Roof racks - systems and accessories

Nakatanenga CargoBear for Ineos Grenadier The launch of the Ineos Grenadier was without a doubt the biggest event for the off-road community since the launch of the new Defender. And since the two are more or less officially competing for the title of best successor to the old Landy, it's a pretty exciting affair. When it comes to the shape of the roof, the new Ineos is hardly distinguishable from the old Defender, including the slope at the front, the side gutters and the mighty roof load of 150 kg (dynamic load) and 420 kg (static). All of that makes it a joy to fit the Grenadier with our CargoBear modular roof rack. The legendary CargoBear is just as ambitious and versatile as the British newcomer with its Bavarian-Austrian technology and old-school look. The CargoBear for the Grenadier (Station Wagon/Utility Wagon) can be ordered in four variations – but thanks to our modular system, subsequent conversions or add-ons are easily done, whenever your specific requirements change. In the simplest, open version, the roof rack consists of three crossbars, a wind deflector at the front and the end carrier at the rear. For closed and therefore fully accessible platforms, the Bear is available in three further versions: As a short roof rack with three crossbars, two closed sections between the bars, a wind deflector and end panel. As a long version with four crossbars, three closed sections between the bars, a wind deflector and end panel. There is also a special version for grenadiers with safari windows in the front roof. Here the rear two sections are fully closed, the front one has two openings on the sides, so as not to obstruct the safari windows. As with the old Landy, the ultra-flat roof rack is simply mounted to the roof gutters by clamping brackets. A hybrid solution specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof to take excessive load off the gutters. As always, all aluminum and stainless steel components of the CargoBear are powder-coated in black. This makes them a perfect match for the purist design of the Grenadier. Ineos Grenadier and CargoBear - the ultimate combination for work, sport, camping or expedition! Material:Crossbar, platform, wind deflector and end panel: powder-coated aluminum (black)U-profiles and support brackets: Stainless steel powder-coated (black) MADE IN GERMANY

Maximum transport power: Nakatanenga CargoBear for the Ineos Grenadier Quartermaster If you are looking for a truly distinct and exclusive pickup truck, look no further than the Quartermaster from Ineos, with its generous load bed and spacious double cab. To top it off, literally, our custom-made CargoBear roof rack system adds even more functionality to the rugged Grenadier. Our modular rack system transforms this workhorse with its BMW power and Magna Steyr engineering into a true adventurer. The Quartermaster's high roof load capacity of 120 kg dynamic and 375 kg static is ideal for expedition equipment or, for example, our RoofLodge roof tents.   The modular rack for the double cab's roof, which is shorter than that of the Station Wagon, is 1.83 m long when fully assembled and consists of three crossbars, two platform components, a wind deflector at the front and an end plate at the rear. The CargoBear’s Quartermaster version fits models with or without safari windows.    The ultra-flat roof rack is easily mounted to the roof rails with clamps. A hybrid solution (from the second crossbar) specially adapted to the Grenadier provides even more stability: additional U-profiles and support brackets connect the CargoBear to the handles on the roof surface to relieve the pressure on the rather soft roof rail.   As always, all aluminum and stainless steel components on the CargoBear are powder-coated in black. This means they fit perfectly with the purist design of the Grenadier.   Ineos Grenadier Quartermaster and CargoBear – the ultimate combination for work, sports, vacations or expeditions!   Material: •    3 x crossbars, 2 x platform, wind deflector, and end carrier: powder-coated aluminum (black) •    Support brackets and clamping brackets: powder-coated stainless steel (black)  

Nakatanenga CargoBear 2.0 | Lightweight. Strong. Clever for Mercedes G When it comes to powerful performance, our very own CargoBear is definitely the Grizzly among roof racks. Strong, sturdy and massively versatile, it was way ahead of its time when we introduced it in 2016. But the world is turning, evolution doesn’t favor a standstill and if you want to survive in nature, you need to keep innovating. Leaner and meaner is this new bear, the CargoBear 2.0, when he emerges from his winter den in Berg. Same load bearing strength, same solidity, same rigidity, but greatly reduced fight weight: Your 4x4 has to carry around 30 % less weight on the roof. And on top of it, the new CargoBear comes with a reduced price tag as well. How did we do it? The crucial difference lies in a new construction design. Removing the comparatively heavy longitudinal connecting beams, their structural function has been taken over by newly developed perforated HIGRIP plates between the crossbars and angled end-plates for the sides. The new design achieves (nearly) the same structural strength as its predecessor but reduces the net weight considerably.  The CargoBear 2.0 has been designed for a load capacity of 300 kg off-road (with evenly distributed load). This can easily be doubled on the road. Theoretically, that is, because it’s important to make two points when it comes to roof racks. One, keep in mind that your vehicle’s center of gravity can shift upwards considerably when carrying a roof rack with cargo, especially off-road. And two, when loading your roof rack, the limitations will most likely result from your vehicles approved roof load which in most cases will be significantly below the specifications of the rack itself. Some of the CargoBear 2.0’s features stay the same, however, because we found them hard to improve: this includes the jet-black, super-flat look, the high-performance material and the modular versatility. Furthermore, all accessories, additional components, roof tents etc. are fully compatible with the first generation. The long G-Class will finally get a CargoBear with four crossbars.  And last but not least, the old heavier CargoBear with longitudinal beams and checker plate will be continued exclusively for classic Defenders who need specific heavy-duty applications.The CargoBear does NOT fit the Mercedes G model W465 from model year 2024! Measured from the gutter, the CargoBear is approx. 20cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.

Nakatanenga CargoBear 2.0 system roof rack for Land Rover New Defender from 2020 onwards 110 CargoBear, meet the New Defender! New Defender, meet the CargoBear! Two legends are coming together for the first time: the new Land Rover Defender, arguably the most complete 4x4 off-road vehicle at present, and our tried and tested, very successful modular roof rack system CargoBear. The bear crowns every new Landy, whether it’s a 90 or a 110. At Nakatanenga, we took our time to finetune the CargoBear for every design detail, technical specification and user requirement the Defender L663 (from MY 2020) challenged us with. At its full length of 2.41 m, our rack consists of 3 crossbars, two platform elements as well as front and rear modules. The overall width of 1.20 m gives you almost 3 square meters of fully usable cargo space. The entire surface can be loaded and walked upon – a decisive advantage over many competing products. The CargoBear is screwed into the original mounting points of the roof rails which have to be removed, of course. Another great advantage over the competition is the fact that you can configure the CargoBear rack in two heights: At 100 mm, the glass roof – if you have one –remains fully functional. If your Defender doesn’t have a glass roof or if you prefer a lower, more streamlined profile, the rack can be mounted at only 80mm above the roof. Whether you’re choosing the high or low mount, aerodynamics was always our main concern in the CargoBear’s development. There are no legally required speed limits when driving with the rack, but we recommend a top speed of 160 km/h when empty and 130 km/h when loaded. For the overall load capacity please refer to your owner’s manual and the specific version or configuration of your vehicle. The roof rack’s weight of up to 50 kg has to be deducted from the dynamic load capacity. The new Defender’s overall look is perfectly complimented by the matte black powder coating of both aluminum and stainless steel elements. While the V-shaped rear module accommodates the antenna and the rear view camera and guarantees full functionality, the front element is specifically designed to easily integrate an Osram VX1000-CB or other light bars. New Defender and CargoBear – the ultimate combo for work, holiday or expedition! Material:Crossbars and Platform sheets: aluminum, matte black powder coatingMounting rails: stainless steel, matte black powder coating

Nakatanenga CargoBear 2.0 – The Lightweight and High-Performance Roof Rack Quick navigation: The standard combinations of the modules Available lengths (dimensions and weights) Mounting instructions and downloads When it comes to powerful performance, our very own CargoBear is definitely the Grizzly among roof racks. Strong, sturdy and massively versatile, it was way ahead of its time when we introduced it in 2016. But the world is turning, evolution doesn’t favor a standstill and if you want to survive in nature, you need to keep innovating. Leaner and meaner is this new bear, the CargoBear 2.0, when he emerges from his winter den in Berg. Same load bearing strength, same solidity, same rigidity, but greatly reduced fight weight: Your 4x4 has to carry around 30 % less weight on the roof. And on top of it, the new CargoBear comes with a reduced price tag as well. How did we do it? The crucial difference lies in a new construction design. Removing the comparatively heavy longitudinal connecting beams, their structural function has been taken over by newly developed perforated HIGRIP plates between the crossbars and angled end-plates for the sides. The new design achieves (nearly) the same structural strength as its predecessor but reduces the net weight considerably.  The CargoBear 2.0 has been designed for a load capacity of 300 kg off-road (with evenly distributed load). This can easily be doubled on the road. Theoretically, that is, because it’s important to make two points when it comes to roof racks. One, keep in mind that your vehicle’s centre of gravity can shift upwards considerably when carrying a roof rack with cargo, especially off-road. And two, when loading your roof rack, the limitations will most likely result from your vehicles approved roof load which in most cases will be significantly below the specifications of the rack itself. Some of the CargoBear 2.0’s features stay the same, however, because we found them hard to improve: this includes the jet-black, super-flat look, the high-performance material and the modular versatility. Furthermore, all accessories, additional components, roof tents etc. are fully compatible with the first generation.  And last but not least, the old heavier CargoBear with longitudinal beams and checker plate will be continued exclusively for classic Defenders who need specific heavy-duty applications.  PLEASE NOTE: In Defender with pop-up roof / lift roof, the original roof is often shortened. If necessary, the roof rack then does not fit. Please measure beforehand or contact us in advance if you have any questions. Please note:When using a snorkel, the wind deflector may need to be adjusted. Please note: The CargoBear can be used on an AluCab pop-up roof.  The standard combinations of modules:(Click to enlarge) Defender 90 1,890 mm - 2 Modules optional: end beam, wind deflector Defender 90 2,075 mm - 3 Modules optional: end beam, wind deflector Defender 90 2,075 mm - 3 Modules incl. inclined extension (front module) optional: end beam Defender 90 1,005 mm - 1 Moduls optional: end beam, wind deflector                 Defender 110 SW/HT 2,775 mm - 3 Modules optional: end beam, wind deflector  Defender 110 SW/HT 2,765 mm - 3 Modules incl. inclined extension (front module) optional: end beam Defender 110 SW/HT 1,890 mm - 2 Modules optional: end beam, wind deflector Defender 110 SW/HT 1,005 mm - 1 Moduls optional: end beam, wind deflector                 Defender 110 DC 1,545 mm - 2 Modules optional: end beam, wind deflector Defender 110 DC 1,545 mm - 2 Modules incl. inclined extension (front module) optional: end beam Defender 110 DC 1,005 mm - 1 Moduls optional: end beam, wind deflector                 Defender 130 1,545 mm - 2 Modules  optional: end beam, wind deflector  Defender 130 1,545 mm - 2 Modules incl. inclined extension (front module) optional: end beam Defender 130 1,005 mm - 1 Moduls optional: end beam, wind deflector                   Available lengths (dimensions and weights): Module:   Länge: Gewicht: 1 Modul: 1x L 1,005 mm   2 Module: 1x L + 1x K 1,545 mm - geeignet für 110 DC, 130 CC   2 Module: 2x L 1,890 mm - geeignet für 90 er   3 Module: 3x L 2,775 mm - geeignet für 110 SW/HT   3 Module mit schräger oder normaler Eweiterung: 1x L + 2x K 2,075 mm - optimal für 90er   3 Module mit schräger Eweiterung: 3x L 2,765 mm - optimal für 110er   Schräges Erweiterungsmodul:   875 mm Erweiterungsmodul lang:   885 mm   Erweiterungsmodul kurz:   540 mm     Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12N m Measured from the gutter, the CargoBear is approx. 23 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. You can find ideal protection for the lashing rail profile on the CargoBear or for all other lashing rails here. If you require spare parts or upgrades for the CargoBear 1.0, please simply send us an email at  info@nakatanenga.de or call us on ☎ +49 9181 466 644.

Nakatanenga CargoBear system roof rack incl wind deflector and end carrier - for Suzuki Jimny 2, type GJ / HJ Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II GJ / HJ. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny –  due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack to individually adapt to your needs. The CargoBear’s flat roof silhouette reduces aerodynamic losses and the modular design protects the car’s roof and body by effectively absorbing torsion forces. The deep black, high-quality powder-coated CargoBear modules made of aluminum-magnesium alloy are manufactured entirely in Germany. The bear’s skeleton is made up of either two or three crossbeams. The beams also work by themselves as roof racks. Two panels fit each segment between a pair of crossbars, creating either a short or a full platform over the entire length of the roof. An accompanying wind deflector at the front further improves the aerodynamics of the roof rack, which is already very flat, and offers the possibility of mounting the Osram SX180 or SX300 light bars via special holes. For the rear, an end carrier is included for mounting additional headlights, handles or other accessories. The modular structure over the entire area allows for a flexible yet precise arrangement of lashing points, thereby making your roof load much more secure. Fittings are inserted in the lashing grid on the side or on top of the rack. Single stud fittings are recommended for lighter loads. If it gets heavier, choose ring fittings with double studs. As the name implies, two studs instead of one are inserted into the lashing grid, effectively halving the forces exerted on each point in the grid. The CargoBear’s panels feature a perforated non-slip design, contributing further to your load safety. The modules are supplied with all the necessary fastening material. Wind deflector and end carrier are included in the scope of delivery. Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6cm - depending on the roof, condition, year of construction etc.

ExRoof roof rack for Volkswagen Transporter & Multivan T5/T5.1/T6/T6.1 - L2/SWB with long wheelbase (year of construction 2003 to present) Attention: Not compatible with VW T6 California (pop-up roof) and VW T6 Doka (flatbed with double cab)   The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the VW Multivan & Transporter of the T5 / T5.1 / T6 / T6.1 model series with long wheelbase (L2/SWB) is made of powder-coated aluminum and therefore weighs just 49.7 kg. Measuring 2950 x 1500 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Practical accessories such as ring eyelets, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack. Product highlights: Roof rack uses the original mounting points, no drilling required Compatible with VW T5 & T6 Multivan, Transporter, Caravelle and Kombi Rubber pad between roof rack base and vehicle to protect against corrosion Four individual roof rack feet provide stability in a lightweight construction Hardly any wind noise thanks to aerodynamic deflector Technical data: Dimensions: 2950 x 1500 mm (platform) Weight: 49.70 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Height: approx. 10 cm (at the highest point between the car roof and the upper edge of the roof rack) Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

The innovative horntools ExRoof roof rack is your perfect everyday companion! Attention: Not compatible with VW T6 California (pop-up roof) and VW T6 Doka (flatbed with double cab)   Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the VW Multivan / Transporter / Caravelle / Kombi of the T5/ T5.1 / T6 / T6.1 (L1/SWB) / short wheelbase model series is made of powder-coated aluminum and therefore weighs just 47 kg. With a size of 2675 x 1500 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Roof rack uses the original mounting points, no drilling required Compatible with VW T5 & T6 Multivan, Transporter, Caravelle and Kombi With rubber pads between roof rack base and vehicle to protect against corrosion Four individual roof rack feet provide stability in a lightweight construction Hardly any wind noise thanks to aerodynamic deflector ExRoof roof rack for Volkswagen Transporter & Multivan T5 / T5.1 / T6 / T6.1 - L1 / SWB with short wheelbase (year of construction 2003 to present)   Practical accessories such as ring eyelets, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack.   Technical data: Dimensions: 2675 x 1500 mm (platform) Weight: 47 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Height: approx. 10 cm (at the highest point between the car roof and the top edge of the roof rack) Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

Horntools ExRoof roof rack - a perfect fit for the G-Class The ExRoof roof rack from horntools was specially developed for the Mercedes G-Class and is the ideal solution for everyday use and adventure. Thanks to the all-round profile rails, a wide range of accessories can be flexibly attached using slot nuts - from roof tents to transport boxes.   Made from lightweight but durable aluminium, the carrier weighs just 46.3 kg. With a generous surface area of 2400 x 1500 mm, it offers plenty of space for your equipment - perfect for anyone who wants to customise their G-Class without drilling.    Technical information: Roof rack uses the original attachment points, no drilling required With rubber pads between roof rack base and vehicle to protect against corrosion Specially developed for the Mercedes G-Class from model year 2018 Hardly any wind noise thanks to aerodynamic deflector Dimensions: 2400 x 1500 x 49 mm Weight: 46.3 kg (roof rack feet + roof rack platform) Finish: RAL 9005 powder-coated Height: approx. 12.5 cm (at the highest point between the car roof and the upper edge of the roof rack) Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

Horntools Roof Rack Aluminium - Land Cruiser J25 Product highlights:   Compatible with Toyota Land Cruiser J25 (from model year 2024) Made of high-quality powder-coated aluminium Easy to mount on the original mounting points of the Land Cruiser - no drilling required The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Toyota Land Cruiser is made of powder-coated aluminium and therefore weighs just 40.1 kg. With the size of 2125 x 1350 mm, you have enough space on the Land Cruiser to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Technical information: Roof rack uses the original attachment points, no drilling required Specially developed for the new Toyota Land Cruiser J25 Hardly any wind noise thanks to the aerodynamic deflector Dimensions: 2125 x 1350 x 49 mm Weight: 40.1 kg (roof rack feet + roof rack platform) Finish: RAL 9005 powder-coated Height: approx. 13 cm (at the highest point between the car roof and the top edge of the roof rack) Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

ExRoof roof rack for Peugeot Expert L2, Citroen Jumpy L2, Opel Vivaro L2 & Toyota Proace L2 The ExRoof roof rack is your perfect everyday companion. Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The horntools ExRoof is made of powder-coated aluminum and therefore weighs only 40 kg. With a size of 2400 mm x 1500 mm x 49 mm, you have enough space to store your accessories.   Attention:   Only suitable for vehicle variant with hinged doors.   Technical data: Material: Aluminum 6063 Weight: 40 kg Surface: Powder coating Size: 2400 mm x 1500 mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution:   Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

High quality Nakatanenga crossbars for Land Rover Defender Who does not need an entire roof rack on his Land Rover Defender, because just want to mount a roof tent on two cross-beams, for which the Nakatanenga CargoBear crossbars are optimally suited! They are identical to the crossbars of the CargoBear roof rack and therefore combine all their advantages: made of a light and stable aluminum-magnesium alloy (AlMg3) high quality powder coated (RAL 9005 - deep black) width: 1.450 mm (of which 1.300 mm for the usable area) length: 120 mm completely made in Germany Furthermore, two or three brackets can be upgraded by buying the missing parts to a full CargoBear roof rack - this is just the advantage of the modular system carrier! Of course, numerous accessories for the CargoBear roof rack with the crossbars can be used. Please note: The CargoBear roof rack / crossbar can not be installed on defenders that have a ribbed roof (see photo). An approximate indication of the series is between 1983 and 1989. Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm Measured from the gutter, the Cargobear is approx. 23 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc.

Nakatanenga CargoBear - crossbar - for Mercedes G Who does not need an entire roof rack on his Mercedes G because he e.g. If you only want to install a roof tent on two crossbars, the CargoBear cross bars are ideal for that! They are structurally identical to the crossbars of the CargoBear Mercedes G roof racks and therefore also offer their advantages: made of a light and stable aluminum-magnesium alloy (AlMg3) high quality powder-coated (RAL 9005 - jet black) width: 1.505 mm (thereof 1.350 mm for the usable area) length: 120 mm completely made in Germany Since our CargoBear roof racks are modular system racks, you can upgrade two or three brackets to the full roof rack by purchasing the missing parts! Of course, numerous accessories can also be used for the CargoBear roof rack with the crossbars. Installation note:M10 lens head: 20 Nm to 25 NmM6 lens cylinder head: 10 Nm to 12 Nm Measured from the gutter, the CargoBear is approx. 20cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all CargoBear 1 + 2 roof racks!

The perfect roof rack for your Subaru Forester 2025 - ready for any adventure! Compatible with Subaru Forester year 2025 (with raised railing) Made of high-quality powder-coated aluminium Easy to mount on the roof rails (no drilling required) Hardly any wind noise thanks to targeted airflow guidance with the help of a specific wind deflector Lightweight construction system thanks to the use of individual roof rack feet The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Subaru Forester 2025 is made of powder-coated aluminium and therefore weighs just 22 kg. With a size of 1400 x 1280 mm, you have enough space on the Forester to mount a roof tent, transport boxes, tools or other accessories on the roof of your vehicle. Practical accessories such as eyebolts, quick-release roof tent fasteners, awning brackets and more are also available for the ExRoof roof rack. Mounting information:Compatible with the Trend, Active & Exclusive models. Not compatible with the Platinum model. Only compatible with Subaru Forester 2025 with a raised railing, not compatible with surface-mounted railing! Technical data:Dimensions: 1400 x 1280 x 49 mm Weight:22 kg (roof rack feet + roof rack platform) Surface:RAL 9005 (powder-coated) Additional height:15 cm above the vehicle roof  

ExRoof cargo bed support - suitable for roll cover systems With the ExRoof platform for the cargo bed, you can create additional storage space in your pickup and get the most out of your cargo bed. The cargo bed support has been specially developed for cargo beds with roller blinds. The feet are mounted on the C-rail. All accessories can be easily attached to the ExRoof cross profiles using slot nuts, such as awning brackets, eyebolts for lashing straps, quick-release roof tent fasteners, brackets for sand sheets and much more. The carrier offers sufficient space for a roof tent or transport boxes. The total height is 29 cm. The maximum permitted load depends on the permitted load capacity of the roll cover. With the Mountain Top, for example, a maximum of 75 kg is permitted.   Technical data: Platform dimensions (L x W x H): 1400 x 1350 x 49 mm Total height (feet + platform): 290 mm Platform material: aluminium (powder-coated) Feet material: steel (S235 JR, powder-coated) Colour: black Total weight: 24 kg Compatibility: Horizontal T-slots required on both sides of the cargo bed Distance between the T-slots: minimum 1000 mm, maximum 1360 mm Check insertion of the T-bolts supplied (see technical drawing) Note risk of collision with any existing cabin-side styling bars Scope of delivery: 1 x ExRoof platform 4 x mounting feet for cargo bed (on C-rail) Mounting material Installation instructions

Nakatanenga CargoBear cross bars  There’s only one real alternative for the full CargoBear roof rack: the CargoBear cross bars on their own! If you don’t need the entire cargo platform on your New Defender, because you carry only long work equipment or sports gear like surfboards, skis or kayaks, the cross bars alone will do the job perfectly. The same applies for roof tent campers. For the new 110 Landy this means that the standard setup consists of 3 cross beams for the entire length of the roof. The sturdy bars will give you a roof rack that is significantly more robust than any off-the-shelf rooftop carrier. The cross bars are available single or as sets of 2 or 3. They are 100% identical to the ones we sell in the CargoBear kits, i.e. they are 1,450 mm wide (1,300 mm usable) and 120 mm long. The aluminum bars feature stainless steel bases that connect to the standard roof rail via inserted sliding blocks (included). As with the complete CargoBear platform, the bars can be mounted on two height levels, 80 or 100 mm respectively. Choosing the higher level will ensure that your roof window retains its full functionality. The crossbars feature a very wear and tear resistant matte black RAL 9005 powder-coating. A great number of recessed lashing slots allow you to attach lashing rings, brackets, hooks, stud fittings etc. You can also attach your lashing straps directly, of course. The standard CargoBear accessories will also fit the various lashing and mounting points. Thanks to the modular system, this makes a future upgrade to a full CargoBear platform absolutely hassle-free.

Ideal carrier system for off-road use and for tradesmen Off-road use with the Ford Ranger requires particularly stable mounts, as the vehicle is exposed to higher forces. We have built the platform for the Ford Ranger / Raptor with this in mind. You have sufficient space and fastening options for attaching load securing devices or bolting on practical roof rack accessories. Heavy loads on the roof of the Ford Ranger can therefore be positioned anywhere on the roof rack platform and securely lashed down. Both across the roof and in the direction of travel. Roof rack uses the original attachment points, no drilling required Compatible with Ford Ranger (XL, XLT and Tremor from 2023), Ford Ranger Raptor (from 2023) and VW Amarok (Entry, Style and Life from 2023) Aerodynamic deflector is included in the scope of delivery ExRoof roof rack for Ford Ranger & Raptor (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Ford Ranger / Raptor is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   This Ford Ranger roof rack is also very popular with tradesmen. If the loading area of the pick-up is no longer sufficient for tools or other transport items, toolboxes or ladders can be safely stowed on the platform.   Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

ExRoof roof rack for Isuzu D-Max 2021 Double Cab (from year of construction 2021)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.  

ExRoof roof rack for Ford Ranger Double Cab (year of construction 2016 to 2022)   The ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: - Material: Aluminum 6063 - Weight: 20 kg - Surface: Powder coating - Size: 1600 mm x 1250 mm x 49 mm   Scope of delivery - Base carrier - Roof rack feet - Fastening material and installation instructions   Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg   The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary.   The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

ExRoof roof rack for Mitsubishi L200 (from model year 2016)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

ExRoof roof rack for Volkswagen® Amarok Double Cab (from year of construction 2010 to 2022)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.   The manufacturer responsible for the modifications/conversions is horntools GmbH, not Volkswagen AG. Volkswagen AG accepts no responsibility or liability for any negative effects that may occur as a result of the modifications to the vehicle.    

ExRoof roof rack for Volkswagen Amarok (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any attachments can be attached using sliding blocks. The ExRoof roof rack for the Volkswagen Amarok is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Practical accessories such as eyebolts, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack.   Product highlights Roof rack uses the original mounting points, no drilling required Compatible with Volkswagen Amarok (from model year 2023) Aerodynamic deflector is included in the scope of delivery Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

Roof rack ExRoof for Volkswagen Caddy V Standard, Cargo, California & California Camper - L1 / SWB (year of construction 2020 to today) Roof rack uses the original mounting points, no drilling required Compatible with all VW Caddy V L1 variants (Caddy V & Caddy V Cargo) Rubber pad between roof rack base and vehicle to protect against corrosion Two individual roof rack feet provide stability in a lightweight construction Many practical accessories available Dimensions: 1698 x 1350 mm (platform)   The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any number of add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Volkswagen Caddy V Standard, Cargo, California & California Camper (L1 / SWB) with short wheelbase is made of powder-coated aluminum and therefore weighs just 32 kg. With a size of 1698 x 1350 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Technical data: Dimensions: 1698 x 1350 mm (platform) Weight: 32 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions Installation info:   For the following model variants, the OEM railing of the vehicle must be removed before fitting the roof rack platform:   Caddy V California Caddy V California Camper Caddy V Life Caddy V Dark Label Caddy V Style Caddy V Family Caddy V Edition Caddy V PanAmericana Caddy V Cargo Edition Caddy V Cargo PanAmericana Attention: Not compatible with VW Caddy V Maxi variants    

Nakatanenga CargoBear Roof Rack Crossbar Pack a bear on your roof, the CargoBear! Or, in this case, our new bear cub. The modular roof rack system that has revolutionized the attic conversions on top of Defenders and G-Wagons is now also available for the Jimny II. The small workhorse from Suzuki is a big performer but has one major disadvantage: the Jimny – due to conceptual constraints – suffers from massive lack of space on the inside. Farmers, foresters and other friends of the 4x4 quickly reach the limits of the Mini-Defender when storing tools and equipment. With the CargoBear for the petite Japanese, there is now a modular and highly flexible roof rack that can be individually adapted to your needs. And what’s best: the CargoBear can grow with your tasks. The key elements in our modular concept are the deep black, high-quality powder-coated crossbeams made of aluminum-magnesium alloy. They are entirely Made in Germany and two or three of these cross bars already make up a sturdy and highly versatile roof rack with a great number of lashing points and custom extendability. Longer gear like ladders, ski or surfing equipment, kayaks and many other objects can be transported safely and securely on the roof of the little grasshopper. If your requirements grow over time, you can always turn the bare crossbeam structure into the full platform by adding the remaining panels, the wind deflector and the end bracket. The cross beams are supplied with two clamps each and all the necessary fastening material. Material: Aluminum-Magnesium-Alloy (AlMg3), high-quality powder-coated Color: Deep Black RAL 9005Width: 1,346 mm (1,313 mm usable space) Measured from the gutter, the CargoBear is approx. 15 cm high. On the roof it is approx. 5-6 cm - depending on the roof, condition, year of construction etc. Suitable for all Cargobear 2 roof racks

Nakatanenga CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

Nakatanenga CargoBear - Crossbar angled / low Suitable for CargoBear angled wind deflector  Material:  Aluminum, black matt powder-coated RAL 9005 incl. fastening material Slanted/low crossbar is the matching bracket for slanted wind deflector suitable for all CargoBear 1 + 2 roof racks! can only be mounted at A-pillar height Suitable for mounting lamps and headlights

Your G Needs Access – Safe and Stylish with the NakatanengaCargoBear Rear Ladder! You love your Mercedes G and use it for what it's made for: adventure! But what good is the best roof rack if the equipment on it is hard to reach? Especially with an imposing vehicle like the G-Class, safe access is worth its weight in gold. Our CargoBear rear ladder for the right-hand side of the vehicle is the solution – robust, a perfect fit, and elegant. Thoughtfully Designed Down to the Last Detail for Your Comfort and Safety: This rear ladder is more than just a simple step. Made from lightweight yet extremely stable aluminum, it makes accessing your roof rack child's play. Ergonomic and Safe: With its four wide rungs and clever angling that follows the contour of your G's rear, you can climb up and down comfortably and, above all, safely. The ladder is wider at the bottom than at the top, which makes descending even easier. Robust and Chic: The high-quality powder coating in a silk-matt black not only looks great but is also extremely resistant to the rigors of everyday off-road life. Perfect Fit for Your G: Our rear ladder is suitable for a variety of G-Class models: W460 (model year 1979-1992) W461 (from model year 1992) W462 (ELBO variant) W463 (model year 1990-2018) Flexible Mounting: The ladder is simply hooked into the rain gutter at the top and screwed in. For the lower attachment, you have a choice: Standard: Secure attachment with strong 3M double-sided adhesive tape. Optional: For an even more robust connection, you can drill two holes and screw the ladder on with the supplied blind rivet nuts. G Professional: Here you can mount the ladder directly to existing screw points on your vehicle. Make your Mercedes G even more functional and safer. With the CargoBear rear ladder, you can reach your equipment on the roof in no time and give your vehicle a professional look at the same time. Get this indispensable accessory now!

Rear ladder for Mercedes G With this ladder you have easy and safe access to your roof rack. Mounting on the left side. You can find an article for mounting on the right-hand side here. Material: aluminum, powder coated black satin finish Note:With W460 the filler neck is accessible through the ladder.

Nakatanenga CargoBear Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg

Thule roof bar for Land Rover vehicles Thule roof bar for Land Rover vehicles, optionally for Land Rover Defender or Land Rover Discovery 1 / 2, consisting of two crossbars and feet in suitable height for rain gutter mounting.Thule roof racks or roof bars have been synonymous with quality and safety for decades, even under tough conditions. They are therefore ideally suited for mounting roof tents, roof boxes, equipment carriers of all kinds and much more.Technical data:    Load capacity: 100 kg (dynamic, i.e. while driving).    Max. roof load Roof load: according to vehicle manufacturer's specifications    Material feet: sheet steel, galvanised, powder coated, Pebax coating    Material of crossbar: Square steel tube, powder-coated    Assembly: Quick assembly without tools using central nut    Lockable: No, but can be retrofitted with lockable tommy nuts    Foot height: Suitable for Discovery I / II or Defender 90 / 110 / 130    Length of cross struts: 150 cm    Foot height: 20 cmPlease note the maximum roof load of the vehicle according to the manufacturer's specifications!Please select your vehicle type.

Wind deflector suitable for Nakatanenga CargoBear 2.0 Suzuki Jimny 2 (GJ) Material: aluminum, black matt powder-coated Incl. mounting material