Shop by vehicle

Trailing arm hanger kit TREKFINDER for SUZUKI Jimny I type FJ up to year of construction 2018 for the trailing arms at the attachment to the front axle for correction and optimisation of the caster angle recommended for suspensions from 3 cm of height increase 4 bushings with eccentric bore vulcanised in rubber

Seat pad Land Rover Defender Many Landy critics bemoan the seat position in the Defender, the missing elbow room and the spartan original Land Rover seats. But that’s doing a disservice to the furniture from Solihull, especially the improved versions that were introduced in 2007. Even taller drivers, with seat rail extensions installed, can do mile after mile without problems for back and behind. So, if you’re restoring an old Defender or you put too much mileage on yours, it’s worth considering to refurbish the old seats instead of putting brand new ones in. As long as the seat covers are fine and only the foam cores have disintegrated, an upgrade with new seat foams can make a huge difference. This is classic DIY and pretty easy to do with our replacement foams for backrests and seat cushions. Simply remove the whole seat, take the backrest and seat cushion out, remove the covers and rip the old foam off the frame. The new foam cores can be fixed to the frame with standard spray adhesives. Then reverse the process and enjoy your firm new seats. The seat fits all Defender standard outer front seats up to 2016, the backrest for 2007 - 2016. Not suitable for special models.

Nakatanenga Ventilation Panels Side Windows - Ford Ranger (from 2012 and from model year 2022)  The Ford Ranger is a robust pickup truck that impresses both off-road and in everyday use. With the right ventilation panels, the interior remains well ventilated even at high temperatures, while rainwater, insects, and uninvited guests stay outside. The aluminum, black powder-coated panels are inconspicuous, sturdy, and offer additional comfort for breaks on the road or when working with the vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 660 mm     

Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - Tdi, Td5, Td4 2.4, Td4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste. Note: The screws for the door hinges may have to be shortened.

Ventilation panels side windows for Toyota LandCruiser J150 / J120 (2002-2023) The J120 combines comfort with off-road capabilities for families and expeditions. The J150 is the modern flagship among Land Cruisers with high reliability. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus reliable protection from insects? Our ventilation panels with mosquito nets, precision-manufactured for the J120 from high-quality aluminium — no rattling universal parts — offer just that. Supplied in pairs and powder-coated in black, they are ideal for long tours and periods of standing in the sun. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again — and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 610 mm    

Ventilation plates rear side window for Mercedes-Benz M-Class W163 / W164, Model years 1997 to 2011 The ML 270 (W163) was one of the early Mercedes SUVs and offers solid everyday practicality. Good air circulation as if the windows were slightly open, but without any major risk of rain or theft? Plus protection from insects? Our custom-fit ventilation panels with mosquito nets, made for the W163 from robust aluminum—no rattling universal parts—achieve just that. Sold in pairs and powder-coated in black, they improve comfort when stopping and camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm    

HD rear left spring - Land Rover Defender 110/130 For maximum load capacity and driving stability This heavy duty coil spring has been specially developed for the right rear installation on Land Rover Defender 110 and 130 models. It is the ideal solution for vehicles that are regularly on the road with high payloads or heavy accessories.  Color code: red/red Price per piece

Nakatanenga ventilation panels side windows - Land Rover Discovery 1/2/3/4 (1989-2017) The Discovery combines comfort with serious off-road performance. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's possible with our ventilation panels with mosquito nets, tailor-made for the Discovery from high-quality aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they ensure a better climate in the interior during expeditions and long journeys. Installation is straightforward: roll down the windows, insert the ventilation panel, close the windows again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 520 mm    

Trailing arm hanger kit TREKFINDER for SUZUKI Jimny II Type GJ & HJ from MY 2018 onwards for the trailing arms at the attachment to the front axle for correction/optimisation of the caster angle recommended for suspensions from 3 cm height adjustment onwards 4 bushings with eccentric bore vulcanised in rubber

Rear ladder for easier access to the roof of the Defender 90 and 110 Rear ladder suitable for Land Rover Defender 90/110 allows for easy access to roof rack. This ladder is supplied WITHOUT an additional rear step. This can be ordered separately. The ladder is produced for us from high-grade aluminium alloy and WIG welded, resulting in a very lightweight (1.8 kg only) and durable ladder. The steps feature an anti-slip design. Available with or without black powder coating. Please choose.

Nakatanenga ventilation plates rear side windows - Mazda BT 50 from MY 2012 The Mazda BT-50 is a reliable pickup truck for work and leisure. Good air circulation, as if the windows were slightly open, but without the risk of rain or theft? Plus protection from insects? That's what our specially designed ventilation panels with mosquito nets offer, made from aluminum specifically for the BT-50 — no wobbly universal parts. Supplied in pairs and powder-coated in black, they are ideal for tough jobs and leisure trips. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 660 mm    

Nakatanenga window vents rear – Land Rover New Defender, from model year 2020 The new Defender combines modern technology with proven off-road capability. Good air circulation as if the windows were slightly open, but without the risk of rainwater or theft? Plus effective protection against insects? That's what our ventilation panels with mosquito nets offer, made to fit the New Defender perfectly from high-quality aluminum—no wobbly universal parts. Supplied in pairs and powder-coated in black, they complement the modern design discreetly and sensibly, especially when camping or on expeditions. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. Suitable for Defenders built from 2020 onwards. Length: 550 mm  

Air Ram Safari - Diameter 3 Zoll (76mm)  Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability.In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust.

Nakatanenga ventilation panels side window in front - Peugeot Boxer / Fiat Ducato / Citroën Jumper, from model year 2006 / Opel Movano, from model year 2021 / RAM ProMaster, from model year 2013 As a spacious transporter and popular base for campers, these vehicles offer plenty of space. To keep the air inside fresh even when stationary, specially adapted ventilation panels ensure reliable ventilation without increasing the risk of rain or break-ins. The discreet design in black powder-coated aluminum also provides effective protection against insects and contributes to a pleasant climate – whether in everyday use or when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 430 mm Suitable for: Citroën Jumper, Peugeot Boxer, and Fiat Ducato (all from model year 2006 onwards) as well as RAM Promaster (from model year 2013 onwards) and Opel Movano (from model year 2021 onwards) Material: Black powder-coated aluminum Ventilation plates on the driver and passenger sides must not be used while driving!    

Nakatanenga ventilation panels side window - Toyota LandCruiser J8, J9 and J10 (1990-2007) The Land Cruiser J8-J9-J10 is a simple, extremely robust classic off-road vehicle. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, made to fit the Toyota Land Cruiser J and manufactured from solid aluminium — no improvised universal parts — make this possible. Supplied in pairs and powder-coated in black, they make long off-road journeys more bearable. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 560 mm                          

HD rear right spring - Land Rover Defender 110/130 For maximum load capacity and driving stability This heavy duty coil spring has been specially developed for the right rear installation on Land Rover Defender 110 and 130 models. It is the ideal solution for vehicles that are regularly on the road with high payloads or heavy accessories.  Color code: red/green Price per piece

Nakatanenga window vent for lateral rear window of the Toyota Land Cruiser 76 and 79 Series from model year 1984 onwards The 76 Series is purist, robust and built for tough use. The 79 Series is a workhorse and at home in extreme conditions. Good air circulation as if the windows were slightly open, but without any increased risk of rain or theft? Plus reliable insect protection? That's what our ventilation panels with mosquito nets offer, specially manufactured for the 76/79 Series from solid aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for emergency vehicles and expeditions. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm Note: These ventilation plates were originally developed for the Jeep Wrangler. However, some of our customers use these ventilation plates for the Land Cruiser mentioned above. Due to the shape, there may be a small gap of 5-7 mm on the left or right between the plate and the window frame on the Land Cruiser. NOTE: Only suitable for 4-door models!  

Nakatanenga ventilation panels, rear side window – Citroën Berlingo K9 / Peugeot Rifter / Opel Combo / Toyota Proace City Verso, from model year 2018 The precisely fitting ventilation panels are ideal for high-roof combi vans such as the Citroën Berlingo, Peugeot Rifter, Opel Combo and Toyota Proace City Verso. These vehicles in particular are often used as family cars, campers or transport vehicles for dogs – and benefit greatly from good air circulation in the interior. The robust, aluminium-made and black powder-coated panels can be inserted into the lowered side windows in just a few simple steps. They reliably provide fresh air without allowing rain or insects to enter the vehicle, while also reducing the risk of unauthorised access. This keeps the interior pleasant even on warm days, whether you are on the move or stationary. Installation is straightforward: lower the window, insert the panel and raise the window again – done. ⚠️ Important note: Even with ventilation panels in place, children and animals must not be left unattended in the vehicle. Suitable for: Citroën Berlingo K9 (2018 and later), Peugeot Rifter, including L2 seven-seater, Opel Combo and Toyota Proace City Verso (all from model year 2018 onwards) Note: only suitable for vehicles with optional equipment package (sliding doors in row 2 with lowerable side windows) Material: aluminium, black powder-coated Dimensions: 571 x 147 mm    

Air Vents for Range Rover Sport BJ 2006-2010 The Range Rover Sport combines sporty looks with luxurious comfort. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito nets, suitable for the Range Rover Sport and made of high-quality aluminum, deliver just that—no rattling universal parts. Supplied in pairs and powder-coated in black, they offer discreet functionality without detracting from the interior. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 500 mm    

Fresh Air for Your Defender 110/130 up to model year 2016 – Secure and Insect-Free! Fresh air for your Defender 110/130 – safe and insect-free! The Defender 110 is synonymous with rugged off-road culture. Good air circulation, as if the windows were slightly open, but without any increased risk of rain or theft? Plus insect protection? Our ventilation panels with mosquito netting, made of sturdy aluminum and tailored to fit the Defender 110/130, achieve just that — no rattling universal parts. Supplied in pairs, powder-coated in black, they offer discreet protection and comfort on expeditions or when used as an everyday vehicle. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 500 mm    

Nakatanenga ventilation panels side window - Jeep Cherokee XJ (1984-2001), Nissan Navara D40 2004 bis 2015 Suitable for: Jeep Cherokee XJ (1984-2001) Nissan Navara Double Cab D40 (2004-2015) The Jeep Cherokee XJ and Nissan Navara are classics for off-road enthusiasts and individualists. Good air circulation, as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? Our ventilation panels with mosquito nets, made of durable aluminum and tailored to fit the Cherokee XJ, make this possible — no comparison to rattling universal solutions. Powder-coated in black and supplied in pairs, they blend discreetly into the classic look and increase comfort on tours and excursions.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 410 mm    

Ventilation plates rear side window Toyota Hilux from model year 2016 The newer Toyota Hilux models are more modern and powerful, but remain just as robust. Good air circulation as if the windows were slightly open, but without the increased risk of rain or theft? Plus protection from insects? That's what our precisely fitting ventilation panels with mosquito nets offer, made from durable aluminium — no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for work and leisure. Installation is straightforward: wind down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels installed. Length: 560 mm     

Ventilation plates for the rear side windows of the Jeep Wrangler Unlimited JK up to model year 2018 The Jeep Wrangler JK is built for adventure and off-road use. Good air circulation, like with slightly open windows, but without a larger opening for rain or theft? And protection from insects at the same time? That's what our ventilation panels with mosquito nets offer, made specifically for the Wrangler JK and made of aluminum—no rattling universal parts. Supplied in pairs and powder-coated in black, they are ideal for camping, beach days, and longer breaks outdoors.  Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with ventilation panels in place. Length: 475 mm                                                                                                                                                                                                                                          

Nakatanenga window vent for lateral rear window of the Jeep Wrangler Unlimited JL from 2018 and JLU Gladiator Nakatanenga ventilation panels for the rear side windows of the Jeep Wrangler Unlimited JL from 2018 onwards and JLU Gladiator The modern Jeep Wrangler JL combines off-road capability with contemporary comfort. Good air circulation, as with slightly open windows, but without the increased risk of rainwater or theft? Plus reliable insect protection? Our ventilation panels with mosquito netting, precisely tailored to the Wrangler JL and made of sturdy aluminum, deliver just that — no rickety universal accessories. Supplied in pairs and powder-coated in black, they provide greater comfort in hot weather and when camping. Installation is straightforward: roll down the window, insert the ventilation panel, close the window again – and it sits securely and rattle-free. ⚠️ Important note: Children and animals must never be left in the vehicle at high temperatures, even with the ventilation panels in place. The ventilation panels are supplied in pairs. Dimensions: 442 x 126 mm NOTE: Only suitable for 4-door models!      

Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-

Adapter with RAM mount ball (1” size B) for mounting on the passenger grab handle For orders to the USA please contact seriesdefender.comand for orders to Canada rovalution.ca/

Lifting kit +50 mm rear axle or front axle - suitable for Land Rover Discovery II (with air-sprung rear axle) More ground clearance, better off-road capability, striking look - with our lift kit for the rear axle (+50 mm) you get the full off-road potential out of your Discovery II.Lift kit for the rear axle with air suspensionThis lift kit is specially designed for the Land Rover Discovery 2 with standard air suspension on the rear axle.By fitting the supplied spacers, the ground clearance is significantly improved and more clearance is created between the tyres and body - ideal for off-road use or larger tyres.The standard air suspension remains fully intact, including automatic levelling. This kit is therefore the ideal solution for a reliable 2-inch lift on the rear axle.Perfectly combinable with the matching front axle kit - without additional adjustments to the air suspension system.All the necessary components are included in the scope of delivery - ready to install and uncomplicated.Lifting kit for the front axleThis kit enables the front axle on the Discovery 2 to be raised if air suspension is still used on the rear axle.It ensures a balanced vehicle level after raising the rear axle and increases both the ground clearance and the wheel arch clearance on the front axle.Ideal in combination with the rear air suspension lift kit - together they create a harmonious 2-inch vehicle lift without impairing the function of the standard air suspension.Supplied complete with all necessary components - ready to install and without additional modifications.Please select the desired variant front and / or rear axle.

Spring cones rear axle suitable for Defender 110/130 Spring cones return the spring "cleanly" when the travel of the shocks is longer than that of the springs, Spring cones fit original springs or Trekfinder springs. Whether this item fits with other accessory springs must be checked on a case-by-case basis due to the possibly thicker wire.Not suitable if additional springs are used. Scope of delivery: 1 pair

Repair kit for the homokinet on the front axle suitable for TDi / TD5 / TD4 till MY2016 with and without ABS Scope of delivery: 1 pc (for 1 bike!) We recommend an exchange on both sides!If you have a car with 10 splines it wont fit, change from 10 splines to 24 splines should be on MY1994 round about. 

Side access step for Defender This side step makes it easier for you to access your vehicle doors. You can attach the step to both the front and rear side doors.  If required, the step can be easily folded away. Suitable for all Defener models!You can find a suitable crossbar here.

Upgrade rear door damper for Suzuki Jimny 2 GJ/HJ Rear doors on off-road vehicles have to be heavyweight athletes, as they often carry spare wheels and other equipment. Especially when the vehicle is parked on uneven surfaces, opening tailgates – or keeping them open – can be a difficult and heavy task.For the Suzuki Jimny 2 (from model year 2018), we offer an easy-to-fit plug & play solution that does not require any modifications to the vehicle itself. The replacement damper for the rear door is calibrated to an opening angle of approximately 3. That means once you’ve pulled the handle and opened the door to that angle, the damper automatically and gently pushes the door fully open and keeps it in position – even when you’re parked at an angle on slopes or in off-road terrain. Another advantage of the heavy duty damper is the wider opening angle (slightly over 90°) when compared to the original part.

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.