HD suspension for Land Rover Defender 110 (for heavily loaded rear axles) Set consists of:  1x TREKFINDER coil springs  2x front axle shock absorbers 2x holder for additional spring, rear, bottom 2x bracket for additional spring, rear, top 1x lift spring set for Land Rover Defender 110 2x shock absorber Koni HeavyTrack RAID Defender  Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Suspension for Land Rover Defender 130 Set consists of:  1x TREKFINDER coil springs 1x lift spring set 2x shock absorbers for Land Rover Defender 90 / 110 / 130 2x shock absorbers Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Suspension for Land Rover Defender 130 Lightweight Set consists of:  1x TREKFINDER lift spring set for Land Rover Defender 1102x shock absorber for Land Rover Defender 90 / 110 / 130 front axle2x shock absorber Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

Lifting suspension TREKFINDER for Land Rover Defender 90 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetres lift ZTo optimise the Land Rover Defender 90, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible suspension optimisation solution. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery: 4 TREKFINDER coil springs 4 TREKFINDER shock absorbers 1 TREKFINDER sticker 1 piece parts certificate  Due to the increased articulation angle of the front propshaft caused by the lift, we recommend the installation of a propshaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.   

Lifting suspension TREKFINDER for Land Rover Defender 110 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetre lift To optimise the Land Rover Defender 110, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible solution for suspension optimisation. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery:* 4 TREKFINDER coil springs * 4 TREKFINDER shock absorbers * 1 TREKFINDER sticker * 1 parts certificate Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.   

Lifting suspension from TREKFINDER for SUZUKI Jimny II type GJ from 10/2018 / HJ - the lift is approx. 40-50 millimetres Suitable for model / vehicles:Jimny type GJ from 2018 > / HJdepending on variant: with / without installed cable winch in front depending on variant: with / without steel braided brake line setwith or without LED light with manual transmissionwith automatic transmissionwith 1,5 L engine 75 Kwwith axle loads VA 680 Kg / HA 880 Kgwith ABE-EG number: e6*2007/46*0253*.. oder e6*2007/46*0515*.. SCOPE OF DELIVERY 1-SUJI2F1: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F2: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by LUCAS GIRLING®1 piece TREKFINDER mounting kit for models with LED headlight1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F3: 2 pieces TREKFINDER coil spring front axle, progressive wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate SCOPE OF DELIVERY 1-SUJI2F4: 2 pieces TREKFINDER coil spring front axle, linear wound, Made by H&R®.2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R®.2 pieces TREKFINDER shock absorber front axle, monotube gas pressure B6, Made by BILSTEIN®2 pieces TREKFINDER shock absorber rear axle, monotube gas pressure B6, Made by BILSTEIN®1 piece TREKFINDER mounting kit for models with LED headlights1 piece TREKFINDER TÜV® parts certificate Translated with www.DeepL.com/Translator (free version)

Lifting suspension by TREKFINDER for SUZUKI Jimny I Type FJ|the lifting is approx. 55 millimetres SUPPLY: 1-SUJIF1.1 BILSTEIN - not hardness adjustable - very tight tuning 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, B6 not adjustable, Made by BILSTEIN 2 pieces TREKFINDER shock absorber rear axle, B6 not adjustable, Made by BILSTEIN 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate SUPPLY 1-SUJIF1.2: KONI - height adjustable - comfortable to very tight tuning possible 2 pieces TREKFINDER coil spring front axle, progressively wound, Made by H&R 2 pieces TREKFINDER coil spring rear axle, progressively wound, Made by H&R 2 pieces TREKFINDER shock absorber front axle, heavy track 5-way adjustable, Made by KONI 2 pieces TREKFINDER shock absorber rear axle, Heavy Track 5-way adjustable, Made by KONI 4 pieces TREKFINDER steel braided brake line, stainless steel & protective jacket, Made by ZF/LUCAS GIRLING 1 piece TREKFINDER TÜV® parts certificate Info KONI: The suspension or dampers are delivered from the factory in the most comfortable damper setting ( open ). Ideal for vehicles that are driven daily on and off the road without additional weights. Fine damping of bumps, asphalt edges, holes, curbs etc. WITHOUT being spongy. WITHOUT being spongy! For applications and wishes that make a harder shock absorber sensible (e.g. roof rack, cable winch, camping equipment etc.), 5 hardness levels are available with the KONI shock absorber in order to be able to individually tighten the shock absorber! The levels are clearly noticeable when driving. In our opinion, there is a suitable set-up for every application. OPTIONAL additionally available:- for level compensation and can be mounted once per spring, the TREKFINDER spring spacer rings 10 mm with Art. No. 1-FDR10- the reinforced steering damper from TREKFINDER with the Art. No. 1-SUJILD.1  

TREKFINDER complete protection for Suzuki Jimny II (GJ/HJ) - 5 parts, full safety suitable for all Jimny models of the type GJ built from the end of  2018, Typ HJ suitable for all engine and transmission types including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty versions Delivery: underride protection linkage 5 mm anodised aluminum underrun protection axle tube / differential front axle 5 mm galvanized steel underride protection transfer case 8 mm aluminum underride protection exhaust gas control system 3 mm galvanized steel underrun protection axle tube / differential rear axle 5 mm galvanized steel

Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate

Winch bumper TREKFINDER, Land Rover Defender, with/without air conditioning, incl. parts certificate This winch bumper is suitable for Defender models with or without air conditioning. The angle of the bumper is optimal for vehicles with air conditioning, because the bumper sits very far back. The bumper is made of quality steel, which is cathodic dip painted and then powder coated black. The material thickness of the tubes is 4mm and is welded watertight. Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille. Further info: 500 h salt spray test! 2 very stable plug-in mounts for the Hi-Lift jack A parts certificate is included in the scope of delivery. ATTENTION! The following articles are NOT included in the scope of delivery: Cable winch Winch cover Roller rope window cover

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Lowering spring kit TREKFINDER for LAND ROVER Defender 90 - the lowering of the progressively wound springs is approx. 45/40 millimeters on the front axle/rear axle- the standard shock absorbers can still be used- the rolling tendency is significantly reduced- Suspension comfort is not affected- the agility when turning etc. is significantly improved- for the perfect driving experience, we recommend the TREKFINDER steering damper ( Art. No. 1-LRDELD ) Suitable for LAND ROVER Defender 90 models:Vehicle manufacturer: Land Rover ( GB )Vehicle type/make: LDCommercial designation/model: Defender 90Perm. axle loads ( f/h ) in kg: 1250 / 1500EC-TG-No.:e11*96/79*0086*11/..e11*2007/46*0133*..*)K738*05K738*06 SCOPE OF SUPPLY:4 pieces TREKFINDER progressive coil springs, spring color: yellow-green1 piece TÜV® parts certificate  

TREKFINDER suspension kit LAND ROVER Defender II 90/110 with steel suspension / coil springs +50 mm sporty tight tuning without being uncomfortable eliminates the standard spongy, indirect suspension and driving behaviour Height increase approx. 50 mm ( depending on type and version ) trailer operation is still permissible The length of the shock absorbers, brake lines and other lines is sufficient. Version: Defender 90: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Design: Defender 90 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1400 / 1775EC-TG no.:e5*2007/46*0092..e5*2007/46*0152.. Version: Defender 110: Suitable for the following models: Vehicle manufacturer: Jaguar Landrover (GB)Vehicle type / make: LE / Land RoverTrade name / Model: Defender 110 L663 ( M1G o. N1G ) WITHOUT air suspension!Perm. axle loads ( v / h ) in kg: 1560 / 1800EC-TG no.:e5*2007/46*0092*..e5*2007/46*0125*.. Scope of delivery: 2 pieces TREKFINDER coil springs front axle / linear / black metallic 2 pieces TREKFINDER coil springs rear axle / progressive / black metallic 1 piece TÜV® parts certificate

Sportier Look and Optimized Handling: The TREKFINDER Lowering Spring Kit -40mm for Your Defender 110! You love your Land Rover Defender 110 for its robustness and character, but do you wish for a more direct driving feel on the road, improved road holding, and an even more striking, individual appearance? Then we have exactly what you need: the TREKFINDER lowering spring kit for your Defender 110, which lowers it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a significantly more dynamic and planted look but also noticeably optimize its handling on paved roads. Reducing the vehicle height lowers the center of gravity, which can lead to more agile handling and less body roll in corners. Why TREKFINDER Lowering for Your Defender 110? Improved Road Holding: Experience a more stable and precise driving feel, especially in corners and at higher speeds. Sporty, Striking Look: Give your Defender 110 an individual, lower look that makes it stand out from the crowd. More Direct Turn-in: Benefit from a more agile response of your vehicle to steering inputs. Easier Entry: The lower vehicle height can make getting in and out, as well as loading the roof, easier. High-Quality Springs: The specially developed springs are designed to offer an optimal balance between a sportier driving feel and good remaining comfort. Progressively Wound Springs: The lowering is approx. 45 mm on the front axle and approx. 40 mm on the rear axle. Standard Shock Absorbers Can Still Be Used: In most cases, the original shock absorbers can still be used. However, for maximum performance and to maintain optimal spring travel, we recommend combining them with suitably adapted, shorter sports shock absorbers. TÜV Parts Certificate Included: For hassle-free registration, a TÜV® parts certificate is, of course, included. Parts certificate made by H&R. What's Included in the Set? 4 TREKFINDER coil springsThe springs are made from high-strength material 54 CrSi6 - the surface has been solidified by shot peening, zinc phosphated, and polyester coated. 1 TÜV® parts certificate This lowering spring kit is suitable for various Land Rover Defender 110 models (please refer to the enclosed parts certificate for exact model compatibility). ATTENTION: The rear axle load must be reduced to 1,800 kg! Body roll is significantly reduced. Suspension comfort is not impaired. Agility during turn-in, etc., is significantly improved. Your Defender. Your Style. Your Performance. With the TREKFINDER lowering spring kit, you're investing in a more individual appearance and optimized handling for your Land Rover Defender 110. Redefine your Landy's presence and enjoy an extra boost of driving dynamics in everyday life and on journeys. Do you have questions about installation or the ideal combination with suitable shock absorbers? Just contact us – we at Nakatanenga are happy to advise you comprehensively!

Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016  

Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.

More Ground Clearance and Off-Road Performance for Your Defender 90: The TREKFINDER Suspension Lift Kit +40mm! Do you want to take your Land Rover Defender 90 where others have to turn back? Are you looking for more ground clearance, better approach and departure angles, and an even more imposing look for your iconic vehicle? Then we have exactly what you need: the TREKFINDER suspension lift kit for your Defender 90, raising it by approx. 40 millimetres! With this spring kit, you'll not only give your Defender a more aggressive look, but also noticeably improve its off-road capability. Whether you're battling through deep ruts, mastering rocky passages, or just want to keep an overview in the urban jungle – the additional 40 millimetres make the difference. Why TREKFINDER for Your Defender 90? More Ground Clearance: Overcome obstacles more easily and ensure better underbody protection. Improved Approach and Departure Angles: Master steeper inclines and declines? No problem! Option for Larger Tires: Create space for larger tires and thus optimize traction and appearance. Progressive Spring Rate: The specially wound springs are designed to offer optimal performance both unladen and with additional equipment (up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle). For you, this means: comfort on the road and, at the same time, the necessary stability in off-road conditions. Standard Shock Absorbers Can Still Be Used: In most cases, you can keep your original shock absorbers, which makes the conversion straightforward. For the ultimate driving experience, however, we recommend combining them with suitable shock absorbers, such as the TREKFINDER Koni RAID dampers. TÜV Parts Certificate Included: For a hassle-free registration, a TÜV® parts certificate is naturally included in the delivery scope. What's Included in the Set? 4 TREKFINDER coil springs with progressive rate 1 TÜV® parts certificate This suspension lift kit is suitable for various Land Rover Defender 90 models (TDI, TD5, TD4 – please refer to the parts certificate for exact model compatibility). Due to the increased angle of the front propshaft caused by the lift, we recommend installing a propshaft with a double cardan joint: Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here. Your Defender. Your Adventure. Your Decision. With the TREKFINDER suspension lift kit, you're investing in more freedom and performance for your Land Rover Defender 90. Discover new paths and experience off-road adventures on a new level. Do you have questions about installation or combining it with other suspension components? Just contact us – we at Nakatanenga are happy to advise you!

Lifting spring set TREKFINDER for Land Rover Discovery Sport Type LC approx. +30 millimetres the ride height is approx. +30 millimetres suitable for Land Rover Discovery Sport Type LC the standard shock absorbers can still be used Scope of delivery: 4x piece TREKFINDER coil spring 1x piece TREKFINDER sticker 1x piece parts certificate

Suspension lift kit TREKFINDER for JEEP® Renegade +30 millimetres the lift is approx. +30 millimetressuitable for the Renegade 4WD type BU model ‘TRAILHAWK’.A suitable version for the standard model of the Renegade 4WD Type BU can be purchased here.The standard shock absorbers can still be usedScope of delivery:  4x TREKFINDER coil spring 1x TREKFINDER sticker 1x piece parts certificate PLEASE NOTE: NOT suitable for hybrid vehicles!

Aluminium spray widener for Defender 90/110 66mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval.  All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70 per cent lighter than ordinare spacers made from steel. Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 66 mm per axle (2x 33 mm) material: aluminium alloy colour: black alignment: center alignment Vehicles:  Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate. Please note: The wheel spacer is not suitable for Dotz Dakar rims, as this rim has a built-in wheel spacer of 25 mm.

Lightweight aluminium wheel spacers (46 mm) - set for front & rear axle, with parts certificate 46 mm / axle, set for two axles, black aluminum, comes with ABE / TUV approval. Defender 130 rear max load weight needs to be lowered to 2 tonnes. All wheel spacers made by TREKFINDER are made of a high-tensile but lightweight aluminium alloy and are anodized for extra corrosion resistance. They are high-tech down to the last detail! Trekfinder spacers are up to 70% lighter than ordinare spacers made from steel.Product details: precision machining on state of the art CNC mills made from high-tensile aluminium alloy maximum corrosion protection through anodizing TUV approval for all models can be used with standard and after-market rims 100% made in Germany Technical Details: with: 46 mm per axle (2x 23 mm) material: aluminium alloy colour: black alignment: center alignment Vehicles:  Land Rover Defender 90 / 110 / 130 Tdi Land Rover Defender 90 / 110 / 130 Td5 Land Rover Defender 90 / 110 / 130 Td4 Land Rover Discovery I Range Rover Classic Please note: With the rear axle unloaded, the wheel spacer can also be used for the Land Rover Defender 130.  These spacers are well-suited for 255/85R16 tyres on Wolf rims (6.5x16") fitted to Land Rover Defender - this combination is explicitely covered in the TUV certificate.

Lifting spring kit TREKFINDER for JEEP® Renegade +30 millimetres     the ride height is approx. +30 millimetres     suitable for the standard model of the Renegade 4WD type BU.     A suitable version for the "TRAILHAWK" model can be purchased here.     the standard shock absorbers can still be used Scope of delivery:     4x piece TREKFINDER coil spring     1x piece TREKFINDER sticker     1x piece parts certificate

TREKFINDER Wheel Spacer Mercedes G Wheel spacer for Mercedes G by TREKFINDER with conversion from screws to bolt system with 60 mm wheel spacer per axle made of high-strength, hard anodised aluminium.Scope of delivery for 2 axles. Details:    conversion from wheel bolt to wheel nut    60 mm per axle    made of high-strength aluminium alloy    DRM system + LK 130/5 + MZ84 + M14 x 1.5    price for two axles    the bolts for fixing the wheel to the axle are included in delivery    wheel nuts with ball collars are included    incl. parts certificate    easy plug&play mounting

Wheel spacer for SUZUKI Jimny II Suitable for Jimny II type GJ from model 2018 and type HJ Only the following wheel/tyre combination is listed in the parts certificate: Wheel spacer from TREKFINDER 44 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacer from TREKFINDER 50 mm for 2 axles:195/80R15 + 205/75 and 215/75R15 Wheel spacers from TREKFINDER 56 mm for 2 axles195/80 + 205/75 and 215/75R15 The Trekfinder 56 mm wheel spacer for 2 axles is available with and without mudguard widening. Colour: Trekfinder: silver aluminium

Spring Distance Kit ( FDS ) from TREKFINDER for Defender 110/130 VA & HA +30 mm complete car Suitable for: Defender 110 Defender 130 Details: the lift is 30 millimetres made of aluminium black hard anodised the scope of delivery is for both axles, i.e. a complete car the discs are installed between the lower spring end and the spring plate the standard shock absorbers can still be used the discs may only be used with the standard springs please also note the optional mounting kit Art. No.: FDS-AN SCOPE OF DELIVERY: 4 spacer discs 1 TÜV® parts certificate  

Spring Distance Set ( FDS ) from TREKFINDER for Defender 90 VA & HA +30 mm complete car Suitable for: Defender 90 Details: the lift is 30 millimetres made from aluminium black hard anodised the scope of delivery is for both axles, i.e. a complete car the discs are installed between the lower spring end and the spring plate the standard shock absorbers can still be used the discs may only be used with the standard springs SCOPE OF DELIVERY: 4 spacer discs 1 TÜV® parts certificate  

Underride Protection for Suzuki Jimny II When you go Off-Road and you're pushing the limits of your vehicle, you should protect your cas as best you can. This Underride Protection, engineered to perfectly fit the second generation of Suzuki Jimny, now makes for a care free travel across all kinds of terrain. The 6 mm thick aluminium fits all engine sizes and all kinds of transmissions.  Additionally and for an even easier instalation, all the nuts and bolts are already included.

TREKFINDER Underride protection for SUZUKI Jimny 2 type GJ / HJ transfer case suitable for all Jimny models of the type GJ built from the end of  '2018 and Type HJ suitable for all engine and transmission types made of 8 millimeters of aluminum including all mounting parts attachment to original points of the vehicle super stable and flat heavy duty version

TREKFINDER wheel spacer kit for INEOS Grenadier + 66 millimetres Track widening 66 mm by fitting spacer rings on the front and rear axle or only on the rear axle in conjunction with alloy wheels or standard INEOS Grenadier steel wheels. The following vehicles are approved according to the TÜV parts certificate: Vehicle manufacturer: Ineos Automotive (UK) / 2295Vehicle type: GN, GMCommercial designation/version: INEOS GRENADIER 6-cylinder diesel & petrol engine, 2+5 seaterEC - TG - No. : e9*2018/858*11384*... ; e9*2018/858*11385*... The following wheel/tyre combinations are approved according to the TÜV parts certificate: 265/70R17 with 7.5x17255/70R18 with 8.0x18 Scope of delivery: Selectable: 2 pieces (1 axle) or 4 pieces (2 axles) Aluminium wheel spacer plates, black anodised1 set of fixing nuts1 set of fitting and care instructions1 TÜV parts certificate Notes on installation:The screw-in length of all fastening elements must be at least 7.5 turns (M14x1.5).Ensure that the stud bolts are long enough.The bolted-on spacer rings are fastened to the vehicle using the fastening elements supplied by the spacer ring manufacturer (M14x1.5 tapered collar). The standard wheels are fastened with the standard fastening elements.The standard stud bolts may protrude slightly (up to 2 mm) beyond the wheel contact surface of the spacer rings. In conjunction with the standard Ineos steel wheels or LM wheels without "cast pockets", which can accommodate the standard stud bolts and nuts protruding beyond the wheel contact surface, the standard stud bolts must be shortened slightly. The minimum screw-in length of all fastening elements of 7.5 turns must be maintained. Wheel cover requirements:Adequate coverage of the wheel/tyre combination must be achieved by fitting 35 mm wide, permanently attached wheel cover extensions.The surface-mounted wheel cover extensions must be fitted at an angle of 30 degrees to the front and 50 degrees to the rear in relation to the vertical centre line of the wheel. Notes on the modification measure:There are no technical objections to the use of standard or other wheel/tyre combinations up to the above (limit) wheel/tyre combinations in conjunction with the described spacer rings if the following conditions are met: - Separate suitable expert reports are available for the wheel/tyre combinations and the conditions listed therein are complied with. In addition, the above-mentioned conditions must be observed and applied if necessary.- If other wheel/tyre combinations are used, their suitability (freedom of movement, driving behaviour, etc.) must be checked and verified separately.- There are no technical objections to the additional use of tested lowered or raised suspension (with parts certificate or ABE). In the case of suspension modifications with non-standard end stops, the suitability of the conversion must be checked or verified separately.  

Maximum off-road control - TREKFINDER KONI RAID shock absorbers for Defender This TREKFINDER damper fits the Defender 90 / 110 / 130 Discovery 1 Range Rover Classic front axle by KONI Heavy Track RAID - suitable for vehicles with lifts up to +5 cm. This part is sold per piece.