Vehicle accessories

Fender extensions universal This broadening in discreet optics is suitable for vehicles with and without inner edge in the wheel arch. Ideal for widening spacers, wider tires, rims with greater press-in depth, etc. Available in different widths: 18 mm, 23 mm, 28 mm - please select the desired widthLength: 150 cm Suitable for: car, SUV, VAN, trailer, camper, construction machine, agricultural machine, etc. Attention - installation instructions: The adhesive tape that we use for this profile is the best that we have: Article 3M 4222If the extension fender will be applied on a normal situation, we don not need to use Primer.The important is to follow the correct fitting instruction: 1)      Perfect cleaning of the surface that will receive the adhesive tape2)      Position the profile and apply using a strong pressure for all the length of the adhesive tape3)      Correct temperature for the application: minimum + 20°C4)      To be sure that the adhesive tape is working correctly, you can apply a masking tape, to keep the pressure for the next 24 hours5)      Do not wash the car for 48 hours after the application

Durable Butterfly Clasp – Complete Stainless Steel Set Versatile butterfly closure made of stainless steel. It is a sturdy lock with a snap and turn mechanism.This rotary closure is ideally suited for e.g. for DIY projects, transport boxes and much more. The hinged wing is flat and easy to operate. Due to the special construction, the boxes are well protected against accidental opening. Available in a set of 2, 5 or 10 pieces Basic information: not spring loaded stainless steel lockable without shell

Bumper end cap for Defender 90/110 The end cap is a precisely fitting aftermarket quality alternative and fits neatly onto the end of the bumper. The robust rubber material makes it resistant to weather, dirt and minor bumps.   Highlights Neat finish to the front bumper (bumper end) Robust rubber – durable & suitable for everyday use Fits left or right (universal for both sides) Aftermarket quality: as functional as the original, often more attractively priced Ideal as a replacement for missing, cracked or hardened end caps   Suitable for Standard bumper for Land Rover Defender 90/110/130 up to model year 2016   Note on installation and scope of delivery: This is only one corner. If you want to fit a bumper on both sides, you must order the item twice. As a rule, 4 clips are required for fastening per corner. These are not included in the scope of delivery.  

Safely stowed away, quickly to hand: The universal holder ensures that your Jackall trolley jack is held firmly in place - whether on the vehicle, in the workshop or on tour. Robust, practical and can be mounted anywhere

RAPTOR 2K protective lacquer - 400 ml spray can for spot repairs This RAPTOR 2K protective coating is for those who want to use RAPTOR but do not have the appropriate equipment, do not have a large compressor or who want to make improvements quickly without any major inconvenience. Handling the practical spray can is extremely easy. Simply activate the valve on the bottom and you're good to go! Once opened, the spray must be used within 1 hour. After that, it begins to solidify. Ideal for spot repairs and smaller jobs. You get a resistant and extremely durable protective layer. Available in the colors: black and white400ml Application and sample video:   Prepare the spray can & make it ready for use:  

Our popular DABUCKET multi-purpose synthetic fabric bins for off-road, camping and outdoor activities have a new family member. The 5 L DABUCKET TRASH is specifically designed as a garbage container for your car. The idea behind our DABUCKETS is quite simple. The flexible bins are made from 100% Nylon / Polyamide with PU coating which creates a tough and watertight second layer to hold standard size bin liners or garbage bags. The small DABUCKET TRASH takes any standard household 5 L bag, making it the perfect container for all the trash and junk that keeps piling up in your car. The DABUCKET TRASH’s sewn-in Velcro patch will stick to any fleece or regular car carpet, holding the bin firmly in place. You can also fix it to a Keder rail using the attached fastener piece. The small DABUCKET has a 13 cm drawstring sleeve on top. Once pulled shut with the draw cord nothing can fall out and odors are kept inside. You can carry or hang the DABUCKET TRASH by a small loop on the upper rim. This is especially handy because the great outdoors are full of four-legged creatures who will seek out your 4x4 if there is a whiff of food around. Closer to civilization you might encounter fox, rat or racoon and if you’re camped in some of the wilder regions of the planet you might add bear to the list. In these situations, it is advisable to hang anything that smells strongly of food in a tree away from the camp. The DABUCKET Trash comes fully equipped for that purpose. 100 % Nylon /Polyamide with PU-coating guarantees robustness, easy cleaning and no exposure to harmful plastic softeners. Excessive dirt can be removed by machine washing the bin at 30 degree centigrade. Dimensions 5 L:Height 20 cm (without drawstring sleeve)Diameter: 17 cm Available in these colors: Gray-coyoteOrange-coyoteBlackmulti terrain pattern - orangeswedish camouflage pattern m90 This article was designed, produced and tested by our inhouse textile shop. A dedicated team and quick decision making facilitate continuous quality control and improvement of our textile products. And since we have our own textile shop on the premises, it is no problem to discuss custom designs, changes and improvements with you on short notice. If it’s possible, we will do it. Just call or send in an e-mail.

Optimum base for RAPTOR protective coating - with rust protection and adhesion reinforcement RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer aerosol specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces. It contains a blend of anti-corrosive additives to inhibit rust and corrosion.Easy and convenient - activate using the valve on baseNo need for spray equipment

Sun visor mirror for Land Rover Defender The self-adhesive make-up mirror for the standard sun visor of the Land Rover Defender 90/110/130 can be mounted on two different places of the sun visor - see pictures.The mirror is available for either the left or right side of the vehicle and is sold individually. Supplied without sun visor.

Replacement switch for ignition lock The ignition lock switch can often cause problems. If it is defective, you will not be able to start the vehicle. Many people immediately replace the entire ignition switch, but if the ignition switch's turning mechanism is still working properly, it is much cheaper to replace the ignition switch located at the rear of the ignition switch. In this case, this item is the ideal replacement or repair part.

Magnetic Warm Air Connectors and Adapters – flexible, quick, and clean connection With our magnetic adapters for warm air hoses, connecting heating boxes, parking heaters, or other warm air systems is especially easy, quick, and convenient. The components are designed for a practical and clean connection and make coupling and uncoupling much easier – ideal wherever warm air needs to be routed flexibly or disconnected quickly when required. The system consists of the magnetic mounting flange 60 mm and the matching magnetic warm air connector 60 mm, or alternatively the magnetic warm air connector 60 mm, freely rotatable. Important: The mounting flange is the fixed receiving part and always requires a matching connector as its counterpart. Only this combination creates the complete magnetic connection. For additional flexibility, an adapter ring from 60 mm to 75 mm is available, allowing different hose diameters to be connected easily. The magnetic sealing cap fits exclusively on the mounting flange. It is used to close the mounting flange securely and cleanly when not in use. It is not intended for use on the magnetic connector or the freely rotatable connector. The magnetic connection allows quick installation and convenient handling in daily use. This makes the adapters ideal for mobile heating systems, camping conversions, workshop applications, or custom warm air routing in vehicles. Variants at a glance:• Magnetic mounting flange 60 mm• Magnetic warm air connector 60 mm• Magnetic warm air connector 60 mm, freely rotatable• Magnetic sealing cap for mounting flange• Adapter ring for warm air connector 60 mm to 75 mm Important notes:The mounting flange always requires a matching counterpart: magnetic warm air connector 60 mm or magnetic warm air connector 60 mm, freely rotatableThe sealing cap fits only on the mounting flange Advantages:• quick and easy connection of warm air systems• ideal for heating boxes, parking heaters, and custom solutions• convenient coupling and uncoupling thanks to the magnetic connection• clean and practical solution for mobile and fixed installations• flexibly expandable with matching connector and adapter solutions The components are professionally 3D-printed and impress with their high-quality, practical design. Made from nylon 12 reinforced with carbon fiber, they offer high dimensional stability, are heat-resistant and UV-resistant, and are therefore ideal for reliable use in demanding environments. This results in a durable and functional solution for hot-air systems in vehicles, campers, or custom installations. Dimensionally stable even at operating temperatures up to 150 degrees Celsius.

Quickfist Go-Between tool holder Quick Fist Go-Between, pack of 1, clamping range 45 to 73 mm, max. 16 kg per holder Visit our Quickfist product page to see more practical application examples of these ingenious holders.

Fits all MY - TDi, TD5, TD4 2.4, TD4 2.2 with original-bumper Full bolt kit for one bumper - stainless steel bolts for Defender 90/110/130, comes with assembly paste. Do not use in conjunction with a winch or clevis pin bumper!  

Pilot bearing / Guide bearing for all Defender TD4 models (MY 2007-2016) We recommend replacing the pilot bearing when replacing the clutch.

Compressor connection kit with 4 nozzles - suitable for many inflatables Connection kit for all compressors. The kit consists of 5 parts - 1 adapter + 4 pcs nozzle versions. Use a compressor or tyre pump to reach the recommended PSI within minutes. The adapter with its variable nozzle guides is also suitable for most paddle boards (SUP), canoes, rubber boats, swim rings,inflatable beds,kayaks etc.

Mesh helmet bag Anyone who switches on their head for sports and outdoor hobbies wears a helmet. Whether you're cycling, rollerblading, kayaking, climbing, snowboarding or skiing, you can't go without a helmet. And this also applies when the helmet can be a bit of a nuisance during breaks or on the way to and from the sports centre due to its size and weight. With our helmet bag, there is always a fixed place for your head protection. The robust mesh material guarantees ventilation and quick drying, and dust and dirt are no problem either, as the mesh is easy to wash. In principle, this makes our helmet bag just as good as a quick and clean all-purpose bag or wet bag for everything that gets wet and dirty during sport and leisure activities: Running shoes, swimming gear or football equipment. Everything that goes in is in good hands. The mesh bag is pulled closed using a robust, sewn-in cord with stopper and can be attached to rucksacks, bags etc. using four clips with elasticated straps. The system is particularly suitable for our backpack with MOLLE system, for example. The clips can be flexibly inserted into the MOLLE slots on the rucksack, giving the helmet a fixed position and a firm hold. It does not always have to be carried in the hand and does not hang around on the chin strap, where it can easily get caught. The Nakatanenga helmet bag is practical and safe for all those who travel a lot for their hobby. And when the helmet is not in use, the mesh bag can be folded up to miniature size and secured with the attached Velcro loop.Available in grey coyote and black.    

Tool Roll MINI with 12 slots Just roll it up, and do not spend a long time in a dark bag or crate: The Tool Roll Mini is not only a fast, mobile and safe organizer for tools. Twelve slots provide enough space and sorting to have all sorts of basic equipment at hand everywhere. This goes from tools for off-roaders, bikers and cyclists to cosmetic utensils or Arts & Crafts needs such as pens, brushes and carving tools and much more. The Tool Roll Mini is rolled up just over 30 cm long, making it ideal for use on the go. In the cubby box, on the bike, in a backpack or even in a big handbag. During the production of the mannequin, only high quality and durable materials are used. Handcrafted seams hold even after countless rolling and rolling and the PU-coated nylon is easy to clean and odorless. Thanks to its handmade seams, the roll takes no damage even after countless rolls. And so that nothing gets lost in transport, a fixed belt with G-hooks made of aluminium securely holds the Tool Roll Mini together Incidentally, with the Tool Roll Hungry Edition we already offer a ready-made solution for neat dining during picnics or camping, with exquisite cutlery variants and high-quality cutting knives from WMF. You can find our big tool roll here, single modules here. Material: 100% nylonDimensions: 49x30,5 cm (rolled up) MADE IN EU

Flashing - LED 12V The four-pole relay for LED direction indicators prevents the indicators from flashing too quickly and allows the frequency of the indicators to be adjusted. It replaces the factory-fitted relay in the Land Rover Defender 90/110/130. To "activate" the LED indicator relay, the hazard warning lights must first be briefly activated after installation. Then use the rotary control to adjust the relay so that the trailer coupling indicator light goes out in left/right mode.

Bracket for large auxiliary headlights For driving lamps and Vision-X Cannon, stainless steel, black powder-coated.Delivery without headlights, price per piece.- Suitable for all Nakatanenga CargoBear 1 + 2 roof racks!

Sturdy, strong grip, indispensable This robust wheel wrench with 27 mm wrench size is the ideal tool for anyone who regularly works on commercial vehicles, off-road vehicles or motorhomes. Thanks to its solid design, it offers excellent power transmission and enables even tight wheel nuts to be loosened and tightened securely.

U-POL RAPTOR spray gun for applying the coating   Spray gun for applying the coating, for screwing onto Raptor bottles.

We all know the rubber cords used on bike racks to carry stuff. Rusty hooks, worn by sunlight and rain, dangerous handling and not really up to the job anyway - definitely unsuited for tie-down of cargo in a 4x4. An alternative is the tie-down belt produced by QuickFist, who are renowned for their quality load securing products. With a length of 965mm they are suitable for a variety of uses, from securing jerry cans, oxygen or gas bottles or other larger items that are often carried on expedition vehicles, 4x4s, quads/ATV, boats, recovery and emergency vehicles, etc. Their advantages over traditional roof rack straps/luggage spiders are manifold: no rust no rattling UV-resistant weatherproof extendable two different mounting options greater length (965mm strap) wider, so offering better hold (38mm) more robust (6mm thick rubber compound) Please note: The item has traces of storage.  

Carling Contura switch for winch, with mechanical protection. For controlling a winch relay, MOM/OFF/MOM switching,The switch offers the possibility to extend and retract the winch cable as well as a mechanical protection against accidental operation. The switch is used to control an existing relay box of the winch, this is not included!We recommend the additional combination with our switching relay, which switches the winch currentless. In this way, you can relaise a complete winch control with only two compact switches, combining comfort and safety.

Ball head for trailer coupling Article is supplied without fastening material! Technical data: Drawbar load 350 kgD17.2 KNapproved by E11 marking

Durable 90° Stainless Steel Heater Bracket for Parking Heaters This high-quality stainless steel heater holder with 90 ° angle fits the following auxiliary heaters: Planar 2D parking heater Planar 4D parking heater Planar 44D auxiliary heating only with the same flange pattern: Webasto & Eberspächer

Practical storage net for ideal storage of small items Easily create additional space for many small things that you would like to have within reach. The network is ideally suited e.g. for gloves, knives, flashlights, documents, papers and other useful utensils. You can attach the stowage net to the inner door lining so that everything stays in place. Dimensions: 17 cm x 37 cm Mounting material included Note: Mark the position of the net when the door is shot, that it is placed at the correct height and does not touch the seat box.

Autoterm Connection Cable for Control Panel – 7 m With the 7 m connection cable for Autoterm control panels, you can position your auxiliary heater’s control panel much more flexibly within the vehicle. Especially in larger vehicles, camper conversions, cabins, motorhomes, or off-road conversions, the standard cable often does not reach the desired installation location inside the vehicle.   The cable is used in place of the original connection cable and connects the control panel directly to the Autoterm auxiliary heater. This allows the control panel to be conveniently mounted where it is truly accessible for everyday use—for example, in the living area, near the kitchenette, in the sleeping area, or on a central control console.   The connection cable is suitable for Autoterm Air 2D, Autoterm Air 4D, and earlier 44D heaters.   Important: This is not an extension cable, but a replacement connection cable with a length of 7 m.   Advantages 7 m cable length for flexible positioning of the control panel Ideal for campers, recreational vehicles, motorhomes, and off-road conversions Replaces the original control panel cable Compatible with Autoterm Air 2D, Air 4D, and older 44D models Neat solution for greater distances between the heater and the control panel Technical Specifications Cable length: 7 m Application: Connection cable for Autoterm control panels Compatible with: Autoterm Air 2D, Autoterm Air 4D, older 44D models Type: Replacement cable, not an extension cable   Scope of Delivery 1x Autoterm control panel connection cable, 7 m

Universal expanded racing grates, Material: Aluminium, black oxydised, Dimensions 125x20 cm The universal size allows for numerous applications, e.g. a grill, an air-vent, bumper openings, ...

Air scoop, for Land Rover Defender 90/110/130 right or left side, for adhesive, rivet or screw mounting. Material: steel, black

Module for 12 Volt AUTOTERM parking heaters With this module and a suitable radio remote control, you can control AUTOTERM (Planar 2D12 and Planar 44D12) parking heaters. You need the module to assign the parking heater to a channel of a radio remote control. You can thus switch the parking heater on and off by remote control. A connection diagram is included in the scope of delivery.

Ignition Switch Clamp – Land Rover Defender (MY 1986–2007)   High-quality clamp for secure mounting of the ignition switch to the steering column. Fits all Defender models from 1986 to 2007, including TD4. A reliable replacement – built to withstand even tough off-road conditions.You can also find the steering column lock with three door lock cylinders or the matching shear bolt to match the clamp in the shop

Quick Fist Standard (2-pack) - the reliable mount for equipment with Ø 30-50 mm With a clamping range of 30 to 50 mm and a maximum load capacity of 10 kg per mount, the Quick Fist Standard offers a secure and stable mount for a wide range of equipment - from tools and hoses to outdoor equipment.Even with strong vibrations or on uneven terrain, the Quick Fist holds your equipment firmly in place. The mounts are made of robust, UV and corrosion-resistant rubber that remains flexible even in extreme temperatures - ideal for use in harsh conditions.Whether for off-road driving, camping, professional use or in the workshop at home: The Quick Fist Standard impresses with its versatility, durability and ease of installation. A practical fastening system for anyone who wants a secure hold.Please visit our Quickfist product page to find further examples of use for these clever mounts.

QUICK FIST Holder for Jack High Lifts & Stick Winches This Quickfist is suitable for round and square objects of 76-100 mm diameter (round up to 114 mm).Each holder has a payload of 23 kg. The holder can be easily attached with a 6mm screw (not included!). Tested according to AfPS GS 2014: 01 PAK Delivery:1 holderVisit our QUICKFIST product page to see more practical application examples of these ingenious holders. The Hi-Lift shown is not included in the scope of delivery.   Note: The holder can be positioned closer than shown in the picture. Nothing needs to be placed underneath.