Thermo tent liner for Roof Lodge Evolution2 140 and 165 roof tent
Cozy, Warm, and Dry – Your Upgrade for Cool Nights in the Roof Lodge Evolution 2! Do you love adventuring with your Roof Lodge Evolution 2 roof tent but don't want to sacrifice comfort in cooler temperatures or on damp nights? Then our thermo inner tent is just the thing for you! More Warmth, Less Condensation – It's That Simple: The principle is as simple as it is ingenious: just like with proven outdoor clothing, we rely on the layering principle. The additional inner tent creates an insulating air layer and noticeably improves the climate inside your roof tent. Pleasant Warmth: The quilted three-layer material, with polyester fibers on the outside and thermal fleece on the inside, retains heat much more effectively in the tent. This makes even cold nights comfortably warm. Reduced Condensation: The extra layer helps to minimize the formation of condensation inside your roof tent, ensuring a more pleasant and drier sleeping environment. Easy Installation: The inner tent is a perfect fit for your Roof Lodge Evolution 2 (available for widths 140cm and 165cm) and can be easily attached to the tent poles with clips and to the mattress with straps. Practical Details: The ventilation openings of the inner tent are aligned with the windows of the outer tent and, together with the robust YKK zippers, ensure good ventilation options. Additional Sound Insulation: As a pleasant side effect, the material also dampens external noise, ensuring a quieter night. Convenient: Your roof tent can be closed even with the thermo inner tent attached. Make your Roof Lodge Evolution 2 even cozier with the thermo inner tent and extend your camping season! Get your upgrade now for maximum sleeping comfort, no matter where your next adventure takes you. Note: The thermo inner tent is washable at 30°C on a gentle cycle. Is the Nakatanenga thermal inner tent for Evolution 2 compatible with other roof tents? The answer to this question can only be a resounding yes and no: As you can clearly see, there are areas where the inner tent is slightly too large and there are areas where it is a little too short. This leads to it being raised at the sides and sagging slightly on the longitudinal axis. The fit is therefore not optimal for tents from other manufacturers, but we are talking about deviations in the order of just under 3cm (depending on the actual height of the poles). To avoid any misunderstandings: The thermal inner tent does NOT have a floor, even if the above illustration might give this impression. However, it is fixed with elasticated straps under the corners of the mattress.
Prices incl. VAT;
Tool Roll MINI - Hungry Edition - incl cutlery
Tool Roll Hungry Mini - now also with WMF chef's knife - FREE! With this additional chef's knife, all common cutting tasks can be carried out effortlessly: The larger chef's knife is ideal for slicing and chopping solid ingredients, while the smaller preparation knife is perfect for finer work. Both knives impress with their long-lasting sharpness and hardened blades made of stainless, acid-resistant special steel, which is also coated. The ergonomically shaped handles fit perfectly in the hand and offer a secure grip. Thanks to the practical protective blade covers, the knives can be stored safely and space-savingly in the cutlery drawer. Tool Roll Hungry Edition, incl. Camping Cutlery The Defender represents English cultural heritage, just like a scrumptious picnic with cucumber sandwiches and Scotch Eggs. At Nakatanenga we thought, that’s not just a very good combination on a country estate in Somerset, but anywhere, really, where the Great Outdoors meets fine dining. And that’s why we’ve equipped our tried and tested Tool Roll with exquisite cutlery: et voilà, the Tool Roll Hungry Edition was born, available in Mini, Maxi and Titan! Instead of the usual camping sets with tin bowls, plastic sporks and aluminium knives, we offer stainless steel cutlery in the Tool Roll Hungry Edition Mini and Maxi as well as high-quality WMF cutting knives with heat-resistant and ergonomically shaped plastic handles. The Mini-set is designed for four people and the Maxi Edition for six, with a chopping board and a four-piece cooking spoon set made from durable bamboo. If you have to watch the weight of your equipment or you’re generally fascinated by great materials, the Tool Roll Hungry Mini Titan is the one for you. Being harder than steel, titanium allows for extremely thin manufacture of cutlery, plates, mugs and so forth while maintaining incredible robustness and durability. As a result, titanium utensils are generally even lighter than their aluminium equivalents, while providing all the health-related and hygienic advantages of stainless steel. The titanium fork and spoon sets can also be purchased separately. Whether you go for stainless steel or titanium, everything fits neatly into the space-saving roll-up bags made of durable nylon. Carrying strap and loops on the underside of the Maxi-Roll expand transport and combination options. And of course, the 12 pocket slots still provide space for other essential items. Can opener, corkscrew or maybe just the lobster tongs? No matter how you roll food-wise, whether it’s hot dogs or Foie Gras for you, the Tool Roll Hungry Edition is an unbeatably practical piece "Home from Home" for campers, off-roaders and foodies. Scope of delivery Tool Roll Mini Hungry: 1x Tool Roll MINI4x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)4x fork (dishwasher safe)4x big spoon (dishwasher safe)4x coffee / teaspoon (dishwasher safe) Scope of delivery Tool Roll Mini Hungry Titan: 1x Tool Roll MINI6x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)6x fork titan (dishwasher safe)6x spoon titan (dishwasher safe) Scope of delivery Tool Roll Maxi Hungry: 1x Tool Roll MAXI6x knife (dishwasher safe)1x WMF utility knife (Not suitable for dishwashers)1x WMF chef's knife (Not suitable for dishwashers)6x fork (dishwasher safe)6x big spoon (dishwasher safe)6x coffee / teaspoon (dishwasher safe)1x 4-piece bamboo cooking spoon set (dishwasher safe)1x bamboo cutting board (Not suitable for dishwashers) MADE IN EU And by the way: At Nakatanenga, we only use materials with 100% nylon PU coating for all textile articles. Nylon PU (polyurethanes) is, unlike PVC, free from harmful phthalate-based plasticizers. Low molecular weight phthalates were until recently the most common plasticizers for plastics of all kinds, and are even used in food and cosmetics. However, they accumulate in the environment and are due to their molecular nature suspected of acting as the body's own hormones. This is toxicologically highly questionable and is considered the trigger for various diseases, including cancer. For Nakatanenga, it goes without saying that when it comes to coating textile products, it is only possible to use environmentally friendly and harmless alternatives such as nylon PU.
Prices incl. VAT;
Side and front walls for Nakatanenga Awning
Practical Side Extension for Nakatanenga Awnings Please note: The front panels are only suitable for 250 cm wide awnings. The front sections are crammed into the top of the awning and attached to the side of the pole poles (see pictures). The side panels are attached to the horizontal aluminium poles at the top and to the pole poles at the side. The side panels are suitable for all awning widths. We offer the side panels in pairs, the front panels individually. This practical extension for our awnings is ideal for travel and holidays and offers ideal protection from the sun, evening cold, rain and wind. It significantly increases the utility value of the Nakatanenga awning. The fabric is made of sturdy RipStop nylon (600den, with PU coating) and is therefore largely safe from mould and mildew stains. Nevertheless, a damp awning or the side walls should be dried after 2-3 days. These individual walls have been deliberately designed without additional windows and doors. Since the individual elements can be braced like tarps, openings in the surface would mean that the wind would push the rain under the opening covers and thus the areas underneath could not be used. Colour: Oxide Please select the desired version.
Prices incl. VAT;
Nakatanenga Spare Wheel Bag
Nakatanenga spare tire backpack If you are occasionally "out at home", be it offroading, survival adventures or expeditions, you know the feeling when dust, dirt and moisture slowly but surely penetrate into the innermost areas: into the sleeping bag, in the spare linen, in the food, in the tool. There, where you just want to have it dry and clean, because otherwise it quickly starts to gnaw on morality. The rule of thumb is therefore, no matter whether backpack, tent or 4x4: dirty things stay together, well packed and especially OUTSIDE. Our Nakatanenga spare tire backpack with about 80 l volume realizes this principle for your 4x4. Firewood, muddy slings, wet clothes or tarpaulins, garbage, game loot and much more are stored outside on the spare tire, on the tailgate or on the roll bar. This ensures that the interior of the car and the rest of the equipment are guaranteed to remain clean. If the additional storage space is no longer needed, the spare tire backpack is quickly cleaned, folded and packed away. The 80 l backpack developed according to US MIL-SPEC is attached non-slip with two straps. It is freely expandable by double-sided MOLLE, e.g. with our first aid kit. Trivia is best kept in the zip pocket on top and meshes at the bottom allow water and dirt to drain off quickly. The bag is made of sturdy polyamide 6.6 and is internally PU-coated, odorless and without plasticizer. The spare tire backpack is ideal extra storage space with a large footprint. Especially with smaller 4x4s that is very valuable. If 80 l are too much you should take a look at the medium version with 47 l. Delivery is without the illustrated accessories. Material: Polyamide 6.6 with PU coatingCapacity: about 80 litersDimensions: HxWxD ca. 66x525x210 mm
Prices incl. VAT;
Side panel for Nakatanenga Evolution2 Awning, stone grey
Side panel for Nakatanenga Evolution2 Awning Roof-mounted car awnings like our EVO II are a great pieces of equipment if you want to turn your 4x4 or van into a quickly set up mobile camp. But proper protection from wind, weather, sun and unwanted attention comes only with the addition of side walls. Conditions vary from location to location and even throughout a single day: the sun is moving from east to west and the wind is changing directions, too. By the sea, it becomes a lot stronger in the evenings and carries dust, sand and the occasional shower. But aside from weather protection, the side tarps also create valuable privacy in crowded camp grounds and other popular locations. Our side walls come in pairs and are the best solution for all these challenges. Simply stick the velcro fasteners to the roof awning’s frame and fasten the tarps to the ground using the four included tent pegs. All of that is simply a question of minutes and if the wind, the sun or a new location demand a change in position you can easily swap the sidewalls to accommodate the situation. The two side wall tarps are made from high quality PU-coated RipStop polycotton, a blended fabric containing 65% polyester and 35% cotton. This highly functional material is extremely resistant to tearing, it is water and dirt repellent and due to its high specific weight of 280 g/ m2 the material will make less noise in the wind. The tarp’s inner side features a layer of aluminum to assist in regulating temperature and to diffuse and amplify low intensity light sources like candles, camping lanterns etc. Color:Stone gray. Dimensions:Width 2 m, height 1.95 m Scope of delivery: 2 x side wall tarp4 x tent pegs Material:PU-coated RipStop polycotto
Prices incl. VAT;
Nakatanenga Flat-top Nakatanenga grill plateGrill - Muurinpohjapannu
Practical Nakatanenga grill plate With this grill plate you can enjoy a barbecue 2.0. The usual barbecue feeling with the bonus that you can prepare far more dishes from now on. In principle, every pan dish can be prepared - no matter where you are, in the mountains, in the desert or at the campsite. This is our popular Muurinpohjapannu with upgrade. Basically, Muurinpohjapannu always includes 3 bolt-on steel feet. The steel feet are suitable for cooking on an open fire. However, since you can not grill everywhere with wood and may this grill plate is supplied with 3 additional screw-on feet made of aluminum. With these feet, the plate can also be operated with a gas cooker. For this purpose, the delivery includes mounting clamps for the stove and a windscreen. The aluminum feet are adjustable in two different sizes. The "longer" feet are also a comfortable grilling while standing allows. With the aid of the three fixing clamp, the gas cooker can be fixed to the plate and the windbreak ensures that the gas flame is always well protected. Any commercially available 3-leaf cooker can be used. The grill plate is available in different versions. Please select the desired variant. Variant: grill plate with burner, gas and wind protectionis included in the scope of delivery:- Grill plate- burner- gas cartridge- windbreak, incl. fastening clamps- Aluminium feetVariant: grill plate with windbreakis included in the scope of delivery:- Grill plate- Windbreak, incl. fastening clamps- Feet made of aluminiumVariant: Aluminium feet with windbreak, gas and burneris included in the scope of delivery:- Feet made of aluminium- gas- burner- windbreakThis version is ideal as a supplementary set for all those who already own the grill plate alone and now want to use it with gas!Variant: aluminium feet and windbreakis included in the scope of delivery:- Aluminium feet- Windscreen (incl. fastening clamps)This variant is ideal for those who already own the grill plate, burners and gas!
Prices incl. VAT;
Roof Lodge awning small, for Basic roof tent
Roof Lodge awning small, for Basic roof tent Awning for Roof Lodge Basic roof tents, made of hard-wearing, PU-coated RipStop nylon, available in various widths and colours.The awning is quickly and easily attached to the keder rail and provides additional wind, rain, privacy and mosquito protection. It is made of the same material as the roof tent itself: PU coated nylon with 600den.The awnings are also available in another version (2nd version) - here the side sections can be rolled up and erected as canopies using optionally available telescopic poles.We offer the awnings in three colour variations: Reed green (approx. RAL 6013), sand colour (approx. RAL 1002) and oxide red. It is also available in two widths - suitable for our 165 cm roof tents. Please select the desired colour below.The awnings were designed for our old ROOF LODGE roof tents, but are also suitable for other roof tents with 4 keder rails and comparable construction (e.g. our new ROOF LODGE EVOLUTION roof tents, Front Feather roof tents and roof tents of the Horntools brand).You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far we have found the perfect solution for almost every vehicle.Simply contact us at: +49 9181 466 644
Prices incl. VAT;
RuumX Subdivision system for aluminium box
Subdivision system / protective foam for aluminium box Nothing beats aluminum boxes, especially the ones by Danish outfitter Alubox.com, when it comes to transporting or storing gear and equipment. They are light, sturdy and resistant to corrosion, chemicals and many other environmental influences. How can you improve an aluminum box? By adding an interior structure for more organization and safety. That’s why Alubox.com have come up with their RuumX solution, a customizable system of padded layers walls, dividers and protective “egg crate” foam. Whether it’s dishes, tools or electronic equipment, the protective divider system makes transport and storage in aluminum boxes significantly safer and more organized. RuumX also allows for very specific customization. The set consists of two self-adhesive foam-pads for the bottom and the inside of the lid, two perfectly fitting side wall elements with rounded corners as well as five dividers, which can be cut to the desired lengths. All walls and dividers are made from corrugated plastic panels with foam layers on both sides. These sandwich panels are lightweight yet extremely robust. The cells or slots in the panels are also used to firmly attach different elements to each other, using the steel pins included in the delivery. RuumX kits come in two varieties, differing only in the height of walls and dividers. The lower version has a height of 14.5 cm and fits the Aluboxes A042 and S060, the higher one can be used for both S060 and A073 and has a height of 19.5 cm. Please noteEgg crate foam for the inside of the lid can be ordered ctseparately to prote sensitive equipment even better.
Prices incl. VAT;
Lid for TRANSFORMER box made of wood including metal feet
Wood lids with and without metal feet Robust, weather-resistant and easy-to-clean wood lids transform the 25, 48 and 90 litre Transformer folding crates into practical tables for mobile use, camping, the workshop or any other place where the Transformer Crates are used. There are also new table legs made of high-quality stainless steel. They are stable, rustproof and perfectly designed for durability. They also take up little space in the Transformer folding crate when folded. Thanks to the special holder, the legs are securely locked when folded and remain in place, no matter where the journey takes you. This space-saving feature allows for efficient storage without losing valuable space. This versatility allows the tables to be used in a wide variety of spaces and for different purposes. The stainless steel construction also allows for the maximum height of the legs, which can be stored diagonally in the box. As stainless steel remains rust-free even without a coating, it retains its timeless design for many years. Lid dimensions: for 25L: L39.5 x W29.5 x H1.5cm for 48L: L54.0 x W36.0 x H1.5cm - including feet H 34.0cm for 90L: L73.0 x W42.0 x H1.5cm - including feet H 57.5cm The metal feet are already fitted by us in the value bundle. Metal feet in a set of 4, including template and matching screws, are available HERE in the store! The Transformer folding boxes from Outstandards are available in the colours: 25 litre capacity: Ivory or Grey 48 litre volume: Ivory, black or olive 90 litre volume: black or olive Additional accessories can be ordered separately: Hand trolley: for 48 litre box Rubber straps: for 48 litre box, 90 litre box
Prices incl. VAT;
Side panel for Nakatanenga 270° degree awning stone grey, 1 pair
Additional side panels for Nakatanenga 270° degree awning stone grey, 1 pair The Nakatanenga Evolution 270° roof awning transforms any Defender, T5 & Co into a practical, flexible and, above all, quickly opened camp in an instant. On expedition, on holiday or just for an afternoon at the lake. The basic version of the roof awning comes with two side panels. If you want to turn the awning into an enclosed storage area that is protected on all sides, you can order the two additional side sections here. Like the side walls already included with the awning, the two additional tarpaulins are made of high-quality, PU-coated RipStop polycotton, a blend of 65% polyester and 35% cotton. The functional fabric is extremely tear-resistant, water- and dirt-repellent and, due to its relatively high weight of 280 g/m2 , it also produces significantly less fluttering noise in the wind. It is aluminium-coated on the inside. This helps regulate heat and also ensures pleasant and effective use of existing light sources due to the diffusing reflection. The side tarpaulins are attached to the poles as required and can be lashed together. This means that when the awning is completely closed, there is hardly any surface for wind and weather to attack
Content: 2 Piece (€74.50 / 1 Piece)
Prices incl. VAT;
RoofLodge Ladder
Telescopic ladder for ROOFLODGE EVOLUTION roof tent - spare part, up to 2.15 m long Product information Ladder can be used as a spare part for our ROOFLODGE EVOLUTION folding tents. Rung width: 30 cmLadder dimensions: retracted 1.2 m / extended 2.15 m Here you will find a matching ladder extension - for up to a further 45 cm.Please note that for older Roof Lodge Evolution folding tent models, the ladder bracket must be remounted on the base plate of the roof tent.
Prices incl. VAT;
Bundle: pioneer pick, trekking folding saw, trekking axe (38cm) and storage bag
Trekking bundle including storage bag Some tools are indispensable when you want to set up a proper camp while on holiday, off-roading or on expedition. For tough jobs like digging or wood work, you want high quality tools in your basic equipment. Our compact tool bundle in the practical roll-up bag features a Swiss military pickaxe as well as an all-purpose hatchet and a Japanese-style pruning saw, both by Bellota. The military pickaxe with its forged pick and the flat head is ideal for quick digs around the camp: making a firepit, digging drains, removing rocks from the tent area and a lot of other jobs. The all-purpose hatchet by Spanish Manufacturer Bellota is made in the Biscayne trade axe style, a traditional and very ergonomic design. Making kindling or firewood, delimbing trees or removing underbrush from your camp – no problem for the Bellota. And when you need precision in your wood working tasks, you can always rely on the foldable Japanese pruning saw with its extremely sharp blade. It adds exactness and speed to all sorts of jobs around the camp site, e.g. cutting poles for shelter or tripods and so forth. The Nylon roll-up bag for your tools features extra-strong seams and is as sturdy as it is easy to clean – providing neat and safe storage for your basic camp site kit. The tool roll features strong straps to tighten the bundle as well as carrying handles and fastening slings for safe and compact transport. And by the way: with an overall weight of only 2.5 kg approximately and packing dimensions of 58 x 15cm, this tool-set will fit anywhere.
Prices incl. VAT;
Montage Dachzelt, wahlweise ohne oder mit Einweisung
Montagepauschale für die Nakatanenga Roof Lodge Dachzelte in unserem Hause. Wahlweise mit oder ohne Einweisung (wählen Sie bei der Bestellung bitte die passende Variante aus) Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.
Prices incl. VAT;
Mosquito net as awning for Nakatanenga Awning
Mosquito net as awning for Nakatanenga Awning (or other awnings with the same dimensions) This mosquito net, which is exactly adapted to the dimensions of the Nakatanenga Awning, serves as a pleasant protection against annoying - and possibly also dangerous - mosquitoes. If you close all four outer sides, the mosquito net allows you to comfortably "sit outside" without restricting the air circulation - and the pests have to stay outside! Not only useful in the tropics, Scandinavian holidays in summer are also much more pleasant with fewer mosquito bites. The mosquito net has a ceiling surface that is connected to the 4 side panels without gaps. With this mosquito net awning you stay free of bites & itches and thus ensure a pleasant holiday feeling!
Prices incl. VAT;
Nakatanenga Spare Wheel Bag / Transport Bag - medium - Black
Nakatanenga spare tire backpack If you are occasionally "out at home", be it offroading, survival adventures or expeditions, you know the feeling when dust, dirt and moisture slowly but surely penetrate into the innermost areas: into the sleeping bag, in the spare linen, in the food, in the tool. There, where you just want to have it dry and clean, because otherwise it quickly starts to gnaw on morality. The rule of thumb is therefore, no matter whether backpack, tent or 4x4: dirty things stay together, well packed and especially OUTSIDE. Our Nakatanenga spare tire backpack with about 47 l volume realizes this principle for your 4x4. Firewood, muddy slings, wet clothes or tarpaulins, garbage, game loot and much more are stored outside on the spare tire, on the tailgate or on the roll bar. This ensures that the interior of the car and the rest of the equipment are guaranteed to remain clean. If the additional storage space is no longer needed, the spare tire backpack is quickly cleaned, folded and packed away. The 47 l backpack developed according to US MIL-SPEC is attached non-slip with two straps. It is freely expandable by double-sided MOLLE, e.g. with our first aid kit. Trivia is best kept in the zip pocket on top and meshes at the bottom allow water and dirt to drain off quickly. The bag is made of sturdy polyamide 6.6 and is internally PU-coated, odorless and without plasticizer.The Medium spare wheel rucksack with a packing volume of approx. 47 l is ideal for tyres up to 37". If that's not enough, you can take a look at its big brother with 80 litres here. Delivery is without the illustrated accessories. Material: Polyamide 6.6 with PU coatingCapacity: about 47 litersDimensions: HxWxD appx. 525x425x210 mm
Prices incl. VAT;
Foldable camping table, height-adjustable from 45 to 60 cm, black
Foldable camping table from Horntools Large storage surface: Despite its compact size, the table surprises with a generous surface area. Perfect for cooking, picnics or storing accessories. Foldable with roll-up design: The camping table frame is foldable and the table top can be effortlessly rolled up in seconds and stored in the compact carry bag provided. Adjustable height: At the simple touch of a button, the table legs can be adjusted in height and moved up and down between 40 and 65 cm. Easy to clean: The aluminium tabletop is easy to clean, making post-camping clean-up a breeze. Spend less time on maintenance and more time in nature. Portable and lightweight: With its light weight, this portable camping table is perfect for those who like lightweight equipment without sacrificing performance. Simply take it with you wherever your adventure takes you. Technical details: Size assembled (L x W x H): 89 x 60 x (adjustable between 40-65 cm) Pack size (L x W x H): 28 x 11 x 91 cm Weight: 4.8 kg Table material: Powder-coated aluminium, matt black Material bag: 300D Oxford with PVC coating Scope of delivery: 1 x aluminium table (matt black) 1 x carrying bag (black)
Prices incl. VAT;
Wall bracket for bicycle
Space-saving wall-mounted bike rack A practical storage facility and at the same time a real design highlight? This wall mount for racers, mountain bikes or children's bicycles is both. Intelligently shaped, the plastic body, available in dark gray or orange, holds the bike elegantly in its place and offers additional space for helmets, shoes or other cycling accessories. Whether in a shed, a garage, or a trendy loft, storing your bike and accessories in this mount is easy, space-saving and an aesthetic delight. The bike mount measures approx. 50 x 45 cm and weighs 3.6 kg, it comes with wall brackets and four bolt anchors for masonry. For walls made of wood or other materials, please chose suitable fastening materials. This molded plastic bike mount is designed for light sports or leisure bikes and is NOT suitable for heavy e-bikes. Material: Durable molded plastic with powder-coated metal back plate Colors: Dark gray, orange Dimensions: 50 x 45 cm Weight: 3.6 kg
Prices incl. VAT;
Plastic water can with spout tap 40L
High quality plastic water cans with 40 liters capacity These plastic water cans are predestined to be transported (e.g., on a roof rack, in the boot, etc.) of fresh drinking water. They are now available with a new, standardized screw cap and spout in standard DIN format. Information about the canisters: 40 liter plastic water can: Dimensions: 460x335x335 mmPolyethylene (BPA-free / food grade)Scope of supply: 40 liter water canisters made of plastic and hose with spigot You can find a replacement twist cap here. The cap has a diameter of ø 60 mm since May 2022Previously the diameter was ø 50 mm
Prices incl. VAT;
Set of 4 feet for Transformer wooden lid 48L and 90L
Function stacking is the key to well-designed camping gear and that means several functions are assigned to one piece of equipment. If you already own one of our practical Transformer folding boxes and a wooden lid, you can now turn said lids into sturdy little tables with minimal effort and without taking up any additional storage space. This dual function turns a box set into a mobile dining area in no time at all. The foldable stainless steel table legs from KoMA.land comply with European standard: i.e. when they are screwed onto the lid of a Transformer folding box, lid and legs fit perfectly into the box when folded in. There’s nothing lying around, nothing has to be stowed away separately and your ancient folding table with the wobbly legs can finally be thrown away. Robust mechanisms in the joints ensure that the legs are securely locked in place when on the move. By the way, the legs are made of high-quality stainless steel, which maximizes both the service life and the set-up height. Table legs are available in sizes L and M, perfectly corresponding to the lids of the 90L and 48L Transformer box respectively. The legs can also be screwed onto any other lightweight camping table top and are compatible with other Euronorm standard boxes. Leg length size M: 32cm Leg length size L: 55cm Available in a set of 4. Wood screws are included.Benefit bundle: Wooden lid with pre-assembled metal feet available HERE in the store
Prices incl. VAT;
ARMYTEK VIKING PRO XHP50
VIKING PRO XHP50 by ARMYTEK This light belongs in every hunter's backpack. Solid housing with 1" standard housing diameter, fits most underbarrel mounts. It is a powerful and robust tactical torch with all-round light pattern. Additional accessories, such as colour filters and cable remotes, have been designed to allow the torch to be used in a wide range of conditions. - Luminosity up to 1,800 OTF lumens.- Light range up to 370 m.- Up to 200 days runtime with a 18650 Li-Ion battery. Light and Optics Colour temperature: White Maximum output (LED lumen): 2,300 lm LED : XHP50 Optics : Smooth reflector (SMO) Maximum output (OTF lumens): 1,800 lm Light range, metre: 286 m Central field of light: 10 Lateral spread: 80° Operating modes: Number of modes: 9 Running time in highest light level: 1h Running time in lowest light level: 200 days Dimensions and weight Head diameter: 25.4 mm Case diameter: 41 mm Length: 154 mm Weight (without battery): 126 g Housing Max. Immersion depth: 50 m Max. Drop height: 30 m Working range: -25..+40 °C ElectronicsCompatibility with power sources: 1x18650 Li-Ion / 2x18350 Li-Ion / 2xR123 Li-Ion / 2xCR123A Protection against accidental switch-on Coloured battery level indicator Low charge indicator Scope of delivery: Holster with belt loop Carrying clip Hand strap Compat ring made of rubber Spare cap for switch 2 spare sealing rings Operating instructions Battery not included in delivery! (2x18350 Li-Ion available here in the shop) Application noteFor further application information please refer to the product data sheet Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
3D mesh mattress base
No More Dampness, Hello Sleeping Comfort – Your 3D Mesh Mattress Underlay! You might know the feeling: despite good ventilation, moisture forms under the mattress in your roof tent, camper, or on your yacht. This is not only unpleasant but can also lead to mildew stains or mold. But that's over now! Our 3D Mesh Mattress Underlay is the clever solution for a dry and healthy sleeping climate. Like an Invisible Air Conditioner for Your Mattress: The secret lies in the special structure of the 3D fabric, also known as spacer fabric. Imagine around one million tiny, upright polyester threads per square meter forming a 10 mm thick, air-permeable layer under your mattress. Optimal Ventilation: This structure allows continuous air circulation. Moisture created by sweating or ambient air can escape ideally before it accumulates and causes problems. More Sleeping Comfort: The 3D Mesh not only regulates moisture but also relieves pressure. It adapts to the contours of your body and ensures excellent load distribution. The result: you lie more comfortably and sleep more restfully – almost as if on clouds! Robust and Adaptable: Made from 100% polyester, the underlay is durable and hard-wearing. If necessary, you can easily cut it to your individual dimensions with a good pair of household scissors. For our Roof Lodge roof tents (140 cm and 165 cm wide) and similarly wide models, it is already perfectly sized at 230 cm long and features practical cutouts for the tent poles. Simply Place Underneath, Sleep Better: Using it is incredibly simple: place the 3D Mesh Mattress Underlay directly between your mattress and the tent floor or sleeping surface. You'll immediately benefit from improved ventilation and a noticeably more comfortable lying sensation. Get your 3D Mesh Mattress Underlay now and ensure a permanently dry, hygienic, and comfortable sleeping experience on all your adventures! Material: 100% Polyester
Prices incl. VAT;
TRANSFORMER Transport Cart, for 48L Box
Transport Cart for Transformer Boxes Collapsible plastic crates, like the ones people have in their trunks when shopping, are really practical even if they tend to be not very robust. But what if you made them so rugged, versatile and cleverly designed that they meet the standards for heavy duty jobs, expeditions or even military missions? That's exactly what tactical outfitter Outstandards from Virginia thought and that’s how the fantastic Transformer Crates with 48 or 90 liters volume and an astonishing load capacity of 200 kg were born. With such a heavy load, a transport cart is almost indispensable. Outstandards also offer the perfect solution on four wheels for the 48l crate. The ultra-flat hand cart has a telescopic handle that can be tilted and stowed away, lockable wheels and, of course, the robust loading platform with interlocking latches. The hand cart is ideal for 2 to 3 stacked boxes, with the total weight of the load not exceeding 150 kg (approx.). The Transformer folding boxes from Outstandards are available in different colours: 25 litre volume: Ivory and Grey 48 litre volume: Ivory, Black and Olive 90 litre volume: Black and Olive Additional accessories can be ordered separately Cooling bag: for 48l box Rubber straps: for 48l, 90l box Wooden lid: for 25l, 48l, 90l box Plastic lid: for 25l, 48l box <iframe width="560" height="315" src="https://www.youtube.com/embed/N90Tlp5JatI?si=ZUIVcUGBeNgEju4S" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>
Prices incl. VAT;
Tool Roll Spice incl spice container
With the Nakatanenga Tool Roll SPICE you give your life more spice! In hardly a vehicle, a spice rack is installed or room for one. But as a true outdoor fan, of course, outdoor cooking is also possible.With our spice bag you have all common spices always practically packaged. And there is still free space to fill his absolute favourite spices / herbs.Thanks to the oversized shape, cooking is even more fun! Use the Tool Roll Spice rolled out, standing or hanging. All spices are always perfectly at hand. The spice tubes can be quickly and easily removed from the rubber holder and put back in after use.Of course, not only spices but also herbs and teas can be stored in the containers. Everything with which one likes to refine his food. You can also use the tubes for vinegar and oil or ready mixes.On the lid of the tool roll spice a transparent pocket is incorporated, in which, for example. Can create an overview list of the spices.The Tool Roll can of course be used in any kitchen, but it is definitely the ideal companion for those who cook in unusual places, such as Off-roaders, campers, anglers, surfers, truckers, barbecues, etc.Delivery:1x base plate14x spice containers without contents (60 ml each) 2x suction cupsNote: Replacement spice containers can be reordered as a pack of 10 here. No more decanting when trying out new spice varieties.You can find the version with 7 spice containers here.Dimensions:Plate open: 45x30 cmfolded: 30x14x6 cmSpice up your lifePlease note:The PETlings are NOT dishwasher safe! Please rinse by hand after use.
Prices incl. VAT;
Tool Roll Spice 2, incl. 7 spice containers
Spice Up Your Life – with our Tool Roll Spice 2! Who remembers the olden days when all you got around the campfire was skewered hot dogs and marshmallow s’mores? Well, those days are gone and good riddance. Today’s campers, be they male or female, working a BBQ grill or a Dutch oven, would be completely lost without a pinch of hand-plucked tarragon for the chicken, argentine dry-rub on the steak or oak-smoked Pimentón de la Vera in a vegan chilli. As we said before, who wants to go back to hot dogs and s’mores? So what’s different from our original Tool Roll Spice? The brand-new Spice 2 measures 45 x 30 cm when opened and offers not only space for 7 included spice and herb containers but also safe, clean and practical storage for other essential cooking utensils. Two mesh-pockets will stow your cutlery, knives, garlic press, condiment tubes and much more. Other than that, our hot roll is just as easily rolled up, unrolled, carried or hung from a hook as its predecessor. The sturdy and easy-to-clean materials, the hand-sewn seams and the strong nylon straps with the snap-lock buckles take care of that. The Spice 2’s airy mesh pockets are opened and closed by YKK quality zippers. They can take spills and leakages and are as easily washed as they are quick to dry. The Tool Roll Spice 2 is your perfect culinary companion for a camping trip alone, with a mate or a date, in your backpack, on your bicycle, the bike or the 4x4. Includes:1 x base plate with two mesh pockets7 x PET containers without content (60 ml)2x suction cups Note: Replacement spice containers can be reordered as a pack of 10 here. No more decanting when trying out new spice varieties.You can find the Tool Roll Spice with 14 spice containers here. Dimensions:Opened: 45x30 cmClosed: appx.30x18x6 cm Please note that the container lids can vary in color from the ones pictured here. Please note: The PETlings are NOT dishwasher safe! Please rinse by hand after use.
Prices incl. VAT;
Front part for Nakatanenga Evolution 2 Awning, stone grey
Front parts for our awnings series Evolution 2 ... are also suitable for the awnings of other manufacturers - the aluminum front profile must only be equipped with a free keder profile for this purpose or one must be retrofitted. Front parts fulfill - especially in combination with our awning side parts - various functions: They are an excellent windbreak - this is where the relatively heavy fabric (280g/m² PU-coated RipStop polycotton - our stone-grey sun sail and awning fabric) comes into play, which is characterized, among other things, by the significantly reduced fluttering noise.They are the ideal rain protection - for this purpose, our sun sail and awning fabric is metal-coated on one side (inside) and water- and dirt-repellent due to the impregnation of the other side (outside).They can be tensioned or also displayed by means of optionally available telescopic poles and thus increase the shaded area immensely. Because of the small and in itself not worth mentioning packing size, our awning front parts as well as our awning side parts belong to these small things with the enormous benefit. If the awning protects from the evening and night chill from above, these awning extensions again significantly increase the comfort. The inside metal coating - primarily the wetness barrier layer - naturally contributes its part to this, reflecting not only the light of a lamp that is probably present, but also to a certain extent emitted thermal radiation (this effect is minor, but quite noticeable). Material:65% polyester / 35% cottonThe length is always 200cm, please select the width.
Prices incl. VAT;
Compact extension with arch shape for Nakatanenga Evolution2 Awning, stone grey
Sense and purpose of an awning compact extension? Glare protection when the sun is low in the skyThe compact extension was developed directly from practical requirements - a nice formulation that in itself means nothing more than: "We were so annoyed and dazzled by the low sun one fine day that we wanted to remedy the situation." And already the initial question is actually fully answered. But that would only be half the truth. On the following picture you can see an awning without extension shown above: As the sun sinks (the same applies in the morning, of course - but for the sake of clarity we will limit ourselves here to the afternoon or evening situation), the light falls further and further under the awning. At a certain position of the sun, the light/shadow dividing line reaches the eye level of a seated person - from now on, the sun can dazzle until it sets. The illustration below shows an awning with a compact extension, which offers several advantages with its angled bracing: When the sun is high, a much larger area is shaded.Only when the sun is setting, the light/shadow dividing line reaches the eye level of a seated person. Here, of course, deviations are possible, since both the slope of the guy, the size of the person and his sitting position are influencing factors.But the most important thing is: You can see what's going on in your surroundings despite the glare shield! If the eyes and the lower edge of the compact extension are on a horizontal plane, then the view would extend exactly to the (ideal) horizon. If you compare that with a moderately braced complete front part, where the view is just between a few centimetres to a few steps - what a difference! What if the sun comes in from the side?Well, then the vehicle will probably have to be moved. But not with our new compact extension. All you have to do is unhinge it from the front, and you can attach it to the side in just a few easy steps. Voilà!But please note: The awnings have a uniform depth of two meters, but differ in their widths. Ideally it hit here all those who have a 200er awning. Owners of a 250 have three options: They simply allow the extension to protrude when used from the side - utility over beauty.You opt for a 200 compact extension - this does not detract from the function.You buy two compact extensions at once - a 250 for the front and a 200 for the side. Feel free to guess what we recommend ;-) Material:Made from our sun sail and awning fabric, a 280 gsm RipStop Polycotton (65% polyester / 35% cotton), metal coated on one side; water and dirt repellent impregnated;due to the comparatively heavy quality, significantly less flutter. Colour: stone grey (taupe) Our compact extensions are also suitable for use on the awnings of most other manufacturers. The only requirement is a free keder strip in the front profile of the awning or such must be retrofitted.
Prices incl. VAT;
Tool Roll Maxi
No rummaging around required with our Tool Roll Maxi. Just like with its smaller version, the Tool Roll Mini, you get a maximum of space and orderliness from a very compact package. Bigger and heavier tools and accessories are just as quickly within reach as they are stowed away. Think sets of wrenches for off-roaders and bikers or collections of arts and crafts utensils like paint tubes, pens, brushes or carving tools. Kitting out this tool roll is never an issue, due to its 18 pockets and the generous overall size of 44,5 x 81 cm. If it fits your hand, it will (almost) always fit the Tool Roll Maxi. In the production of the Tool Roll Maxi, we only use high quality, durable materials. Hand sewn seams make sure you can roll it up or unroll it countless times without tearing. PU-coated Nylon makes the Tool Roll easy to clean and odorless. Two sturdy adjustable Nylon straps with snap-lock buckles hold everything firmly in place when transporting your tools. When you’re working you can also hang the roll by the strap on a wall in your garage, from your car or even a tree. If you’re a fan of fancy dining in the great outdoors, look no further than our Tool Roll Maxi Hungry Edition – a complete set of quality cutlery and cutting knives by WMF. You can also choose our Tool Roll Mini if your weight or size requirements are somewhat smaller. If you need to go real big on the other hand, our modular Tool Roll with Velcro pouches is the one for you. Material: 100% Nylon MADE IN EU
Prices incl. VAT;
ARMYTEK PRIME C2 PRO MAGNET USB, cold white
Prime C2 Pro - incredibly bright, wide light in a classic format The Prime C2 Pro is an all-rounder for everyday use with a robust body, a practical side scanner and a comfortable light angle of 120°.It is suitable for both everyday and professional use: Walking or cycling, hiking, service work and security activities. The new Prime C2 Pro offers an impressive brightness of 2400 lumens and wider lighting angles than the previous version. The torch also received additional design benefits for the most comfortable everyday use: the length of the housing has been reduced, the striking bezel has been added. The torch comes with a high capacity 18650 Li-Ion 3500 mAh battery that is charged via a proprietary magnetic USB cable. A removable clip attaches the torch securely to a backpack strap or bag, and a magnet in the back cover allows you to attach it to a metal surface. A distinctive steel bezel, secure holster housing and optional colour filters help you successfully tackle any special task. Prime C2 Pro is also compatible with the ABM-01 bicycle mount and can be used as a bicycle headlamp. Light and optics: Colour temperature: cool white Optics: TIR Luminous flux, lumen: 2,400 lm Light range, metres: 123 m Brightness stabilisation: Full (constant light) Central light field: Lateral spread: 70°:120° Operating modes: Number of modes: 6 simple operation by default / 12 advanced operation Running time at highest light level: 2 h 48 min (610 lm after 30 sec) Running time at lowest light level: 6.5 months Strobe mode Dimensions and weight: Head diameter: 25.4 mm Housing diameter: 20.4 mm Length: 117.7 mm Weight (without battery): 68 g Housing: Material: Aircraft-grade aluminium Anti-slip coating: Premium type III hard anodising 400HV Protection class against dust and water ingress: IP68 Max. Immersion depth: 10 m Max. Drop height: 10 m Operating range: -25..+40 °C Electronics Compatibility with power sources: 1x18650 Li-Ion (also available here in the shop!) Use of unprotected rechargeable batteries possible Possibility to use protected batteries Protection against accidental switching on Coloured battery status indicator Low charge indicator Scope of delivery Torch 18650 Li-Ion battery 3,500 mAh Magnetic USB charger Retaining clip Holster with belt loop 2 spare O-rings User manual Application note For further application information, please refer to the product data sheet Please note the legal information on batteries HERE. For certain types of batteries, we are legally obliged to charge a deposit.
Prices incl. VAT;
Floor for shower tent
Floor for shower tent/ changing room Horizon The shower floor is compatible with the Horizon shower tent. Very practical when the Horizon is used as a shower tent with a water system to prevent water from collecting on the ground and causing soft ground and mud. The shower water is drained away to the outside as required thanks to the practical system with drainage pipe and can therefore seep away further away from the shower tent. The floor weighs just 1.5 kg and has a practical, small pack size thanks to the foldable mechanism. Technical details: Weight: 1.5 kg Material: Polyester Color: Black Scope of delivery: 1 x base 1 x hose (water drain) 1 x protective bag
Prices incl. VAT;
Peltonen M95 Ranger Puukko, handle color selectable
Peltonen M95 Ranger Puukko Extreme conditions demand a lot from man and equipment, but they also regularly produce something special. This certainly applies to Peltonen Knives from Finland. Their inventor Juha-Pekka Peltonen learned to appreciate US Army knives when he served as military observer in the heat of the Lebanon. Peltonen decided to combine their features with traditional Finnish knifemaking skills to create Ranger knives for colder latitudes and northern forests. Now, Peltonen all-purpose knives like the M95 are NATO-coded and are used by the military, special forces, hunters, outdoor and bushcraft enthusiasts far beyond Finland. The all-purpose Peltonen Ranger knives are designed with a focus on safe handling, excellent ergonomics and top-grade materials. The blades are forged from scale-free carbon steel (80CrV2), which is particularly suitable for making robust knives used in tactical operations, hunting or survival. This steel is extremely resilient, even if you hack with the knife or work on very hard materials. A Teflon coating (PTFE) protects the blade from rust and prevents the accumulation of dirt or other organic matters. The knife is also certified for food safety, which may be of special importance to hunters or fishermen. The ergonomic handles of the Ranger knives are made of abrasion-resistant, pleasant-to-touch TPE (thermoplastic elastomer). The material is insensitive to temperature and does not absorb any moisture - especially in northern latitudes, when your fingers are often cold and clammy, an absolute must-have for safe and precise handling. The sheath, made of nearly indestructible, dirt- and water-repellent composite plastic, is equally suitable for the left- or right-handed and features an EasyLock mechanism that holds the M95 securely in the sheath, but still allows for quick drawing, even one-handed. The M95 is 28 cm long overall and sports a 15 cm blade. With its textured grip, the M95 is an excellent all-purpose knife for tactical use, survival or hunting - true to the Peltonen motto: The only knife you’ll ever need! Specifications: Blade: 80CrV2 blade steel, length 15 cmHandle: Thermoplastic Elastomer (TPE)Weight: 200 gLength: 28 cm
Prices incl. VAT;
Peltonen M07 Ranger Puukko, handle color selectable
Peltonen M07 Ranger Puukko Extreme conditions demand a lot from man and equipment, but they also regularly produce something special. This certainly applies to Peltonen Knives from Finland. Their inventor Juha-Pekka Peltonen learned to appreciate US Army knives when he served as military observer in the heat of the Lebanon. Peltonen decided to combine their features with traditional Finnish knifemaking skills to create Ranger knives for colder latitudes and northern forests. Now, Peltonen all-purpose knives like the M07 are NATO-coded and are used by the military, special forces, hunters, outdoor and bushcraft enthusiasts far beyond Finland. The all-purpose Peltonen Ranger knives are designed with a focus on safe handling, excellent ergonomics and top-grade materials. The blades are forged from scale-free carbon steel (80CrV2), which is particularly suitable for making robust knives used in tactical operations, hunting or survival. This steel is extremely resilient, even if you hack with the knife or work on very hard materials. A Teflon coating (PTFE) protects the blade from rust and prevents the accumulation of dirt or other organic matters. The knife is also certified for food safety, which may be of special importance to hunters or fishermen. The ergonomic handles of the Ranger knives are made of abrasion-resistant, pleasant-to-touch TPE (thermoplastic elastomer). The material is insensitive to temperature and does not absorb any moisture - especially in northern latitudes, when your fingers are often cold and wet, an absolute must-have for safe and precise handling. The sheath, made of nearly indestructible, dirt- and water-repellent composite plastic, is equally suitable for the left- or right-handed and features an EasyLock mechanism that holds the M07 securely in the sheath, but still allows for quick drawing, even one-handed. The M07 is 25 cm long overall and sports a 11.9 cm blade. With its textured grip, the M07 is an excellent all-purpose knife for tactical use, survival or hunting - true to the Peltonen motto: The only knife you’ll ever need! The blade length complies with German regulations and makes it legal to carry in Germany. With a total weight of 180 g, it is light enough to be carried in outdoor and hiking luggage without sacrificing versatility and robustness. Specifications:Blade: 80CrV2 blade steel, length 11.9 cmHandle: Thermoplastic Elastomer (TPE)Weight: 180 gLength: 25 cm
Prices incl. VAT;
First-Aid Kit (Large) by Nakatanenga
First-Aid Kit (Large) by Nakatanenga This first-aid kit for all kinds of accidents, at home or on the road with-out the contents. Produced after out own design, right here in europe, this kit is velcroed to its base-plate which can be atttched to our tailgate organizer (molle) or any other flat surface, for example. This allows for easy access, but a snug fit thanks to the additional strap securing it to the base-plate. The bag messures about 28x23x13 cm, while the base comes in at about 25x20 cm. Thanks to our innovative system, the bag only opens to a horizontal position, when not detached. Comes with: Bag ( Without Contents) with Nakatanenga Patch and a red First-Aid Patch Velcro Base-Plate
Prices incl. VAT;
Rooftop tents and camping - the perfect equipment for outdoor adventures
Why a rooftop tent?
- Flexibility and mobility: quickly set up and ready for the night, wherever you are travelling.
- Safety and comfort: Sleep elevated and protected from the wet, cold and unwanted animal visitors.
- Convenient handling: Many models can be set up and taken down in just a few minutes - ideal for spontaneous camping stops.
Camping accessories for the perfect outdoor experience
- Awnings and sun sails: For shady and weather-protected lounging areas.
- Camping furniture: Light, robust and comfortable - ideal for any outdoor situation.
- Cooking and kitchen equipment: Everything you need for a delicious meal in the great outdoors.