Automotive engineering

Door retaining strap kit REAR left or right for Defender from MY1986 Doors on your classic Landy are not exactly soft close, like on a Rolls Royce, to put it mildly. The rudimentary mechanism has to put up with a lot, so wear and tear is inevitable. Our high-quality door check strap kit for the second row doors is ideal for repair jobs and upgrades because it is designed to last. The components are extremely robust and the workmanship is precise. Installation at the original mounting points is therefore quick and easy. All mounting materials are included.   Suitable for all Land Rover Defenders from MY 1986 onwards.    PLEASE NOTE: The standard door stay bracket is not included. Please take a look at our article TOEWDEF.   Door catch kit for the front can be found here.  

Highflow sports air filter for Land Rover New Defender L663 Highflow sports air filter for Land Rover New Defender L663 You need 1 piece for: 2.0D (D200/D240) (200/240 hp) year 2/20-9/20; 2.0T (P300/P400e Hybrid) (300/404 hp) year from 2/20; 3.0D (D200/D250/D300) (200/249/300 hp) year from 9/20; 3.0T (P400) (400 hp) year from 2/20; You need 2 pieces for: 5.0T (P525) (525 hp) year from 2/21; Since the combustion engine is basically an air pump - air is sucked in at one end, then burned as a fuel mixture and expelled again at the other end - it benefits when not only individual components are optimized, but the entire system. In addition to chip tuning, which optimizes combustion, the air intake and exhaust system should also be optimized - i.e. tuned - as this is the only way to achieve optimum results and make the most of investments. As is so often the case, the whole is more than the sum of its parts. One of the simplest and cheapest options here is to replace the original air filter with a model with increased air flow. K&N is the inventor and manufacturer of the original when it comes to washable and reusable high-performance air filters. Each air filter is designed for increased performance and a lifetime of durability. The filtering effect remains intact over the entire period. K&N offers a 1,600,000 km warranty on every air filter (filter frame and filter media) in addition to the statutory warranty. Cleaning the K&N air filter is usually not necessary before 80,000 km. You too can rely on the 35 years of experience of the market leader in performance air filters! We offer air filters for almost all cars and off-road vehicles. Buy a K&N and experience the difference: 1,600,000 km warranty. This warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty. performance-enhancing - the higher air flow rate leads to improved acceleration/draft economical: a K&N air filter lasts for the entire service life of your car, motorcycle or off-road vehicle Registration-free Motorsport proven - number 1 in motorsport worldwide Cotton, washable Up to 40% more air flow Saves maintenance costs - no need to buy a new expensive factory paper filter at every inspection Environmentally friendly - its long service life reduces waste and protects trees Cleaning usually only necessary every 80,000 km No more filter changes - the oil-impregnated cotton fabric of the filter ensures a maintenance-free service life, during which the filter only needs to be cleaned and re-oiled from time to time. The filter only needs to be cleaned when a 2-3 mm thick layer of dirt has formed on the filter material. To clean your K&N sports air filter, please only use the K&N cleaning kit provided for this purpose.

LT230ATB installation kit required for the Ashcroft LT230 ATB The kit contains: Collapsible spacer  Nut for the intermediate bolt  Centre diff nut  2 x O-rings  2 x Timken bearings  8 x washers  Silicone sealant Torsen locking differential as centre differential for the LT230 transfer case can be found here in the shop !

Improved braking performance & durability After having been proven and tested for many years, stainless steel brake hoses are now becoming accepted in the off-road scene. The advantages the steel braided PTFE hoses have over customary rubber brake hoses are manifold: no expansion of brake lines under braking no expansion due to hot brake fluid under frequent braking very precise brake response no loss of braking power, resulting in shorter stopping distance precise modulation of braking power improved protection from damage through stones, branches, etc., especially important when off-road driving individually tested by manufacturer at 400 bar pressure New and only at Nakatanenga: these steel braided hoses for Land Rover Defender come with a special mount and fastening material to ensure safe mounting of the brake lines to the rear axle. This in-house developed mounting is made from stainless steel and thus also corrosion free. Our brake lines are 50 mm longer than the original hoses and thus suitable for larger axle travel, e.g. for lifted vehicles. They are sufficient for vehicle lifting kits upt to 90 mm. If you require different lengths, please contact us. These brake lines come with a TUV certificate of approval. In Germany such changes to the brake lines have to be TUV registered for your vehicle. We recommend to check brake fluid level and if necessary a replacement of the brake fluid. The hydraulic system has to be bled after fitting new brake lines. Any work on the braking system should always be carried out by a trained mechanic! Please choose the model year of your Land Rover Defender and whether it has ABS fittedor not: Stainless steel braided brake lines for all Land Rover Defender; 50 mm longer than standard. NEW: with Nakatanenga stainless steel rear axle mounting kit! PLEASE NOTE: The retaining plate is available in a serrated and round shape. NO adjustments need to be made for the round shape.   

Trailing arm hanger kit TREKFINDER for SUZUKI Jimny I type FJ up to year of construction 2018 for the trailing arms at the attachment to the front axle for correction and optimisation of the caster angle recommended for suspensions from 3 cm of height increase 4 bushings with eccentric bore vulcanised in rubber

HD rear left spring - Land Rover Defender 110/130 For maximum load capacity and driving stability This heavy duty coil spring has been specially developed for the right rear installation on Land Rover Defender 110 and 130 models. It is the ideal solution for vehicles that are regularly on the road with high payloads or heavy accessories.  Color code: red/red Price per piece

Trailing arm hanger kit TREKFINDER for SUZUKI Jimny II Type GJ & HJ from MY 2018 onwards for the trailing arms at the attachment to the front axle for correction/optimisation of the caster angle recommended for suspensions from 3 cm height adjustment onwards 4 bushings with eccentric bore vulcanised in rubber

Snow chains for 4x4 - 235/85R16 Suitable for tire size: 235/85R16 TÜV/GS approved Scope of delivery: 2 chains

HD rear right spring - Land Rover Defender 110/130 For maximum load capacity and driving stability This heavy duty coil spring has been specially developed for the right rear installation on Land Rover Defender 110 and 130 models. It is the ideal solution for vehicles that are regularly on the road with high payloads or heavy accessories.  Color code: red/green Price per piece

Lifting kit +50 mm rear axle or front axle - suitable for Land Rover Discovery II (with air-sprung rear axle) More ground clearance, better off-road capability, striking look - with our lift kit for the rear axle (+50 mm) you get the full off-road potential out of your Discovery II.Lift kit for the rear axle with air suspensionThis lift kit is specially designed for the Land Rover Discovery 2 with standard air suspension on the rear axle.By fitting the supplied spacers, the ground clearance is significantly improved and more clearance is created between the tyres and body - ideal for off-road use or larger tyres.The standard air suspension remains fully intact, including automatic levelling. This kit is therefore the ideal solution for a reliable 2-inch lift on the rear axle.Perfectly combinable with the matching front axle kit - without additional adjustments to the air suspension system.All the necessary components are included in the scope of delivery - ready to install and uncomplicated.Lifting kit for the front axleThis kit enables the front axle on the Discovery 2 to be raised if air suspension is still used on the rear axle.It ensures a balanced vehicle level after raising the rear axle and increases both the ground clearance and the wheel arch clearance on the front axle.Ideal in combination with the rear air suspension lift kit - together they create a harmonious 2-inch vehicle lift without impairing the function of the standard air suspension.Supplied complete with all necessary components - ready to install and without additional modifications.Please select the desired variant front and / or rear axle.

High-quality wheel bearing set in OE quality Suitable for Defender, Discovery I, Range Rover Classic.With high-quality components and durable Timken wheel bearings. OE quality Timken wheel bearing 1 set for 1 wheel

Spring cones rear axle suitable for Defender 110/130 Spring cones return the spring "cleanly" when the travel of the shocks is longer than that of the springs, Spring cones fit original springs or Trekfinder springs. Whether this item fits with other accessory springs must be checked on a case-by-case basis due to the possibly thicker wire.Not suitable if additional springs are used. Scope of delivery: 1 pair

Repair kit for the homokinet on the front axle suitable for TDi / TD5 / TD4 till MY2016 with and without ABS Scope of delivery: 1 pc (for 1 bike!) We recommend an exchange on both sides!If you have a car with 10 splines it wont fit, change from 10 splines to 24 splines should be on MY1994 round about. 

Braided steel brake lines for Land Rover Discovery II - improved braking performance & 50 mm longer, incl. parts certificate After having been proven and tested for many years, stainless steel brake hoses are now becoming accepted in the off-road scene. The advantages the steel braided PTFE hoses have over customary rubber brake hoses are manifold: no expansion of brake lines under braking no expansion due to hot brake fluid under frequent braking very precise brake response no loss of braking power, resulting in shorter stopping distance precise modulation of braking power improved protection from damage through stones, branches, etc., especially important when off-road driving individually tested by manufacturer at 400 bar pressure Our brake lines are 50 mm longer than the original hoses and thus suitable for larger axle travel, e.g. for lifted vehicles. They are sufficient for vehicle lifting kits upt to 90mm. If you require different lengths, please contact us. These brake lines come with a TUV certificate of approval. In Germany such changes to the brake lines have to be TUV registered for your vehicle. We recommend to check brake fluid level and if necessary a replacement of the brake fluid. The hydraulic system has to be bled after fitting new brake lines. Any work on the braking system should always be carried out by a trained mechanic! See illustration

Coupling rod/ Rods for height adjustment Installing lift kits for 4x4’s usually requires complex (and expensive) modifications. Not so if your vehicle comes with a self-regulating air suspension, like the New Defender. Raising the ride height of the New Landy by 1 or 1,6 inches takes very little in terms of effort or budget. The principle is very simple and has been employed with Discovery 5 and Range Rover Sport models for quite some time. Simply replace the original rods on all four wheel suspensions with our replacements. The new rod’s different dimensions will trick the self-regulating suspension to permanently lift the ride by 1” or 1,6”, respectively, in all drive modes. Once the new lift rods are installed, the vehicle’s sensor system will adjust itself automatically to the new ride height after the first restarting of your car. Resetting the ride to original factory settings is just as easy and only a question of minutes. We produce these 1“ and 1,6“ lift rods for the New Defender in our own workshop. The rods are laser machined from extremely robust high-quality plastics and the bushings are created in an additive process. This makes both components highly resistant to degradation by weather or chemicals, like fuel, oils etc. The custom-designed bushings are flexible and extend to both sides of the rods’ connections. In terms of quality, this is a far superior solution over many other products on the market, specifically aluminum rods with cheap off-the-shelf cable grommets. Available as +1“ or + 1,6“. Caution: these products are without part certification and are not road legal. They¬¬ may not be used on public roads.

Bumper protection in different colours What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, matt black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer. Available in Black, Matt Black, Anthracite, Silver or Matt Transparent*, the protective film perfectly matches the look of the new Defender, regardless of its paint finish or colour scheme. Please note:The transparent version differs from the other versions in terms of price and workmanship, as it uses a specially developed, UV-stabilised film. This film is specifically designed to minimise material yellowing caused by UV radiation and ensure long-term visual stability.The transparent film MUST be applied wet! For professional application, we provide detailed installation instructions and the necessary processing materials. Instructions for wet application: Fill a spray bottle with water and 1–2 drops of washing-up liquid (or mounting/application solution). Remove coarse dirt from the loading sill with a damp cloth and then clean thoroughly with the enclosed cleaning cloth – the surface must be clean and dust-free. Spray the loading sill evenly. Remove the protective film from the film and also spray the adhesive side lightly (so that it does not stick immediately). Apply the film and align it carefully. The moisture allows it to be moved around. Squeegee out the water, working from the centre outwards. Apply even pressure to remove the water and air bubbles. Remove any excess liquid with a cloth. The film is fixed after squeegeeing, but only reaches its final adhesion after 24–48 hours.   During this time: Do not wash, do not use a high-pressure cleaner. Keep as dry as possible and avoid mechanical stress.    

Heater Engine Resistor OEM Land Rover Series III Triumph GT6 TR4 TR6Reference number 7H6926.

Fuel filler nozzle for Land Rover Defender Td5 2.5, Td4 2.4 and Td4 2.2 The fuel extractor for the Land Rover Defender 90/110/130 Td5 2.5, Td4 2.4 and Td4 2.2 enables the auxiliary heater to be supplied with diesel without the time-consuming and labour-intensive removal of the fuel tank.The fuel is extracted by looping the extractor into the hose between the vehicle's fuel nozzle and tank and is therefore possible without removing or drilling into the tank. The fuel dispenser is suitable for various parking heaters, including Webasto Airtop 2000 and Eberspächer Airtronic D2.The fuel filler cap can be flexibly bent, allowing you to control whether the parking heater can completely empty the vehicle's tank or whether a fuel reserve should remain. It is ideally suited for our AUTOTERM Planar heaters. Outer diameter: 59 mm Material thickness: 2 mm Length: approx. 45 cmPlease note: This fuel filler is not suitable for TDI models, as these have a larger pipe diameter.

Fuel pick-up unit When retrofitting a Diesel heater in your car, the most difficult part is connecting the fuel pick-up line to the car’s Diesel tank. Our fuel pick-up unit simplifies this step greatly, as there is no need to de-install the tank or drill holes in it. The fuel pick-up unit is inserted in the fuel filler hose between filler neck and the tank, a modification suitable for most Diesel vehicles with a hose diameter of 42 mm, as is the case with the Ford Transit Custom for example. We also have a version for classic Defenders (up to MY 2016) with 59 mm available. By bending the flexible fuel pick-up line, you can set a specific level to which the heater can empty the tank, whether completely or up to a certain reserve level. The fuel pick-up unit will work with a wide variety of Diesel heaters, like the Webasto Airtop 2000 or Eberspächer Airtronic D2. It is ideal in combination with our AUTOTERM (Planar) heaters. Outside diameter: 42 mm Material strength: 2 mm Length: approx. 45 cm

Highflow racing air filter for Land Rover Defender Td4 2.4 and 2.2, from MY2007, also fits 2.2 litre models from 2012! The engine needs air for its combustion process. This air is sucked in via the air filter. As it is best to optimize all steps of the combustion process, like chip tuning which modifies combustion on the engine level, the air intake system should also be optimized for maximum performance. The first and most cost-effective step should be to swap the standard OE air filter for one with higher air flow. K&N are the inventors and producers of the original when it comes to washable, reusable high-performance filters. Each filter has been optimized for more performance and lifelong service. The filter effect stays the same throughout all its use, and apart from the legally required warranty, K&N gives a 1,600,000 km warranty on any of their filters. Cleaning is usually not necessary during the first 80,000 km. Trust the 35-year-long experience of the market leader for high-performance air filters! We offer K&N filters for most passenger vehicles and 4x4. Buy K&N and experience the difference: 1,600,000 km warranty in addition to the normal liability claims. improves performance - higher air throughput means higher speed-up cost-efficient; one K&N filter for the whole lifetime of your car, motorbike or 4x4 no TUV testing necessary used in racing - world number 1 in motoring cotton, washable up to 40% higher throughput saves maintenance costs - no new OE filter with each service environment friently - reduces waste and protects trees usually only needs to be cleaned every 80.000 km No more filter changes - the oil proofed cotton gauze means maintenance free lifespan, the filter only needs to be washed occasionally and oil re-applied. The filer only needs to be cleaned if there is a  2-3 mm layer of dirt on the filter gauze. Please use only K&N cleaning kit for your K&N air filter.

Bag for snow chains, recovery straps, winch ropes etc. Originally this bag was created for snow chains. But you can also use the practical helper to store recovery straps, winch ropes and much more. The upper edge of the bag is provided with a revolving Velcro which makes the bag easy to open and close. Additional closure protection is provided by the buckle. At the lower end of the pocket are incorporated small openings through which e.g. melting snow can run off. For a comfortable loading and unloading of heavy chains, we have added an additional smaller grip loop. On the front of a Velcro added which can be used individually. On the one hand, the inside worked-in tab separates the pocket in half by e.g. two chains can be separated from each other and can also be used as a work surface. Dimensions: Width bottom: 48 cm Width above: 58 cm Height: 45 cm Depth (bottom: 10 cm) Material: Bag: 100% PVC (flame retardant) Webbing: 100% polyamide Buckle: Duralfex

Highflow racing air filter for Land Rover Defender Td5 2.5, Land Rover Discovery Td5 2.5, Land Rover Discovery II 4.0, Range Rover I and II 3.9/4.0/4.6. The engine needs air for its combustion process. This air is sucked in via the air filter. As it is best to optimize all steps of the combustion process, like chip tuning which modifies combustion on the engine level, the air intake system should also be optimized for maximum performance. The first and most cost-effective step should be to swap the standard OE air filter for one with higher air flow. K&N are the inventors and producers of the original when it comes to washable, reusable high-performance filters. Each filter has been optimized for more performance and lifelong service. The filter effect stays the same throughout all its use, and apart from the legally required warranty, K&N gives a 1,600,000 km warranty on any of their filters. Cleaning is usually not necessary during the first 80,000 km. Trust the 35-year-long experience of the market leader for high-performance air filters! We offer K&N filters for most passenger vehicles and 4x4. Buy K&N and experience the difference: 1,600,000 km warranty in addition to the normal liability claims. improves performance - higher air throughput means higher speed-up cost-efficient; one K&N filter for the whole lifetime of your car, motorbike or 4x4 no TUV testing necessary used in racing - world number 1 in motoring cotton, washable up to 40% higher throughput saves maintenance costs - no new OE filter with each service environment friently - reduces waste and protects trees usually only needs to be cleaned every 80.000 km No more filter changes - the oil proofed cotton gauze means maintenance free lifespan, the filter only needs to be washed occasionally and oil re-applied. The filer only needs to be cleaned if there is a  2-3 mm layer of dirt on the filter gauze. Please use only K&N cleaning kit for your K&N air filter.

Safely through the water - with the Nakatanenga Wading Kit A raised air intake (snorkel) is only the first step when you want to make your vehicle safe for water crossings. The existing breathers definitely have to be raised, too. If this isn't done, ingression of water and dirt can lead to failure, requiring expensive recovery and repairs. The Nakatanenga wading kit for Land Rover Defender Td4 90 / 110 / 130 extends the existing breather lines or adds non-existing breaters to the following components of your vehicle: front axle rear axle transfer box main gearbox fuel tank Comes with fitting instructions.

Steering drop arm puller - for Defender This item was designed to remove the handlebar arm from the steering box. The Defender steering drop arm can wear because of its position low down at the front of the chassis — it’s exposed to all the road spray and water that gets thrown at it. Water gets into the joint and eventually you will have to replace the drop arm and ball joint because the rust has corroded it. However splitting the steering drop arm from the steering box can be problematic because the steering drop arm and the steering box splines corrode together. This tool solves that problem. Supplied with a spare threaded bar.

Extra robust for the toughest applications HD spring for Land Rover Defender 90 rearColor code: (pink-red-yellow) Price per piece

Steering Damper Heavy Duty for Land Rover Defender

Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.  

Highflow sports air filter for Suzuki Jimny2 (GJ) Since the combustion engine is basically an air pump - air is sucked in at one end, then burned as a fuel mixture and expelled again at the other end - it benefits when not only individual components are optimized, but the entire system. In addition to chip tuning, which optimizes combustion, the air intake and exhaust system should also be optimized - i.e. tuned - as this is the only way to achieve optimum results and make the most of investments. As is so often the case, the whole is more than the sum of its parts. One of the simplest and cheapest options here is to replace the original air filter with a model with increased air flow. K&N is the inventor and manufacturer of the original when it comes to washable and reusable high-performance air filters. Each air filter is designed for increased performance and a lifetime of durability. The filtering effect remains intact over the entire period. K&N offers a 1,600,000 km warranty on every air filter (filter frame and filter media) in addition to the statutory warranty. Cleaning the K&N air filter is usually not necessary before 80,000 km. You too can rely on the 35 years of experience of the market leader in performance air filters! We offer air filters for almost all cars and off-road vehicles. Buy a K&N and experience the difference: 1,600,000 km warranty. This warranty is independent of the existing free statutory warranty rights. The statutory warranty rights are not restricted by this warranty. performance-enhancing - the higher air flow rate leads to improved acceleration/draft economical: a K&N air filter lasts for the entire service life of your car, motorcycle or off-road vehicle Registration-free Motorsport proven - number 1 in motorsport worldwide Cotton, washable Up to 40% more air flow Saves maintenance costs - no need to buy a new expensive factory paper filter at every inspection Environmentally friendly - its long service life reduces waste and protects trees Cleaning usually only necessary every 80,000 km No more filter changes - the oil-impregnated cotton fabric of the filter ensures a maintenance-free service life, during which the filter only needs to be cleaned and re-oiled from time to time. The filter only needs to be cleaned when a 2-3 mm thick layer of dirt has formed on the filter material. To clean your K&N sports air filter, please only use the K&N cleaning kit provided for this purpose.

Original Transfer Case Gear Lever Knob for Land Rover Defender TD4 The original transfer case gear lever knob for the Land Rover Defender TD4 is the perfect solution if your existing knob is worn, damaged, or no longer provides sufficient grip. This replacement part is specifically designed for the low range / transfer box gear lever and ensures safe, comfortable shifting even under the toughest off-road conditions.   Perfect Fit and Robust Design: This gear lever knob is a genuine Land Rover replacement part and fits perfectly onto the transfer case gear lever (LT230) of the Defender TD4. Thanks to its precise fit, it provides a direct and secure connection to the lever, giving you full control over the transfer box functions of your Landy at all times.   Comfort in Every Situation Whether on the road or off-road, the transfer case can be operated intuitively and safely with this gear knob. Even with frequent use, it proves to be durable and wear-resistant, making it especially suitable for vehicles regularly used in demanding conditions.   Easy Installation: Thanks to its original design, the gear lever knob can be installed quickly and easily. It is ideal for repairs, maintenance, or as a direct replacement after years of use.

Maximum load capacity - optimum handling This Heavy Duty spring was specially developed for the Land Rover Defender 90, 110 and 130 and offers a noticeable improvement with high payloads, trailer operation or demanding off-road use. Whether on the construction site, off-road or when overlanding - with this reinforced spring, your Defender stays reliably on track. Color code: blue/red Price per piece

Air Ram Safari - Diameter 3 Zoll (76mm)  Safari snorkels are manufactured to the highest standards in durable, UV stable, cross linked polyethylene material, using stainless steel hardware where appropriate. Each system includes quality fixtures and fittings, which offer superior sealing, presentation and long-term durability.In arguably the best, if not toughest environment, Safari Snorkel Systems are thoroughly researched, tested and tooled for each model of Land Rover.The Safari Snorkel delivers a continuous and cooler supply of air for maximum engine performance. It is positively sealed as well to ensure the best protection against deep water crossings and dust.

Manifold mounting kit for Defender TD5 Complete kit for reliable sealing and mounting of the exhaust manifold on the Land Rover Defender TD5. Ideal for repair or replacement - all required components in one kit. incl. mounting material