Shop by vehicle

Bright, white light with minimal power consumption and a long service life - LED soffits make it possible! LED soffits for the Defender - Simple. Fast. Impressive. Do you love your Defender, but the interior lighting leaves a lot to be desired? With our new LED soffit, you can bring the latest lighting technology into your vehicle - and it's plug & play! The durable and vibration-resistant 39 mm LED soffit is a direct replacement for the bulb in the standard interior light(s) in the Land Rover Defender 90/110/130. Why an LED soffit? Our LED soffit has been designed to give you brighter, more efficient and stylish lighting. It's a perfect upgrade. Plug&Play - It couldn't be easier! No long installations, no tangled cables, no specialist knowledge required! Our LED soffit can be installed in just a few minutes. Simply remove the existing interior light, plug in the LED soffit and you're done. The plug & play system makes it possible - even for beginners. Advantages at a glance: Bright, uniform illumination: Thanks to state-of-the-art LED technology, the base centre provides pleasant, bright lighting in the interior.Daylight white; light colour 6000 KelvinVoltage: 12 V Energy-efficient: LEDs consume less power than conventional light bulbs, saving your Defender's battery. Durable: LEDs have a significantly longer service life and are resistant to vibrations and shocks. Easy installation: No workshop required - you can install the Soffitte yourself in just a few minutes.Ready to install - plug & play   Who is the LED soffit suitable for? Our LED soffit is the perfect solution for all Defender fans. It is suitable for the Defender 90 as well as for the Defender 110 and 130.  Please observe the polarity when installing! Scope of delivery: 1 piece  

Switchboard PROFI 2 for Cubbybox New control panel Cubbybox Land Rover Defender made of high quality aluminium with 3 Profi switches with green LED lighting, circuit breaker and voltmeter for independent testing of 2 different batteries, cigarette lighter with socket, rubber cover and fuse, 190 x 132 mm.

Nakatanenga rim reinforcement for splash guard holder Edge reinforcement for splash guard holder, for Land Rover Defender 110.Dimensions of a single edge reinforcement: 10 x 2.3 cm. Supplied in pairs.

Only the most hardened purists would welcome a return to the times before central locking. Let’s be honest, we’ve all become too spoiled. A Landy with central locking is better than one without. Our replacement case for the key fob is meant to replace the original one when the the buttons are faulty or the shell too worn out from use. Simply install the electronics from the original remote in the new key fob case and attach to your key ring. New programming is not required. Suitable for Land Rover Defender with separate remote control, incl battery CR2032. Except for remote controls with the following form:

Replacement cup holder for Cubby Box. If your cup holder of your Cubby Box breaks, the cup holder is available as a spare part from us. 0.5 l drinks bottles and coffee cups fit perfectly into the practical cup holder. Also ideal for self-made center consoles. 

Suzuki Jimny GJ / HJ Adapter cable PS13W to Superseal 3-pin Hard-working 4x4s like the Suzuki Jimny GJ / HJ benefit greatly from partial or complete conversion to LED lamps and lights: as a rule, LEDs tend to shine brighter while using less energy, are not as prone to failure and last longer than bulbs. If you want to customize your Jimny GJ / HJ with combined LED daytime running and fog lights, e.g. Nolden 90 mm LEDs, you will need 2-pin PS13W socket to 3-pin AMP-Superseal plug adapter cables to connect the daytime lights. The fog lamps are plug & play. The complete installation kit consisting of two adapter cables and one pair of Nolden LED daytime running/fog lights in chrome housing can be found here. Adapter:2-pin PS13W socket to 3-pin AMP-Superseal plug.

Where to go with all the little things in the vehicle? There is more storage space here! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle. The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, ballpoint pens, notepad, small flashlight, multitool etc. The organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Integrated zipped pocket and MOLLE loops. Width of the organizer is 290 mm. Material: 100% nylon The Nakatanenga sun visor organizer is available in different colors: green-brown coyote sand Universally applicable for all vehicles! You can find the Nakatanenga card holder here. You can find the matching mirror for the organizer here.

Optional safety mounting kit for the Nakatangena window grilles for the Land Rover Defender 90/110 Consisting of:Blind rivet insert nuts, safety torx screws and matching bit Kit for one window grille    

Robust hinge pins for ventilation flaps Suitable for all Defender up to MY 2007Material: Stainless steelThe set consists of 4 bolts and 10 nuts (incl. 2 spare nuts).Please note: This set is not included in our stainless steel bolt set!

Washer pump including grommet Suitable for Land Rover Defender MY 87-98 without air conditioning

Plastic expanding rivets, black Plastic dowels for door panels and mudguard extensions for Land Rover Defender

Connector / mating connector for Land Rover Defender switch OEM Style Suitable connector / mating connector for switch YUG000540LNF / YUF500150LNF / YUG102440 or our OEM style switches Scope of delivery: connector incl. contacts As spare part for our switches: Switches for Land Rover Defender & Discovery Switch with bezel for Land Rover Defender & Discovery Land Rover Defender OEM switch auxiliary headlights

TREKFINDER Fuel filler cap cover for Land Rover Defender The recessed fuel tank cavity is a typical Defender detail, dating back to very different times. Today’s average drivers would probably shake their heads in disapproval, but Landy enthusiasts will cherish the excentricity and immediately set their minds to fixing the design’s obvious short-comings with a little Defender hack. For a long time, we had been able to offer one of those nifty little fixes under the product name Defendoor, made by a Czech company.Sadly, both the company and their fabulous product are no longer in existence, but since we still register a lot of demand for fueling cavity covers, we got together with Defender specialists TREKFINDER and breathed new life into the idea.The cover is as simple as it is effective when it comes to keeping out water, snow, ice, salt, spray, mud and dust. It will also add to the rugged good looks of your Defender. Made from sturdy but slightly flexible high-quality synthetics, it is kept in position by a groove running around the sides. There is no need for screws or rivets or moving parts to hold it securely in place. When fueling, simply press the cover in and remove it from the fueling cavity. The material is UV- and temperature-resistant, guaranteeing long product life and long-lasting quality. The cover fits:Defender 110 up until MY2016Defender 90 from 1998 to 2016 Does NOT fit:110 HCPU and 130 HCPU90 until MY 1997

Perfect mounting on the vehicle - antenna holder for the bumper The Nakatanenga antenna holder allows easy mounting of an antenna on the OEM bumper of the Land Rover Defender 90/110/130, making it easy to attach a CB or amateur radio antenna. The holder is made of stainless steel.

Repair kit for fuel cooler The repair kit for the fuel cooler consists of 4 rubber rings which ensure a secure seal. Suitable for the fuel cooler PIB000060 (see illustration) of the Defender Td5 and the Discovery II.

Power screwdriver bit 1/2 inch with plastic sheath, to protect the rim Features: Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m) Material: Chrome molybdenum steel (Cr-Mo), forged and hardened Suitable for impact wrench and torque wrench !

Fuel filter mounting set - Defender Practical mounting set for secure mounting of the fuel filter on the Land Rover Defender. Ideal as a replacement for defective brackets or for conversions. Robust quality, perfect fit for various Defender models.

Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.

Ignition Switch Clamp – Land Rover Defender (MY 1986–2007)   High-quality clamp for secure mounting of the ignition switch to the steering column. Fits all Defender models from 1986 to 2007, including TD4. A reliable replacement – built to withstand even tough off-road conditions.You can also find the steering column lock with three door lock cylinders or the matching shear bolt to match the clamp in the shop

Ideal for repair and interior installation The set contains different fixings to attach the interior door trim on Land Rover Defender vehicles. One set contains enough fixings for one side door.

Secure hold on rock sliders – especially for Defender & Grenadier These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.

Precisely fitting anti-slip pads for skirt sliders on the Mercedes G-Class These self-adhesive anti-slip pads have been specially developed for the skirt sliders from Abenteuer 4x4 for the Mercedes G-Class. The cut-outs are precisely matched to the hole pattern of the G-Class skirt sliders. They significantly improve the already robust anti-slip properties of the side protection, especially in wet, muddy or snowy conditions.   The pads are supplied in pairs and measure 5.5 x 50 cm - ideal for the entrance area at the doors. If required, additional pads can also be used to completely cover larger areas of the Rockslider. This not only enhances the function, but also the look.Supplied in pairs, one pad each for the left and right side.

Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.

Secure grip on the loading sill – perfectly tailored for the Land Rover New Defender This upgrade for the Land Rover New Defender (L663, from MY2020) is so discreet,  it’s barely noticeable at all. Even so, it has a big impact, especially in damp or wet conditions. With our custom-made anti-slip pads, the rear bumper becomes a safe climbing step to access roof rack or roof load. No more slipping on a greasy bumper or due to muddy boots.   The 24x13cm (each) sized pads for the corners of the bumper have a robust, abrasion-resistant anti-slip coating on top and a self-adhesive strip on the underside. The material originates in the sports equipment sector and has a proven track record in skateboarding, among other things. The pads’ perfect fit and matte black look, compliments the look of the new Defender perfectly.   Supplied in pairs.  

LOF Clutches Clutch Alignment Tool This tool enables you to correctly align clutch discs in most Land Rover models. The alignment tool is CNC machined from black Nylon and will suit TDI, TDCI Puma, TD5, 2.25 and all 4-cylinder engines on Series I - III.

Front Panel for your Nakatanenga Valuables Compartment 2012 – Customize it to your liking Do you own a Nakatanenga valuables compartment from 2012 or later and need a new or simply a different front panel? Then you've come to the right place! This perfectly fitting front panel is specially designed for the Nakatanenga valuables compartment model year 2012. Whether your old panel has been damaged or you simply want to convert your compartment for new requirements – with this front panel, your valuables compartment will be ready for use and securely locked in no time. The front panels are made of robust aluminium and are black powder-coated, making them particularly resistant for off-road use. Depending on your needs, you can choose different versions, for example with cutouts for two sockets (USB or 12V), for three switches, a combination of both, or completely without cutouts if you want to install your own components. This allows you to flexibly adapt your valuables compartment to your individual needs without having to replace the entire compartment. Get the right front panel now and ensure that your valuables are perfectly protected on your adventures! The following models are available: Front panel with cutouts for two sockets (USB or 12V) Front panel with cutouts for two sockets (USB or 12V) and three switches Front panel with cutouts for 3 switches Front panel without cutouts

Spring Spacer Ring/ Trim Packer/ Lifting Ring TREKFINDER for SUZUKI Jimny I & II + 10 Millimeter in colour red - for levelling at the front or/and rear axle. Suitable for all Jimny models at the front and rear axle: Jimny II type GJ & HJ as of MY 2018 Jimny I type FJ until MY 2018 for the front axle spring for the rear axle spring 10 millimetre height adjustment SCOPE OF DELIVERY: 1 piece TREKFINDER polyurethane spring distance ring with marking TREKFINDER logo + FDR10 in colour red. NOTE: The spacer rings are listed in the TÜV® parts certificate for our TREKFINDER Jimny II complete suspension 40 mm and Jimny I suspension 55 mm and can therefore be optionally installed 1x per spring.A general TÜV® parts certificate is not available or is NOT included in the scope of delivery. MOUNTING INSTRUCTIONS: The installation is carried out between the upper end of the spring and the spring plate. Make sure that the brake line is long enough Make sure that the shock absorber is long enough. Check the headlight setting. The permissible height of the coupling ball must be observed. If there is a load-dependent headlight adjustment, e.g. for LED lights, this must be checked and, if necessary, adjusted or changed/extended. If a new measurement or calibration of the sensors of the driver assistance system is necessary due to the changed vehicle geometry of the vehicle, this must be carried out according to the specifications of the vehicle manufacturer. For vehicles with load-dependent brake pressure regulator, this must be readjusted to the empty level (according to the vehicle manufacturer's specifications). After retrofitting, the axle geometry of the vehicle must be measured and, if necessary, corrected according to the vehicle manufacturer's specifications.

AGR/EGR- closure plate for either the Td5- (- MY02) or the Tdi-engine, to eliminate exhaust gas recirculation. Comes with the necessary bolts. Motorsportequipment, not certified for road use.

LOF Clutches Centring Tool This clutch centring pin from LOF Clutches is used to correctly align clutch discs on all ROVER V8 applications with 549991 spigot bush. Made from CNC machined plastic, the clutch arbor fits vehicles with the following engine options: SKU: V8-CAT Categories: Land Rover Series Clutches, Clutch Parts, Land Rover Defender Clutches, Land Rover Discovery Clutches, Range Rover Clutches Tags: 1.6L/2.0L Clutches, 2.25 (Petrol/Diesel) Clutches, 2.8 tgv Clutches, 200/300 Tdi Clutches, Td5 Clutches, TDCI (2.4/2.2L) Clutches 

Plastic hub cap set of 4 WITHOUT LR-LOGO - Suitable for Discovery 1 1989-1998, all Defender and Range Rover Classic Scope of delivery: 4 pieces

Axle stop rubber for Land Rover Defender up to BJ 2016 Specification: Category: Axles and Suspension Engines: All Fuel: Diesel, Petrol Premium range: ANR4188G: Yes / ANR4189: No Transmission: Manual, Automatic Specification NAS - North American Specification, NOT-NAS - Non North American Specification Quality rating: 100 Drive Type: Drive Wheel 2WD - Two Wheel Drive, 4WD - Four Wheel Drive Fits DEFENDER 1986 - 2006, DEFENDER 2007 AFTER, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC.

Switch covers OEM Style for Land Rover Defender and Discovery Extend your vehicle console with additional switches in OEM style. Please select the desired variant. Without switch