black
Prices incl. VAT;
Steering damper for Land Rover Defender 90/110/130 from TREKFINDER
Reinforced steering damper for the Land Rover Defender The reinforced steering damper is the ideal upgrade for the Land Rover Defender to significantly improve steering precision and driving stability, especially in off-road use. By reducing unwanted steering movements and vibrations caused by bumps in the road, this damper enables a safe and comfortable driving experience.Improved durability and performanceEquipped with advanced "Foam Cell" technology, which prevents oil and gas mixing, and a precision-machined 35 mm piston, the damper ensures optimum performance and durability both on and off-road. It is particularly effective against unstable handling caused by factors such as ruts, oversized tires or wheel spacers."Foam Cell" technologyFoam Cell technology prevents the oil from foaming, which ensures consistently high performance. This technology eliminates the risk of oil-air mixing and reduces the risk of overheating, making the damper particularly efficient.Increased ride comfortIn use, the damper effectively reduces unwanted movements and vibrations, which significantly increases ride comfort, especially at higher speeds and off-road. The stable steering control and improved directional stability in all conditions ensure a safe driving experience.When is a reinforced steering damper for the Defender useful?The reinforced steering damper for the Land Rover Defender is particularly useful if larger tires or a track widening are installed or the Defender is raised. This is because the conversion significantly increases the forces acting on the steering damper. In this case, the standard steering damper of the Defender quickly reaches its limits. The steering feels spongy and bumps in the road are very noticeable.Installation and registrationInstallation is straightforward and does not require TÜV registration, thanks to the adaptation to existing mounting points. Technical data: "Foam Cell" technology in twin-tube design 35 mm bore and sintered piston No TÜV registration required Simple installation on original mounting points
Prices incl. VAT;