Das könnte Sie auch interessieren
Electronic blower control for Land Rover Defender
€149.00*
Blower control for Land Rover Defender
Fan and heater in classic Defenders are notoriously poor in performance and reliability – especially in northern latitudes, where cold winters and rainy days regularly impair comfort and safety in the cockpit. While Land Rover upgraded to an improved fan heater for the Td4 (MY 2007), all previous models can easily be retrofitted with an electronic control system.
In contrast to the old analog fan heater, the new electronic control system allows for continuous adjustments. This ensures more efficient operation and therefore better ventilation, heating and dehumidification in the interior. Heating your vehicle’s interior can be achieved much quicker, as is demisting or de-icing of the windows. Additionally, the electronic control is much less prone to wear than the old mechanical solution using sliders and resistors, which are susceptible to shocks and vibrations.
The retrofit kit includes the electronic control, a stepless slider and all the assembly parts for the connections. Installation instructions are included.
Product number:
ELEGEBLESTEU
Ähnliche Artikel
Door Hinge Set for Land Rover Defender until MY2016 and Series 3 in Polished Stainless Steel
From
€477.00*
Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3
Enhance the appearance of your Land Rover!
Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III.
These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.
Product number:
DA1951M
Door Hinge Set, all Defender, front and rear
From
€99.00*
Door hinge set for front doors for all Defender / Series3
Door hinge set for rear door for all Defender, Series 2 & 3
Door Hinge Set for Middle (2nd) Door Row for all Defender
Steel fixing bolt set included in delivery
Product number:
TSD-VTM
Stainless steel fixing set for Land Rover Defender 90 SW / 90 HT / 90 softtop
€119.00*
Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us.
The screws' heads are identical to the original Defender screws!!!
Fits all model years - TDi, TD5, TD4 2.4, TD4 2.2
Set comprises ca. 380 pieces.
With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings.
The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).In addition special bonnet rubber screws are supplied, too.
The fixing sets are clearly arranged in 10 individual bags for ease of fitting:
rear body hinges
rear body fixings
grille
load bay strip and cat eyes
bonnet hignes
rear crossmember
spare wheel carrier
headlight surrounds and front wing covers
side door hinges
inner door sills and A post
+ 2 rubber screws
+ anti-seize paste
Very easy, DIY fitting possible.
We supply anti-seize paste for all screws.
Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB).
Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Product number:
VAST90SWM
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC
€83.00*
Door Hinge Bolt Set Stainless Steel for Land Rover Defender 110 SW/130CC
NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover form.The bolts have identical heads as the original bolts on the Defender!!!!Suitable for all years of construction - TDi, TD5, TD4 2.4, TD4 2.2Complete set of screws for 4 doors and rear door, V2A stainless steel for Defender 110 SW/130CC, incl. Anti Seize Paste.
Note: The screws for the door hinges may have to be shortened.
Product number:
VAST4DRM
StaiStainless steel bolt set for Land Rover Defender 110 SW / 110 CC / 130 CC
€143.00*
Stainless steel screw sets for Land Rover Defender
NOW EXCLUSIVELY manufactured for us in ORIGINAL Land Rover shape.The screws have the identical heads as the original screws on the Defender!!!Set includes a total of about 430 parts.With this set, all externally visible screws on the vehicle can be replaced with high-quality, rust-free V2A stainless steel screws.Suitable for all model years - TDi, TD5, TD4 2.4, TD4 2.2The side door and rear door hinge screws, as well as the screws for the body mounting at the rear, are specially manufactured for us and correspond in shape to the original screws (Torx tool holder).The pack also contains hood bumper screws specially manufactured for us.The screw sets are clearly arranged in 10 bags for each part of the vehicle:
Rear door hinges
Rear body mounting
Radiator grille
Cargo bed strip + reflectors
Hood hinges
Rear cross member
Spare wheel holder
Headlight covers + mudguard covers
Side door hinges
Inner door sill + A-pillar
+ 2 bumper screws
+ anti-seize paste
Simple installation is possible even for car amateurs.We also supply an anti-seize paste for the screws.The black stainless steel screws have been coated with a chromium oxide layer using a computer-controlled electrochemical process. This ensures that the stainless steel screws remain protected against rust.Please note: This set does not include the stainless steel hinge bolts for the ventilation flaps (item no. LKSB)
Note:
The screws for the door hinges may have to be shortened.
The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Product number:
VAST110SWM
Stainless steel fixing set for Land Rover Defender 110 HT (2-doors)
€119.00*
Produced with ORIGINAL Land Rover heads EXCLUSIVELY for us.
The screws' heads are identical to the original Defender screws!!!
Set comprises ca. 380 pieces.
With this fixing set you can replace all fixings visible from the outside with high-quality V2A stainless steel fixings.
The side and rear door screws as well as the body fixings at the rear are made especially for us and are identical in looks to the original fixings (Torx heads).
In addition special bonnet rubber screws are supplied, too.
The fixing sets are clearly arranged in 10 individual bags for ease of fitting:
rear body hinges
rear body fixings
grille
load bay strip and cat eyes
bonnet hignes
rear crossmember
spare wheel carrier
headlight surrounds and front wing covers
side door hinges
inner door sills and A post
+ 2 rubber screws
+ anti-seize paste
Very easy, DIY fitting possible.
We supply anti-seize paste for all screws.
Please note that this kit does not include stainless bolts for the bulkhead vent flaps (part nr. LKSB).
Note: The screws for the door hinges may have to be shortened.The sets for the various sections contain more screws to cover different attachments. This means that screws may be left over under certain circumstances.
Product number:
VAST110HTM
Hinge pin ventilation flap Defender
€19.00*
Prices incl. VAT; plus shipping costs / Parcel shipping
Available from stock - delivery time 1-3 working days
Product number:
LKSB
Weight:
0.2 kg
Stainless steel, fits all Defender up to MY 2007.
The set consists of 4 bolts and 10 nuts (incl. 2 spare nuts).
Please note: This set is not included in our stainless steel bolt set!