Shop by vehicle

Webasto Thermotop EVO5 mounting bracket Stainless steel bracket for mounting the Webasto Thermotop EVO5 water heater or AUTOTERM flow in the Land Rover Defender TD4 2.2 or 2.4. Existing mounting points are used to attach the parking heater, the required stainless steel mounting material is included with the parking heater bracket. Stainless steel and rust information sheet Important note: the mounting bracket only fits if the air intake in the engine compartment has been adapted (e.g. with our optimised air intake or our SN4 snorkel systems)    

Nakatanenga Ventilation Panels Sliding Window Boot- Land Rover Defender until MY2016 It’s probably fair to say that the sliding rear windows on the Defender are more of a charming anachronism than a fully usable window. Due to their size and the horizontal sliding direction, it makes little sense to have them open while driving – especially in rainy weather or dusty conditions. And while parked, they are an open invitation for burglars and thieves.That’s why we have expanded our range of ventilation plates and are now offering them for both sides of the rear sliding windows in the old Landy (up to MY 2016). The plates have a folding mechanism in the middle that allows for vertical positioning in the open window. By pushing the windowpane forward and locking it, the ventilation plate sits firmly in position – allowing for perfect ventilation without compromising comfort or security while driving or parking.A standard feature of our ventilation plates is the insect mesh inside the horizontal ventilation slits. Peace of mind is guaranteed, whether it’s two or six-legged pests. Water run-off or spray is also kept out of the inside of your Defender. And with their black powder coating, the aluminum plates perfectly match the rugged look of any Landy.  Length 2 slats: 215mmLength 3 slats: 270mm The ventilation plates are available individually, optionally for the left or right window. Please select the sheets according to your windows: If the window frame has 3 short slots at the bottom, please select the ventilation plate with 3 rows of louvres (Art. no. LBLH-3LAM-DEF)   If the window frame has 1 long slot at the bottom, please select the ventilation plate with 2 rows of louvres (Art. no. LBLH-2LAM-DEF)   Please note:In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Everything Under Control with the Clips Maxi Box This box contains the most popular clips, plastic rivets, mating bushings and mounting hardware for Land Rover vehicles. The set contains the following 280 parts: 35 pieces rivet15 pieces trim fastener15 pieces scrivet15 pieces scrivet15 pieces scrivet25 pieces finisher clip20 pieces stud door casing20 pieces stud door casing - blue20 pieces fastener60 pieces snapsac25 pieces door casing stud15 pieces fir tree roof insulation retainer

LT230ATB installation kit required for the Ashcroft LT230 ATB The kit contains: Collapsible spacer  Nut for the intermediate bolt  Centre diff nut  2 x O-rings  2 x Timken bearings  8 x washers  Silicone sealant Torsen locking differential as centre differential for the LT230 transfer case can be found here in the shop !

Cargo net for the classic Defender The roof lining is the least utilised area in the interior of a car. Yet it's a great place to pack away light and flat items in particular - if you have one of our ingeniously practical cargo nets installed.The 102 x 76 cm net for the old Defender (up to 2016) can be stretched in different ways depending on the vehicle size or configuration. In the 110, for example, this means at the very rear above the load compartment or the third row of seats, or in the centre. As the net is always accessible from the front and rear, this practical storage space extension can even be accessed quickly from the driver or front passenger seat in hardtops, camper conversions and other two-seaters.Tightening the flexible cargo mesh in the roof liner is extremely easy with 14 straps and belt clamps. The supplied expanding rivets also enable the aforementioned customised positioning of the holder. A 10.5 m long elastic band can also be pulled in under the mesh in a zigzag shape. This results in an additional packing level in which light objects, blankets, jackets and much more can be kept within easy reach.The cargo net for the classic Defender is available in black, grey and coyote. Scope of delivery:  1x cargo net14x strap cramps28x fastening rivetsInfo: These are special rivets. These rivets mushroom particularly wide and are therefore particularly durable in plastic panelling. You can find our Cargo Net Expedition for the Land Rover Defender here

Protective grille for blinker, brake and parking lights Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)

EXTREMEspec release bearing strong and reliable The EXTREMEspec release bearing has been made not only strong and reliable, but also durable by adding a simple feature that allows grease to be used on the surface of the guide tube. Oil rings keep the grease in place and protect it from contamination. This grease barrier not only protects the release bearing, but also the guide tube itself. It also minimises clutch release bearing rattling, a common problem that causes a loud rattling noise at idle due to lack of grease and poor design tolerances. Fits 2.5NA Millitary transmissions and Stumpy R380 from Ashcroft Transmissions

Swivel stainless steel recovery point with stainless steel shackle for the highest demands. Designed for the OEM front bumper on the Land Rover Defender 90/110/130. This recovery point is an indispensable accessory for serious off-road enthusiasts and professional users who rely on maximum reliability and safety during recovery operations. Developed for demanding use, this swivel recovery point offers superior performance and durability. Robust Construction for Maximum Safety Made from high-quality stainless steel, the recovery point is characterized by its extreme robustness. The mounting adapter, the shackle, even the retaining ring are made of stainless steel. Rust is therefore a thing of the past here. The main structure is solidly bolted and designed for high loads. This massive construction ensures that the recovery point can withstand even the harshest conditions and high tensile forces. The careful workmanship and material selection guarantee a long service life, even with regular and intensive off-road use. Optimal Flexibility thanks to 360° Swivel Function A special feature of this recovery point is its 360° rotatable stainless steel shackle pin. This feature allows for the flexible attachment of recovery shackles or ropes from various angles without causing adverse lateral loads on the recovery point or vehicle structure. This is particularly advantageous in rough terrain, where the vehicle to be recovered is often not ideally positioned. The swivel function minimizes the risk of material fatigue and increases safety during the recovery process by ensuring optimal force transmission. Thoughtful Design - Additional Feature This swivel recovery point is not only functional but also thoughtfully designed. The edges of the recovery point are rounded, which ensures optimized pedestrian protection and minimizes the risk of injury. Rely on the swivel recovery point from Nakatanenga – your strong partner when it matters most.

Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Secure seat installation in the Defender The seat console corresponds to the Land Rover part number 349996. Measurements: 450x465 mmMaterial: Steel, black powder coated You can contact us by E-Mail or telephone, if you want the deluxe seat with back rest and head rest or the deluxe seat with the back rest only.

profile for body rear or rear tub, 3-pcs Spray from wet roads, rain water, dirt, chemicals and mechanical stress all take their toll on the rear of the classic Defender (up to MY 2016) and the Land Rover Series III, especially on the trim strip under the edge of the tail gate. This aluminum profile helps to seal the door and the cargo hold, it protects the loading edge and also holds down the carpet or floor mat in the cargo area. No wonder that it frequently has to be replaced, whether it’s for visual defects or functional degradation. Our replacement profile matches the Land Rover OEM part (AQR710020) in form, function and quality, but offers a lot more value for money, as it only costs about half as much. 

Wheel spacer TREKFINDER for JEEP® Wrangler JK +60 millimetres per axle ( 30 mm per disc/ side ) black anodised Suitable for the following models/ Wrangler models: Model Jeep Wrangler/ Jeep Wrangler Unlimited Type JK EG-TG-No. e4*2001/116*0116* Details: Made of high-strength aluminium alloy Black hard anodised with 60 mm wheel spacer per axle (30 mm per side) DRM system (washers with pressed-in bolts are slid over the existing vehicle studs and screwed tight) Use with steel rims is prohibited incl. fastening material (10 cone collar nuts) incl. TÜV® parts certificate Price and scope of delivery is for one axle The spacer rings may only be fitted in conjunction with standard LM wheels and in combination with the cone collar nuts supplied. The spacer rings are not permitted in conjunction with steel wheels. The screw-in length of all fastening elements must be at least 6.5 turns. Ensure that the stud bolts are of sufficient length. The notes in the assembly instructions for the spacer rings must be observed. The installation of spacer rings is not permitted if the diameter of the spacer rings is smaller than the diameter of the wheel contact surface. A modification approval by TÜV, DEKRA etc. is required. However, the entry in the vehicle documents can also only be made at the next appointment with the responsible registration authority. In the meantime, it is sufficient to carry the parts certificate and the confirmation of the modification approval. All fastening elements must be checked with a suitable torque spanner after approx. 100 km of driving. Compatibility or usability of specific snow chains cannot be guaranteed. PLEASE NOTE: Only in conjunction with LM wheels with corresponding GIESSTASCHEN = standard stud bolts or nut heads protruding beyond the wheel surface may sink.The standard stud bolts may have to be shortened.The minimum screw-in length of all fastening elements of 6.5 turns must be maintained.

Tailgate Organiser – Tailgate organisation system for the Jeep Wrangler JK Whether you're going on an off-road tour or a camping trip, small items such as tyre repair kits, gloves or winch controls can be stored neatly in the Tailgate Organiser at the rear of the Wrangler. The MOLLE laser-cut system allows for flexible attachment options and ensures that everything stays in place – ready to hand at all times. The advantages of MOLLE Laser Cut: Lighter than sewn systems Quick attachment and removal of bags Particularly flat – no unwanted snagging Firm hold, no slipping You can find more information about MOLLE in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bags, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organiser base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.  

Tailgate Organiser – Tailgate organisation system for Suzuki Jimny 1+2 For anyone who drives a Suzuki Jeep: the Tailgate Organiser transforms the tailgate into a practical storage space for small items such as first aid kits, tools or outdoor gadgets. Thanks to the MOLLE laser-cut system, various bags can be attached flexibly – for tidiness and quick access. The advantages of MOLLE Laser Cut: Reduced weight thanks to less material Easy attachment and removal of bags Flat design, no snagging Firm and secure hold Further information on the MOLLE system can be found in the downloads. Scope of delivery: Suzuki Jimny up to model year 2018 FJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny 2 GJ/HJ: 1x MOLLE multi-purpose bag1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE tailgate organiser base plateOptional: 1x MOLLE first aid bag with Velcro base plate Important note: On Suzuki Jimny models built from 2021 onwards (type GJ/HJ), the emergency release for the tailgate can no longer be used once the organiser has been fitted. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products.   Attachment: To attach the cover, it must be removed. Our disassembly tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place.To ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality.We are also happy to produce our Tailgate Organiser in custom designs. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.

Accessories Dashboard Mounting Point for New Defender L663 Practical mounts for cell phones, navigation devices, tablets, and other gadgets are indispensable, because even the latest cars with all their "connectivity" don't deliver everything an off-roader, overland explorer or ambitious camper requires. However, cheap plastic mounts are usually a waste of money and not everyone wants to stick suction cups to their windows either. Our mounting plates for the side handles on the dashboard of the New Defender are designed to support heavy duty mounts – like those from market leader RAM Mounts. The plate’s tight hold makes sure that nothing wobbles, collapses or falls off. But most of all, there are no suction cups involved as they tend to come loose when off-roading or speeding along bumpy dirt roads.The mounting plate is powder-coated black to match the interior of the new Landy and you simply fasten it with the existing screws of the handle. No drilling is required and removal is as easy as installation. Three strong, internally threaded 6 mm screw holes (M6) allow you to mount ball joints, brackets and other mounting equipment, either from RAM Mounts or other brands. In our bundle solution, the mounting plate comes with a 1-inch ball (type B) from RAM Mounts. Available with or without RAM Mount ball.  

Land Rover Headlight Protectors Protection for the main headlights of the Land Rover Defender, made of Makrolon, original Land Rover part, without E-mark, delivery in pairs.

13-pin E-kit for Land Rover Defender up to and including MY98- also suitable for other vehicles.   A 13-pin e-kit offers the advantage over a classic 7-pin e-kit that it can be used to supply additional consumers. These can be rear fog lights or reversing lights as well as parking aids. The Jaeger plug-in system in particular has established itself as a permanent fixture on the market and has become indispensable for rear carriers and caravans. The advantages of a 13-pin E-kit are obvious and always justify the slightly higher purchase price compared to a 7-pin E-kit.   Including JAEGER AFC trailer control module for automatically increasing the flashing frequency.    

Ventilation plates rear side windows - Ineos Grenadier The INEOS Grenadier stands for uncompromising off-road capability and robustness. Good air circulation, as with slightly open windows, but without the increased risk of rainwater ingress or theft? Plus effective insect protection? That's exactly what our ventilation panels with mosquito netting offer, precision-manufactured for the Grenadier from high-quality aluminium — no rattling universal parts. Supplied in pairs, powder-coated in black and visually unobtrusive, they are ideal for expeditions, camping and tough use. Installation: wind down the windows, insert the panels, wind up the windows. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it's securely in place without rattling. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Length: 520 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Ventilation plates rear side window  for VW Passat, Variant B8 (BJ2014-2023) The Volkswagen Passat Variant B8 is a spacious estate car suitable for everyday use by families and commuters. Good air circulation as if the windows were slightly open, but without any increased risk from rain or theft? Plus protection from insects? Our precisely manufactured ventilation panels with mosquito nets, tailored to the Passat Variant B8 and made of high-quality aluminium, achieve just that – no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure comfort when shopping, on holiday trips or when parking in the sun. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: approx. 675 mm  

Ventilation panels rear side window JAC T8 Pro  The JAC T8 Pro combines payload capacity with modern features. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection against insects? This is possible with our special ventilation panels with mosquito nets, which are manufactured specifically for the JAC T8 Pro — made of solid aluminium instead of rattling universal parts. The black powder-coated panels, supplied in pairs, ensure a discreet appearance and greater comfort in hot weather or when used as a work vehicle. Installation is straightforward: wind down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Length: 685 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Ventilation grille rear side window - Dacia Duster Gen. 3 from model year 2024 The Dacia Duster Gen. 3 (from 2024 onwards) impresses with its robust design, versatility and high utility value – whether in everyday use, on trips or for outdoor activities. Our ventilation panels for the rear side windows, specially developed for this model, enable permanent, reliable ventilation of the vehicle without compromising on safety or comfort. They provide pleasant fresh air, reliably keep rain and insects out and at the same time offer effective protection against unauthorised access. Ideal not only for campers and dog owners, but also for preventing heat build-up when parking in direct sunlight. What's more, they are super easy to install: wind down the window, insert the ventilation panel, wind the window back up, and you're done! Supplied in pairs. Please note: In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air!

Radiator Cover for Standard Grille The Nakatanenga radiator cover helps your Defender’s engine reach its optimal operating temperature faster during the cold season – improving both engine efficiency and cabin heating performance.   This cover is designed to fit the standard radiator grille (including Heritage style) and all Nakatanenga aluminium grilles of all Land Rover Defender models, with or without air conditioning.   The cover is screwed onto the mounting points of the radiator cover.    For maximum versatility, the radiator cover can be used in three configurations: fully closed, half closed (top or bottom), or fully open.   Manufactured to U.S. military specifications (MIL-SPEC) and according to Nakatanenga’s own high standards. Includes FitKit.

Original Upper Instrument Panel Cover – Suitable for Defender Td4 The upper instrument panel cover is an important genuine replacement part for your Land Rover Defender Td4. It forms the upper trim above the instrument cluster and provides a high-quality, clean appearance in the interior. At the same time, it protects the components underneath and completes the dashboard surface.   This part is ideal as a replacement in case of damage, age-related wear, or for refurbishment after repairs.    Product features: Land Rover genuine spare part Cover for the upper instrument panel / dashboard Specifically designed for Land Rover Defender Td4 Provides a clean finish above the instrument cluster Precise fit and long-lasting durability   Ideal for Defender owners who value genuine parts, perfect fit, and lasting quality.

Dashboard Grab Handle for Land Rover Defender Td4 (Puma/TDCi) The robust dashboard grab handle is the perfect solution if the original handle in your Defender is loose, damaged, or no longer looks good. Especially in everyday driving and on rough tracks, the handle provides better grip and safety – ideal as a replacement part for restoring the interior of your Defender Td4 (Puma/TDCi).   Your benefits at a glance Land Rover genuine spare part Secure grab handle in the interior – increased comfort for driver and passenger, especially off-road Quick replacement using the factory mounting points Ideal in cases of wear, breakage, or a missing handle   Suitable for Land Rover Defender Td4 / Puma (TDCi), from 2007 onwards   Scope of delivery 1 piece

Nakatanenga Ventilation Grilles for Side Windows - VW Touareg The VW Touareg is an SUV for anyone who wants a vehicle that combines performance, comfort, and versatility. It excels in everyday use as well as on long trips, offers ample storage space for luggage, gear, and even a dog, and remains confident even on rough roads, rugged trails, and off-road. Our rugged side window vents are the perfect match for this character: functional, high-quality, and made for people who don’t just drive their Touareg—they really put it to work.   Whether as a comfortable travel companion, a towing vehicle, a partner for outdoor adventures, or a practical everyday SUV—the Touareg demonstrates its strengths wherever durability and versatility are required. Anyone who travels with a dog, wants to dry wet clothes in the vehicle after a trip, transports damp sports equipment, or even spends the night in the vehicle knows how much good ventilation is appreciated. This is exactly where our ventilation grilles come into their own: they ensure a constant supply of fresh air in the interior without making the vehicle feel open or requiring a window to be left open and unprotected in any weather.   The precisely fitting ventilation panels for the VW Touareg are made of sturdy aluminum and feature a black powder-coated finish. This makes them not only durable and long-lasting but also a perfect visual match for a vehicle that embodies power, confidence, and resilience. Robust grilles for a robust car—that’s exactly what a solution for the Touareg should look like. The integrated ventilation slots with insect screens allow fresh air into the vehicle, keep insects largely out, and at the same time protect against light rain and splashing water. Compared to a simply open window, direct access to the vehicle is also significantly more difficult.   These ventilation panels are a particularly practical addition for adventurers, travelers, and dog owners. Whether you have wet jackets or shoes in your vehicle after a hike, are transporting sports gear that needs to air out, or want to give your dog plenty of fresh air even during a stopover, these ventilation panels create a significantly more comfortable interior climate. They are also a well-thought-out solution when spending the night in the vehicle or while traveling, when discreet and weather-protected ventilation is needed.   Installation is quick and easy: open the window completely, insert the ventilation panel, close the window again—done. In just a few simple steps, the VW Touareg becomes even more practical for anyone who drives a powerful vehicle suitable for both daily use and travel, and who also values robust, functional quality in accessories.   Your benefits at a glance Custom-fit for the VW Touareg Ideal for a powerful, robust, and versatile vehicle The perfect addition for travel, everyday use, outdoor activities, and adventures Good ventilation of the interior when the vehicle is parked Ideal for dog owners, travelers, and anyone who sleeps in their vehicle Convenient for airing out wet clothing or damp sports equipment With insect screen Protection against light rain and splashing water More difficult access to the vehicle compared to an open window Robust aluminum construction Black powder-coated Simple, quick, and rattle-free installation Note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels installed.    

Nakatanenga Side Window Vent Grilles - Porsche Cayenne The Porsche Cayenne uniquely combines sporty performance, exclusive comfort, and a stylish appearance. Our high-quality side window vent grilles are perfectly tailored to this character. They not only provide a practical solution for ventilating the vehicle but also emphasize the Cayenne’s elegant and confident presence.   With a vehicle like the Porsche Cayenne, every detail matters. Our custom-fit air intake covers blend seamlessly into the vehicle’s lines, offering a look that is high-quality, understated, and functional all at once. The precise craftsmanship, robust material, and black powder coating create a particularly elegant look that perfectly complements the Cayenne’s luxurious and sporty appearance. Rather than looking like aftermarket accessories, the vent grilles convincingly enhance the vehicle’s stylish appearance.   In addition to their high-quality appearance, the ventilation grilles naturally offer practical benefits as well. They allow for continuous ventilation of the interior without making the vehicle appear open. Fresh air can flow in, while insects are kept out thanks to the integrated protective grille. At the same time, the grilles protect against light rain and make it more difficult to gain direct access to the vehicle compared to an open window.   Whether you’re traveling, making quick stops, camping, or just going about your daily routine: these ventilation grilles make the Porsche Cayenne even more versatile without compromising on design or quality. Installation is quick and easy—simply open the window fully, insert the grille, and close the window. In no time at all, you’ll have an elegant and practical solution for a more comfortable interior climate.   Our extremely high-quality ventilation grilles are thus the perfect match for a vehicle that stands for dynamism, comfort, and exclusivity. They not only enhance functionality but also contribute to the overall premium impression—just as befits the Cayenne.   Your benefits at a glance Custom-fit for the Porsche Cayenne Exceptionally high-quality, elegant design Perfectly complements the vehicle’s luxurious and sporty character Stylish, discreet integration into the vehicle’s appearance Good ventilation of the interior With insect screen Protection against light rain and splashing water Makes it more difficult to access the vehicle compared to an open window Robust aluminum construction Black powder-coated Quick and easy installation Note: Children and pets must never be left in the vehicle at high temperatures, even with the ventilation panels installed.  

Optimum sun protection solution for the Jimny II: The ClimAir SONNIBOY for more comfort, privacy and safety One of the many strengths of the Jimny II is its great 360 panoramic view, rare for a 4x4. But the large windows – relative to car size – have one big disadvantage: the heat build-up on hot days is considerable and that’s especially problematic for a car that is a preferred mode of transport for pets and working dogs. Whether with or without air conditioning, the ClimAir SONNIBOY sun and privacy screens make your vehicle on hot days much more comfortable when you’re driving, when the car is parked or when you have to leave children or pets behind while shopping for example. The three elements making up the SONNIBOY kit are tailor-made to fit rear and rear side windows of the Jimny II. Moreover, they simply click into a sturdy, hardly noticeable and easy to install fastening system. And since most Jimny II’s are real work horses, the privacy screen feature is also of great value. Tools, hunting equipment or sports gear are discreetly kept from prying eyes whereas dogs and other pets feel a lot calmer and less exposed. The all-round visibility for driver and passengers from the inside isn’t diminished either due to the material’s special surface structure. And when compared to dark window films, the obvious advantage is the fact SONNIBOY nets can be removed whenever you need to. SONNIBOY sun and privacy screens by ClimAir offer quality Made in Germany.

Parts certificate TREKINDER for tyre conversion SUZUKI Jimmy II type GJ/HJ with aluminium rim/steel wheel 15 x 5.5 to tyre size 215/75R15 or 205/75R15 or 215/70R15   With this TÜV® parts certificate, you can easily fit the tyre sizes mentioned and have them registered by a test centre for Jimny II models type HJ with ABE-EG number: e6*2007/46*0515*. a speedometer check or new setting is required (on our Jimny the speedometer fitted with Goodrich AT) 1 TÜV® parts certificate is delivered as a document with the parcel service ( insured shipping ) only 1 part certificate will be delivered, NO tyres, NO rims etc. ! the illustrations/photos in the webshop serve exclusively as a visual aid for a 215/75R15 tyre on the original Jimny aluminium or steel rim, no tyres are included in the scope of delivery. the use of snow chains is not permitted ! there is NO brand binding for the tyres ! NO additional mudguard extensions are required ! it is NOT possible to send the certificate by e-mail or fax !    

Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs

Cruise control for Land Rover Defender Td5 MY02-MY07 Especially on longer journeys, it's quite tiring to hold the throttle in the Defender. Our new cruise control puts an end to that.Now, at the touch of a button, Defender will maintain the desired cruising speed. The cruise control takes over the current speed and maintains it - exceptions:    if the engine power is insufficient (e.g. high speed and at the same time a significant rise in the road), the cruise control switches off for safety reasons.     when the brake or clutch pedal is pressed.The cruise control is operated via 2 supplied stainless steel buttons:    a SET button to hold and increase the current speed.     a RESET button for switching off the cruise control, as well as for resuming the last set speed.The delivery is made as a complete set incl. detailed and illustrated instructions, which also enable "occasional screwdrivers" to assemble it.Time required: about 1-2 hours.Conclusion: A "must" for all those who often drive on the motorway or undertake long-distance journeys - even the journey to the port in Genoa, for example, becomes a "relaxing" experience...Please note: Really only suitable for Td5 MY02-MY07. The decisive factor is the installed control unit. The identification number of the control unit must start with NNN or NNW! If the identification number begins with MSB, this cruise control is not suitable.

Ventilation plates for the side windows of the Mercedes-G The G-Class stands for uncompromising robustness and presence. Good air circulation as if the windows were slightly open, but without the increased risk of rainwater or theft? Plus reliable protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the G-Class from high-quality aluminum, make this possible — no comparison to rattling universal solutions. Supplied in pairs and powder-coated in black, they remain discreet and functional, ideal for off-road tours and camping.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation plates in place. Length: 685 mm Scope of delivery: 1 pair Item number LBLH-G: Suitable for the 460 / 461 / 463 series from 1979 to 2017 Item number LBLH-G2018: Suitable for all series from 2018 onwards   <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>  

Ventilation plates rear side window  for Skoda Kodiaq MY2017-2023 Škoda Kodiaq II abMY2023 The Škoda Kodiaq is a spacious family SUV that is highly suitable for everyday use. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable protection against insects? Our ventilation panels with mosquito nets, which are tailor-made for the Kodiaq and made of high-quality aluminum, achieve just that—no rattling universal solutions. Supplied in pairs and powder-coated in black, they improve the interior climate on hot days and long journeys. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed.   Length: approx. 675 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>