Vehicle accessories

Nakatanenga Mirror Bag for Sun Visor Organiser This mirror pocket can be attached to the sun visor organiser. On the inside of the mirror pocket is a large fleece area to which a mirror can be attached with Velcro dots. On the outside there are 4 Velcro points with which you can place the mirror bag on the sun visor organiser as required.The mirror with Velcro dots, which is available separately from us, can thus be folded up or down. Even when the sun visor is folded down, you will not be irritated by reflections from the sun or other reflections.The mirror is not included. Picture may differ.

Heater piping / flexible piping / air pipe for efficient distribution of heater air. The piping is specially tailored to suit the Planar 2D auxiliary vehicle heater, but also fits Webasto, Eberspächer and Truma heaters. Supplied according to stock, i.e. you can reveive either black or brown. colour: silver inner with either black or brown outerdiameter: Ø 60 mmprice per metre, only sold in full metre lenths 

Webasto pipe connector / double socket, with 60 mm connection Warm air pipe connector for effective distribution of warm air. The warm air pipe connector can be used to connect two warm air pipes with each other. Diameter: Ø 60 mmPrice per piece

Adapter / Reducer 90-60 and 75-60 Warm Air Pipe for Parking Heaters With this adapter or reducer you can reduce the warm air duct of a parking heater from a 90 mm warm air pipe to a 60 mm warm air pipe.The 75-60 adapter is intended, for example, to connect a 75mm warm air pipe with a 60mm connection piece.

Clamp lock or also called lashing strap with clamp lock are ideal for securing loads in cars, trailers, vans or lorries. Quick and easy to use, they can be used to bundle wood, secure boxes on a pallet and much more. Scope of delivery: 1 piece 25mm wide 2m long for 400kg tensile force

FIXPLUS Strap 86cm long, in the colours black or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious.     Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening     Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching     secure: guarantees a stable hold even with strong vibration & impacts, even after frequent use, tear-resistant, elastic and flexible     durable: heat and cold resistant (-30°/+60°C), seawater resistant, UV-resistant FIXPLUS Strap 86:         in the colours black or orange         86cm long         2.3cm wide         50g light         circumference up to 81cm         Pulling force: 900N / 90kg         Can be assembled and therefore extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach items of equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

The ideal connector for evenly distributing warm air in a 60 mm system across two strands e.g. in a camper van, van or expedition vehicle If you want to distribute the warm air from your parking heater evenly between two outlets, this Y-piece (60 × 60 × 60 mm) is the perfect solution. Its symmetrical design allows the air flow to be distributed evenly between two pipes – perfect for well-designed warm air distribution in 60 mm pipe systems.   Your advantages Symmetrical distribution for even warm air distribution Suitable for 60 mm warm air pipes/hoses Ideal for parking heater warm air systems (e.g. Autoterm/Planar and other 60 mm systems) Compact and lightweight – easy to install and lay the pipes   Technical data Design: Y-piece, symmetrical Connection size: 60 / 60 / 60 mm Manufacturer: Autoterm Tip: For a permanently secure connection, the warm air pipes should be pushed on cleanly and secured with suitable clamps if necessary.

Performance is one thing and, as is well known, there is no mistaking the polyurethane coatings from RAPTOR: Long-lasting UV and rust protection and high resistance to chemicals of all kinds are guaranteed - provided they are used properly. But the RAPTOR look is of course not entirely unimportant. In addition to various textures from smooth to rough, extremely cool color combinations can also be achieved very easily. Our selection of original RAPTOR COLORS is specially tailored to the RAPTOR multi-purpose coating. There are no surprises or trial and error when mixing, using or with the result. The whole work process runs with the usual RAPTOR precision and the typically simple handling: Simply put the contents of a 45ml bag in the 1L bottle of coating, then add the hardener, shake for two minutes and get started. Detailed instructions on how to achieve different textures when spraying are included. Of course, as with any painting job, a color test is recommended. Available in the colors Beige, Light Brown, Sepia Brown, Green, Light Green, Pine Green, Orange and Olive. And another tip: since every RAPTOR COLOR color bag is precisely matched to a bottle of coating in terms of quantity, when ordering larger quantities, it may be cheaper to use our 4-bottle RAPTOR coating kit than with individual bottles. Reduced colors:  Only while stocks last

6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P.  Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck

HD shackle "Orange Pin" High-tensile shackle "orange pin" with collared pin, rated for 3.25 tonnes, minimum breaking load 16 tonnes, bolt diametre 18 mm. Important notice: the omega-shaped shackle allows for easier lacing and secure use with recovery ropes and tree straps as these are not "squashed" to the same degree as with conventional shackles. Please note:The color of the bolt may differ from the color shown.

Universal handle - Provides support where support is lacking - sizes M and L This handle is a great solution where support is lacking. The attachment is simple, ingenious and stable. The holder can be attached with rivets or screws wherever an additional or new handle is required. Areas of application can be, for example: inner car door, as an entry aid on the vehicle, on airline rails, on crates, on the Cargobear and on other roof racks as well as a replacement or supplement for all carrying systems. The handle can also be used for your interior fittings, e.g. for flaps and drawers.   Due to the flexible material, the handle is very space-saving and prevents the often painful ‘getting caught’.   Material: 100% nylon with PE reinforcements Dimensions size M: Total length: 18 cm Width: 5 cm Distance between the mounting holes: 13 cm Recommended mounting hole spacing: approx. 12 cm Size L dimensions: Overall length: 23,5 cm Width: 5 cm Distance between the mounting holes: 18,5 cm Recommended mounting hole spacing: 16,5 cm Available in: black and grey Set of 1 and 4 Mounting material is NOT included in the scope of delivery!  Please note:  The item supplied may differ slightly from the photo shown.     

Magnetic Warm Air Connectors and Adapters – flexible, quick, and clean connection With our magnetic adapters for warm air hoses, connecting heating boxes, parking heaters, or other warm air systems is especially easy, quick, and convenient. The components are designed for a practical and clean connection and make coupling and uncoupling much easier – ideal wherever warm air needs to be routed flexibly or disconnected quickly when required. The system consists of the magnetic mounting flange 60 mm and the matching magnetic warm air connector 60 mm, or alternatively the magnetic warm air connector 60 mm, freely rotatable. Important: The mounting flange is the fixed receiving part and always requires a matching connector as its counterpart. Only this combination creates the complete magnetic connection. For additional flexibility, an adapter ring from 60 mm to 75 mm is available, allowing different hose diameters to be connected easily. The magnetic sealing cap fits exclusively on the mounting flange. It is used to close the mounting flange securely and cleanly when not in use. It is not intended for use on the magnetic connector or the freely rotatable connector. The magnetic connection allows quick installation and convenient handling in daily use. This makes the adapters ideal for mobile heating systems, camping conversions, workshop applications, or custom warm air routing in vehicles. Variants at a glance:• Magnetic mounting flange 60 mm• Magnetic warm air connector 60 mm• Magnetic warm air connector 60 mm, freely rotatable• Magnetic sealing cap for mounting flange• Adapter ring for warm air connector 60 mm to 75 mm Important notes:The mounting flange always requires a matching counterpart: magnetic warm air connector 60 mm or magnetic warm air connector 60 mm, freely rotatableThe sealing cap fits only on the mounting flange Advantages:• quick and easy connection of warm air systems• ideal for heating boxes, parking heaters, and custom solutions• convenient coupling and uncoupling thanks to the magnetic connection• clean and practical solution for mobile and fixed installations• flexibly expandable with matching connector and adapter solutions The components are professionally 3D-printed and impress with their high-quality, practical design. Made from nylon 12 reinforced with carbon fiber, they offer high dimensional stability, are heat-resistant and UV-resistant, and are therefore ideal for reliable use in demanding environments. This results in a durable and functional solution for hot-air systems in vehicles, campers, or custom installations. Dimensionally stable even at operating temperatures up to 150 degrees Celsius.

Twin USB 4.2A installation socket, 2x USB, with 2x 2.1A charge current, protective cover. This socket can bei either fitted direcly (dash panel, cubby box, cupboard, etc.) or into a mounting frame (single, double, triple). Please ensure adequate fuse protection! Can also be used in the standard 29mm cigarette lighter recess as used on many vehicles. Comes with lock nut and cover.  

Set of 2 FIXPLUS straps in lengths of 15cm, 23cm, 30cm or 40cm Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Can be used on many sides: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden easy one-handed operation: super-simple quick release fastener, no snapping back, no scratching secure: guarantees a stable hold even with strong vibration & knocks, even after frequent use, tear-resistant, elastic and flexible durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant Set of 2 FIXPLUS Strap 15: in the colours black or orange 15cm long 1.25cm wide 5g light Circumference up to 10.5cm Tensile force: 650N / 65kg Can be joined together and therefore extended Set of 2 FIXPLUS Strap 23: in the colours black or orange 15cm long 1.25cm wide 7,5g light Circumference up to 20cm Tensile force: 650N / 65kg Can be joined together and therefore extended Set of 2 FIXPLUS Strap 30: in the colours black or orange 30cm long 1.25cm wide 9g light Circumference up to 27cm Tensile force: 650N / 65kg Can be joined together and therefore extended Set of 2 FIXPLUS Strap 40: in the colours black or orange 40cm long 1.25cm wide 12g light Circumference up to 37cm Tensile force: 650N / 65kg Can be joined together and therefore extended    

FIXPLUS Strap 66cm long, various colours Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious.     Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening     Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching     secure: guarantees a stable hold even with strong vibration & impacts, even after frequent use, tear-resistant, elastic and flexible     durable: heat and cold resistant (-30°/+60°C), seawater resistant, UV-resistant FIXPLUS Strap 66:         in the colours black or orange         66cm long         2.3cm wide         38g light         circumference up to 61cm         Pulling force: 900N / 90kg         Can be assembled and thus extended

Tool Roll - modular tool bag The principle of Tool Roll is as ingenious as it is old: roll out instead of junk. The square fits into the round, remains always at the intended place and therefore takes less space altogether. Can you still improve that? We say yes. The newly developed, modular Nakatanenga Tool Roll owes its added value to our experience as an off-roader, screwdriver and also as a fan of tactical equipment. Large Velcro surfaces on the baseplate make our tool roll freely populated and extremely flexible. Depending on the size of the baseplate, it is possible to attach a maximum of eight separately available tool bags in four rows. A bag of size M correspond exactly to two of the size S. Through this modular system you take then only the tool sets, which are really needed. And we also thought about it: Loose bits and pieces find their place in the sewn-in mesh pockets. The Tool Roll rolls up clean even with maximum placement and is quickly closed or opened with two clip closures. Carrying handle and shoulder strap mean easy transportation. When deployed, the Toll Roll on the D-rings (two or three depending on size) is hung on the wall, on the vehicle or on the tree in the field. Robust, high quality nylon is our material of choice. With the choice of different sizes and combinable bags you will find as a mechanic, handyman, biker and cyclist guaranteed your own, optimal NakatanengaTool Roll combination. Material bag / base plate: 100% nylon (buckles: Duralfex / ITW / Dekal) Dimensions:Magnetic plate: 10x10 cmWorking document Gr. S: 80x45 cmWorking document Gr. M: 80x24 cm MADE IN EUROPE

U-POL RAPTOR Traction anti-slip additive - 200g 1x 200 g resealable packNon-slip additive for surface coatings. It can be added to RAPTOR multi-purpose coating directly before spraying.Using RAPTOR TRACTION with RAPTOR gives a non-slip surface to BS 7976-2.One 200 g pack is sufficient for one bottle of RAPTOR multi-purpose coating (spray bottle).Why use RAPTOR multi-purpose coating?+ PROTECTION: The coating provides excellent UV protection and protects against rust, corrosion, moisture and extreme temperature thanks to ideal sealing. Resistant to fuels, hydraulic oils, animal urine, salt water, etc.+ UNIQUE TEXTURES: You have the option to create smooth or textured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a shimmer.+ CHOICE OF COLOUR: The multipurpose coating can be tinted to the colour of your choice or sprayed over with different colours.You can order the Raptor multi-purpose coating separately here in the shop:1 litre, dyeable1 litre, black4 litres, blackExamples of the Raptor coating:  

Lashing rail accessories - M8x45 screw fitting with nut and washer The M8x45 screw fitting is a practical accessory for lashing rail systems. It is supplied with a nut and washer and is ideal for securely fastening load securing elements. Thanks to the standardised thread size M8 and the length of 45 mm, it is versatile and provides a reliable connection.

Promises reliable hold when you need it! This suction cup with a fixed mounting ring can be mounted on smooth, clean and stable (vehicle) surfaces. The maximum load is about 10 kg. Easy and quick attachment for awnings, tarp's or other elements. This screwless suction cup with its approx. 240 g and a diameter of 115 mm is transported quickly and easily. Technical details: Weight: approx. 250 gLoad: max. 10 kgDiameter: 115 mm Delivery:1 suction cup with fixing ring

Y-Piece 60-60-60 mm Asymmetrical Warm Air Distributor This asymmetrical Y-piece expands your 60 mm warm air ducting system and splits the airflow into two outlets – ideal for efficiently heating multiple areas in a camper, van or motorhome. Thanks to the 45° branch, warm air can be directed precisely where it is needed, while the main duct continues to be reliably supplied.   Key benefits at a glance:   Asymmetrical airflow distribution for targeted heat management – not a 50:50 split, but approx. 2/3 : 1/3, perfect when one area requires more heat than another   Compatible with all common 60 mm warm air hoses used with heaters such as Autoterm, Eberspächer and similar systems   Robust and practical solution for extending your auxiliary heater’s warm air distribution   Ideal for customizing heat distribution in your vehicle and supplying multiple warm air outlets.

Durable Butterfly Clasp – Complete Stainless Steel Set Versatile butterfly closure made of stainless steel. It is a sturdy lock with a snap and turn mechanism.This rotary closure is ideally suited for e.g. for DIY projects, transport boxes and much more. The hinged wing is flat and easy to operate. Due to the special construction, the boxes are well protected against accidental opening. Available in a set of 2, 5 or 10 pieces Basic information: not spring loaded stainless steel lockable without shell

Installation accessories for parking heater boilers We recommend the following accessories for connecting the boiler and the heater: Pressure reducer adjustable 1-5.5 bar with pressure gauge and 2x hose nozzle 10mm Protect the sensitive components (boiler, drinking water filter, but also e.g. simple plastic pipe connections) of your pressurized water system. With a maximum inlet pressure of 16 bar, this pressure regulator with pressure gauge can also cope with the most powerful pressurized water pumps in touring vehicles and boats. Its outlet pressure is infinitely adjustable between 1 and 5.5 bar.Specifications: Max. Operating pressure, inlet side: 16 bar Pressure setting range, outlet side: 1 - 5.5 bar Factory setting: 3 bar Max. Max. operating temperature: 80 °C Pressure gauge scale: 0 - 10 bar Operating medium: Water Connections 1/2" and 1" female thread (ISO 228-1) Length incl. hose nozzles: 139 mm Scope of delivery: Adjustable pressure reducer 2 x hose nozzle 10 mm Pressure gauge   Water pressure system - pressurized water pump & pressurized storage tank 12V in a set The heavy duty water pressure pump with bypass system, 4 bar pressure and 18 liters flow rate per minute and the 1 liter accumulator tank are the ideal combination for your pressurized water system.Together they enable smooth operation with sufficient water pressure - even when filtering.Reduced pump cycles also lead to a long service life. Its ease of repair also makes the pump a sustainable choice.Scope of delivery: Accumulator tank Pressurized water pump Pre-filter 4x 10 mm 1/2" NPT connection nozzles   Adapter Webasto hot air duct 60mm to 90mm Attention: 90mm inner diameter. A 90mm warm air pipe will not fit. In this case, a 90mm pipe connector (ArtNo. 18067) must be used. This adapter suitable for rather rare applications such as adapting 60mm hot air pipe to e.g. boilers with 90mm connection. Please note that you should never reduce the throughput of the hot air pipework of an air heater (i.e. do not reduce from 90mm to 60mm). Note: further installation accessories for parking heater boilers can be found HERE in the store.

Shear bolt for steering column lock Note: When replacing the steering column lock, 2 of these shear bolts are required. Suitable for DEFENDER 1986 - 2007.

Stable connection for your lashing rail - screw fitting with M8x45 Our screw fitting with M8 nut is the ideal solution for securely fastening accessories or loads to standard lashing rails. Thanks to its robust design, the fitting guarantees reliable fastening - even under high loads. Installation is quick and easy: the fitting is inserted into the lashing rail and securely screwed in place with the M8 nut supplied. M8x45 screw fitting, with nutMaterial: galvanized steel

Slot nut for gutter/rail for New Defender Slot nut for NewDefender 1x M8 thread Stainless steel suitable for NewDefender Rail

Set of 5 self-adhesive anti-slip strips for round tubular ladders Rear ladders have two functions: they are designed to make access to a roof rack easier and safer. In terms of safety, especially ladders made from round steel bars, e.g. the ones for the Suzuki Jimny II, can be significantly improved. Our set of 5 self-adhesive anti-slip strips ensure that the steps remain safe when it’s wet or when wearing dirty shoes.    The adhesive strips are extremely robust and durable. With dimensions of 13.5 x 2.5 cm, they are specifically designed to fit the round ladder of the Jimny, but can also be used on other similarly sized steel bar components, of course.   Included: 5 strips 13.5 x 2.5 cm Color: Black   Important note: The strips do NOT fit on our own Jimny rear ladder (CGB2-SUJI2-LADDER), only on tubular ladders from other manufacturers.  

Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For our spare-wheel strap-on step, we offer ready-cut, self-adhesive anti-slip pads measuring 12 x 13.5 cm in twin packs. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.  

FIXPLUS Strap 46cm long, various colours Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous spring-back and, above all, is reusable. Simple! Ingenious. Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching Secure: guarantees stable hold even with strong vibration & knocks even after frequent use, tear-resistant, elastic and flexible Durable: heat & cold. resistant (-30°/+60°C), seawater-resistant, UV-resistant FIXPLUS Strap 35: available in different colours 46cm long 2.3cm wide 27g light circumference up to 40cm tensile force: 900N / 90kg can be assembled and thus extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

Adaptor Plate for Brake- and Fog-Lights -  Land Rover Defender previous to Model year 1998 This adaptor (1 piece) allows you to mount round breaklights and fog lights to older Defender models (previous to MY1998). This plate is compatible with your standard lights and our own LED lights.

Wheel nut for steel rims suitable for New Defender, Discovery 3 / 4. The hard and extremely durable surface finish of these wheel nuts comes from a designated specialist company. The wheel nuts have a double Zintek 300B and Zintek Top treatment and a final black passivation with Techseal Black SL28. Scope of delivery: 23, 5 or 1 pcs

Tool for gentle removal of cladding Use this tool set to remove interior trim without damaging the trim panels and fixings. Door handles and dashboard sections can also easily be removed. The set contains four or twelve different levers to cater for all kinds of fixings and trim. Made of tough, durable plastic to avoid surface damage to car body or trim and prevent injuries during removal. All work on interior trim can easily and safely be conducted with this tool set. Also suitable for disassembly of various household appliances - e.g. opening housings (see pictures).The 12pcs set contains tools, that are especially good for the disassembly of radios.

FIXPLUS Strap 35cm long, dark grey or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden  Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching  Secure: guarantees a stable hold even with strong vibration & knocks even after frequent use, tear-resistant, elastic and flexible  Durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant FIXPLUS Strap 35:  in the colours dark grey or orange  35cm long - 2.3cm wide - 22g light  circumference up to 30.5cm  tensile force: 900N / 90kg  can be assembled and thus extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.