Shop by vehicle

Suspension lift kit TREKFINDER for JEEP® Renegade +30 millimetres the lift is approx. +30 millimetressuitable for the Renegade 4WD type BU model ‘TRAILHAWK’.A suitable version for the standard model of the Renegade 4WD Type BU can be purchased here.The standard shock absorbers can still be usedScope of delivery:  4x TREKFINDER coil spring 1x TREKFINDER sticker 1x piece parts certificate PLEASE NOTE: NOT suitable for hybrid vehicles!

Turbocharger Hull Assembly for Defender TD4 Turbocharger hull assembly forDefender (all models with 2,4l TDCI Puma) Turbocharger trunk assembly forDefender (all models with 2.2l TDCI Puma)

Nakatanenga Valuables Case - cubby box raise Nakatanenga valuables case and cubby box raiser for all Land Rover Defender 90/110/130 (all MY), mounted beneath the cubby box / centre console, with hidden lock, optinally with switches, 12 V and USB sockets. Provides additional storage space for all the odds and ends, like sun glasses, mobile phones, purses or other valuables. As it is mounted underneath the cubby box and features a hidden lock, this storage safe is hard to notice and thus gives additional security. Other such cases often only offer space for a few documents, while our safe is large enough to hold items of larger size, cameras, mobile, navigation devices, money, glasses, etc. Usable interior space 43x26x14 cm. In this is the new and improved version of our popular CUSADE the sockets have been replaced by waterproof heavy-duty items. You can optionally have double-sockets (for USB-A and USB-C) to allow for more than one device to be connected simultaneously, or have three 20 A rocker switches pre-installed to operate in-car electronic devices such as air supply, fride, LED worklights etc. The different front panels are available individually, so that you can change your configuraiton at a later time. When using the suitable twist-lock plugs, the 12 V sockets securely lock the plug in place, which is an additional advantage e.g. in severe off-road conditions. In vehicles with interior bulkhead the case can only be opened a few centimetres as the cubby box will then foul the bulkhead. This case can still be used for shallow items. Comes with two keys (which can be reordered).

Storage compartment footwell for Land Rover Defender TD4/TD5 Every Landy draws attention, for sure, but often enough it’s the unwanted kind from thieves and car burglars. That’s where this nifty and inconspicuous modification comes in for Defender models Td5 and Td4 (90/110/130) – whether camping conversion, expedition vehicle or your regular standard spec Landy. Our hidden underfloor locker for the front footwell is integrated in the floor panel and thereby creates a lot more security for your valuables. Secured by a lock, dust- and watertight and in most cases hidden by floor mats, the underfloor boxes are the ideal storage space for all those extremely important small things: documents, passports, wallets, expensive electronics, gadgets, tools, medication etc. Sporting a volume of ca. 7 liters, this roughly square storage box will hold an astounding amount of your most valuable items. Since the boxes are mounted underneath the footwell floor, we make them from extremely robust, powder-coated stainless steel. Installing the assembly kits for Td5/Td4 in the right or left front seat footwells is really simple. Other areas in the vehicle body are also suitable for mounting the locker, the cargo hold for example. In these cases, you can order the box also without the panel. If you own non-standard Defenders or older models, where the Td5/Td4 panels won’t fit, you should also choose the “locker only” option. The same applies if you simply want to make the cuts yourself in the existing floor panels. Important during installation: the flattened edge of the box must always face the centre of the vehicle during installation! Please note, if a tank or other additional attachments are mounted below the bottom plate, it is not possible to mount the storage box. Material: Box: Stainless steelFootwell panel: Aluminum

Running board round tube for Land Rover Defender 90/110 Tube: Black powder-coated, with chequer plate pads (natural) for safe tread, even with dirty tubes, supplied in pairs. Please select the model you require. Important note: These running boards are not compatible with the original splash guards (front). You can find the matching Dirt trap plate and mud flaps here.

EBC Turbo Groove Disc These EBC Turbo Groove performance brake disks offer outstanding performance favoured by sports drivers while maintaining road capability for everyday use. EBCs Turbo Groove Brake Discs feature a slot design that runs to the outside edge of the disc allowing the dust, debris, gasses and carbon deposits to be spun off from the braking disc surface, further improving braking under severe off-road driving conditions. Instead of being through drilled, blind drilled dimples prevent cracking and help to break down surface gasses of the brake disc/rotor to further improve braking under heavy load. Gold-coated for optimal corrosion resistance. Made in Europe and machined using a high quality alloy that is capable of running up to incredibly high temperatures. These discs are intended for Road, light race, rally and track day use.  Features wide aperture grooves to prevent dirt from building up so the disc is kept clean minimising wear zinc anti-corrosion coated castings stop them rusting, keeping them looking good behind your wheels dimple hole construction prevent cracking and warping increasing the life of the discs For many verhicles these disks can be supplied with German vehicle operating permit/licence - TÜV approval is not required. Please choose your vehicle:

Seat covers for Suzuki Jimny II (model: GJ, from year of manufacture: 2018 / model: HJ) Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. available in these variants:  Driver's side Passenger side Rear seat  Driver and passenger side Driver's side, front passenger's side and rear seat Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) under documents. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Snorkel for Land Rover New Defender, from model year 2020 The snorkel not only enables safe driving through deeper water with reduced risk to the engine, it also brings advantages in dusty environments: The raised air intake at roof height ensures cleaner, less dusty air, and the air filter needs to be replaced or cleaned less frequently.

EXCLUSIVELY only available at Naktanenga! MOMO steering wheel model “Trek” with TREKFINDER steering wheel hub MOMO steering wheel "Trek" with TREKFINDER steering wheel hub - EXCLUSIVE! Only Available here! The Hub ships with a TÜV parts-certificate and is street legal in combination with the MOMO steering wheel! To install the MOMO steering wheel you can not get around a steering wheel hub. The MOMO "TREK" is a beautifully designed steering wheel with 3 spokes and an air leather, suede, and leather finish. Its design follows that of popular motorsport steering wheels. MOMO steering wheels set themselves apart with phenomenal craftsmanship. During development, the looks and grippy feel of the steering wheel were the main focus. All hardware is included. The optional Land Rover Logo can be purchased here.   Details: Model: TREK Finish: genuine leather, black; anodized spoke Color of stitching: black Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required.  In comparison with the RAID performance steering wheel:         Attention: A steering wheel with a leather finish is especially delicate due to the constant gripping. Leather is a natural product and over time sings of wear can appear, eg. rubbed off areas, brittle areas, or a change in color. Since the material has open pores especially sweat and dirt from the hands tend to damage the steering wheel. Mainly, sweat is highly aggressive in contact with genuine leather. To protect the wheel and ensure a long life, we suggest you either wear gloves or tend to the leather every three months. The necessary supplies you can find in specialized stores.

Aluminium spray widener for Defender 90/110 66mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval.  All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70 per cent lighter than ordinare spacers made from steel. Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 66 mm per axle (2x 33 mm) material: aluminium alloy colour: black alignment: center alignment Vehicles:  Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate. Please note: The wheel spacer is not suitable for Dotz Dakar rims, as this rim has a built-in wheel spacer of 25 mm.

EBC Turbo Groove Disc These EBC Turbo Groove performance brake disks offer outstanding performance favoured by sports drivers while maintaining road capability for everyday use. EBCs Turbo Groove Brake Discs feature a slot design that runs to the outside edge of the disc allowing the dust, debris, gasses and carbon deposits to be spun off from the braking disc surface, further improving braking under severe off-road driving conditions. Instead of being through drilled, blind drilled dimples prevent cracking and help to break down surface gasses of the brake disc/rotor to further improve braking under heavy load. Gold-coated for optimal corrosion resistance. Made in Europe and machined using a high quality alloy that is capable of running up to incredibly high temperatures. These discs are intended for Road, light race, rally and track day use.  Features wide aperture grooves to prevent dirt from building up so the disc is kept clean minimising wear zinc anti-corrosion coated castings stop them rusting, keeping them looking good behind your wheels dimple hole construction prevent cracking and warping increasing the life of the discs For many verhicles these disks can be supplied with German vehicle operating permit/licence - TÜV approval is not required. Please choose your vehicle:

Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130 Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting.Delivery incl. bolt and retaining clip. Surface: optionally black primed or hot-dip galvanised. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term. Surface Treatment Notice This component is supplied exclusively with a primer coating. This primer is intended solely for temporary corrosion protection during storage and transport and is not suitable as a permanent surface finish for exterior automotive use. It is essential to sand the component, apply a suitable primer, and then either paint or powder-coat it in order to ensure rust resistance. Optionally, we recommend treating the inside of the component with a suitable corrosion protection grease. Only this will reliably prevent corrosion from forming again inside the component over the long term.    

Clear visibility for your Jeep Wrangler JK For easy installation in the original bumper or compatible bumpers for the Jeep Wranlger JK, the new LED multifunction light from Nolden is suitable. It combines a daytime running light (DRL), fog lights and a position light / parking light in a compact 90mm housing. The mounting frame allows the installation in the Wrangler / Wrangler Unlimited (from model year 2007), the fog light is adjustable. The required control unit is integrated. Technical data: Dimensions: 90x63 mmLED type: 1x Osram Ostar, 1x Osram OslonVoltage: 12 V / 24 VApproval: ECE and SAEConnector (fog light): H8 / H11Connector (daytime running light and parking light): AMP SupersealColours: Chrome / Black The price refers to a set with two headlights. The headlights are available in black and chrome, please select the desired variant below. 

Turbocharger trunk assembly for Defender & Discovery II (2.5l TD5) This high-quality turbocharger trunk assembly is suitable for all Land Rover Defender and Discovery II models with 2.5 litre TD5 diesel engines. Ideal as a replacement for defective or worn units - for optimum performance and longevity of your vehicle.

Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 300TDI) Turbocharger body assembly forDefender & Discovery I & Range Rover Classic (all models with 2.5l 200TDI)

Door seal sets for Land Rover Defender - Perfect fit & robust for any terrain Whether replacing classic standard equipment or retrofitting for better sealing: Our selection of door seal sets for the Land Rover Defender offers the right solution for almost every model and year of manufacture. The high-quality seals (original or replica) ensure noticeably less wind noise, reliable protection against water and dust - particularly important for off-road driving or daily use in all weather conditions. Choose from different sets for driver and passenger doors, rear doors and side doors - all custom-fit, durable and easy to fit. More comfort. Less noise. Better sealing. Make your Defender fit for every adventure - with the right door seals from our range.    

Nakatanenga CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector  Material:  Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights

Lightweight aluminium wheel spacers (46 mm) - set for front & rear axle, with parts certificate 46 mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. Defender 130 rear max load weight needs to be lowered to 2 tonnes. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70% lighter than ordinare spacers made from steel.Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 46 mm per axle (2x 23 mm) material: aluminium alloy colour: black alignment: center alignment Vehicles:  Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic Please note: With the rear axle unloaded, the wheel spacer can also be used for the Land Rover Defender 130.  These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate.

Adjustable mirror arms Thanks to their unique fastening mechanism, nothing flutters, even at high speeds. The real highlight, however, is the mirror's folding function. Simply open the Torx screw, fold the mirror down by 90° and the field of vision to the rear is extended many times over.Especially for vehicles with a living cabin or when driving with a trailer, these mirror arms offer real added value! There is no need to attach mirror extensions.Product features: unique mirror flip mechanism precisely manufactured from high-strength aluminium corrosion & UV resistant coating also fit the original Land Rover Defender hinges set includes two pieces Length approx. 19cm Note: When using these mirror arms, the use of a mirror heater is not necessary.

Windscreen Defender, tinted and heated - for all Defender up to year of manufacture 2016 You can find matching sealing rubber for the windscreen HERE in the shop. Please note: This item can only be collected locally in Berg bei Neumarkt (postcode: 92348) - shipping is not possible! Please arrange an appointment for collection in advance. Please feel free to contact us by e-mail or telephone.info@nakatanenga.deTel. : ☎ +49 9181 466 644

MOMO steering wheel Model "Tuner" with TREKFINDER steering wheel hub - only available at Nakatanenga! The TREKFINDER steering wheel hub has a TÜV parts certificate and, in combination with MOMO steering wheels, is therefore uniquely suitable for use on German roads! You will need a steering wheel hub to install the MOMO steering wheel. The MOMO TUNER steering wheel is an elegant, classic 3-spoke steering wheel. The black spokes and red stitching round off the look of this small, easy-grip steering wheel! MOMO steering wheels are characterised by their extremely high-quality workmanship. During development, particular attention was paid to a sporty appearance and a high level of grip. Screws for attaching the steering wheel are included in the scope of delivery. The leather cover with Land Rover emblem can be purchased OPTIONALLY here.   Technical data: Model: TUNER Surface material: Genuine leather, black; black spokes Stitching colour: red Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate included. A TÜV inspection is required. You will need a steering wheel hub to install the steering wheel. If you already have a MOMO sports steering wheel, you can continue to use its hub. Defender up to model year 2014 and serial number up to EA999999 KK807 for vehicles with 36 splines/teeth and 17 mm diameter  KK810 for vehicles with 48 splines/teeth and 19 mm diameter Defender from model year 2014 and serial number from FA000001 KK811 for vehicles with 48 splines/teeth and 19 mm diameter If you have a Defender up to model year 2014 and serial number up to EA999999, you must first determine the number of splines/teeth and the diameter on the steering column. Please note: Leather steering wheels are subject to particular wear and tear as they are constantly being touched. Leather is a natural product  that shows signs of wear over time, such as abrasion, brittleness or discolouration. As the material is open-pored, hand perspiration and skin oils gradually soak into the leather. However, hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or treat it regularly (approx. every 3 months). Good cleaning and care products are available from specialist retailers.

Lifting spring kit TREKFINDER for JEEP® Renegade +30 millimetres     the ride height is approx. +30 millimetres     suitable for the standard model of the Renegade 4WD type BU.     A suitable version for the "TRAILHAWK" model can be purchased here.     the standard shock absorbers can still be used Scope of delivery:     4x piece TREKFINDER coil spring     1x piece TREKFINDER sticker     1x piece parts certificate

High-quality 7x16" ET11 aluminum rim Aluminium Alloy rim ZU 7x16" ET11 offset, only 10.4 kg load weight 1,400 kg - comes with TUV approval. Fits all Defender 90/110/130, Discovery 1, Range Rover Classic. Standrad LR wheel nuts for alloy rims are needed! Rim size: 7x16" ET 24 Land Rover Defender rims (except the original rims) must be stud-centered. Standard wheel nuts for LR alloy rims are required! Weight of the 16-inch rim: 10.7 kg Please note: The rims require individual approval for the Defender 130. Please contact us by telephone or email for more information. We recommend balancing the rims for the Land Rover Defender using bolt or centre circle centring.

TREKFINDER Wheel Spacer Mercedes G Wheel spacer for Mercedes G by TREKFINDER with conversion from screws to bolt system with 60 mm wheel spacer per axle made of high-strength, hard anodised aluminium.Scope of delivery for 2 axles. Details:    conversion from wheel bolt to wheel nut    60 mm per axle    made of high-strength aluminium alloy    DRM system + LK 130/5 + MZ84 + M14 x 1.5    price for two axles    the bolts for fixing the wheel to the axle are included in delivery    wheel nuts with ball collars are included    incl. parts certificate    easy plug&play mounting

Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until 2016.    Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request.    Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated    Integrated recovery eyes (22.5 mm diameter)    The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material. This underride protection can be fitted to both right-hand drive and left-hand drive vehicles.   

Powerful and elegant: Dezent TV black alloy wheel for New Defender and SUV With load capacities of up to 1050 kg per wheel, the Dezent TV black rim is ideal for off-roaders, vans and SUVs.The all-rounder has a particularly balanced design structure and supports the elegant appearance of stately vehicles with its powerful double spokes. The hard-wearing 3-layer coating (SRC) protects in winter conditions as well as in everyday or work use.    Diameter : 20    Width : 9    OFFSET : 43    Bolt circle / PCD : 5/120    Finish : Glossy black (3-coat paint)    Weight : 16,5kg    incl. parts certificateAlso available as complete wheel sets with different tyres: Radar Renegade or BF Goodrich All Terrain KO2

MOMO steering wheel TUNER with silver spoke, with TREKFINDER steering wheel hub MOMO steering wheel model "Tuner" with TREKFINDER steering wheel hub - EXCLUSIVE only available at Naktanenga!The TREKFINDER steering wheel hub has a TÜV parts certificate and is therefore in combination with the MOMO steering wheels uniquely suitable for German road traffic!You need a steering wheel hub to mount the MOMO steering wheel.The MOMO steering wheel TUNER is a beautifully designed, classic 3-spoke steering wheel. The silver spoke visually rounds off the small and easy-grip steering wheel!MOMO steering wheels are characterised by an extremely high-quality finish. During development, special attention was paid to a sporty appearance and a high level of grip.Screws for fastening the steering wheel are included in the scope of delivery.The leather cover with Land Rover emblem can be purchased OPTIONALLY here.Technical data:Model: TUNERSurface material: genuine leather, black ; silver spokeStitching colour: blackDiameter: 35 cmCertificates: ABE steering wheel and hub with TÜV parts certificate enclosed. A TÜV inspection is required. You need a steering wheel hub to mount the steering wheel. If you already own a MOMO sports steering wheel, you can continue to use its hub.Defender up to model year 2014 and serial number up to EA999999KK807 for vehicles with 36 spline/teeth and 17 mm diameter KK810 for vehicles with 48 spline/teeth and 19 mm diameterDefender from model year 2014 and serial number FA000001 onwardsKK811 for vehicle with 48 splines/teeth and 19 mm diameterIf you have a Defender up to model year 2014 and serial number up to EA999999, it is essential that you determine the number of splines/teeth and the diameter on the steering column in advance.Please note:Steering wheels made of leather are particularly hard-wearing as they are constantly touched. Leather is a natural product that shows signs of wear over time, e.g. abrasion, the material becomes brittle or the colour changes. Since the material is open-pored, hand perspiration and skin oils are gradually absorbed into the leather. But hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or care for it regularly (approx. every 3 months).You can find good cleaning and care products in specialist shops.

For the highest demands MOMO steering wheel model ‘Competition’ with TREKFINDER steering wheel hub – EXCLUSIVELY available from Naktanenga! The TREKFINDER steering wheel hub has a TÜV parts certificate and, in combination with MOMO steering wheels, is therefore uniquely suitable for use on German roads!   You will need a steering wheel hub to install the MOMO steering wheel.   The MOMO COMPETITION steering wheel is an elegant, classic 3-spoke steering wheel with a black horn ring. MOMO steering wheels are characterised by their extremely high-quality workmanship. During development, particular attention was paid to creating a sporty look and a high level of grip. Screws for attaching the steering wheel are included in the scope of delivery.   The leather cover with Land Rover emblem can be purchased OPTIONALLY here.   Technical data: Model: COMPETITION Surface material: Genuine leather, black Seam colour: Black Diameter: 35 cm Certificate: ABE steering wheel and hub with TÜV parts certificate included. A TÜV inspection is required.    Lenkrad Modell "Competition" mit TREKFINDER Lenkradnabe - EXKLUSIV nur bei Naktanenga erhältlich!     Defender up to model year 2014 and serial number up to EA999999 KK807 for vehicles with 36 splines/teeth and 17 mm diameter  KK810 for vehicles with 48 splines/teeth and 19 mm diameter   Defender from model year 2014 and serial number from FA000001 KK811 for vehicles with 48 splines/teeth and 19 mm diameter   If you have a Defender up to model year 2014 and serial number up to EA999999, you must first determine the number of splines/teeth and the diameter on the steering column.   Please note: Leather steering wheels are subject to particular wear and tear as they are constantly being touched. Leather is a natural product that shows signs of wear over time, such as abrasion, brittleness or discolouration. As the material is open-pored, hand perspiration and skin oils gradually soak into the leather. However, hand perspiration and skin oils are particularly aggressive on leather. To protect the steering wheel, you can either wear gloves or maintain it regularly (approx. every 3 months). Good cleaning and care products are available from specialist retailers.

Your G Needs Access – Safe and Stylish with the NakatanengaCargoBear Rear Ladder! You love your Mercedes G and use it for what it's made for: adventure! But what good is the best roof rack if the equipment on it is hard to reach? Especially with an imposing vehicle like the G-Class, safe access is worth its weight in gold. Our CargoBear rear ladder for the right-hand side of the vehicle is the solution – robust, a perfect fit, and elegant. Thoughtfully Designed Down to the Last Detail for Your Comfort and Safety: This rear ladder is more than just a simple step. Made from lightweight yet extremely stable aluminum, it makes accessing your roof rack child's play. Ergonomic and Safe: With its four wide rungs and clever angling that follows the contour of your G's rear, you can climb up and down comfortably and, above all, safely. The ladder is wider at the bottom than at the top, which makes descending even easier. Robust and Chic: The high-quality powder coating in a silk-matt black not only looks great but is also extremely resistant to the rigors of everyday off-road life. Perfect Fit for Your G: Our rear ladder is suitable for a variety of G-Class models: W460 (model year 1979-1992) W461 (from model year 1992) W462 (ELBO variant) W463 (model year 1990-2018) Flexible Mounting: The ladder is simply hooked into the rain gutter at the top and screwed in. For the lower attachment, you have a choice: Standard: Secure attachment with strong 3M double-sided adhesive tape. Optional: For an even more robust connection, you can drill two holes and screw the ladder on with the supplied blind rivet nuts. G Professional: Here you can mount the ladder directly to existing screw points on your vehicle. Make your Mercedes G even more functional and safer. With the CargoBear rear ladder, you can reach your equipment on the roof in no time and give your vehicle a professional look at the same time. Get this indispensable accessory now!

Roof console Land Rover Defender - transverse Roof console for Land Rover Defender 90/110/130, is mounted crosswise to the direction of travel, provides a DIN slot and storage space. The Nakatanenga switch bundle with 7 on/off switches is suitable for mounting in the DIN slot.Not suitable for vehicles with sunroof.Available in grey and black.

Aluminium 16 inch rim Discovery II / Range Rover P38 ZU 8x16" ET38 Weight only 10.4 kg load capacity 1,400 kg - incl. TÜV certificate. Rims size: 8x16" ET 38   16-inch aluminium rim Discovery II / Range Rover P38   We recommend balancing the rims for the Land Rover Defender using bolt or centre 

Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.