CargoBear 2.0 system roof rack for Land Rover New Defender 110 from 2020 onwards
Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating
Prices incl. VAT;
SPECIAL POST 5-piece complete wheel set, BF Goodrich All Terrain T/A KO2 - 265/65R18 on Borbet CW7 black matt
Robust and powerful: BF Goodrich KO2 on Borbet CW7 – the perfect complete wheel set for your INEOS Grenadier BF Goodrich ALL Terrain T/A KO2 265/65 R18 117R: The BFGoodrich All Terrain T/A KO2 265/65 R18 117R guarantees driving pleasure even off the beaten track. It is very stable and has good road grip. It also copes well in not too difficult terrain with some mud and loose ground. For extreme terrain and little road use, however, a MUS tire is recommended. In the AT area, BFGoodrich is a very good choice. A SPECIAL TIRES compound that is resistant to cuts and chipping on the sidewalls to withstand sharp rocks. Designed to resist chipping and cracking that can be caused by sharp rocks and obstacles in the terrain. IMPRINTED CLAMPS on the sides for more grip and better sidewall protection. The large crampons on the sidewall are synonymous with bite, especially when the tire is rolling at low pressure. A greater thickness of rubber on the sidewall protects the tire from off-road hazards. REINFORCED CABLES for less sensitive sidewalls. A weak sidewall can spoil off-road activities very quickly. Oversized sidewall cables provide the carcass with the necessary protection for tough off-road use. Performance 50% off-road - 50% road Tire width 265 Ratio of sidewall height to tire width in percent 65 Rim diameter: 18" Load index: 117 Speed index: R 3PMSF Alpine symbol (so-called snowflake): yes M+S marking: yes Weight: 23.06 per tire Tire type: All-season Tire construction: Radial Noise emission: 74db Noise class (from 1-quiet to 3-noisy): 2 Wet grip (grip on wet roads): B Fuel efficiency (A to G): F The tires are already mounted on the rims. The white lettering is mounted on the outside! BORBET CW7 18 inch alloy wheel The BORBET CW7 in the “Commercial Wheels” category is a new wheel that not only impresses in terms of design, but also with high wheel loads of up to 1,400 kg. The CW7 stands for a new, striking look that is not just defined by the number of spokes, but is perfect for the real movers and shakers among vehicles. From vans to off-roaders and motorhomes. Manufacturer: Borbet Brand: CW7 Size/offset: 7.5x18", ET 47 Color: matt black Suitability: for Ineos Grenadier Approval: for 255/65R18 255/70R18 265/65R18 A01) K02) Scope of delivery: rim, incl. matching wheel nuts High wheel load Winter-proof Scope of delivery: rim, incl. matching wheel nuts The price refers to 5 complete wheels incl. fitting and balancing. This article is bulky goods.
Prices incl. VAT;
Roof Lodge Evolution 2 - Roof Tent Extended
Ready-to-go roof tent: Evolution 2 Basic incl. accessories You are gently awakened by the sun's rays coming in through the rainproof skylight. You slept well, thanks to the comfortable mattress and the 3D mattress pad underneath. You look around - there is enough space, no mosquitoes or other bugs buzzing around. You open the entrance and get your shoes out of the net attached to the floor of the tent to climb down the ladder. This is your adventure, this is where you want to be! For how long? - That's up to you. Your vehicle will take you anywhere and with the Roof Lodge Evolution 2 rooftop tent you have all the freedom to stay or travel on! Your trip, your experiences, your freedom - no one can take that away from you! For shipping reasons, the stated shipping weight differs from the actual weight. You are not sure whether a roof tent can be mounted on your vehicle? We are happy to support and advise you! So far we have found the perfect solution for almost every vehicle.Just contact us at: ☎ +49 9181 / 466 644 or write us. Roof Lodge Evolution 2 - 140 / 165 Extended The equipment at a glance Tent skin: 320 g/sqm polycotton, PU-coated; the darker fabric of the tent skin allows a restful sleep even in the morning hoursSun sail: 280 gsm polycotton, metal-coated; due to the comparatively heavy quality, significantly less fluttering noise2 roof windows with rain and mosquito protectionOutward curved poles for better water drainageGround tent made of 280 g/sqm polycotton, metal coated - 165: adaptable to a tent mounting height of approx. 170 cm to 210 cm- floor area approx. 180 cm x 200 cm- 140: tent mounting height of approx. 200cm- floor area approx. 160 cm x 200 cm- floor pan made of PVC fabric- Stable protective cover made of PVC fabric (similar to truck tarpaulin)- 4 side walls; window and entrance door with close-meshed mosquito net Thermoplastic honeycomb floor; German brand productone-piece mattress (60 mm thick); available in two hardnesses; manufacturer: Saar-Schaum, Germany- standard mattress: recommended for persons up to 100 kg or those who like to lie softly- hard mattress: recommended for persons over 100 kg or those who like to lie hard3D mattress base (10 mm thick) for restful sleep; the base prevents condensation.fine-mesh mosquito protection on all windows and the entrance Additionally included with the tent: Aluminum ladder for a mounting height of the tent up to 2 meters incl. Nakatanenga compensating feet; adaptable to the vehicle height (and extendable with an optionally available ladder extension)Stable protective cover made of PVC fabric (similar to truck tarpaulin)LED tent lighting2x Nakatanenga travel pillows6x spring steel polesMounting material and required toolsThe supplied mounting material is used to mount the tent on standard crossbars with a width of up to 120 mm. If you have a different mounting situation, please contact us - we will be happy to provide you with alternative mounting options.pre-drilled mounting rails, which can be shortened according to the mounting situation (for details please refer to the enclosed detailed mounting and maintenance instructions)Roof tent net for shoes and small items (mounted on the front underside of the honeycomb floor). Features: Lying surface: 140 cm x 240 cm (140) / 165 cm x 240 cm (165) ; Height: approx. 120 cmPacking size: 143x124x40 cm (140) / 168x124x40 cm (165)The height of the folded tent is about 45 cm. This measurement is composed of the height of the mounting rails, the height of the folded tent and the height of the ladder lying on the tent. The ladder can be dismantled if necessary (keyword ferry).Can be mounted on off-road vehicles and also passenger carsMaterial: 65% polyester / 35% cotton (tent skin, sun sail & ground tent)Material: 100% cotton (mattress cover) And by the way: Since we naturally apply only the highest standards of material and workmanship to our own Nakatanenga roof tents, they have been manufactured only in-house for many years. As a result, absolutely every step in the process goes through additional quality control. Every tent that is marked with green delivery status in the store can also be picked up from us at short notice by appointment. We will be happy to advise you: ☎ +49 9181 466 644
Prices incl. VAT;
Roof Lodge Evolution 2 - Roof Tent Basic with and without annex
Ready-to-go roof tent: Evolution 2 Basic incl. accessories You're woken up by the rays of the morning sun shining through the rain-proof roof-top window. You've slept well thanks to the comfortable mattress and the 3D mesh underneath. You're having a look around - there is plenty of space, no mosquitos or other insect that are flying around. You open the entrance and get your shoes out of the separate storage net to begin your descent. That's your adventure. That's exactly where you want to be! For how long? That's up to you. Your vehicle gets you everywhere and the Nakatanenga Roof Lodge Evolution roof tent gives you all the freedom to stay or to travel onwards! Roof Lodge Evolution 140 Basic Features tent outer fabric: 320 g/sqm Polycotton, PU coated; the darker fabric allows for long sleep through the morning hours awning: 190T nylon fabric, nomad, PU coated; the relatively heavy weight minimizes fluttering noise 2 roof windows with rain and mosquito protection ground tent: - adjustable for tent mounting heights from about 170 cm to 210 cm- base area: 140 cm x 120 cm- floor pan PVC fabric- durable cover made of PVC fabric (similar to lorry canvas covers)- 4 side skirts; window and entrance with close-mesh fly sheeting- the lighter fabric allows outside light to enter the awning thermoplast honeycomb floor; made in Germany once-piece matress (60mm thickness); available in two degrees of hardness, manufacturer: Saar-Schaum, Germany separate 3D base mesh (10mm thickness) for relaxing sleep; the mat prevents condensation close mesh mosquito fly sheeting on all windows and entry Additionally supplied with: aluminium ladder for a tent mounting height up to 2 metres, adjustable to vehicle height (optional extension available) hard-wearing protective cover made of PVC fabric (similar to lorry canvas covers) 2x LED interior light 2 Nakatanenga travel cushions 8 flexible steel poles fitting material and necessary toolsThe supplied fitting material allows fitting to standard roof bars with a width of up to 45mm. Should you plan to fit differently please contact us in advance - we can help you with alternative fitting scenarios. pre-drilled mounting rails, to be cut to length according to your requirements (instructions in the supplied fitting instructions) Size and Weight sleeping size: 140 cm x 240 cm ; height approx. 120 cm pack size: 147x124x40 cmThe height of the folded tent is about 45 cm, being the sum of the mounting rails, height of the folded tend and the height of the ladder that rests on top of the folded tent. The ladder can be detached from the tent (e.g. when overall height is important like on ferries, etc. weight of tent: 45 kg (incl. protective cover, ladder, mounting rails) can be fitted to vehicles (also passenger cars) with a mounting height up to 2.10 m Information on the subject of roof loads can be found in the manuel / data sheet tab. We will be happy to advise you: ☎ +49 9181 466 644
Prices incl. VAT;
Set of 4 AEZ Panama high gloss alloy wheels, 8.5x20" ET38 5x120
Set of 4 AEZ Panama aluminium rims for the Land Rover New Defender The AEZ Panama combines a striking cross-spoke design with impressive stability, making it the ideal choice for demanding off-road adventures as well as for a stylish appearance on the road. With a load capacity of up to 1,025 kg, this rim is perfectly designed to meet the high demands of modern SUVs – especially the Land Rover New Defender. Technical details: Size: 8.5x20" Offset (ET): 38 mm Colours: silver or black Bolt circle: 5x120 Load capacity: up to 1,025 kg The AEZ Panama impresses with its high-quality workmanship, maximum robustness and a design that perfectly underlines the powerful character of the New Defender. Ideal for anyone who wants to give their vehicle a high-quality, elegant and at the same time durable upgrade.
Prices incl. VAT;
SPECIAL ITEM: AUTOTERM (Planar) 2D24 parking heater, 24 volts with Simple Control control unit
Reliable AUTOTERM 2D24 24V parking heater incl. Simple Control control unit The AUTOTERM (Planar) 2D parking heater impresses with its compact design and 1.8 kW heating output, making it ideal for installation in small cars, vans, off-road vehicles, motorhomes, construction machinery or boats – even in cramped or difficult installation situations. In the off-road and 4x4 sector, it is perfectly matched to models such as the Land Rover Defender, Mercedes G or Jeep Wrangler JK. The extensive range of installation accessories enables quick and easy installation. Thanks to ECE approval, the parking heater can be installed throughout Europe without registration. The hole pattern also corresponds to the common systems from Eberspächer Airtronic and Webasto AirTop 2000, so that replacement is possible without any problems – without additional drilling in the bodywork. Like all AUTOTERM parking heaters, this model also scores points for its high durability, reliability and economical fuel consumption. In addition, the heater offers a switchable ventilation function for pure recirculation mode. Comes with: - 12 V or 24 V heater- Optionally analogue PU-5 control panel with rotary control or digital Comfort Control control panel with timer- Thomas Magnet P327" dosing pump- Exhaust silencer- Dosing pump rubber holder- Dosing pump wiring harness- Heater wiring harness- Intake air hose with integrated silencer- Heat protection hose- Exhaust pipe end piece + clamp- Tank intake pipe- 5.5 m fuel line- 300 mm fuel line connector- 1 m corrugated metal exhaust pipe- Fastening material (screws, nuts, clamps, heat-shrink tubing, cable ties)- Operating instructions Technical details: · fuel: diesel· heat output: max. 1.8 kw, min. 0.8 kw· air volume: max. 75 m³/h, min. 34 m³/h· fuel consumption: max. 0.24 l/h, min. 0.1 l/h· power drain: max. 29 W, min. 10 W· manual start/stop PLEASE NOTE: Price advantage: We are offering this item at a reduced price because it was put into storage for a project but was ultimately not installed. It is in its unopened original packaging and is completely unused.
Prices incl. VAT;
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15", offset: -5
Alloy wheel for Suzuki Jimny 2 GJ/HJ High Peak J-02, 6x15" offset: -5 After the great response to the J-01 wheel, we wanted to do something different with the second original design. We present you the HIGH PEAK J-02 15-inch alloy wheel, front. While the J-01 offers a classic design with a deep lip, the J-02 features a concave seven-spoke design reminiscent of off-road motorsport. Specifically designed for the Suzuki Jimny JB74 (2018+, designated as 'GJ' & 'HJ' in the EU). TÜV type approved and strength tested. Also compatible with JB43 (1998-2018) models. Made in Italy. Guaranteed European quality Bolt-on mounting with standard or raised chassis. No additional modifications required (depending on tyre size). Rim size : 6x15"OFFSET : -5Bore / PCD : 5x139.7Finish : anthracite or vintage whiteWeight : 9.2kgVehicle : Suzuki Jimny II GJ/HJ If you need a complete wheel set, please contact us by e-mail or phone.info@nakatanenga.de☎ +49 9181 466 644
Prices incl. VAT;
Alloy rim Diewe Amaro 9x20" ET37 5x120 for New Defender LE
The striking design looks light and elegant on heavy vehicles. 20-inch chrome alloy wheel for New Defender Data: Wheel size: 9x20" ET: 37 Bolt pattern: 5x120 Colour: chrome, black Special features: suitable for winter use
Prices incl. VAT;
Seat cover for Suzuki Jimny 1
Seat covers for Suzuki Jimny I Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. Available for: Suzuki Jimny I Set consists of: Driver's side, passenger's side Colour: Coyote, Black, Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
OPTIMATE mobile solar battery charging system, incl. traveling kit
OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current: 3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high. Made in South Africa
Prices incl. VAT;
Bundle: Nolden LED work lights / reversing lights with protective grille
Powerful Duo for Clear Vision: Work Light + Protective Grill Bundle This bundle consists of 1 x NOLDEN LED work light / reversing light (optionally with 500 or 1,000 lumens)1 x protective grille for Nolden work lights / reversing lights
Prices incl. VAT;
Plastic water can with spout tap 40L
High quality plastic water cans with 40 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 40 liter plastic water can: Dimensions: 460x335x335 mmPolyethylene (BPA-free / food grade)Scope of supply: 40 liter water canisters made of plastic and hose with spigot You can find a replacement twist cap here. The cap has a diameter of ø 60 mm since May 2022Previously the diameter was ø 50 mm
Prices incl. VAT;
Nolden LED Worklight / Reverse Light AR116
NCC LED Reverse light A116 Extremely flat and compact LED working / reverse light with a depth of only 30 mm. Thanks to the space-saving design and the low cable entry, the headlamp offers the right mounting solution for almost any situation. The illumination is tilted 45° downwards, which means that the headlamp provides perfect ambient lighting even in the case of vertical alignment. In addition to standing and suspended mounting, the headlamp can optionally also be mounted on the backside with retaining brackets or directly on vertical surfaces as ambient lighting and all this with only one headlamp design! The variant AR116 / 500 offers 550 +/- 50 lumen with 12 LEDs with only 8 W power consumption.The variant AR116 / 1000 offers 1.000 +/- 90 lumens with 24 LEDs with only 14 W power consumption. Both versions meet the ECE R23 guideline and can therefore also be used legally as a back-up light in road traffic. Due to the need of high-performance reverse lights, working headlamps have regularly been used as reverse lights (especially in the truck sector), although this is NOT allowed. With the NCC LED AR116 work / reverse light, this has come to an end and possibly fines or even lost insurance protection are a thing of the past. Due to the exchangeable logo, customer-specific designs are possible. Technical specifications:Measurements: 117x32 mmLEDs & Type: 12 or 24 pieces AR116 / 500; AR116 / 1000; creePower: 12/24 VPower at 12 V: AR116 / 500 with 8 W and AR116 / 1000 with 14 WMounting points: 4x M6 and 1x M10Weight: 350 gCertification: ECE R10, ECE R23Material housing: ABSMaterial light disc: PCTemperature range: -40 ° C - + 80 ° CPlug: English DT15-2P or open cable ends Other features:45° downward illumination for optimum ambient lighting only 30 mm depthUniversal 12 / 24V (Multivoltage 9 V - 33 V)durable LED and electronics with 30,000 hours of lifeimpact-resistant plastic housing, with optimum corrosion resistanceimpact resistant and hardened polycarbonate front screenwater- and dust-tight according to IP 68 & IP6K9KRadio and radio interference suppression according to ECE R10 and CISPR 25 Level 5Temperature monitoring and protection against overheating2 m connection cable for free plug assemblyYou can find the perfect mounting for the headlight here. Please note: the protective grilles shown in the pictures are not included in the scope of delivery.
Prices incl. VAT;
OPTIMATE PRO-1 DUO Battery Charger TM650
PRO series: 12V 10 A diagnostic battery charger tester & power supply unit. Suitable for new or used 12 V lead acid (3-50 Ah) and 12.8 V/13.2 V LiFePO4 (2-20 Ah) batteries. 3 choices: Select a charging mode for 12 V lead-acid OR 12.8 V LiFePO4 or select the power supply mode for battery support during vehicle diagnostics, tuning or troubleshooting.Automatic quick battery activation: a flashing green test light indicates that the battery is healthy and sufficiently charged.Intelligent recovery mode for deeply discharged batteries; a bad battery is quickly identified, a good battery is charged and then retested.Push button activated BMS recovery for LiFePO4 batteries.Test battery indicator for GOOD (80 to 100 %), OK (60 to 80 %) and BAD (below 60 %).Power supply mode provides constant power for vehicle tuning, diagnostics and troubleshooting. CHARGING CURRENT: 0.4 A to 10 A variable (Ampmatic). CHARGING VOLTAGE: 12 V lead acid: 0.5 V to 22 V. 12.8 V/13.2 V Lithium LFP (LiFePO4): 0.5 V to 14.4 V. Power supply: 11 V to 13.6 V. OPERATION: Selectable USE: Indoor IP40 rating. INPUT: Global (100-240 V 50-60 Hz), high efficiency. STYLE: Case with rubber bumper, with wall bracket or suspension rod. Class 2 AC input socket, with ON/OFF switch, 15 cm/6″ output cable. CABLES INCLUDED: Class II power cord, suitable for the region, O-43 charging cable extension 180 cm/72″ and O-14 fused battery clips. CARRYABLE USE: Hanging hook for vehicle and wall receiver included. WARRANTY: 2 year limited repair/replacement warranty. By the manufacturer!
Prices incl. VAT;
Plastic water can with spout tap 20L or 10L
High quality plastic water cans with 20 liters and 10 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 20 liter plastic water canister: Dimensions: 350x460x170 mmPolyethylene (BPA-free / food grade)Scope of delivery: 20 liter water canisters made of plastic 10 liter plastic water can: Dimensions: 260x370x140 mmPolyethylene (BPA-free / food grade)Scope of supply: 10 liter water canisters made of plastic The canisters are available in grey and coyote-brown. You can find a replacement twist cap here. The cap has a diameter of ø 65 mm since May 2022Previously the diameter was ø 50 mm Please note: Based on various customer feedback, it can be assumed that our 20L canister is not compatible with the GMB holder!
Prices incl. VAT;
Wind deflector ClimAir Land Rover New Defender 90, front
Wind deflector ClimAir Land Rover New Defender TYPE L663, front Off-road vehicles are not designed for aerodynamics and invertebrate air currents, of course. This is rarely noticeable when driving, because you usually don't even get into the corresponding speed ranges. However, there is one aspect where the Defender's rustic box shape very quickly reveals annoying disadvantages and that is the almost rectangular and fairly vertical windows. Especially when driving off-road or in cold and wet conditions, for example when the ventilation in the Landy is weak and the windows mist up, you're glad if you can roll the windows down a little. However, the effect described at the beginning of this article soon becomes apparent. The strong turbulence on the angular windows is not only loud, but also draws even more dust and water into the car. This annoys even the most hardened off-roaders. The perfectly fitting and extremely robust wind deflectors from ClimAir for the New Defender 90 provide an immediate remedy and guarantee improved fresh air supply and a pleasant interior climate in all seasons. The screens made of cast acrylic glass reliably keep out snow and rainwater both when driving and when stationary and ensure that you can avoid any build-up of heat through the window, even when it is very hot in summer. This is particularly good news for children and pets on the road or when traveling. And the improved supply of fresh air is also good news for smokers and their passengers. The wind deflectors are available in transparent, smoke gray and black and are supplied with a general operating permit (ABE). Installation is a matter of minutes with the enclosed instructions. Suitable for New Defender 90!
Prices incl. VAT;
Front extension with arched shape for Evolution awning, light grey
Roof Lodge Evolution Front Extension Arc Shape for Car Awning (Bag Awning). The extension is made from the same high quality material as the Roof Lodge Evolution canopy / awning and provides ideal sun, privacy and wind protection. The extension is simply pulled into the existing keder rail of the awning. The extension has a keder diameter of 6.5 mm and is therefore also suitable for many other awnings. The corners of the extension can be fixed to the ground with the pegs and ropes included in the delivery. The extended length of the extensions is always 200 cm, regardless of the width. Compared to standard awning extensions, this extension has a small curve at the outer end, so that the extension has ideal tension when stretched. This means that it flutters less and withstands stronger winds better. It can be tensioned at an angle or vertically! With an extension that reaches all the way to the ground, you usually feel quite isolated from the surroundings. No wonder, because a completely pulled-down side almost looks like an incomplete awning, but without offering the advantages of an awning. The awning front extensions are available in the following widths: 140, 200, 250 and 270 cm. The length is always 200 cm for all of them Material:280 gsm RipStop polycotton (65% polyester / 35% cotton), PU-coated; water and dirt repellent; significantly less fluttering noise due to the comparatively heavy quality. Attention:The extension cannot be attached at the same time as the awning awning, as both are attached to the same keder rail. Scope of delivery: 1 piece awning extension in the shape of an arch 2 pieces of cords 2 pegs The awning is not included in the scope of delivery! The additional telescopic poles, which can be seen in some pictures, are not included in the scope of delivery of the extension, but are optionally available. Important note: As a subsequent delivery of the materials for this product requires a lot of time, please request the desired item by e-mail if you are interested.
Prices incl. VAT;
Lever lock with lock and key, stainless steel set of 2 pcs
Secure Stainless Steel Toggle Latch in a Practical Set Versatile lever lock made of stainless steel.This closure is ideally suited e.g. for DIY projects, transport boxes and much more. Due to the quick and easy assembly, this closure is the absolute all-rounder. The robust lever lock is equipped with lock and matching key. Available in a set of 2, 5 or 10 pieces Basic information: spring-loaded stainless steel lockable
Prices incl. VAT;
Extension for Evolution Awning / Blind
Extension for Evolution Awning / Blind This extension is made from the same high-quality material like the Nakatanenga Evolution Awning / blind and gives ideal side sun, sight and wind protection. The extension is simply fitted to the existing welt track / c profile of the awning. With a diameter of 6.5 mm the welt fits to a number of awnings on the market. The extension can be secured to the ground with supplied pegs and cords. The full length of the extension is 200 cm. Surface area: 200 x 140/200/250/300 cmmaterial: 280 g/sqm rip-stop Polycotton, PU coated; water and dirt repellent; due to the relatively heavy quality reduced wind noise Attention: The extension can’t be used at the same time with the awning for the blind as both use the same c-profile for attachment. The awning is not included in delivery! Please order it separately here (200 cm, 250 cm, 300 cm) or here (140 cm). If you want to erect the extension as shown in the 4th image, you can order an additional pair of pegs.
Prices incl. VAT;
Bundle: Dutch Oven Camping Set incl. cast iron pot with book
Dutch Oven camping set, including cookery book The Dutch Oven, often referred to simply as a pot (sic), is available here together with a sturdy tripod, a pot stand, a lid lifter and a book.Although the pot itself is available in three sizes, we only offer the two more popular sizes as a set. The pots are particularly suitable for induction hobs, but also for all other types (ceramic, open fire, etc.). Please select the desired size.Here you will receive a practical starter pack with our Dutch Oven Set together with the book ‘The Little Dutch Oven Book’. Please select the desired size.Scope of delivery: 1 x Dutch Oven with lid (either 4.5 or 8.5 quart) 1 x tripod 1 x lid lifter 1 x pot stand 1 x book ‘The little Dutch Oven book’ Further information: Our Dutch Ovens can be used over an open fire, on the barbecue, on the hob and also in the kitchen oven. We have deliberately opted for pots without feet, as these can be stored in a more space-saving way and can also be used in the normal kitchen. Our pots are already baked so that you can prepare delicious food straight away.
Prices incl. VAT;
Cast-Iron Cookware - Cast Iron Outdoor Cookset
Dutch Oven The Dutch Oven, often referred to simply as a pot (sic), is available here together with a sturdy tripod, a pot stand and, of course, a lid lifter. Although the pot itself is available in three sizes, we only offer it as a set in the two most popular sizes. Of course, the tripod, the lid lifter and the pot stand can also be used with the pound pot (coincidentally also the name of a very popular Dutch Oven dish - but here we mean our 12-quart pot). The pots are also particularly suitable for induction cookers, as well as for all other types (ceramic, open fire, etc.). Please select the desired size.A practical tip from Harry:Tried and tested for travelling: one of the two sets offered here! You can also attach one of these beautiful enamelled percolators to the tripod for making coffee. But be careful! Not all percolators are suitable for this type of coffee preparation! And... the handle can get devilishly hot! Our lid lifter doesn't really help here either. But if anyone knows of a practical way of using the Dutch oven lid lifter with a percolator, please let me knowWhere were we again? Exactly! With our DO sets... ideal for travelling, but probably a little undersized for a garden party. So in itself it's perfectly adequate for a garden party, but not for a G-A-R-T-E-N-P-A-R-T-Y!That's when you need our pound pot - and to supplement and round off the food base, you can always find a quick use for the smaller brother. And if you want to serve the much-quoted icing on the cake as a first aid against second hunger late at night: Take a piece of beef of your choice, it should be around 300-400 grams and nicely marbled, and it must be able to fit into the sizzle pan later (a flank steak is really tasty, but completely unsuitable for this), and put it in the oven set to around 55°C, but not immediately taken out of the fridge - preheating is superfluous, unless your G-A-R-T-E-N-P-A-R-T-Y is taking place in the Arctic Circle.There, in the oven, it can then remain for a long, really long time, but of course not until the end of time. So don't overdo it! And the following really does apply to this preparation: don't add salt! Garlic, thyme and/or rosemary add a familiar flavour, sage and coriander a less familiar but very interesting one. When your guests' appetite for a savoury or tasty treat reawakens, simply let the Sizzel Pan heat up in the embers and then place the meat inside. 45-60 seconds per side is usually sufficient and a knob of good butter should not be missing. Allow the meat to rest for a few more minutes, then cut into slices and serve, then cut into slices and serve sprinkled with salt (flakes!) and freshly ground pepper. Make sure you try it: Lemon pepper! Further information: Our Dutch ovens can be used over an open fire, on the barbecue, on the hob and also in the kitchen oven. We have deliberately opted for pots without legs, as these can be stored in a more space-saving way and can also be used in the normal kitchen. Our pots are already baked so that you can prepare delicious food straight away.
Prices incl. VAT;
König T2 220 / Thule XB-16 size 220 snow chain
Snow chains König T2 220 / Thule XB-16 for 4x4 and SUV, size 220 Product features 16 mm chain link thickness Manual tensioning system: one stop to attach and one stop to tension the chain Closed shortening hooks prevent the chain from twisting Suitable for the following wheel/tyre combinations: 6.7-14, 195/75R-14, 195/80R-14, 185/80R-15, 195/70R-15, 205/65R-15, 175/75R-16, 175/80R-16, 195/65R-16 The Thule snow chain range no longer belongs to the Thule Group but to the König company. The chain models that were previously sold under the Thule brand are now offered under the König brand. You will therefore receive snow chains from either Thule or König.
Prices incl. VAT;
Cable winch kit
Cable winch bundle 3-piece - Robust. Safe. Complete Our 3-piece cable winch bundle is the ideal solution for anyone who prioritises quality and reliability. Perfectly matched and ready for immediate use - whether off-road, in the workshop or in the forest. Included in the set: Steel cable - Heavy-duty cable with high tensile force, abrasion-resistant and durable - approx. 8mm cross-section and approx. 25m Pulley window - Guides the rope gently and prevents damage caused by friction Winch hook - Solid hook with safety catch for reliable work Suitable for most winches Quick assembly Maximum safety and control when pulling and recovering Picture similar!
Prices incl. VAT;
Nakatanenga sun visor organizer SET, incl 2 pcs card holder
Top sun visor organizer set Where to go with all the little things in the vehicle? Here there is more storage space in a double pack! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle.The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, pens, notepad, small flashlight, multitool etc. The Organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Width of the organizer is 290 mm.Material: 100% nylon The Nakatanenga sun visor organizer is available in the following colors: green-brown coyote sand Universally applicable for all vehicles! The mirror & patch are not included. *compared to single purchase
Prices incl. VAT;
VOX microphone 4-pole plug Version 2.0
The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
CB-Radio VOX Microphone
The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.
Prices incl. VAT;
VOX microphone 6-pin
Albrecht CB radio VOX microphones offer the perfect solution for hands-free communication in vehicles in accordance with Section 23 (1a) of the Road Traffic Act, which prohibits the use of microphones by hand in vehicles from July 1st, 2020. These microphones can be used with almost all CB radios on the market. The integrated active noise cancellation function filters out disruptive background noise and offers very clear voice transmission. The integrated battery has an operating time of approx. 60 hours and can also be charged while the microphone is in use. Properties:► for hands-free communication in the vehicle (compliant with § 23 (1a) StVO, which prohibits the use of microphones by hand in vehicles from July 1st, 2020)► Active Noise Cancellation filters out disturbing background noise► VOX sensitivity adjustable in 4 levels► VOX delay adjustable in 4 levels► Impedance: 4.7K ohms► Sensitivity: -58db► Up / Down buttons► integrated battery 3,000 mAh (rechargeable)► Operating time: approx. 60 hours► Can be used while charging► Micro-USB charging socket on the microphone► Connection: 6-pin CB radio plug
Prices incl. VAT;
Trekking Axe with Wooden Handle and Blade Guard
Trekking axe with wooden handle Real outdoor adventures – from simply camping in nature to expert pursuits like survival or bushcraft – are hard to imagine without an axe or hatchet. The requirements are fairly simple: the tools need to be versatile, durable and safe. They need to cut well and should weigh as little as possible. And since axes and hatchets are among mankind’s oldest tools, the most ergonomic and efficient designs are very often the oldest ones. This handy axe by Spanish manufacturer Bellota is made in the tradition of the Biscayne trade axes, a very old, traditional design from the Basque region that has made its biggest impact during the colonization of North America. The Biscayne style features a straight top of the axe head, a short blade and a slightly rounded edge. The head is forged from a single piece of steel, making it very long-lived and virtually indestructible. The straight handle is 38cm or 60cm long and has a conic joint connection with the head – guaranteeing a great degree of safety and it also prevents the axe head from loosening due to impact forces or physical influences like changes in temperature or moisture of the wood. Bellota’s Biscayne axe is great for chopping firewood, trimming branches or felling thin trees. An axe for all situations, at home or in the bush. The Axzt with 38cm wooden shaft is also available in a bundle with Swiss pioneer pick and folding saw with matching storage bag.
Prices incl. VAT;
Butterfly closure stainless steel set of 2 pcs
Durable Butterfly Clasp – Complete Stainless Steel Set Versatile butterfly closure made of stainless steel. It is a sturdy lock with a snap and turn mechanism.This rotary closure is ideally suited for e.g. for DIY projects, transport boxes and much more. The hinged wing is flat and easy to operate. Due to the special construction, the boxes are well protected against accidental opening. Available in a set of 2, 5 or 10 pieces Basic information: not spring loaded stainless steel lockable without shell
Prices incl. VAT;
Bag for UUNI 3 Pizza Oven
Bag for UUNI 3 Pizza Oven Custom-made protective cover for the Uuni 3 pizza oven Also doubles as a carrying bag Weatherproof Only on order Your Uuni oven made of brushed stainless steel is rust-resistant and will serve you well for many years. But if you want it to look like new for longer, you can cover it with the tailor-made protective cover. It has been thoroughly tested in Scottish gardens and protects your Uuni 3 from careless birds, leaves and all kinds of freak weather. Because outdoor cooking is so fun and practical with your Uuni, you may want to take it with you on vacation or on an excursion. Turn the protective cover over, stow away the funnel and snap it off, then put the entire oven in your pocket and you can enjoy a different view while cooking outdoors. Please note: Let your Uuni 3 wood-burning stove cool down completely before covering, or moving it.
Prices incl. VAT;
Sun visor organizer Version 2.0
Where to go with all the little things in the vehicle? There is more storage space here! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle. The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, ballpoint pens, notepad, small flashlight, multitool etc. The organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Integrated zipped pocket and MOLLE loops. Width of the organizer is 290 mm. Material: 100% nylon The Nakatanenga sun visor organizer is available in different colors: green-brown coyote sand Universally applicable for all vehicles! You can find the Nakatanenga card holder here. You can find the matching mirror for the organizer here.
Prices incl. VAT;
Vision-X Vortex CANBUS integration adapter
Vision-X Vortex CANBUS Integration Adapter 1 piece, H4 connectors, to operate the Vision-X Vortex 7" LED headlights in the Jeep Wrangler JK (from 2007). One piece is required per headlight. Delivery without the headlamp shown in the picture!
Prices incl. VAT;