Vehicle accessories

VIAIR Air Connection Extension 5 Piece Kit Features: 1/4″ NPT (F) Quick Connect Coupler 1/4″ NPT (F) Quick Connect Stud (2) 1/4″ NPT Compression Fittings (For 1/4″ Line) 15 ft. Air Line Tubing 3 Air Line Clips 5″ Continuous Grommet

Robust hold, elegant look: Bearlight stainless steel mounting rings (7") for Land Rover Defender Our specially made stainless steel headlight bezels once and for all end the dreaded rust problem of the original Defender mounting rims. Suitable for all halogen, clear glass, and LED main Defender headlights by producers like J.W.Speaker, BMAC, Hella, Nolden, Vision-X, Truck-Lite, Wipac, or Sirius. Price is for one pair. Also available in black powder coated - a perfect mix of understatement and technical state of the art! If you work on your lights, why not get the stainless fitting equipment, too.

Side mirror with arm for Land Rover Defender 90/110/130 Suitable for all model years, also Series III, if later hinges have been retrofitted. Fits driver and passenger side. Measures mirror: approx. 140x200 mmLength arm: approx. 140 mm

Replacement rubber pad for the rear or side step of the Defender This cover protects your step so that you can enjoy it for a long time.  The tread protector has a tire tread pattern and is suitable for either the rear or side step (please select under “Variant”). Suitable for all Defender models. You can find a matching step here: Rear step or side step

Mirror heating foil These heaters are ideal for the exterior mirrors of any Land Rover Defender and vehicle with similar exterior mirror dimensions. Studded and frozen exterior mirrors are then yesterday's snow! You can easily attach the foils according to the following steps: 1. Remove the white protective foil on the back of the heating foil.2. Stick the heating plate on the cleaned mirror back.3. Connect the connections to the power source.4. Insert the mirror back into the mirror holder Dimensions: 165 x 111 mm Delivery is in pairs

Quickfist Rifle Mount Two-piece set, for horizontal or vertical mounting of numerous rifles, can be used with or without scope.1-pack, max. 45.3 kg per holder set, delivery without rifle.

Simple control panel (PU-5) for Planar parking heaters The control panel offers easy operation of the Planar parking heaters. The heater can be switched on or off manually via the control elements. Furthermore, the heat output can be regulated via the control panel.Control elements: Planar-5M  1. switch ventilation off/on2. switch heating on/off3. LED light to indicate the status of the heater    - yellow light = heater running    - slow, red flashing = malfunction4. LED light for status display of ventilation    - Green light = ventilation running    - green flashing = ventilation off    - yellow light = heating and ventilation are on together5. rotary control

Sun visor organiser - Made in Germany   Want more storage space and organisation in the interior? The Nakatanenga sun visor organiser is hard to beat in this respect. With this organiser, you can keep all your small items lying around in the vehicle within easy reach, e.g. parking passes and discs, vehicle documents, fuel or other cards, glasses, writing materials, small tools such as multitools or seatbelt cutters and much more.   The universal organiser made of robust and easy-to-clean nylon is 290 mm wide, fits in almost all vehicles and has a zip pocket and MOLLE loops. It is attached using Velcro straps.    The organiser becomes even more versatile with the separately available card holder for all parking, fuel, membership or bank cards or the mirror for insertion into the MOLLE loops.   The Nakatanenga sun visor organiser is available in the following colours: - black - grey

Cable winch bundle 3-piece - Robust. Safe. Complete Our 3-piece cable winch bundle is the ideal solution for anyone who prioritises quality and reliability. Perfectly matched and ready for immediate use - whether off-road, in the workshop or in the forest.   Included in the set: Steel cable - Heavy-duty cable with high tensile force, abrasion-resistant and durable - approx. 8mm cross-section and approx. 25m Pulley window - Guides the rope gently and prevents damage caused by friction Winch hook - Solid hook with safety catch for reliable work Suitable for most winches Quick assembly Maximum safety and control when pulling and recovering Picture similar!  

Bumper mounting kit - Land Rover Defender The mounting kit is specially designed for mounting the bumper on the Land Rover Defender. It contains all the necessary fasteners for secure and precise installation and is ideal for repairs or replacing original screw connections.

Mounting rings for speakers - suitable for Land Rover Defender Better sound quality, perfect fit: With these mounting rings, you can install new speakers quickly and cleanly in your Land Rover Defender - without any DIY solutions or improvisation. For easy installation of 100 mm or 130 mm speakers in the Land Rover Defender, either flat (16 mm) or deep (27 mm) design. Scope of delivery: 1 pair

Stainless steel mounting set for floor panels in the footwell 2nd row of seats, for Land Rover Defender and Series. Fastening set includes the parts for driver and passenger side.  You can find the right mounting kit here for securing the floor panels in the front footwell.

Tear Off Base for Nakatanenga Messenger first aid bag The ‘Tear Off Base’ base plate for our messenger first aid bag Dimensions: 170x150 mm, with 4 eyelets for screwing to a flat surface. The first aid bag can be secured with a strap and ‘torn off’ from the Velcro surface with a handle and reattached after use. Note: Delivery does not include the bag. This is for illustration purposes only.

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag

Cardan shaft wrench 9/16” - special tool for cardan shaft assembly When things get tight, this wrench comes into play: our cardan shaft wrench with a length of 150 mm and 9/16” wrench width is the ideal special tool for working on cardan shafts Technical data: Length: 150 mm Outer diameter: 20 mm Drive: 1/2” square Width across flats: 9/16”  

Window well trim for Defender Available in the following versions:- Window well trim (pieces) front left or right, for all Defender 90/110 (for 1x left and 1x right, simply order 2 pieces).- Window well trim (piece) rear left, for all Defender 110/130- Window well trim (piece) rear right, for all Defender 110/130

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.

Stainless steel bed strip for the Land Rover Defender 90 and 110 The loading area bar is made of corrosion-resistant stainless steel and replaces the corrosion-prone original loading area bar. Since the original screw heads occasionally tear off, the hole pattern is slightly offset. So new holes have to be drilled. The delivery includes stainless steel screws.

Heating sleeve for fuel filter, universally applicable Powerful 100 W heating sleeve for fuel filters with a diameter between 73-95 mm. For universal fitting - if controls already exist.The sleeve prevents the gelling of fuel in colder temperatures and can be fitted to any vehicle with 12 V. Compared to customary sleeves this silicone heating sleeve is very flexible and can be fitted to many diesel filters. The sleeve guarantees ideal heating as it sits closely to the filter. Comes with powerful Velcro strips for fitting. Suitable for filter elements with a diameter from 73 to 95 mm. In cold climates your diesel fuel is prone to gelling as paraffin crystals form which turn the fuel flaky. As a result the fuel stops running through the filter and your engine loses power until it finally stops. Once the filter is blocked, it can only be freed by inducing heat. By emitting this heat and transferring it to the filter, our heating sleeve prevents the clogging of the filter element. The paraffin crystals are immediately dissolved by the induction of heat and the fuel can easily pass the filter again. A ready to fit version with crimped plugs and wiring harness (incl. time relay and push-button) can be purchased here in our online shop. Technical details:Maximal heat resistance of insulation: 300 °CMaximal operating temperature: 250 °CVoltage: 12 V or 24 VOutput: 100 W Comes with: - silicone heating sleeve- 2 strong velcro straps

Chequer plate tank filler neck for the Land Rover Defender 90/110 All model years, emphasises the rustic vehicle appearance.The use of anodised aluminium has the advantage that the panel does not oxidise on the vehicle. In addition, various powder coatings are optionally available, also in the colour of your choice (please specify RAL tone!) - please select the desired surface finish below.

Top sun visor organizer set Where to go with all the little things in the vehicle? Here there is more storage space in a double pack! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle.The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, pens, notepad, small flashlight, multitool etc. The Organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Width of the organizer is 290 mm.Material: 100% nylon The Nakatanenga sun visor organizer is available in the following colors: green-brown coyote sand Universally applicable for all vehicles! The mirror & patch are not included. *compared to single purchase

Front left and right mud flaps for the Land Rover Defender This set consists of a pair of high-quality mud flaps for the front axle - suitable for the Land Rover Defender 90, 110 and 130 models from model years approx. 1987 to 2016.Made from flexible, robust rubber, the mud flaps offer reliable protection against splash water, mud and stone chips. They specifically protect the sides, doors and lower edge of the vehicle from dirt and damage - especially when driving off-road or in bad weather.In addition to improved protection, the use of mud flaps also helps to maintain the value of your Defender: By reducing moisture and dirt deposits, corrosion is effectively prevented. The reduced dirt ingress also makes vehicle maintenance considerably easier.The mud flaps are a cost-effective replacement for worn or damaged original parts - in solid quality and a perfect fit for the models mentioned.Mounting instructions:Suitable brackets are required for mounting, which are not included in the scope of delivery. You can find the appropriate brackets here.Care recommendation:Regular cleaning and checking for cracks or wear extend the service life of the mud flaps and maintain their protective effect.Scope of delivery: 1 pairDifferent variants, choose the version that suits you!

Chequer plate bumper pads  For Land Rover Defender, protects the bumper and provides a secure hold. Delivery in pairs, incl. rivets Material: Aluminium Material thickness: 2.5 mm base thickness / 4 mm incl chequer plate (quintet plate)

Safety nut set - optionally M10, M8 or M6 1 Set of Security Nuts & WrenchesSecure your valuable accessories firmly to your Land Rover with these tamper proof nuts. Ideal for securing your winch and front bumper. Each set contains 4 nuts and 1 key.

 U-POL RAPTOR Coating - 1 Bottle Kit, Coating & Hardener, Black Raptor-preparation-processing-instruction-560The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the right thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in black or self-colourable. Please select your desired product under "Variant".Suitable for application:    Standard RAPTOR spray gun    RAPTOR spray gun with adjustable spray nozzle for better texture adjustment     Roll-on set (application via paint roller)For preparation of the substrate we recommend    MIPA Etch-Primer    U-Pol universal adhesive primer spray    U-Pol etch primer    1-component plastic bonding agentThe RAPTOR coating can be combined with RAPTOR epoxy primer or RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please observe the processing instructions provided under documents.Why the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery:    1x 710 ml coating    1x 240 ml hardener

Cover for winches Winches are by their very nature tough pieces of equipment but as with most mechanical devices, it is easy to underestimate the negative effects caused by exposure to weather, chemicals and physical strains. Rainwater, ice, salt, mud and gravel can affect more than just the looks of your winch. In the worst case, constant exposure to environmental stresses can reduce the performance by a few, possibly decisive percent. Synthetic winch ropes for instance are especially vulnerable to UV radiation. An increasing number of technical experts are therefore calling for mandatory covers for car winches. Our protective winch cover will help you shield your expensive kit from unnecessary damage and will keep it shipshape for your next mission. The softshell cover is light and elastic, fitting most winches by various brands. As with most of our textile products, the cover is quality Made in Germany.  Dimensions: 48 cm x 7/20 cm x 20 cm (LxWxH), suitable for many winch types and brands, measured unstretched Material: softshell

The stainless steel mounting kit - suitable for all CargoBear roofracks Is for mounting various brackets on the CargoBear system roof rack or on the Cargobear crossbar - e.g. the CargoBear quick mounting frame is attached with this mounting kit (the mounting kit is already included with the quick mounting frame). The kit consists of 4 stainless steel sliding blocks with matching M8 stainless steel screws. The long screw makes installation easier, as the sliding block can be easily positioned with it (see 2nd and 3rd picture). Dimensions of a sliding block: Length: 65 mm Width: 18.5 mm Height: 6 mm Material:  Stainless steel Please note: The CargoBear can generally be fitted to a vehicle with a lifting roof/camping roof, but a few things must be taken into account. Please contact us for more information. Suitable for all CargoBear 1 + 2 roof racks! Tip for even easier installation: With the CargoBear slot nut installation aid (set of 4), you can reliably position and secure the slot nuts in the desired location. This makes it easier to attach accessories and mounts—especially in hard-to-reach places.      

The RAPTOR coating from U-POL - the right solution for every taste!Looking for a unique transport surface coating? Then the RAPTOR coating from U-POL is just the thing! Unlike other coatings, the RAPTOR coating does not need to be heated. It can simply be sprayed on and then hardens. We offer the 1-litre version in a colourable version. Suitable for application:     Standard RAPTOR spray gun     RAPTOR spray gun with adjustable spray nozzle for better texture adjustment     Roll-on set (application via paint roller) We recommend preparing the substrate:     MIPA Etch-Primer     U-Pol universal etch primer spray     U-Pol etch primer     1K plastic adhesion promoter The RAPTOR coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. One litre (750 ml coating + 250 ml hardener) of RAPTOR is sufficient for approx. 3 m².Please follow the application instructions under documents.Why use the RAPTOR coating?+ PROTECTION: The coating offers excellent UV protection and protects against rust, corrosion, moisture and extreme temperatures thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option of creating smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface+ COLOUR CHOICE:The multi-purpose coating can be tinted to the colour of your choice or sprayed over with different colours.Scope of delivery: - 1x 710 ml coating - 1x 240 ml hardenerClassification according to the CLP Regulation Symbols GHS02: Flame GHS07: Exclamation mark Signal word Danger! H-phrases H222 - Extremely flammable aerosol.H229 - Pressurised container: May burst if heated.H317 - May cause an allergic skin reaction.H319 - Causes serious eye irritation. Safety instructions P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke.P211 - Do not spray on an open flame or other ignition source.P251 - Do not pierce or burn, even after use.P280 - Wear eye protection, protective clothing, protective gloves.P337+P313 - If eye irritation persists: Get medical advice/attention.P410+P412 - Protect from sunlight and do not expose to temperatures exceeding 50 °C. EUH phrases EUH204 - Contains isocyanates. May cause allergic reactions.EUH066 - Repeated exposure may cause skin dryness or cracking.Unknown acute toxicity (CLP) - SDS : 0.35% of the mixture consists of one or more component(s) of unknown acute toxicity (inhalation (vapours))

TREKFINDER door protection - door handle shells for Suzuki Jimny II (GJ/HJ) The robust door handle moulding set from TREKFINDER reliably protects the sensitive areas around the door handles from scratches and damage - ideal for everyday and off-road use. Made from black plastic, suitable for the right and left side of the Suzuki Jimny II (model GJ from 10/2018 and model HJ).

Practical Shoulder Strap for diffrent Recovery Tracks It takes a lot to get a 4x4 stuck in some sand or mud and if there is no going forwards or backwards, Recovery Tracks are usually one of the first and best solutions. To make operating these Recovery Tracks now even more intuitiv the versitile and robust shoulder straps can be used in various ways.    The strap can easily be attatched and detached from the track. The sewed on net-pocket contains an additional strap, which can be attatched right to the track, this way the tracks can be easily pulled back out of the deepest mud without you having to get dirty yourself.  100% NylonBuckle: Decal / ITW / Duraflex

Socket nut holder How can you improve our ingenious Tool Rolls when it comes to making them more compact, more functional and even quicker to access? By adding one or two of our ½“ and ¼“ organizers for socket wrench sets, of course. It’s really easy, attach the socket organizer’s Velcro strap to the Tool Roll’s fleece, push the sockets onto the studded clips and roll the whole thing up. There you go, that’s order and organization for you. No more fumbling around in oily pouches or cluttered boxes to find the right sockets. The high-quality holders feature 8 studs each for half or quarter inch sockets. The smaller Tool Roll S fits one organizer, the medium M will fit two across. The studded brackets holding the sockets sport metal ball bearings, just like a quality ratchet, thereby guaranteeing a firm and secure grip during storage and transport. Additionally, the individual brackets can be shifted (or removed entirely) to accommodate different socket sizes. Inside the Tool Roll, the organizer is held in place by a robust Velcro strip made from sturdy Nylon and strengthened by a plastic plate. The organizer rail in turn is attached to the Velcro strip by two elastic straps. That way you can easily take out the organizer rail or swap it for another one, without compromising the exact positioning within the Tool Roll. If you’re used to packing your roll really tightly, you will appreciate this detail. Sockets are NOT included in the scope of delivery! 

Front floor mounting set, stainless steel for Land Rover Defender Stainless steel fastening set for floor panels in the front footwell, for Land Rover Defender Fastening set includes the parts for driver and passenger side.Ideal for Nakatanenga storage compartment footwell - Land Rover Defender. You can find the right mounting kit here for securing the floor panels in the footwell of the second row of seats.