Shop by vehicle

Front floor mounting set, stainless steel for Land Rover Defender Stainless steel fastening set for floor panels in the front footwell, for Land Rover Defender Fastening set includes the parts for driver and passenger side.Ideal for Nakatanenga storage compartment footwell - Land Rover Defender. You can find the right mounting kit here for securing the floor panels in the footwell of the second row of seats.

Beam wiper blades for the New Defender Looking for replacement wiper blades for the windscreen of your New Defender? Then we definitely have a recommendation for you. These wipers from VALEO deliver exactly what their name suggests: Silencio! And it's not just VALEO’s marketing department – a French global automotive supplier – that says so, because we've tested them ourselves, thoroughly. When you buy VALEO Silencio, you are guaranteed top European quality in terms of materials, workmanship and accuracy of fit. This combination ensures excellent wiping performance over the entire surface without jerking or rubbing and also - as the name Silencio promises - extremely quiet operation.   VALEO uses VisioRubber, a rubber technology that combines the best properties of natural double density rubber with synthetic exterior coating. In our own tests, we experienced far superior efficiency and very quiet wiping without squeaking or smearing. In our opinion, the trade-off with a comparatively shorter service life of these wiper blades is of little consequence given the impressive advantages.    As with all quality wipers, the installation is uncomplicated. Fits all variants of the New Defender (MY 2020). Set includes two wiper blades.Product size 55x2x3cm  

Spare parts set for clutch pedal - Defender Practical spare parts set for the clutch pedal of your Land Rover Defender. Contains two bushes and a bearing - ideal as a replacement for worn clutch spring components. Precisely fitting and durable for reliable pedal function.Spare parts for clutch spring, set consisting of: 2x bushing and 1x bearing

Replacement filter for diesel replacement pump For Land Rover Defender.Replacement filter for our replacement diesel pump, original Mann quality filter.

Our LED licence plate light for Land Rover Defender 90/110/130 looks like the original item with all the benefits of LED technology: whiter and brighter than halogen bulbs little current drain (only 0.5 W), generates little heat insensitive to vibrations, especially interesting for diesel powered cars! superior longevity large voltage range - 9-33 V The light is E-marked for legal use (corresponding to ECE regulation no. 4). It's water and dustresistant to IP67 and is fitted using the existing M5 screws. All fittign material is supplied, so fitting only takes a few minutes.

High-strength turbo charger to manifold sealing gasket for Land Rover Defender Td4 / Tdci / Puma - special alloy.

High-quality light switch for Land Rover Defender Td5/Td4 Discover our high-quality light switch for the Land Rover Defender Td5/Td4. This suitable replacement is compatible with all models from VIN VA104806 to EA999999 and ensures reliable lighting control in your vehicle. Perfectly matched to your Defender, the switch offers easy installation and long-lasting quality. Rely on our solution to maintain and improve the functionality of your vehicle.    

Sun visor mirror for Land Rover Defender The self-adhesive make-up mirror for the standard sun visor of the Land Rover Defender 90/110/130 can be mounted on two different places of the sun visor - see pictures.The mirror is available for either the left or right side of the vehicle and is sold individually. Supplied without sun visor.

Land Rover Defender Glazing Rubber - Windscreen Gasket LR056278 A replacement rubber seal for the windscreen glazing. High quality spare part - Fits models MY 1987-2016  Windscreen, green tinted and heated for Defender up to MY 2016 you will find HERE in our Shop Windscreen, green tinted for all Defender 90/110 you will find HERE in our Shop  

Rubber protective cap for tie rod end Suitable for: Series I, Series II, Series III, Defender 90, Defender 110, Discovery 1, Range Rover Classic Land Rover Comparison Numbers:RTC5869QHRTC5868DRTC5870QH This PU version has better chemical and mechanical resistance than the conventional rubber dust cap.The service life is thus significantly increased by the material used.

Replacement switch for ignition lock The ignition lock switch can often cause problems. If it is defective, you will not be able to start the vehicle. Many people immediately replace the entire ignition switch, but if the ignition switch's turning mechanism is still working properly, it is much cheaper to replace the ignition switch located at the rear of the ignition switch. In this case, this item is the ideal replacement or repair part.

Convenient retrofitting Do you want to make reversing safer with your Landy? For all Defenders from 1998 onwards, our Y-cable adapter makes it very easy to install an additional reverse light. No extra cables or switches required. The two-pronged piggyback cable supplies both the original and the additional light with power. Once you shift into reverse, both lights will come on. All connection materials are included.  

Fits all MY - TDi, TD5, TD4 2.4, TD4 2.2 with original-bumper Full bolt kit for one bumper - stainless steel bolts for Defender 90/110/130, comes with assembly paste. Do not use in conjunction with a winch or clevis pin bumper!  

Rear axle spacers - 10 mm for Land Rover Defender These 10 mm spacers for the rear axle improve the track width and handling of your Land Rover Defender.Optionally suitable for Defender 90 or Defender 110/130, supplied in pairs. Registration is only possible by individual approval possible.Please select the appropriate wheelbase for your vehicle.

Pilot bearing / Guide bearing for all Defender TD4 models (MY 2007-2016) We recommend replacing the pilot bearing when replacing the clutch.

Bracket for double damper system - rear axle Maximum control, double damping: with this bracket for a double damper system on the rear axle, you can equip your vehicle for maximum loads and demanding off-road use. Supplied in pairs

Land Rover Windscreen Wiper Arm Part for Defender 90/ 110/ 130 year of construction 2001-2016

Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.

Impact wrench socket 1/2", long, 27mm Power socket for changing wheels on the Land Rover Defender.

High-quality stainless steel brake pistons for Land Rover vehicles - 46.0 x 30.8 mm Stainless steel brake pistons 46.0 x 30.8 mm, for various Land Rover vehicles, please measure which brake pistons you need! The brake pistons are made of stainless steel and therefore do not rust. These are quality products manufactured for us in the EU, which have a significantly higher material hardness than cheaper products from other suppliers.   Scope of delivery: 1 piece

High-quality stainless steel brake pistons for Land Rover vehicles - 41.2 x 28.4 mm Stainless steel brake pistons 41.2 x 28.4 mm, for various Land Rover vehicles, please measure which brake pistons you need! The brake pistons are made of stainless steel and therefore no longer rust. These are quality products manufactured for us in the EU, which have a significantly higher material hardness than cheaper products from other suppliers.   Scope of delivery: 1 piece

Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.

High-quality side bearing  New side bearings are required when installing a differential lock (Detroit Locker or TrueTrac) if your vehicle has a P38 or Rover axle. Not required for the Salisbury axle. Please order this item twice. We obtain the side bearings from brand manufacturers such as Timken.

Air scoop, for Land Rover Defender 90/110/130 right or left side, for adhesive, rivet or screw mounting. Material: steel, black

Expanding & plastic nuts for Land Rover Expanding nuts / plastic nuts for the body of Land Rover. Please note that the color may vary.

Silencer / Spacer f. height compensation (P38 or Salisbury axle)  Description:  the item can be used on the rear axle on 110s and 130s.  optimal possibility for level compensation/ the height adjustment is 10 millimetres the ring consists of a zinc, phosphated metal ring with coil spring centring and vulcanised NR/ SBR rubber the rubberised surface of the ring reduces the transmission of vibration noise the washer is placed between the spring end and the spring plate, max. one washer per spring end is possible, i.e. max. two washers per spring, i.e. max. 20 mm height increase per spring is possible price per unit

Rubber mount for Koni / Trekfinder RAID shock absorber top 90-5375SP1 + 90-5471 suitable for all years of construction! Scope of delivery: 1 piece

FLYWHEEL-LOCKING-TOOL This flywheel locking tool by LOF Clutches suits all Defender and Discovery TD5 models from 1998 – 2006, for both solid and dual mass flywheels. The tool locks the flywheel in place allowing the removal and torqueing of the TD5 flywheel bolts when changing the dual mass flywheel and the crank seal. A really handy bit of kit to keep in the toolbox. 

Ignition Switch Clamp – Land Rover Defender (MY 1986–2007)   High-quality clamp for secure mounting of the ignition switch to the steering column. Fits all Defender models from 1986 to 2007, including TD4. A reliable replacement – built to withstand even tough off-road conditions.You can also find the steering column lock with three door lock cylinders or the matching shear bolt to match the clamp in the shop

Spacers for front axle stabilizer The spacers are used to lower the stabilizer so that there is enough space for a cardan shaft with double joint. The spacers lower the stabilizer 1 cm. For Defender 90/110/130 from TDI. Dimensions per piece: 12x4x1 cm Scope of delivery:1 pair

Screw set bonnet Land Rover Defender optionally for Tdi /Td5 and for Td4   Defender bonnet screw set includes 2 front bumper screws, six stainless steel hinge screws with washers and nuts and two plastic hinge bushes   The screws are supplied as hex socket screws. 

Fitting Kit Headlight for Land Rover Defender, stainless steel Fitting kit for one headlight for Land Rover Defender, consisting of stainless steel screws and anti-seize paste.