Protection
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ / HJ EXHAUST GAS CONTROL SYSTEM suitable for all Jimny models of the type GJ built from the end of 2018 and Type HJ suitable for all engine and transmission types from 3 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle
Prices incl. VAT;
Nakatanenga Roll-On Set with U-POL RAPTOR 4 Bottle Kit - Colour: RAL 9011 Black
U-POL RAPTOR Roll-On Set - RAL 9011 Black (4 Bottle Kit) Now it is no longer necessary to spray with a compressor and spray gun - with our new Raptor Roll-On-Set you can now also apply the popular RAPTOR-coating by yourself without any problems! As an official distributor of the popular RAPTOR-coating we have come up with a simple DIY solution together with the official manufacturer U-POL: since the Raptor-coating, unlike other coatings, does not have to be heated, you can use this roll set. The roll-on set consists of:1x color roller bracket with ergonomic profile3x coarse foam structure rolls in top quality (Ø 35mm)2x paint trays or paint trays with practical spout nose and integrated measuring strokes (15x32cm)2x sanding pads for sanding the surface (1x with alumina grain type and 1x with silicon carbide grain type)2x disposable gloves Please refer to the instructions / data sheet for processing instructions.
Prices incl. VAT;
Retrofit kit for Mercedes G Rockslider
Retrofit kit for Mercedes G Rockslider The original screw points of the running boards must be present for the G-Slide to be fitted smoothly. If these screw points are not present, this retrofit set is available. Set consists of: 6x counter plate (79x60x6 mm), 1x threaded rod (M3x10), 6x washer (6.4x25x1.25), 6x hexagon socket head (M6x20)
Prices incl. VAT;
Differential Guard for P38 rear Axle, Land Rover Defender
Large differential guard with skid plate and hardware for the P38 rear axle of a Land Rover Defender 110/130 from the model year 2002 From the model year, 2010 on two holes need to be drilled. Not many parts on any 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.
Prices incl. VAT;
U-POL RAPTOR Coating- 4 bottle Kit
U-POL RAPTOR - The robust protective coating that also looks good! In contrast to other coatings, the RAPTOR multipurpose coating / painting does not need to be heated. It can simply be sprayed on and then hardens. For a mixture of 1 liter 50ml of paint are required - 1 liter covers an area of approx. 4.2m² - for processing we recommend the standard RAPTOR spray gun, the RAPTOR spray gun with adjustable spray nozzle for better texture adaptation or our roll-on -Set (application via paint roller). To prepare the substrate, we recommend the MIPA Etch primer, the MIPA 1K adhesion promoter, the U-POL universal primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please note the processing instructions stored under instructions / data sheet. What is RAPTOR protective coating / painting? The RAPTOR protective coating is a particularly robust coating made of polyurethane.This give surfaces an efficient and long-lasting protective layer, which is ideal for demanding conditions. The RAPTOR paintwork was developed in such a way that it can withstand almost any weather condition. The reliable UV resistance does not allow fading or fading - not even after many years in the sun. In addition, it offers the best protection against rust formation - thanks to the waterproof surface! Why the RAPTOR multipurpose coating? + PROTECTION:The coating offers excellent UV protection and, thanks to its ideal seal, protects against rust, corrosion, moisture and extreme temperatures. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES:You have the option of creating smooth or structured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a sheen. + COLOR CHOICE:The multi-purpose coating can be tinted according to the color of your choice or sprayed over with different colors. Scope of delivery: 4x 711 ml bottles coating946 ml hardener
Prices incl. VAT;
Nakatanenga Type Q Lamp Guards for Fog and Reverse light, Pair
Lamp protection grille for fog light, reversing light Our type Q lamp guards for signal lights not only improve the appearance of your Land Rover Defender, but also protect the lights from damage while off-road driving. High-quality black powder coating suits the other black OEM attachments as well as our own range of add-on parts. The guards fit the Defender original signal lights as well optional LED signal lights sold by us. Vehicle: Land Rover Defender 90/110/130 Signal lights: fog light and reverse lightMaterial: V2A stainless steel 1.4301, glass bead blasted, black powder coated, 2 mm material thicknessFixings: suppliedSold as: pairs (2 pieces)
Prices incl. VAT;
Bundle: U-POL RAPTOR Multipurpose Coating - 4 Bottle Kit - with Spray Gun
Special offer bundle RAPTOR 4-Bottle Kit black or colourable -10% discount on the bottle kit including free spray gun Unlike other coatings, the RAPTOR multi-purpose coating/paint does not need to be heated. It can simply be sprayed on and then cures. A mixture of 1 litre requires 50 ml of paint - 1 litre covers an area of approx. 4.2 m² - for application we recommend the standard RAPTOR spray gun (included in this bundle), the RAPTOR spray gun with adjustable spray nozzle for better texture adjustment or our roll-on set (application via paint roller). To prepare the substrate, we recommend We recommend the U-POL universal adhesion primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please observe the processing instructions in the instructions/data sheet. What is RAPTOR protective coating / varnish? The RAPTOR protective coating is a particularly robust polyurethane coating. This gives surfaces an efficient and durable protective coating that is ideal for demanding conditions. The RAPTOR coating has been developed to withstand almost any weather conditions. The reliable UV resistance prevents fading or bleaching - even after many years in the sun. It also offers the best protection against rust formation - thanks to the water-resistant surface! Why choose the RAPTOR multi-purpose coating? + PROTECTION: The coating offers perfect UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to an ideal seal. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer. + CHOICE OF COLOURS: The multi-purpose coating can be tinted to the colour of your choice or over-sprayed with different colours. Scope of delivery: 4x 711 ml bottles of coating (selectable colour: black or clear-tintable) 946 ml hardener Standard RAPTOR spray gun ONLY WHILE STOCKS LAST!
Prices incl. VAT;
Nakatanenga Chequer Plate Rear Crossmember for Land Rover Defender
Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Differential Guard, Discovery I, front and rear
Differential protection for Land Rover Discovery 1 for front and rear differential Few components on an off-roader are as exposed as the differentials of the front and rear axles. It doesn't take long for costly damage to occur when hitting a stone, which usually cannot be repaired on site and therefore means the end of the journey. What is annoying in the off-road park at home can quickly become dangerous in more remote regions of the world. We have therefore designed appropriate protective devices for the various axles of the Land Rover Defender, which protect the differential covers from damage and in some cases also allow easier sliding over the obstacle.
Prices incl. VAT;
Nakatanenga Lamp Guard Type Q for Indicator/Brake/Position Lights, Pair
Protective grille for blinker, brake and parking lights Type Q lamp guards enhance your Defender lights and protect them from damage in offroad conditions. The high-quality black powder coating matches the other black OEM attachments as well as our own range of procucts, of course. The guards fit the original Defender signal lights as well as the aftermarked LED signal lights available from us. Vehicle: Land Rover Defender 90/110/130 Signal lights: indicators, brakes, position lights Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, thickness 2mm Fixings: not necessary, the original light fixings are used Sold as pairs (2 pieces)
Prices incl. VAT;
Nakatanenga side indicator protection - Typ Q - pair
Lamp protection grille for mudguard indicators The type Q protection cage for the fender indicators of the Land Rover Defender elevates the design of your vehicle but also actually protects your indicators when using the 4x4 in rough terrain. The heavy-duty back powder coat compliments other OEM accents on the car and most of our accessories. The guards fit both the originals of our aftermarket LED replacements. Vehicle: Land Rover Defender 90/110/130 Indicators: front fender Material: V2A stainless steel 1.4301, black powder-coat, thickness 2 mm Hardware: not necessary, you can use the existing holes and hardware -pair-
Prices incl. VAT;
Dirt D-Fender Wheel Arch Extensions for Land Rover Defender
Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish.
Prices incl. VAT;
Nakatanenga Protective Grille Mudguard Indicator, for Land Rover Defender
Nakatanenga protection grille wing indicators, for Land Rover Defender The Nakatanenga protective grilles for the mudguard indicators of the Land Rover Defender 90/110/130 are on the one hand a protection of the headlights against mechanical damage (e.g. by branches), on the other hand a design element, which belongs to the classical optics of the vehicle. They are a perfect fit for both the original turn signals and the Nakatanenga LED mudguard turn signals. The lamp guards are manufactured locally from stainless steel and can be given a high-strength black powder coating on request. This can be painted over (e.g. in car colour). Scope of delivery: Two indicator protection grilles, foam rubber base, anti-theft mounting material. Only available in stainless steel, black powder-coated!
Prices incl. VAT;
Checker plate bonnet Land Rover Defender Td4 - Plate on hump
Checker plate bonnet Land Rover Defender Td4 - plate on hump for Land Rover Defender from MY 2007, delivery includes rivets.The product is optionally available with anodised or black powder-coated surface, please select below.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Reef corners for Land Rover Defender
Reef corners for Land Rover Defender 110 The ribbed corners on the rear of the Land Rover Defender protect it during off-road use and round off the appearance visually.Suitable for Defender up to MY2016.They are available for the Defender 110, in narrow or wide versions - see pictures. They are also available in various surface finishes - anodised aluminium, black and anthracite can be seen in the picture.They are always supplied in pairs and include the rivets required for fitting. Please select wheelbase, desired width and desired colour of the ribbed corners below. For Defender 110, in narrow or wide version, available in different colours, incl. mounting material, price per pair.
Prices incl. VAT;
Nakatanenga Dirt Trap Plate with Stainless Steel Holder, front axle
Nakatanenga mud flap with stainless steel holder Our heavy-duty mud flaps (for the front axle) can also be fitted together with these mud flaps.
Prices incl. VAT;
Door protection strips TREKFINDER for SUZUKI Jimny II from 10/2018, typ GJ an HJ, right & left side
TREKFINDER door protection moulding set for Suzuki Jimny II (from 10/2018, type GJ/HJ) Robust protection for both sides of the vehicle: The door protection moulding set from TREKFINDER is a perfect fit for the Suzuki Jimny II from model year 10/2018 (type GJ and HJ). It reliably protects against scratches, dents and damage during off-road use or everyday driving - for the right and left side of the vehicle.
Prices incl. VAT;
Track rod guard Land Rover Defender, 4mm Steel Galvanized
Hot-dip galvanised track rod guard - for Land Rover Defender Track rod guard for Land Rover Defender 90/110/130, 4 mm zink-dipped steel, all model years. The track rod guard / skid plate protects the tie rod which is vulnerable in serious off-road driving, thus maintining steering ablility and avoiding expensive repairs and breakdowns Can not be fitted together with our heavy-duty tie rod set TRHDDESET!
Prices incl. VAT;
Mike Sanders Corrosion Protection 4 kg
Can of Mike Sanders Anti-Corrosion Grease - 4 kg Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 4 kilograms (€18.75 / 1 kilograms)
Prices incl. VAT;
U-POL RAPTOR spray gun with adjustable spray nozzle
U-POL RAPTOR spray gun with adjustable spray nozzle Spray gun with adjustable spray nozzle for applying Raptor multi-purpose coating. For screwing onto Raptor bottles. The adjustable spray nozzle provides a professional and even finish and is suitable for better texture matching.Why use the RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:
Prices incl. VAT;
Chequer plate cover plate for Land Rover Defender tailgate outside, from MY02
Checker plate cover plate for Defender 90/110 Cover plate for the rear door of the Land Rover Defender 90/110 (outside), material: anodised aluminium (3mm), different colours available, is mounted instead of the original spare wheel holder. The use of anodised aluminium has the advantage that the plate does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below. In model year 2002 there was a change to the rear door, unfortunately it is not possible to differentiate purely by model year here. Until 2002 the door was made of aluminium and the window was glued in. From 2002 onwards, the rear door was made of steel and the window is fixed by means of a rubber seal. The dimensions of the cover plate is 45x28 cm (from 2002). Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Differential Guard (front axle) for Land Rover Defender 90/110/130
Essential differential guard for the rear axle of any Land Rover Defender 90/110/130 Not many parts on a 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.
Prices incl. VAT;
Protective moulding and protector kit from TREKFINDER
Protective strip kit from TREKFINDER with 5 m long, attractive rubber profile incl. end caps, suitable for cars, lorries, motorhomes, boats and trailers Multifunctional use: PROTECTION: The protective moulding set effectively protects contact surfaces on the vehicle from external mechanical impact. Successfully prevents scratches, dents and minor damage caused by impacts such as parking bumps, shopping trolleys, doors, etc. RETURNS: Existing scratches, paint damage and visual defects can be covered with the mouldings at a later date. OPTICS: The protective moulding set enhances the appearance of your vehicle. The elegant rubber profile, as a discreet application, sets striking accents and makes your vehicle appear more valuable.Material: high quality durable flexible Temperature-resistant UV-resistant high adhesive strength Shape: the curved shape prevents the adhesive tape from being visible, the moulding does not stick out but merges with the bodywork, an invaluable advantage over conventional profiles!!! Easy to fit: The protective moulding is flexible and can be easily cut to the desired length.Remove the backing film from the adhesive strip and press the protective moulding onto the planned body part.Then select the desired shape of the end cap (round or square). Remove the backing film here too and press it onto the end of the protective moulding.DONE :) Scope of delivery: 1 piece 5 m rubber profile 8 end caps 1 cleaning cloth
Prices incl. VAT;
Differential Guard (rear axle) for Land Rover Defender 90, Discovery I and Range Rover
Essential differential guard for the rear axle of any Land Rover Defender 90, Discovery 1 and Range Rover Not many parts on a 4x4 are as exposed as the front and rear differentials. That's why even a small hit out on the trail can lead to an abrupt end to your trip and an expensive visit to your local shop. Something like that would be annoying in your local offroad park but can become extremely dangerous in rural areas of the world. That's why we have designed the perfect diff guards for the different Land Rover Defender axles, allowing for maximum protection and the occasional skid across obstacles.Fitts all model years
Prices incl. VAT;
U-POL RAPTOR dye 500 ml for 5 l / Can be dyed, for all RAL colours
Colouring agent for RAPTOR dyeable 500 ml of colourant is sufficient for 5 litres of RAPTOR Liner. Any RAL colour can be mixed. For example, in conjunction with the following RAPTOR articles:- U-POL RAPTOR coating - 1 bottle kit, coating and hardener, colourable- U-POL RAPTOR Coating - 4 bottle kit- RAPTOR Liner 5LPlease state the desired RAL colour in the order text when placing your order.
Content: 0.5 liters (€118.00 / 1 liters)
Prices incl. VAT;
Chequer plate supports Suzuki Jimny, type GJ / HJ
Chequer plate supports for Suzuki Jimny 2 by TREKFINDERSuitable checker plate supports for SUZUKI Jimny 2 from 10/2018 (model GJ / HJ)Material: Aluminium AlMg3 sea water resistant For mounting on the front bumper, right & left side. (see product pictures)The product can be painted by you or coated with RAPTOR paint. Supplied in pairs incl. screws.
Prices incl. VAT;
Checker plates for rear bumper, Suzuki Jimny II, 1 pair
Checker plate supports rear TREKFINDER for SUZUKI Jimny II from MY 2018 for the rear bumper corners on the right & left side. Scope of delivery: 2 pieces aluminium chequer incl. stainless steel screws. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer (quintet plate)
Prices incl. VAT;
Heavy Duty Mud Flaps for Land Rover Defender
Splash guard Heavy Duty Nakatanenga heavy duty mudflaps for Land Rover Defender 90/110/130, set containing 2 pieces. Our mudflaps are available for either front or rear axle fitting. Our mudflaps are made of HDPE (high-density polyethylene) and are very durable with less danger of ripping them off when reversing. Can be fitted to the front with the original mountings or our heavy duty mudflap mountings. At the rear the original mountings are used.
Content: 2 Piece (€22.50 / 1 Piece)
Prices incl. VAT;
Bumper protection for New Defender from MY2020, 3 colours
Bumper protection What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, matt black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer. Please note: The transparent version differs from the other versions in terms of price and workmanship, as it uses a specially developed, UV-stabilised film. This film is specifically designed to minimise material yellowing caused by UV radiation and ensure long-term visual stability. The transparent film MUST be applied wet! For professional application, we provide detailed installation instructions and the necessary processing materials. Instructions for wet application: Fill a spray bottle with water and 1–2 drops of washing-up liquid (or mounting/application solution). Remove coarse dirt from the loading sill with a damp cloth and then clean thoroughly with the enclosed cleaning cloth – the surface must be clean and dust-free. Spray the loading sill evenly. Remove the protective film from the film and also spray the adhesive side lightly (so that it does not stick immediately). Apply the film and align it carefully. The moisture allows it to be moved around. Squeegee out the water, working from the centre outwards. Apply even pressure to remove the water and air bubbles. Remove any excess liquid with a cloth. The film is fixed after squeegeeing, but only reaches its final adhesion after 24–48 hours. During this time: Do not wash, do not use a high-pressure cleaner. Keep as dry as possible and avoid mechanical stress.
Prices incl. VAT;
Nakatanenga splash guard for Land Rover Defender, fender front axle
Nakatanenga splash guard for Land Rover Defender, fender front axle On the Land Rover Defender, a meticulous MOT inspector may deem the wheel cover on the front axle mudguard to be inadequate. This can happen if one or more of these factors are present: larger tires wider tires bumper with optimized slope angle (our NAWIBU2 or XHD for example) higher suspensionFor this reason, we have developed a splash guard for temporary or permanent installation that solves this problem and restores the necessary wheel coverage.Scope of delivery: 1 pair
Prices incl. VAT;
License plate holder for NAWIBU winch bumper
License plate holder for NAWIBU winch bumper Our heavy duty Nakatanenga winching bumper for classic Defenders is the perfect mounting solution for winches. The entire winching unit stays well protected behind the bumper and the winching cable runs smoothly through the integrated winch window in the middle of the bumper. Normally, this is where the license plate is positioned and that brings us to the problem and our simultaneously elegant and quick solution. Our custom made number plate holder is simply screwed into the fastening holes of the winching window, making it possible to mount the number plate more or less in its usual position. The winch’s functionality is in no way restricted or impeded, of course. The number plate holder is made from aluminum and features a matte black powder coating (RAL9005) which perfectly matches the look of the winching bumper. Material: AluminumFinish: RAL9005 matte smooth
Prices incl. VAT;
Chequer Plate Cowling Tank Spout Land Rover Defender
Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.
Prices incl. VAT;