Protection
Defender winch bumper
Ideal for off-road use, expeditions or professional rescue operations This high-quality winch bumper was specially developed for the Land Rover Defender and combines extreme robustness with functional design. It not only offers reliable protection off-road, but is also optimally prepared for the installation of a winch. Whether in the deepest terrain, when overcoming difficult passages or for self-recovery - this winch bumper is your reliable partner when it counts.Heavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grilleHeavy-duty - also suitable for WARN 9000 Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, Aluminium, 6mm
Transmissionguard, Aluminium 6 mm, for Land Rover Defender TD4 90/110/130, from MY '07 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Running board round tube, for Land Rover Defender 90/110
Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.
Prices incl. VAT;
Military towing bumper, front, all Defenders - available here!
Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130 Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting.Delivery incl. bolt and retaining clip. Surface: optionally black primed or hot-dip galvanised. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 from MY 2007
Durable Aluminum Fender Plates – Non-Slip & Stable, Made in Germany Chequer plate wing top protection for all Land Rover Defender 90/110/130 from model year 2007. Made of 3mm aluminum with additional powder coating (all RAL colours). Supplied in pair with rivets. Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td4, galvanized steel, 4mm
Transmissionguard, galvanized steel 4 mm, for Land Rover Defender TD4 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Transmission Guard, for Land Rover defender Td5, galvanized steel, 4mm
Transmissionguard, galvanized steel 4mm, for Land Rover Defender TD5 90/110/130 Protects the transmission in rough terrain, to allow for the perfect day out on the trail without any failures or damage. Simultaneously the guard functions as a skid plate allowing you to gently slide over obstacles.
Prices incl. VAT;
Mike Sanders Corrosion Protection Grease 25kg
Can of Mike Sanders Anti-Corrosion Grease - 25 kg Base price per 1 litre: EUR 10.42 Cavity and underbody protection for bare, rusted and painted sheet metal. Can be applied using the "Do-It-Yourself" method. The hot spray process and the material were developed by Mike Sander over 30 years ago and have since been multiple test winners in long-term tests. Due to the so-called creep ability of the special grease, it spreads evenly even in the most angled corners of a car body and thus beats many other corrosion protection products.
Content: 24 kilograms (€13.71 / 1 kilograms)
Prices incl. VAT;
Underride Protection Heavy Duty TREKFINDER for SUZUKI Jimny 2 Type GJ BJ from 2018 and Type HJ
Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions. Additionally and for an even easier instalation, all the nuts and bolts are already included.
Prices incl. VAT;
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender
Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today. Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request. Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated Integrated recovery eyes (22.5 mm diameter) The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny 2 type GJ / HJ DISTRIBUTION TRANSMISSION from 8 mm aluminum
TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 4-piece
Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet, black powder-coated. Delivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)
Prices incl. VAT;
Chequer plate for bonnet for Defender Td4, 2-piece
Chequer plate cladding for the bonnet Finally also available for the Land Rover Defender Td4 from MY07: chequer plate trim for the new bonnet (black powder-coated) This article is bulky goods. Material thickness: 2.5 mm base thickness / 4 mm incl. corrugation (quintet plate)
Prices incl. VAT;
Tank protection plate for Land Rover Defender
Robust tank protection for your Land Rover Defender The tank protection plate for the Land Rover Defender 90/110/130 of the Td5 and Td4 series (2.4 and 2.2) protects the entire width of the tank from dents, damage and leaks during off-road use. This prevents vehicle downtime and costly environmental damage. The tank protection plate can be used in conjunction with standard trailer couplings. It is made of weight-optimised, 6 mm thick, anodised aluminium. Please select your vehicle type below.
Prices incl. VAT;
Differential protection for the Salisbury rear axle, large
Large differential protection with slip plate for the Salisbury rear axle of the Land Rover Defender 110/130 to MY02 Only a few components are as exposed in an off-roader as the differentials of the front and rear axles. Quick damage to a stone caused a costly damage, which usually can not be repaired on site and thus means the end of the ride. What is annoying in the home offroad park can quickly become dangerous in more remote regions of the world. Therefore, we have designed corresponding protective devices for the various axles of the Land Rover Defender, which protect the lids of the differentials from damage and in some cases also facilitate easier gliding over the obstacle.Black galvanized, delivery including the required mounting material.
Prices incl. VAT;
Chequer plate bonnet, Land Rover Defender up to MY07, black incl. rivets
Chequer plate for bonnet incl. rivets for Defender up to MY07, black powder coatedIllustration symbolicMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny II type GJ FRONT AXLE made of 5 mm steel yellow galvanized
TREKFINDER underride guard for SUZUKI Jimny II type GJ BJ 2018 front axle suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all Vorderachsausführungen made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Prices incl. VAT;
Underride protection TREKFINDER for SUZUKI Jimny 2 Type GJ BJ 2018 and Type HJ
Underride protection TREKFINDER for SUZUKI Jimny II type GJ and HJ REAR AXLE made of 5 mm steel yellow galvanized suitable for all Jimny models of the type GJ built from the end of '2018 suitable for all engine and transmission types suitable for all rear axle versions made of 5 millimeters of steel yellow galvanized including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version
Prices incl. VAT;
Underride protection, 3-piece, steel 4mm, with welded-in 4mm reinforcement, Land Rover Defender
Underride protection for Land Rover Defender Underride protection with two heavy duty recovery eyes for all Land Rover Defender, robust three-part construction, steel 4mm, with welded-in 4mm reinforcement in the impact area, optionally hot-dip galvanised or hot-dip galvanised and black powder-coated Underride protection suitable for all Land Rover Defender from 1983 to today skid plate made of 4 mm thick steel, with welded-in 4 mm reinforcement in the impact area galvanised or galvanised and black powder-coated as desired Side parts made of 8 mm thick steel, galvanised (black) with two robust heavy duty recovery eyes The underride guard is attached to the original mounting points using the original vehicle bolts. The complete other installation material is included.Material info:Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or very much slows down the corrosion of the base material.Attention: The shackles shown are not included in the delivery.Please select the desired surface.
Prices incl. VAT;
Chequer plate for bonnet, Land Rover Defender up to MY07, incl. rivets
Chequer plate for bonnet incl. rivets for Defender up to MY07 Picture 2 serves only as a colour sample for possible coatings, you order here the article in anodising.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet plate)
Prices incl. VAT;
Window guards for Land Rover Defender 90/110
Window grille for Land Rover Defender 90/110 Window grille, for Land Rover Defender 90/110, for the rear side windows, material: aluminium, anodized, black powder-coated, 1 piece, delivery incl. blind rivets Please also note our optional safety mounting set for these grilles. Suitable for the rear side window of the Land Rover Defender 90/110 or windows of the same size (108x45 cm) Dimensions for mounting: Hole spacing horizontal: 112 cm Hole spacing vertical: 49 cm
Prices incl. VAT;
Underride protection for SUZUKI Jimny type FJ BJ 1998 to 2018
Underride protection for SUZUKI Jimny type FJ MY 1998 to 2018 transferbox by TREKFINDER made of 8mm aluminium Underride protection TREKFINDER Heavy Duty for Suzuki Jimny transferbox (fits all Jimny models type FJ year of construction 1998 to 2018 (NOT from 2018 type GJ)) - incl. plug and switch protection made of 8 millimetre aluminium - super stable and flat design.ATTENTION: in Jimny models, transfer case mountings of different heights are installed ex works, it may be that you have to underlay the underride protection on both sides with washers - this individual adjustment allows minimum distance to the VTG - this in turn means optimum ground clearance off-road and is a technical advantage!The underride protection is mounted at the original points - no drilling is required.
Prices incl. VAT;
Nakatanenga Headlight Guard for Land Rover Defender
Nakatanenga Headlight Protection Grille for Land Rover Defender Nakatanenga headlight guards for Land Rover Defender 90/110/130 both protect your headlights from mechanical impact (e.g. branches) and also improve the appearance adding the classic look to your vehicle. In addition, with more and more high-value LED headlights being fitted, they also serve as an effective theft protection when useing the supplied theft inhibiting mounting kit. The lamp guards are produced locally from stainless steel and are powder coated in a very durable black coat which can be further painted in any colour (e.g. your vehicle colour). Included in delivery: two light guards, theft inhibiting mounting kit We have tested the guards with the following lights and can confirm that they don't cast any annoying shadows: OEM Land Rover headlights clear glas headlights Truck-Lite 7" LED headlights Nolden 7" LED headlights Further modals are being tested. The Nakatanenga headlight guards can be combined with the original light covers or our heritage-style covers.
Prices incl. VAT;
Window grille for Defender 90/110 SW for mounting on the inner lining, suitable for MOLLE system
Window grille for Defender 90/110 SW for mounting on the inner lining or door frame, suitable for MOLLE system If you plan to extend your off-road, work, expedition or camper vehicle’s storage capacities, you want to maximize on flexibility, economic use of space and safety. Every trip is different: snow on one day, sand or mud on another. Sometimes you’re out for a weekend, other times it’ll be months on and off the road. Always ready to quickly accommodate widely diverse tasks, a MOLLE-compatible storage system has the additional advantage that it’s never in the way, like chests, boxes or drawers so often are.To provide a great solution for your flexible storage needs, we have developed a perfectly fitting system of interior window grills made from powder-coated aluminum for Defenders 90 SW and 110 SW up to MY 2016. Using the included fastening materials, the grills are simply screwed into the interior trim of the cargo area windows and thereby function as an equally lightweight and sturdy MOLLE grid. MOLLE (MOdular Lightweight Load-carrying Equipment) is a system of bags, pouches, holders, holsters and all kinds of straps and other fasteners that can be tied or clipped into webbings or grids – in this case the window grill – ultimately creating a very flexible, lightweight and secure carrying system for all kinds of gear. In contrast to boxes, shelves or drawers nothing can fall, slide or fly around, you always have quick and easy access and the storage space required is only little more than the size of the equipment itself. It doesn’t get much more efficient than that.In addition, we also offer a wide variety of MOLLE-bags and pouches, MOLLE-compatible emergency and first aid kits, and all kinds of fasteners, from strap sets to quickfist clips for tools and other gear. In combination with the window grids, these accessories let you customize a safe, space-saving and lightweight storage system for all tasks and purposes. Material: Powder-coated aluminum, black. Available window grilles:1 x Rear Window (Fastening on door frame)2 x Rear Quarter Window (Fastening to interior trim)2x side window load compartment (Fastening to interior trim)Mounting material included Please note:The rear quarter windows are only suitable for Land Rover Defender TD4.MOLLE-bags, quickfists and other accessories depicted in the photos are NOT included in the delivery and must be ordered separately.
Prices incl. VAT;
Spare Wheel Bracket Cover Rear Door New Defender
Spare Wheel Bracket Cover Rear Door New Defender If you’re driving your New Defender mostly short distance and in city traffic, you will most likely have thought about removing the enormous spare wheel from the cargo hold door. For one, it impedes your all-round view in dense traffic and when you’re parking it makes your already sizable Defender that much longer. So, if you decide to do without your spare wheel, we have an equally elegant and flexible solution for you to cover the wheel mount openings in the rear door. Two perfectly fitted black steel covers - available in smooth or tread plate – are simply screwed into the original mount holes, making your Defender’s rear look like nothing’s missing. Should you need your spare wheel re-installed for longer trips, removing the covers is a matter of minutes. Furthermore, if you wish to paint the covers in your vehicle’s color, it is a perfectly simple job for both paint professionals and DIY enthusiast. The black powder coating serves as a perfect primer layer. Scope of delivery: 2 x aluminium sheets, black powder-coated, available in smooth or corrugated.Fixing material Please note: The screws may only be tightened hand-tight! Max. 5Nm! <iframe width="560" height="315" src="https://www.youtube.com/embed/rhPTpwBGm7k?si=iVsQa9mPYfvMNwZA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>
Prices incl. VAT;
Nakatanenga Sill Guard Protectors for Land Rover Defender, Chequer Plate
Sill protectors made of checker plate for Land Rover Defender in various designs The 3 mm thick, robust sill protectors made of checker plate prevent damage to the sill area of your Land Rover Defender and also emphasise the rustic appearance of the vehicle.The Nakatanenga door sill protectors are currently available for the Land Rover Defender 90, the 110 Station Wagon and the 130 Crew Cab. They are supplied in pairs, including the rivets required for fitting. Sill protectors made of checker plate, material thickness 3 mm, available for different vehicle versions.Please select the required vehicle model and the desired colour of the door sill protectors.Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)You can find loading area rails for the Land Rover Defender 90 and 110 here.
Prices incl. VAT;
U-POL RAPTOR liner black 5L
RAPTOR-LINER black or tintable The 5 liter RAPTOR canisters are perfect for large areas such as trailers, floors, heavy equipment and complete oversprays. - Mix in a ratio of 3: 1 (15 liters of RAPTOR to 5 liters of hardener), so that 20 sprayable liters of RAPTOR are created - sufficient for an area of around 60 m².- Can be applied with a brush or sprayed with pneumatic or conventional HVLP spray equipment.- Suitable for applications in the areas of vehicles, construction, seafaring, leisure, industry, agriculture and trade. The robust and tintable RAPTOR protective coating from U-POL is a two-component coating made of polyurethane, which provides surfaces with a protective layer.Properties:- Durable:Provides a surface that resists mechanical damage and is stain resistant.Protects against rust and corrosion. - UV-resistant:Characterized by high light fastness. - Waterproof:The result is a waterproof surface that keeps moisture away and prevents rust. - Resistant:Resistant to fuels, hydraulic oils, animal urine, salt water and more. - Quick and easy to useSimply fill, shake and spray.Ensures excellent adhesion on various substrates.Can be applied with a protective gun, HVLP gun, roller or brush.Certificates:Fire resistance RAPTOR has passed flammability tests for automobiles using the test methods FMVSS 302, ISO 3795 and BS AU 169A.When used with the RAPTOR additive for slip resistance, a surface is created that meets the ASTM E303-93 standard.Substrates and preparation: - Original paint- Polyester filler- SMC- Aluminum * - Most types of plastic * - Cataphoresis * - Bare metal * - Fiberglass-concrete * - Galvanized surfaces * - Glass fiber reinforced plastic- wood ** Some substrates require one before applying RAPTOR additional surface preparation.
Content: 5 liters (€35.40 / 1 liters)
Prices incl. VAT;
Land Rover Defender OEM front bumper
Original Look for Your Defender (90/110/130): The OEM Front Bumper! Has your old front bumper seen better days? An unfortunate bump off-road, corrosion, or simply the desire for a fresh, original look – there are many reasons to replace the bumper on your Land Rover Defender. With this OEM (Original Equipment Manufacturer) front bumper, you ensure that your Defender retains its classic and authentic character. It matches the original part installed at the factory in terms of shape, quality, and fit. This speaks for the OEM Front Bumper: Perfect Fit: Designed as an original part, this bumper fits your Defender 90/110/130, all model years, without any need for modifications.Since this OEM bumper corresponds to the original bumper installed at the factory, no entry in the vehicle documents is necessary. Authentic Look: Preserve the original appearance of your vehicle. Ideal for restorations or if you value originality. Robust Quality: Manufactured to the vehicle manufacturer's standards to withstand the demands of everyday use and light off-road conditions. Easy Replacement: The exchange is usually straightforward, as all mounting points correspond to the original. Value Retention: Using original parts can positively impact the value retention of your Defender. Whether you need to replace a damaged bumper or simply want to restore your Defender to its former glory – with this OEM front bumper, you're making the right choice. Surface: optionally black primed or hot-dip galvanized. Please note: The black primed bumper is only PRIMED (!) and should be painted or powder-coated before assembly, as it is otherwise not corrosion-resistant. Give your Defender its original face back! Order your OEM front bumper now! Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006
Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006 Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to model year 2006. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. These chequer plates are rounded at the front and side to follow the shape of the front wing. For vehicles up to MY 2006 the protection plates include the antenna, for later models, the plates are shorther. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;
U-POL RAPTOR hardener 5L
RAPTOR is a robust, two-component polyurethane coating The 5 Litre RAPTOR tins are ideal for large areas such as trailers, floors, heavy equipment and full oversprays. Mix 3:1 (15 L of RAPTOR to 5 L of Hardener) to make more than 20 L of RAPTOR and cover approximately 60 m²Can be brush applied, rolled or sprayed through pneumatic or conventional HVLP spray equipment Features: TINTABLECan be tinted to match required colour.Also available in black. DURABLEProvides tough mechanical damage and stain resistant surface.Protects against rust and corrosion. U.V. RESISTANTDelivers a high level of fade resistance: WATER RESISTANTProvides a water resistant finish, keeping moisture out and reducing rust. RESITSTANTResistant against fuels, hydraulic oils, animal urine, salt water and more. QUICK & EASY TO USEEasy as Fill-Shake-Shoot.Provides excellent adhesion across many substrates.Can be applied with Schutz gun, HVLP gun, roller or brush. Certificates: FIRE RESISTANCERAPTOR has passed flammability testing for motor vehicles according to the test methods FMVSS 302,ISO 3795 & BS AU 169A. SLIP RESISTANCEWhen used with RAPTOR TRACTION Anti-Slip Additive it produces a finish meeting ASTM E303-93.
Content: 5 liters (€35.80 / 1 liters)
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC
Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC Chequer plate wing top protection for all Land Rover Defender TD4 / Puma 90/110/130 MY 2007-2016. Made of 3 mm aluminum with additional powder coating. Supplied in pair with rivets. CLASSIC version. Please note: the protective covers for Defender MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer
Prices incl. VAT;
Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016
Chequer plate wing top protection for all Land Rover Defender 90/110/130 MY 2007-2016 . Made of 3mm aluminum with additional powder coating. Supplied in pair with rivets. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer. Please note: the protective covers for Defender form MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl chequer
Prices incl. VAT;