Vehicle accessories

Mounting tool for studs with Ø 9mm Bit (tool) for mounting spikes with a diameter of 9 mm on winter wheels.Easily compatible with a cordless screwdriver due to the hexagonal profile of the screw head.Note: Tyre studs are prohibited in GermanyAssembly steps:1. position the head of the corresponding studs with the mounting tool2. place the thread of the stud on the tyre surface3. press down & screw in with a cordless screwdriver while turning slowly4. screw in the spike only until the head touches the tyre surface5. if the spike is unintentionally screwed in too far, leave it as it is - do not unscrew it to try to get it into the correct position6. check the spikes every 1000km & correct if necessary7. with the aid of the fitting tool and a cordless screwdriver, the studs can be gripped & removed

Power screwdriver bit 1/2 inch with plastic sheath, to protect the rim Features: Design: hexagonal (HEX)Features: with protective sleeveDrive size: 1/2 inch (12.5 mm)Wrench size: 22 mmTotal length: 85-86 mmMax. Torque: 961 Nm (97 kg/m) Material: Chrome molybdenum steel (Cr-Mo), forged and hardened Suitable for impact wrench and torque wrench !

Rotatable for individual airflow adjustment Rotating air vent, 60 mm, suitable for a variety of auxiliary vehicle heaters like e.g. Webasto, Eberspächer and Planar.This Webasto air vent also fits our auxiliary heater console.

Secure Stainless Steel Toggle Latch in a Practical Set Versatile lever lock made of stainless steel.This closure is ideally suited e.g. for DIY projects, transport boxes and much more. Due to the quick and easy assembly, this closure is the absolute all-rounder. The robust lever lock is equipped with lock and matching key. Available in a set of 2, 5 or 10 pieces Basic information: spring-loaded stainless steel lockable

Trunkliner for Suzuki Jimny II (model: GJ, year of manufacture: 2018) As one of the last real work animals under the SUV, the Jimny is pretty much abused. And in the interior, it's mainly down the back, on the loading area. Oiling chainsaw, dripping dog, muddy boots or bloody hunting track, our new tailor-made boot tub for the Jimny II is everything that licks, dust, dirty, hair or otherwise can not hold itself. The trunkliner is made of odorless plastic, extremely robust and extremely flexible. Anti-slip keeps dirt out even in off-road driving in the protective shell and the higher edge of dirt prevents leaking liquids spilling into the car interior. Normal residues can be removed with a damp cloth, for cleaning of coarse dirt simply remove the tub from the cart and spray it with the hose. As a perfect complement to the luggage compartment we recommend seat covers and floor mats for the Jimny II.

Ideal for repair and interior installation The set contains different fixings to attach the interior door trim on Land Rover Defender vehicles. One set contains enough fixings for one side door.

Secure hold on rock sliders – especially for Defender 110 & Grenadier These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender 110 and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface. Please note: these pads do NOT fit the Defender 90!

Precisely fitting anti-slip pads for skirt sliders on the Mercedes G-Class These self-adhesive anti-slip pads have been specially developed for the skirt sliders from Abenteuer 4x4 for the Mercedes G-Class. The cut-outs are precisely matched to the hole pattern of the G-Class skirt sliders. They significantly improve the already robust anti-slip properties of the side protection, especially in wet, muddy or snowy conditions.   The pads are supplied in pairs and measure 5.5 x 50 cm - ideal for the entrance area at the doors. If required, additional pads can also be used to completely cover larger areas of the Rockslider. This not only enhances the function, but also the look.Supplied in pairs, one pad each for the left and right side.

Fast & secure connection The adapter converts electircal signal from 7 point connectors to 13 point connectors or vice versa.  The assignment plan comes with each individual adapter, DIN ISO 1724 and DIN ISO 11446. Please choose your desired option.

Sturdy stainless steel strap cramp - for tensioning straps up to 25 or 30 mm - 10 pieces in a set These high-quality stainless steel strap cramps are ideal for the secure and durable fastening of tensioning straps - for example for mounting luggage nets, tarpaulins or for securing loads. They are suitable for all standard tensioning straps up to a width of 25 mm (design version) or 30 mm (classic version).The strap cramp can be firmly screwed into place and reliably holds the strap in position. Thanks to the robust material, the cramps are particularly resistant to corrosion, even when used permanently outdoors or in damp environments - for example on boats, in vehicles or when camping.Ideally matched to the installation of our cargo net NACN90110 or NACN72948, stable and functional fastening solutions can be realised.Variants:     Classic: For strap widths up to max. 30 mm, material: stainless steel A2     Design: For belt widths up to max. 25 mm, material: A4 stainless steel (particularly resistant to seawater) Scope of delivery:10 belt cramps in a set

Climbing aid - Door step Access to the roof of a car is usually something for climbing professionals - especially from the side. This applies to expedition-ready 4x4s with CargoBear-style system carriers that can be climbed by ladder, and especially to SUVs with ski racks or family vans with roof boxes. Often the vehicles are simply too high or the drivers too small or unathletic to get safe and easy side access to the roof load. They try to find a foothold on the seats by groping with their feet while holding on tightly with one hand to avoid tipping over backwards. Or you climb onto boxes or makeshift ladders and let the passenger support you, but who always has ladders or a passenger with them? What fits into the car in any case is our convenient and safe climbing aid for hanging into the body-side locking brackets of the door locks. The ladder replacement is hooked into the catch eye of the latch with a simple, fold-out hook. The pressure of the rubberised rear edge of the step surface on the B- or C-pillar results in an absolutely safe climbing aid under load that does not wobble or slip. This way, you can reach every side of the car roof safely and quickly without much effort. The locking brackets of the car doors have to withstand forces that are many times the weight of the human body so that the door does not open in the event of an accident or attempted break-in. The ladder itself is made of an extremely solid aluminium alloy and is designed to withstand 200 kg. This means that even large and heavy contemporaries need not worry. However, the first use should be carried out with caution and care in order to get the necessary safety when climbing. And to ensure that the paintwork is not damaged, there is an additional rubber protector that can be attached to the edge of the step. By the way, if there is no more room for the foldable door step in the glove compartment or the centre shelf, you can leave the emergency hammer at home, because it has a steel tip at the front and thus also functions as a rescue tool for breaking windows. ATTENTION: not suitable for Land Rover Defender up to MY2016

Intake filter set for your Autoterm parking heater Robust. Reliable. Off-road ready.   This compact intake filter set consists of a short air intake pipe with integrated filter element and a sturdy bracket for secure installation. It reliably protects your Autoterm parking heater from coarse dirt, dust and insects - ideal for dusty tracks, muddy pistes and wild outdoor adventures.   Whether in the desert, forest or workshop - with this filter, your parking heater can breathe freely.  

Secure grip on the loading sill – perfectly tailored for the Land Rover New Defender This upgrade for the Land Rover New Defender (L663, from MY2020) is so discreet,  it’s barely noticeable at all. Even so, it has a big impact, especially in damp or wet conditions. With our custom-made anti-slip pads, the rear bumper becomes a safe climbing step to access roof rack or roof load. No more slipping on a greasy bumper or due to muddy boots.   The 24x13cm (each) sized pads for the corners of the bumper have a robust, abrasion-resistant anti-slip coating on top and a self-adhesive strip on the underside. The material originates in the sports equipment sector and has a proven track record in skateboarding, among other things. The pads’ perfect fit and matte black look, compliments the look of the new Defender perfectly.   Supplied in pairs.  

Now it is no longer necessary to spray with a compressor and spray gun - with our new Raptor Roll-On-Set you can now also apply the popular RAPTOR-coating by yourself without any problems! As an official distributor of the popular RAPTOR-coating we have come up with a simple DIY solution together with the official manufacturer U-POL: since the Raptor-coating, unlike other coatings, does not have to be heated, you can use this roll set. The roll-on set consists of:1x color roller bracket with ergonomic profile3x coarse foam structure rolls in top quality (Ø 35 mm)2x paint trays or paint trays with practical spout nose and integrated measuring strokes (15x32 cm)2x sanding pads for sanding the surface (1x with alumina grain type and 1x with silicon carbide grain type)2x disposable gloves Please refer to the instructions / data sheet for processing instructions.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, white, tintable, black Please note:The color of the tub and the paint roller bracket may differ. Examples of the Raptor coating:

Front Panel for your Nakatanenga Valuables Compartment 2012 – Customize it to your liking Do you own a Nakatanenga valuables compartment from 2012 or later and need a new or simply a different front panel? Then you've come to the right place! This perfectly fitting front panel is specially designed for the Nakatanenga valuables compartment model year 2012. Whether your old panel has been damaged or you simply want to convert your compartment for new requirements – with this front panel, your valuables compartment will be ready for use and securely locked in no time. The front panels are made of robust aluminium and are black powder-coated, making them particularly resistant for off-road use. Depending on your needs, you can choose different versions, for example with cutouts for two sockets (USB or 12V), for three switches, a combination of both, or completely without cutouts if you want to install your own components. This allows you to flexibly adapt your valuables compartment to your individual needs without having to replace the entire compartment. Get the right front panel now and ensure that your valuables are perfectly protected on your adventures! The following models are available: Front panel with cutouts for two sockets (USB or 12V) Front panel with cutouts for two sockets (USB or 12V) and three switches Front panel with cutouts for 3 switches Front panel without cutouts

Efficient airflow distribution T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 60 mm hoses.

VIAIR replacement metal filter housing Suitable for the following VIAIR compressors: 420C Compressor460C Compressor480C Compressor300P Portable Compressor300P-RVS Portable Compressor400P Portable Compressor400P Automatic Portable Compressor400P-RV Automatic Portable Compressor400P-RVS Automatic Portable Compressor440P Portable Compressor450P Automatic Portable Compressor450P-RV Automatic Portable Compressor450P-RVS Automatic Portable Compressor

Wear kit with exhaust pipe for AUTOTERM Air 2D / 4D  For our portable heater boxes, we only use AUTOTERM (previously Planar) Diesel heaters. Since we always have a surplus of original AUTOTERM accessories left over after assembling the units, we’re offering these essential parts as wear kits at an unbeatable special price. This represents a whopping discount of nearly 70% compared to the retail value of the individual parts.The sets will fit AUTOTERM 2D and 4D air heaters and consist of one fuel line, one exhaust pipe including heat insultation and various pieces of fastening materials. These are essential spare parts and replacements to keep handy in case of damage or wear and tear.

Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For the CargoBear, we offer ready-cut, self-adhesive anti-slip pads measuring 16 x 24 cm individually or in sets of 3, 6 or 12. Please note: the multi-packs provide increasing savings regarding the price per item. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.

FIXPLUS brackets - incl. FIXPLUS strap in various lengths Get a grip! This versatile carrying aid is just the thing for you. The combination of a sturdy polyester loop with a comfortable, secure nylon handle and a Fixplus strap is the perfect replacement for cumbersome solutions such as cable ties, cords or ratchet straps.Large and unwieldy objects like heavy hoses, ropes, cables, ladders as well as camping equipment, car accessories, sports equipment and much more are quickly and securely lashed with the Fixplus strap - even with one hand. The Nylon handle allows for comfortable carrying. The components are designed for tensile strength up to 900N/90kg and all materials have been selected to withstand maximum stress and guarantee lasting durability. The flexible Fixplus strap is resistant to UV, heat, cold and seawater.Available with Fixplus strap in lengths of 46 or 66 cm.

Warm air pipe 75mm for AUTOTERM Air 4D (=Planar 44D) parking heater Warm air pipe / flexible pipe / air pipe / warm air hose for effective distribution of warm air. The warm air pipe is optimised for the parking heater AUTOTERM Luft 4D (formerly Planar 44D). However, it is also suitable for Webasto, Eberspächer and Truma heaters.The warm air pipe is supplied according to current stock, so you could get one in black or in brown. Colours: inside silver and outside either black or brownInner diameter: Ø 75 mmPrice per running metre, delivery in whole metres only.

Hammering tool for roof tents & tarpaulins - robust, precise, reliable With our high-quality hammer-in tool, pegs, tent pegs and tensioning systems can be fastened quickly and securely in no time at all - ideal for setting up roof tents, tarps or large tarpaulins.Insertion tool incl. 30 tarpaulin eyelets 

Air vents for individual warm air regulation This vent can be used for all independent vehicle heaters with 60 mm piping, like the Planar 2D auxiliary heater. The vent can not be fitted to our auxiliary heater center console, in which case please use our Webasto vent.

Your Stuff, Your Space – Organization and Quick Access with Nakatanenga MOLLE Pouches! Sound familiar? Important small parts, your multi-tool, or your first-aid kit are nowhere to be found right when you need them urgently? Loose in the footwell, buried deep in your backpack, or somewhere in the vehicle's interior – that's over now! With Nakatanenga MOLLE pouches, you bring system and clarity to your gear. Robust, Flexible, and Always Within Reach: Our MOLLE pouches are made to reliably accompany you on every adventure and to store your most important utensils safely and organized. Indestructible Material: Made from highly abrasion-resistant fabric, these pouches can easily withstand the toughest demands of everyday off-road life and reliably protect your contents. MOLLE-Compatible for Maximum Flexibility: Thanks to the PALS (Pouch Attachment Ladder System) webbing on the back, you can attach the pouch easily and securely to all MOLLE-compatible surfaces. Whether on our Nakatanenga seat covers, backpacks, tactical vests, panels in the vehicle, or on the CargoBear roof rack – you decide where you need quick access. Examples include our MOLLE panels for car seats and our Tailgate Organizers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny, or our universally usable Tailgate Organizers. Thoughtful Organization: Perfect for tools, flashlights, knives, personal documents, snacks, cables, or a small emergency kit. The pouch helps you keep an overview and use your equipment efficiently. Style Meets Function: In the Coyote and Black colors offered here, the pouches not only blend in perfectly visually with your outdoor or off-road gear but also underline your professional standards. Your Companion for More Order: Whether for daily use or on a major expedition – Nakatanenga MOLLE pouches are a small investment that provides much more clarity and quick access. Get your clever organizational helpers now! What is MOLLE? You can find information in the downloads. Material: 100% Nylon And by the way: At Nakatanenga, we exclusively use materials with 100% Nylon PU coating for all textile articles. Unlike PVC, Nylon PU (Polyurethane) is free of harmful phthalate-based plasticizers. Low molecular weight phthalates were, until recently, the most common plasticizers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to exclusively use ecologically and health-wise harmless alternatives such as Nylon PU for coating textile products.

Safe transport for JackAll weighing jacks The transport lock prevents the clacking and loosing of the grip of your Hi-Lift or Hi-Lift X-treme jack. It is also suitable for the various similarly built jack JackAll / HiJack / HiLift / Farm Jack / High Lift / HiLift / High Jack. The functionality is similar to the HiLift Handle Keeper. The illustrated jack is NOT included. Please select the desired color below. Please note:the color may differ slightly from the pictures.

GMB watertight Mounting Adhesive for sand plate holder Defender 1x Watertight glue for sand plate holder, 70 mltemperature resistant -40°C to 90°C colour: white

Manifold T-piece for 75 mm hot air pipes - ideal for AUTOTERM & similar systems T-piece suitable for warm air ducts of Planar 2D auxiliary heaters and other independent vehicle heaters with 75 mm hoses.

Lock for Alu-Box Pro storage box Secure your Alu-Box with this lock for Alu-Box Pro storage boxes.     keyed alike     is inserted into the existing recess     tool-free assembly

Grease for steering knuckles - One Shot Swivel Grease - For all Series I - III, Defender, Discovery and Range Rover models with leaf and coil springs - from 1951 to present day- Lubricates pivots and housing seals, protects balls- Reinforced with solid lubricants, highly resistant to water and salt corrosion- One package of grease is required per steering knuckle    

Map Holder for Sun Visor Organiser Here you will find the ideal supplement for our sun visor organizers Version 2.0. The card holder offers various slots so you always have their parking and fuel cards and the most important debit cards at hand. Thanks to the simple Velcro attachment, you can always easily attach the holder to the sun visor organizer and remove it again.

Cargo rail nut 2.0 available in size M8 and V4A precision casting and thus best suited for exterior use. The nut is held securel in place with the stainless clip and can stay in place all the time. This makes it interesting for interior use, too, e.g. when fixtures have to be removed temporarily from the vehicle and will be fitted to the same place again. There are no protruding bolts, the nut can stay at its place, fitting is facilitated as the clip can cope with lateral force before fully tightening down, too. Once torqued down, the ribbed outer of the nut tightly grabs into the cargo rail, preventing any twisting or movement under load. The cargo rail nut 2.0 allows flush fitting of optional equipment and fixtures as the nut sits level with the rail and does not protrude above it. Additionally the clip acts as a washer, thus increasing the contact area, expecially in the rounded version of the airline cargo rails, while also protecting painting/anodisation. Four markers facilitate to mark the drill centre. Advantages: rustfree - nut made of high-quality V4A precision casting, clip of stainless EN 1.4310 steel simple handling - fit nut, secure with clip, bolt on equipment innovative - can be fitted to ANY part of the cargo rail and doesn't have to be pushed in from the side nut sits level and does not protrude - equipment can be bolted on flush secure - sits securely in the rail and stays where it was fitted - does not get out of place, even with nothing bolted to it. Markers in the clip to facilitate drilling, clip acts as a washer.

1/4 inch 4mm bit screwdriver bit for hexagon socket screws, 30cm long 1/4" screwdriver bit, facilitates various assembly situations, for example that of the CARGOBEAR quick assembly frame.Application:For hexagon socket screwsDimensions:Size 4 mm, length 300 mm