POWERspec TD5 for clutches with dual mass flywheel At LOF Clutches, POWERspec is the next step up from ROADspec when it comes to performance. If your Td5 Defender or Discovery tows regularly or carries extra weight like expedition trucks do, then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward!  This kit features heavy duty friction material, a billet machined center hub as well as an EXTREMEspec release bearing. And by the way, the pedal weight is not heavier than the original. Perfect for vehicles with a Stage2 map/ 450Nm/ 200 bhp. Description: LOF heavy duty friction material Billet machined center hub LOF Clutches EXTREMEspec release bearing G90 High-temp assembly grease Clutch cover Nyloc fasteners 1x CNC wire-formed anti rattle clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original You can find more products for improved clutch performance here: clutch spring Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well! Legal Disclaimer:  Technical modification can result in noise generation. This is not detrimental to the vehicle’s reliability or performance and therefore no cause for complain! Modifications to the vehicle are undertaken at your own risk without warranty for any damages to transmission and drive train.      

POWERspec TD5 Solid Mass Flywheel kit LOF Clutches’ goal was to deliver the best Solid Mass Flywheel kit for Td5 Discovery and Defender. They have engineered this product with two specific objectives: first, to prevent the typical vibrations for Td5 and second, to guarantee long lasting service from clutch and flywheel. At LOF clutches, POWERspec is the next step up from ROADspec when it comes to performance. If you tow regularly or carry extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor POWERspec will keep you moving forward!   And by the way, the pedal weight is not heavier than the original. Dual mass flywheels are prone to overheating in tuned vehicles with remapped engines or when the clutch has to deal with a lot of heavy towing or extreme conditions. Replacing DMFs with solid mass flywheels will prevent thermal damage. LOF’s solid mass flywheels conform to the characteristics of the original flywheels but are much more reliable, durable and even cheaper than components by Valeo or LUK. LOF are testing their replacement kits with leading Land Rover tuning specialists in the UK and Europe. Perfect for vehicles with a Stage2 map/ 450Nm / 200 bhp  Description: LOF heavy duty friction material 1x 3 stage pre-dampened sprung driven plate 1x LOF solid flywheel 1x LOF TD5 clutch cover 1x LOF EXTREMEspec HD release bearing 1x G90 high-temp assembly grease 6x clutch cover bolts 1x CNC wire-formed anti-rattle wire spring clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM 8x flywheel bolts Note from LOF: if this clutch is newly installed, the LOF Powermaster clutch master cylinder and the LOF clutch slave cylinder should not be installed as well. Legal notice: Due to technical changes, noise may be generated. This is technically harmless and therefore no reason for complaint! Installation at your own risk without guarantee for damage to the gearbox and drive train.

VNT EXTREMEspec for TD5 with Dual Mass Flywheel At LOF, EXTREMEspec stands for the ultimate Land Rover clutches! If ROADspec and POWERspec are not enough for your demands, because your Landy is destined for extreme performance in work and play, you will not find anything better than LOF EXTREMEspec clutches. They combine unbeatable performance and everyday handling for all Td5 Discovery and Defender-Models with dual mass flywheel. And by the way, the pedal weight is not heavier than the original. Suitable for vehicles 550 NM/ Stage 3 map/ VNT turbo including Race spec turbo. Description: Extra strong LOF clutch cover Billet machined center hub LOF Clutches EXTREMEspec release bearing G90 high-temp assembly grease Clutch cover Nyloc fastener kit 1x CNC wire-formed bearing retaining clip 1x CNC wire-formed pushrod clip 1x spigot bush OEM 1x fork bush OEM Pedal weight not heavier than original  You can find more products for improved clutch performance here: clutch spring clutch master cylinder clutch slave cylinder    

Finally, Easier Clutch Operation: The Nakatanenga Clutch Spring for Your Defender! It's easy to forget these days, but driving used to be real work, and you don't even have to go back as far as double-clutching or hand-cranking the engine to start. Over the decades, many things in the Defender have become more user-friendly: power steering and electric windows take the strain off your arms, but especially with the TD5 and older models, it's often still the case that your clutch leg needs to be significantly stronger than your accelerator foot. Particularly in the low-range gears off-road, when maneuvering with a trailer, or even in stop-and-go city traffic, the physical effort of pressing the clutch pedal quickly becomes noticeable. As an ergonomic and cost-effective solution to this annoying problem, we now offer a new torsion spring that reduces the effort required for clutching by up to 45% compared to original return springs. The new spring can be installed in 300Tdi, Td5, and Td4 models. The necessary bushings are supplied. The conversion at the clutch pedal also works on models older than those mentioned above if retrofitting with a newer pedal box is possible. We are, of course, happy to help with any questions regarding this. These are your advantages at a glance: Noticeably Lighter Clutch Operation: Reduces the required pedal force and makes clutching significantly more pleasant – a difference you'll notice immediately! More Driving Comfort: Relieve strain on your left leg, especially in stop-and-go traffic, off-road, or on extended journeys. Easy Installation: The spring is designed so that it can be relatively easily exchanged for the original spring. Perfect Fit for Your Defender: Developed for Land Rover Defender models (please note compatibility with your exact model year and type, especially for 300 Tdi, Td5, Td4 2.4 & 2.2). Small Change, Big Impact: An often-underestimated modification that can significantly improve everyday driving with your Defender. Many Defender drivers swear by this simple yet effective optimization. If you desire more comfort when clutching without changing the fundamental characteristics of your vehicle, this spring is the ideal solution. Give your left foot a break! Order the Nakatanenga Clutch Spring now and experience a new level of shifting comfort in your Defender! If you're looking for a technically more sophisticated solution with even greater force reduction, you should take a look at our POWERmaster master cylinder for the clutch hydraulics here. You can find bearings and bushings as spare parts here.      

For more stability and smooth running Improved intermediate shaft for the MT82 gearbox in the Land Rover Defender TD4 / TDCi / Puma 2.4 / 2.2 Known problem: The intermediate shaft on the TD4 / TDCi / Puma 2.4 / 2.2 models is not greased and is not supplied with oil. The connection of the two-part intermediate shaft wears out after prolonged use, since the shaft with the outer gear rim is in direct contact with the shaft with the inner gear rim. In the worst case, this wear causes the ring gear to shear off and the vehicle to stop. Regular greasing of the ring gear helps, but is very cumbersome in the long run. Our solution: The improved intermediate shaft supplies itself with the oil of the gearbox and thus prevents the shafts from wearing out. Easy and uncomplicated!

Set for overhauling the starter motor of the Defender Discovery Td5 In 99 per cent of all the cases that a Td5 starter is replaced it is not the actual motor itself, but the magnetic switch that is broken. Often its contacts are burned or worn, which still allows the starter to spin, but without the engine starting or only starting very reluctantly. For these cases we offer a cost-effective solution: with our service kit you can overhaul your starter yourself for a fraction of the price for a new OE starter (more than EUR 400,-). This is an easy DIY job without the need for special tools or expertise. Note: our starter service kit is not available at the manufacturers DENSO or Land Rover! In contrast to many cheap offers, ONLY WE offer a complete kit with all necessery parts as well as enlarged and strengthened contact plates.