Roof racks - systems and accessories
CargoBear closure carrier Defender until MY2016
Nakatanenga CargoBear end plate Defender Beautiful and handy, this CargoBear end plate for the Defender. Beautiful because it adds the finishing touch to the design of the already extremely attractive black bear. Particularly on the short Landy, with the roof rack configuration of three crossbars and two perforated board surfaces, the wind deflector and end panel round off the look perfectly on both sides and, above all, provide the ideal roof rack length for the vehicle. And then, as already mentioned, the end panel is also very handy because we have integrated a handle on both sides, which makes climbing up to the roof level much easier and safer. The end module also extends the usable loading area by another 9 cm and offers additional space for attaching work LEDs, fastenings, lashing points and the like. Above all, however, it can protect the rear edge of the roof when loading and unloading the bear - depending on the CargoBear configuration and vehicle. As always in our modular CargoBear system, the material is a black, powder-coated aluminum-magnesium alloy with a non-slip perforated plate structure. The end plate is supplied with all the necessary fastening material. Material: Aluminum-magnesium alloy (AlMg3), high-quality powder-coated Color: Deep black RAL 9005 Width: 1,450 mm Suitable for all CargoBear 1 + 2 roof racks.
Prices incl. VAT;
CargoBear wind deflector for Mercedes G roof rack CargoBear
Wind Deflector for Nakatanenga CargoBear 1.0 & 2.0 – Mercedes G-Class Enhance the aerodynamics and functionality of your CargoBear roof rack with this wind deflector, designed specifically for the Mercedes G-Class and compatible with both CargoBear 1.0 and 2.0 systems. Made from black, matte powder-coated aluminium, the deflector extends the rack by 10 cm at the front and improves airflow over the already low-profile system. Pre-drilled holes allow for easy and secure mounting of Osram SX180 lightbars, giving you more versatility for off-road or overland use. Material: Aluminium, black matte powder-coatedIncludes: Mounting hardwareExtension: Adds 10 cm to the front of the CargoBear rack A smart upgrade for both performance and lighting integration.
Prices incl. VAT;
CargoBear wind deflector for Defender-CargoBear roof racks
Wind deflector suitable for Nakatanenga CargoBear 2.0 Land Rover Defender Material: aluminium, black matt powder-coated Incl. Mounting material Suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.
Prices incl. VAT;
CargoBear Wind Deflector for Defender-CargoBear - SLIDE
Wind deflector - suitable for Nakatanenga CargoBear 1.0 and CargoBear 2.0 Land Rover Defender - for sloping element Material: Aluminium, black matt powder-coated RAL 9005 incl. fixing material the wind deflector extends the CargoBear by 10 cm. lightbars or headlights can be mounted on the wind deflector. suitable for all CargoBear 1 + 2 roof racks! Please note: When using a snorkel, the wind deflector may need to be adjusted.
Prices incl. VAT;
Roof rack railing and spoiler
Roof Accessories for NAVIS PickUp: Spoiler and Rail in Black Roof rack NAVIS spoiler RAIL & FLAT PickUp roof rail Alu black:The spoiler reduces the wind noise and is suitable for all NAVIS roof racks. Roof rack railing for NAVIS FLAT PickUp roof rail aluminum black:The matching side rail for the roof rack NAVIS FLAT - suitable for all PickUp models.2 pieces (1x left and 1x right)Color: Black
Prices incl. VAT;
Anti-slip pads for CargoBear
Self-adhesive anti-slip pads Perforated metal sheets, as used on our CargoBear roof racks, on ladders, steps and other climbing aids on vehicles, are much safer than regular metal surfaces. Additional anti-slip pads, however, offer an unbeatable safety advantage, especially in wet or dirty conditions. The anti-slip pads are designed to perfectly match the hole patterns and due to its black color, they also compliment the overall look of our products. The material for the pads originates in the sports sector and has been widely used on skateboards, for example. For the CargoBear, we offer ready-cut, self-adhesive anti-slip pads measuring 16 x 24 cm individually or in sets of 3, 6 or 12. Please note: the multi-packs provide increasing savings regarding the price per item. Since the pads are manufactured with in-house laser cutting technology, we can supply custom formats on request.
Prices incl. VAT;
Awning holder, 2 pieces for Horntools ExRoof roof rack
Awning holder, 2 pieces for Horntools ExRoof roof rack Attaching an awning to our ExRoof roof rack is now even easier! With this awning bracket, you can easily attach your awning to your roof rack. Scope of delivery: 2 piece awning bracket
Prices incl. VAT;
Loading aid roller for Horntools ExRoof roof rack
Loading roller for ExRoof roof bars from Horntools The loading aid makes loading your roof rack child's play. Whether ladders, planks or other long goods, the loading aid simplifies your work. The ExRoof loading aid is attached directly to the ExRoof platform using sliding blocks. Technical data: 40mm loading roller Stainless steel shaft, resistant to scratches & rust Weight: 2kg Powder-coated
Prices incl. VAT;
CargoBear accessory holder for maximum traction
Nakatanenga CargoBear accessory holder for maximum traction Maximum Traction Boards are an extremely lightweight plastic alternative to conventional aluminum sandboards, a must-have for all serious off-roaders and expedition enthusiasts. If you have at least two CargoBear crossbars - or the entire roof rack - on the classic Defender (up to MY2016) or Mercedes G-Class, you can now install a robust and quickly accessible mount for the traction boards with little effort. The mount consists of a bracket set with two of our tried-and-tested CargoBear awning brackets (stainless steel) and special aluminium mounting plates for the traction boards. The awning brackets are simply screwed to the crossbars’ angled sides. All brackets are powder-coated in black. Screws and fastening material (stainless steel) - also for the traction board - are included.
Prices incl. VAT;
CargoBear Mounting brackets for Awnings, black
Nakatanenga CargoBear Mounting brackets for Awnings The CargoBear awning holder allows you to mount numerous awnings on the CargoBear roof rack for Defender and on the CargoBear roof rack for Mercedes G. It is suitable for the following awning models, among others: RoofLodge Awnings RhinoRack Foxwing RhinoRack SunSeeker At least two CargoBear cross bars are required for assembly. The 4-piece set is supplied including the necessary assembly material for attaching the awning holder to the CargoBear roof rack. Fixing material for the awning is not included. The awning holder is made of stainless steel. It can be used on all CargoBear carriers with 30° feet (e.g. Land Rover Defender or Mercedes G). Material: black powder-coated stainless steel Suitable for all CargoBear 1.0 + 2.0 roof racks!
Prices incl. VAT;
Thule Knebelmuttern, abschließbar
Thule toggle nuts, lockable Protect your roof racks from theft! The ideal addition to our Thule racks for Land Rover Defender and Land Rover Discovery 1 / 2 are the lockable toggle nuts.The set contains 4 tommy nuts with keyed alike stainless steel locks and matching keys. The locks are compatible with the Thule One Key System if other Thule products are used.
Prices incl. VAT;
Roof rack padding set for Horntools ExRoof roof rack
Roof rack support set for universal use Quick attachment and removal thanks to Velcro fastening system Made from high-quality, water-repellent materials Ideal for outdoor use Suitable for all commercially available roof rack platforms or crossbars - regardless of brand Can also be fixed at the front and rear with an eyebolt High-quality roof rack pads for unique adventures Made from high-quality materials, our roof rack pads guarantee durability and comfort when travelling. Complete set for comprehensive protection The set includes hard-wearing roof rack pads including eyebolts for fastening, which offer comprehensive protection during transport. The support pads protect your equipment from scratches and dents and ensure safety on every journey. Versatile and comfortable Ideal for transporting your SUP, kayak, skis, canoe or snowboard. Also very suitable for craftsmen, for transporting ladders, wood or other long goods. Technical data: Material: Canvas cover and EPE foam padding Product dimensions: 600 x 85 x 95 mm (L x W x H) Weight: 0.5 kg Scope of delivery: 2 x roof rack supports 4 x eyebolts + fastening components 1 x transport bag Instruction manual
Prices incl. VAT;
Fastening set for AluBoxes on CargoBear 1.0 and 2.0
Fastening set for AluBoxes on Nakatanenga CargoBear 1.0 and 2.0 Probably the easiest and safest way to mount an AluBox on CargoBear 1 or 2: Our customised fastening solution consists of 4 brackets that screw the box base firmly to the roof rack from the inside. This not only serves to secure the box for transport, but also prevents it from being quickly stolen on the road when it is locked. Mounting the brackets is child's play. Apart from the tools, everything you need is included. You can download detailed instructions from our web shop, where you will of course also find a large selection of matching aluminium boxes.
Prices incl. VAT;
CargoBear Awning Bracket for Land Rover New Defender from MY2020 onwards
Nakatanenga CargoBear - Awning holder for New Defender One of the best moments when car camping or at 4x4 meetings is unfolding the roof awning. It means you've arrived and the cozy part is about to begin. Once the awning is up, you can lounge in your camping chair, put your feet up and plan your next activities over a coffee or a cool drink. And since the CargoBear is also available for the New Defender, there is also the option of attaching numerous awnings and awnings. Our awning holders made of black powder-coated stainless steel are screwed onto the slope of at least two crossbars and are suitable for awnings such as the RoofLodge Awning, RhinoRack Foxwing and SunSeeker. The 3-piece set is supplied including the necessary mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included.
Prices incl. VAT;
Handle for CargoBear roof rack system
Handle for Nakatanenga CargoBear roof rack system Do you already have a CargoBear roof rack? Then you have probably used the mounting rail as a handle. This is unpleasant and you can easily hurt yourself - as we know from personal experience.That's why we decided to offer a suitable handle for the Cargobear. They are very useful for little effort - the handle is easy and quick to install. So easy and so ingenious! Dimensions: Length: 300 mm Height: 66 mm Handle diameter: 28 mm Material: aluminum plastic coated RAL9005 Delivery: 1 pc handle 2 pcs slot nut mounting material -Suitable for all CargoBear 1 + 2 roof racks!
Prices incl. VAT;
Mounting kit for all CargoBear system roof racks
The stainless steel mounting kit Is for mounting various brackets on the CargoBear system roof rack or on the Cargobear crossbar - e.g. the CargoBear quick mounting frame is attached with this mounting kit (the mounting kit is already included with the quick mounting frame). The kit consists of 4 stainless steel sliding blocks with matching M8 stainless steel screws. The long screw makes installation easier, as the sliding block can be easily positioned with it (see 2nd and 3rd picture). Dimensions of a sliding block: Length: 65 mm Width: 18.5 mm Height: 6 mm Material: Stainless steel Please note: The CargoBear can generally be fitted to a vehicle with a lifting roof/camping roof, but a few things must be taken into account. Please contact us for more information. Suitable for all CargoBear 1 + 2 roof racks!
Prices incl. VAT;
CargoBear bracket for large auxiliary headlights
Bracket for large auxiliary headlights For driving lamps and Vision-X Cannon, stainless steel, black powder-coated.Delivery without headlights, price per piece.- Suitable for all Nakatanenga CargoBear 1 + 2 roof racks!
Prices incl. VAT;
CargoBear connector for headlight holder
Connecting piece for headlamp holder Can be used laterally or centrally (see technical drawings). Suitable for universal accessories such as light bars.Supplied without side brackets, which are necessary for mounting, and without headlights.The mounting points of a light bar can be up to 400 mm apart in order to be attached to the connector.ATTENTION: The article only fits the Nakatanenga CargoBear Defender 1 + 2!
Prices incl. VAT;
Rubber moulding for ExRoof roof rack
Rubber moulding for ExRoof roof rack The rubber moulding is suitable for every T-slot of the ExRoof roof rack, except for the HEXSLIM model (all-round frame) on the underside. It acts as a wind deflector at the front and thus reduces noise. It also acts as an anti-slip insert on the surface to stow loads such as transport boxes more securely. The rubber moulding must be cut into pieces for installation on the ExRoof in the direction of travel. Technical details: Length: 146 cm
Prices incl. VAT;
CargoBear bracket for additional headlights, headlight bases M8 + M10
Bracket auxiliary headlamp for Nakatanega CargoBear Stainless steel, black powder-coated.Scope of delivery: 1 pc
Prices incl. VAT;
CargoBear Bracket for CB Radio Antenna
Bracket for CB antenna / radio antenna for Nakatanenga CargoBear system roof rack This robust bracket was specially developed for mounting a CB or radio antenna on CargoBear system roof racks. It is made of high-quality stainless steel and is powder-coated in black for additional corrosion protection and an attractive appearance. Ideal for off-road enthusiasts, long-distance travellers or professional use - with this mount you can securely and stably attach your antenna to the vehicle.Product details: Suitable for all CargoBear 1 and 2 roof rack systems Made of rust-free stainless steel Surface: black powder-coated Resistant to weather and mechanical stress Simple and secure attachment Can be used universally for various CB or radio antenna models Scope of delivery:1x antenna holder (without antenna)Note:The delivery does not include the antenna. The indicated price refers to one piece.
Prices incl. VAT;
Cover profile for Cargobear 30 mm wide, cut to size, set with 6 cuts
More grip, less risk - rubber cover profiles for the Nakatanenga CargoBear How do you improve the CargoBear? By clicking our rubber covers into fully or partially unused lashing openings in the rack. With our 30 mm wide and 10 cm long strips, you can quickly and securely seal the gaps. The rubber covers give you a whole range of noticeable advantages. Firstly, they improve load safety on the already very slip resistant CargoBear even further. When you position the cargo on top of the rubber strips, the ribbed surface structure prevents the lashed down cargo from sliding. A second effect is created by the rubbers’ added height of 3.5 mm, which lifts the cargo off the actual rack, preventing scratching or damages to both. And last but not least, the covers also prevent vegetation from getting trapped or stuck in the sideways rails when off-roading. The covers sport rounded edges for a better fit. The rubber cover strips for the CargoBear can be ordered in sets of 6 or 24 respectively. One crossbar requires a set of 6 for Defender, Jimny or G-Class. A set of 24 covers one cargo panel with the above-mentioned 4x4s, i.e. the minimum configuration of 2 cross bars and one panel requires 2 sets of 6 and one set of 24. If you have any questions, don’t hesitate to get in touch.
Prices incl. VAT;
Trekfinder cover profile for airline rails
The perfect addition: cover profile for your airline rail Available in: 1 m or 10 cm steps (free choice of length) - max. 25m in one piece Please note:Since there are so many different possible uses and we do not know your requirements, we need the information from you about the length and denomination of the profiles you need. Please enter this in the free field at the end of the ordering process. One thing is certain: airline lashing rails would have to be invented if they didn’t exist already. Few systems for securing cargo are simultaneously as flexible, robust and safe. If you ever had to tie down large, unwieldy or sensitive objects in your cargo hold or on the roof rack, you’ll know what we mean. So how do you actually improve lashing rails? By clicking rubber covers by Trekfinder into unused tracks. A simple, fast and secure solution. The rubber strips add little height with 3.5 mm and prevent dirt and dust from clogging fully or partially unused rails. This is particularly important in cargo holds or on open trailers, because dirt clogged rails make it harder to attach fittings and studs. The same goes for winter weather when snow and ice can render exposed rails next to useless. The rubber strips feature a ribbed surface to improve load safety. Loads that are positioned on top of the rubbers won’t slip or slide as easily. On roof racks, wind noises are being reduced and if you have mounted airline rails sideways on the rack or the vehicle itself, the rubbers prevent vegetation from getting trapped when off-roading. That’s a lot of bang for your buck. The rubber covers can be ordered in widths of 23 mm or 30 mm
Prices incl. VAT;
Roof Racks – Extra Storage and Flexibility for Your Off-Road Adventures
A high-quality roof rack is an essential accessory for any off-road vehicle. It provides additional storage space, enables safe equipment transport, and expands your adventure possibilities in rugged terrain. Whether for tents, spare tires, fuel cans, or tools – roof racks create space so you can start every expedition fully equipped. Our off-road shop offers the CargoBear roof rack system, a rugged, German-made solution specifically designed for demanding off-road use.
Why Roof Racks Are Essential for Off-Road Vehicles
Off-roaders often need more storage than a vehicle’s interior can provide. Roof racks offer the perfect solution:
-
Extra Storage Capacity: Utilize your vehicle’s roof space for bulky or heavy gear
-
Versatile Applications: Ideal for transporting rooftop tents, fuel cans, bikes, skis, spare tires, and more
-
Durability & Stability: Built to handle heavy loads and tough conditions
-
Secure Transport: With proper accessories like straps or mounts, your gear stays put even on rough terrain
-
Expandability: CargoBear racks allow integration of light bars, awnings, or rooftop tents
Our Roof Rack Selection
We offer racks tailored to different vehicles and needs:
-
Modular Systems: Customizable designs for flexible setups
-
Vehicle-Specific Racks: Precision-fit for easy installation and optimal stability
-
Universal Racks: Compatible with most vehicle types
-
Low-Profile Platforms: Stable bases for large loads or tents
-
Heavy-Duty Racks: Engineered for heavy equipment like fuel cans or spare tires
Premium Features of Our Roof Racks
-
Durable Materials: Aluminium construction for strength and corrosion resistance
-
Aerodynamic Design: Reduces wind noise and improves efficiency
-
Easy Installation: Many models mount without vehicle damage
-
High Load Capacity: Safely supports heavy gear on challenging trips
-
Accessory Compatibility: CargoBear racks work with lighting systems, quick-mount tent rails, and storage boxes
Selection & Usage Tips
-
Check weight limits to ensure safe cargo capacity
-
Verify vehicle compatibility before purchase
-
Centre heavy items and secure them properly
-
Inspect bolts and connections regularly
-
Enhance functionality with accessories like mounts or awnings
Expert Advice
Our team will help you choose the perfect roof rack and provide installation guidance.
Pro Tip: A roof rack isn’t just extra storage – it’s vital for overlanding and remote expeditions.
Equip your vehicle with a reliable roof rack today for maximum versatility on every adventure!