Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.  

Gasket set for Alpine windows for Defender from MY1990 to 2016 Usually suitable for Defender from MY1990 onwards here the 4mm thick window was installed ex works (the thicker window with 5mm was usually only installed on series and Defender up to MY1990). If you are unsure, measure the thickness of the disc. Scope of delivery: 1 piece gasket for Alpine window 1 piece filler strip for Alpine window

Heater Engine Resistor OEM Land Rover Series III Triumph GT6 TR4 TR6Reference number 7H6926.

Land Rover Defender Glazing Rubber - Windscreen Gasket LR056278 A replacement rubber seal for the windscreen glazing. High quality spare part - Fits models MY 1987-2016  Windscreen, green tinted and heated for Defender up to MY 2016 you will find HERE in our Shop Windscreen, green tinted for all Defender 90/110 you will find HERE in our Shop  

Parabolic springs for 88" and 109", Land Rover Series II, IIA and III, front (2-layer) and rear axle (3-layer); including Cellular Dynamic shock absorbers Basically, a parabolic spring is a spring that consists of two or more leaves. The leaves only touch in three places: In the centre, where they are attached to the axle, and at the outer ends, where they are attached to the vehicle. Between these points, the leaves do not touch, unlike conventional leaf springs.Since in the Parabolic spring a spring tapers from the wide centre to the outer ends, a single leaf acts like a complete spring - the thickness of the spring changes according to a parabola and provides a constant distribution of tension. Each leaf has more or less the shape of a complete multi-leaf spring and can therefore withstand a comparable force. The high quality OEM parabolic springs are paired with Cellular Dynamic shock absorbers. Also included in the kit are leaf spring correction wedges that can be used to correct caster or diff bolt angle by 3 degrees. The parabolic springs include u-bolts and nuts. Scope of supply: 2 x Parabolic Springs - 2 or 3 sheet 2 x Cellular Dynamic long travel shock absorbers 2 x Angle correction wedges

Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style Give your Land Rover Defender an upgrade that combines style, robustness and durability in equal measure! With our galvanised doors in the iconic Land Rover series style, you can transform your Defender from 1983 to 2016 not only visually, but also functionally. The advantage of galvanising - your protection against rust: You know the problem: rust is the arch enemy of every Defender. Our doors put an end to this problem! Thanks to the high-quality hot-dip galvanisation of the frames and internal components, these doors are extremely resistant to corrosion and moisture. That means for you: Less worries about rust, more enjoyment of your vehicle - for many years to come. Style series: classic look meets modern benefits: These two-part doors in retro design are a real statement. The special feature: The upper door section with sliding window is removable - ideal for all soft-top variants or simply to be even closer to nature when travelling off-road. The pre-assembled, pre-glazed upper sections come complete with all seals and running rails, so you can get started straight away. Sophisticated design for maximum performance: No hassle with window regulators: The simple sliding windows do not require vulnerable cranks, which prevents jamming or catching. More security: The improved lock design of the handles is much more stable and tamper-proof, which increases the security of your Defender. Slim & practical: The absence of massive interior panelling gives you valuable legroom, and the slimmer door (without protruding handles) is a clear advantage off-road. Ready for your colour: The doors can be painted directly in the colour of your car to perfectly match your individual look. Our galvanised doors are not only more durable and robust than conventional doors, but also a more cost-effective alternative to current push-button doors. They are manufactured to the highest quality standards and guarantee an excellent fit. The scope of delivery includes everything you need for the conversion: two fully glazed upper door sections, hot-dip galvanised cappings, hot-dip galvanised lower door sections, handle units, locking devices for the sliding windows, locking cylinders with keys as well as lock latches and seals. Detailed description: What are the advantages of the two-part doors compared to the original doors? In addition to the significantly lower price for the series-style doors, it is primarily the design and construction. Instead of the push-button handles on the standard doors, there are recessed lever handles as on the rear. Due to their design, these handles are significantly more resistant to break-ins because they are fitted with a stronger latch mechanism. They also do not protrude, which can make all the difference when driving off-road or through narrow passages. The retro doors also save space in the interior, which will be appreciated by any tall driver who otherwise has to make do with seat rails and small steering wheels. The window section with sliding panes made of high-quality glass is completely removable, which is particularly attractive for soft-top owners. What's more, you never have to worry about the window lifting mechanism again. No compromises are made in terms of quality and installation with these installation kits. The frames of the doors and window sections are hot-dip galvanised and the sheet metal corresponds to the factory specifications of the original parts. The two-piece retro doors fit all Defender models from 90 to 130 from 1983 to 2016 and are supplied with all the necessary fixings, handles, locks, strikers and seals. They are designed so that standard door functions such as alarm system contacts and automatic interior light switch-on continue to work. Two holes only need to be drilled in the door frame for the strikers, as these are located in a different position on the door frame due to the design. A drilling template is included. The series-style conversion kits can be ordered in pairs for the front and/or rear. Upgrade your Land Rover Defender with these indestructible and stylish doors and be ready for any adventure - with Nakatanenga!

Repair panel rear sump for Defender 110 Td4, Td5 and Tdi Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets. For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way. Please select: Complete set 3 pieces consisting of:  Repair plate main part and 2x corner parts 2-piece set consisting of: 2x corner pieces  

All the nooks and crannies in your Defender attract and hold water or wet dirt, which makes them a hotbed for corrosion – small wonder that the door areas are often affected by rust. Especially the C pillars in 4/5-door models frequently require replacement in Defender restorations because fittings, screw holes, undersides and the gaps between struts and body panels are a breeding ground for corrosion and often develop critical damage. Instead of piecemeal repair with angle grinder and welder, it’s often preferable to swap the entire component. We are offering individual C posts for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you prefer to replace the entire door frame with B and C posts and also the sill, you can find the entire set here.