Shop by vehicle

New intake manifold gasket for Defender TD4 2.4 High-quality replacement gasket suitable for the intake manifold of the Land Rover Defender TD4 with 2.4 litre engine. For optimum sealing and reliable engine performance - ideal for maintenance or repair.

High-quality leather steering wheel cover - especially for MOMO steering wheel in the Defender Centre boss cover with original Land Rover badge for MOMO steering wheel, suitable for Land Rover Defender 90/110/130, made from genuine leather for superior feel and decorative stitching. Replaces the horn boss. Available in different colours. Comes with one set of stainless steel screws and one set of black screws. The steering wheel pictured is not included and is only shown for illustration. Different models available, please choose.

Cover for RAID sports steering wheel made from high-quality leather Centre boss cover with original Land Rover badge for RAID racing steering wheel, suitable for Land Rover Defender 90/110/130, made from genuine leather for superior feel and decorative stitching. Replaces the horn boss. Available in different colours. Comes with one set of stainless steel screws and one set of black screws. The steering wheel pictured is not included and is only shown for illustration. Different models available, please choose.You can find a version for MOMO steering wheels here.

Expanding & plastic nuts for Land Rover Expanding nuts / plastic nuts for the body of Land Rover. Please note that the color may vary.

High quality Castrol axle oil - For Discovery 3 & 4 differentials This fully synthetic axle drive oil with LS (limited slip) additives is designed for use in highly loaded axle drives and multi-plate limited slip differentials. 2 litres Suitable for Discovery 3 & 4. Advantages: long oil change intervals thanks to excellent shear stability best wear protection at highest load profiles excellent cold flow behaviour reduced gear noise due to minimised vibrations Storage: oil should be stored under cover if possible. in the case of unprotected storage outdoors without a roof, the oil should be stored horizontally to prevent water penetration and to maintain the legibility of the labelling. do not store at temperatures above 60 °C avoid direct sunlight or frost

Lockable tank cap When fuel prices are high, opportunistic fuel thefts skyrocket and this affects us both at home and when traveling abroad. Furthermore - especially in our cities - SUVs and 4x4s are preferred targets for sabotage and vandalism by supposed climate activists and other thugs. Under these circumstances, it is hard to understand why high-priced cars such as the New Defender (from MY2020) do not come with lockable fuel filler caps. If you want to prevent thieves and saboteurs from gaining easy access to your fuel tank, we offer a lockable replacement cap with two keys. In addition to the New Defender, this lockable fuel cap fits the following models: Discovery 3 MY2004-2009Discovery 4 MY2009-2016Discovery5 from MY2014Discovery Sport Typ LC ab BJ2015 Range Rover (not Vogue) from MY2007Range Rover Evoque L538 MY2011-2018Range Rover Hybrid L405 from MY2013Ranger Rover Sport from MY2007Range Rover Velar from MY2017 Defender from MY2020 Jaguar E-Pace X540 from MY2017Jaguar F-Pace X761 from MY2016Jaguar F-Type (not USA) X152 from MY2013Jaguar XE from MY2015Jaguar XF from MY2007Jaguar XJ X351 MY2010-2019Jaguar XK Cabrio from MY2006Jaguar XK Coupe from MY2006

Drive Shaft Spacer Compensates for height adjustment.Ships including hardware.

Mounting bracket suitable for injectors - Defender TD4 2.2 / 2.4 from MY2007 onwards suitable screws for mounting can be found here in the store

Door lock knob – Land Rover Defender – aluminium, silver anodised Give your Defender a high-quality detail upgrade: this door lock knob is made of aluminium and is silver anodised – for an elegant look and a robust surface. Ideal as a replacement or upgrade for worn original parts.   Scope of delivery: 1 piece

Mounting kit for centre and rear silencer Land Rover Defender TD5 90/110 The mounting kit allows easy mounting of the middle and rear silencer for the Land Rover Defender TD5.The kit includes 2 gaskets, 2 washers, 3 rubbers, 2 washers, 1 bolt, 1 nut.

Set for overhauling the starter motor of the Defender Discovery Td5 In 99 per cent of all the cases that a Td5 starter is replaced it is not the actual motor itself, but the magnetic switch that is broken. Often its contacts are burned or worn, which still allows the starter to spin, but without the engine starting or only starting very reluctantly. For these cases we offer a cost-effective solution: with our service kit you can overhaul your starter yourself for a fraction of the price for a new OE starter (more than EUR 400,-). This is an easy DIY job without the need for special tools or expertise. Note: our starter service kit is not available at the manufacturers DENSO or Land Rover! In contrast to many cheap offers, ONLY WE offer a complete kit with all necessery parts as well as enlarged and strengthened contact plates.

Mounting material for 1 piece KONI/ TREKFINDER Heavy Track RAID damper 90-5374SP1 + 90-5470, top and bottom Mounting material for the pin mounting of the shock absorber on both sides Suitable for all LAND ROVER Defender models Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces nut self-locking

Wheel nut cover for Land Rover Defender Wheel nut cover, black, for Land Rover Defender, 25 pieces, SW27, made of high quality plastic.

Nakatanenga splash guard for Land Rover Defender, fender front axle On the Land Rover Defender, a meticulous MOT inspector may deem the wheel cover on the front axle mudguard to be inadequate. This can happen if one or more of these factors are present:    larger tires    wider tires    bumper with optimized slope angle (our NAWIBU2 or XHD for example)    higher suspensionFor this reason, we have developed a splash guard for temporary or permanent installation that solves this problem and restores the necessary wheel coverage.Scope of delivery: 1 pair

License plate holder for NAWIBU winch bumper Our heavy duty Nakatanenga winching bumper for classic Defenders is the perfect mounting solution for winches. The entire winching unit stays well protected behind the bumper and the winching cable runs smoothly through the integrated winch window in the middle of the bumper. Normally, this is where the license plate is positioned and that brings us to the problem and our simultaneously elegant and quick solution. Our custom made number plate holder is simply screwed into the fastening holes of the winching window, making it possible to mount the number plate more or less in its usual position. The winch’s functionality is in no way restricted or impeded, of course. The number plate holder is made from aluminum and features a matte black powder coating (RAL9005) which perfectly matches the look of the winching bumper. Material: AluminumFinish: RAL9005 matte smooth

Clear Vision in Any Weather: Continental Flat Blade Wipers for Your Defender! You know the drill: rain, snow, or spray – and your old windshield wipers smear more than they wipe? Especially in a Defender, where good visibility over rough terrain is crucial, you shouldn't make any compromises. Upgrade now to modern Continental flat blade wipers and experience the difference! This set is a perfect fit for your Land Rover Defender and brings the technology of modern vehicles directly to your windshield. Here's what the Continental Flat Blade Wipers offer you: Superior Wiping Performance: Thanks to the aerodynamic design and even pressure distribution, flat blade wipers provide a significantly cleaner and streak-free wiping result – even at higher speeds. Longer Durability: Flat blade wipers are often more resistant to weather influences and wear than conventional bracket wipers. Modern Look: Give your Defender a subtle yet modern touch. Less Wind Noise: The flat design can reduce wind noise compared to bulky standard wipers. Easy Installation: Changing them is child's play and done quickly. Old wipers off, new Continental wipers on – done! Complete set: The set consists of either two or three identical wipers for the windscreen and rear window of your Land Rover Defender 90/110/130. No more poor visibility and annoying juddering! Treat yourself and your Defender to an upgrade that you'll immediately appreciate on your next rainy drive. Ensure clear vision and safety! Order your set of Continental Flat Blade Wipers now!

Oil seal crankshaft rear Fits DEFENDER 2007 and later.

Finally, Easier Clutch Operation: The Nakatanenga Clutch Spring for Your Defender! It's easy to forget these days, but driving used to be real work, and you don't even have to go back as far as double-clutching or hand-cranking the engine to start. Over the decades, many things in the Defender have become more user-friendly: power steering and electric windows take the strain off your arms, but especially with the TD5 and older models, it's often still the case that your clutch leg needs to be significantly stronger than your accelerator foot. Particularly in the low-range gears off-road, when maneuvering with a trailer, or even in stop-and-go city traffic, the physical effort of pressing the clutch pedal quickly becomes noticeable. As an ergonomic and cost-effective solution to this annoying problem, we now offer a new torsion spring that reduces the effort required for clutching by up to 45% compared to original return springs. The new spring can be installed in 300Tdi, Td5, and Td4 models. The necessary bushings are supplied. The conversion at the clutch pedal also works on models older than those mentioned above if retrofitting with a newer pedal box is possible. We are, of course, happy to help with any questions regarding this. These are your advantages at a glance: Noticeably Lighter Clutch Operation: Reduces the required pedal force and makes clutching significantly more pleasant – a difference you'll notice immediately! More Driving Comfort: Relieve strain on your left leg, especially in stop-and-go traffic, off-road, or on extended journeys. Easy Installation: The spring is designed so that it can be relatively easily exchanged for the original spring. Perfect Fit for Your Defender: Developed for Land Rover Defender models (please note compatibility with your exact model year and type, especially for 300 Tdi, Td5, Td4 2.4 & 2.2). Small Change, Big Impact: An often-underestimated modification that can significantly improve everyday driving with your Defender. Many Defender drivers swear by this simple yet effective optimization. If you desire more comfort when clutching without changing the fundamental characteristics of your vehicle, this spring is the ideal solution. Give your left foot a break! Order the Nakatanenga Clutch Spring now and experience a new level of shifting comfort in your Defender! If you're looking for a technically more sophisticated solution with even greater force reduction, you should take a look at our POWERmaster master cylinder for the clutch hydraulics here. You can find bearings and bushings as spare parts here.      

Spare gasket set 4 pcs. for Aschcroft MT82 intermediate shaft 2 pieces precision O-ring 43,82 x 5,33mm2 pieces precision O-ring 75 x 2mm

Stainless Steel Front A/C Panel Mounting Kit, for Land Rover Defender. Machine cut and CNC pressed for accuracy. Ready to bolt on. Set consists of: 4 x No8 x 16 mm A2 Pz2 bolts.2 x A4-70 No14 x 25 mm stainless steel Pz3 bolts4 x M5 A4 washers2 x M6 A4 washers2 x M8 A4-80 x 20 mm hex head screws2 x M8 A4 washers4 x No6 plastic lock nuts2 x No14 captive U-nuts2 x M8 A2/304 captive nuts Note - A4-80 is the equivalent of high strength mild steel 8.8 bolts

Wheel bearing nut 52 mm for Land Rover Defender

 LED - rear fog light Product information:    LED-LIGHT    Code: PRC7254LED    Rear fog lightVehicles:    Defender - 1987 - 2002    Series III

LED - Reversing light Product information:     LED-LIGHT    PRC7263LED    Reversing lightVehicle:    Defender - 1987 - 2006    Series III

Windscreen wiper relay - Land Rover Defender Replacement relay for the windscreen wiper of the Land Rover Defender. Suitable for various model years, ensures reliable control of the wiper intervals. Simple replacement, close to OEM design.

Switch Mounts for Hazard Lights & Window Controls – Land Rover Defender Give your dashboard a clean, factory-style appearance with our high-quality switch mounts!Hazard Light Switch MountPerfect for TD4/TD5 Defenders upgrading to a double-DIN dashboard, this mount allows for a seamless relocation of the hazard switch. In base-model Defenders with fewer switches, only the hazard switch often needs repositioning—this mount ensures a neat and functional installation.Power Window Switch MountThis bracket allows you to relocate factory power window switches to a new position on the dashboard. Ideal for retrofits – enables installation of factory switches in older Defender models Flush-fit design – recessed mounting ensures a smooth, seamless dashboard look Easy plug-in installation Note: Switches not included. You will receive the Adpter frame for a hazard warning light or window regulator switch. Switch and cover are NOT included in the scope of delivery.

Air intake cover for all Land Rover Defender models (Tdi, Td5, Td4 2.4 and 2.2), set of 3, made of 2 mm aluminium to replace the plastic covers. Powder coated, comes with stainless steel fittings. Image similar

Leather door loops Suitable for Land Rover Defender and other makes - put an end to ugly plastic handles that pinch your leg all the time! Leather straps, inner, with stainless end-covers, made of black or brown (cognac) saddle leather with white stitching, hand-made. Sold as pairs, with high-quality stainless steel screws. Please select the colour of your choice.

Bolt set for flywheel LR116372 This high-quality bolt set for flywheel LR116372 contains all the fastening bolts required for professional and secure installation.   Lieferumfang Set: 8 Stück Schrauben

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Side mirror with arm for Land Rover Defender 90/110/130 Suitable for all model years, also Series III, if later hinges have been retrofitted. Fits driver and passenger side. Measures mirror: approx. 140x200 mmLength arm: approx. 140 mm

Bumper mounting kit - Land Rover Defender The mounting kit is specially designed for mounting the bumper on the Land Rover Defender. It contains all the necessary fasteners for secure and precise installation and is ideal for repairs or replacing original screw connections.

Mounting rings for speakers - suitable for Land Rover Defender Better sound quality, perfect fit: With these mounting rings, you can install new speakers quickly and cleanly in your Land Rover Defender - without any DIY solutions or improvisation. For easy installation of 100 mm or 130 mm speakers in the Land Rover Defender, either flat (16 mm) or deep (27 mm) design. Scope of delivery: 1 pair