Seat covers for off-roaders

Seat covers for Suzuki Jimny II (model: GJ, from year of manufacture: 2018 / model: HJ) Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. available in these variants:  Driver's side Passenger side Rear seat  Driver and passenger side Driver's side, front passenger's side and rear seat Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Seat cover for Land Rover New Defender 110/130, driver and passenger side This isn’t off-the-peg, this is made to measure! If you’re looking for seat covers for the New Defender – the front seats to be precise – look no further than our seat protectors made from durable, and easy-to-clean 1000D Nylon 6.6. The seat covers were developed by us in our own tailor's workshop  – guaranteeing highest functionality and best workmanship. To ensure maximum comfort and compatibility with the climate technologies in your seats, the covers feature breathable mesh fabric on the actual sitting surface. And even though it is mesh, it will still protect the seat from dirt and moisture. To achieve a perfect fit, the one-piece cover is tightly tailored and does not require zippers or similar. Simply pull it over the seat, Velcro the top part underneath the headrest and close the sturdy straps and buckles on the underside. Additionally, a mesh pocket with a rubber foam piece inside is wedged into the gap between backrest and seat surface to prevent the cover from sliding. On the sides, openings in the cover allow easy access to the headrest controls. As with all our textile products, we always aim to add additional storage space. Generously sized MOLLE patches on the sides as well as large pockets in the rear of the backrest and the front rail of the seat make it very easy to store everyday items and small pieces of equipment temporarily or permanently. Our seat protectors come in the colors Coyote or black with uni-colored mesh insets. Material: Nylon, PU-coated Not suitable for New Defender 90The seat in the 90 design has a folding mechanism on the side to tilt the seat. These seat covers have NO! Recess for this lever.  This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.  

Seat covers for Suzuki Jimny I Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. Available for: Suzuki Jimny I  Set consists of: Driver's side, passenger's side Colour: Coyote, Black,  Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Nakatanenga Seat Cover for Defender TD4 ('07 +) Nakatanenga seat covers for Land Rover Defender Td4 from 2007 These seat covers are now even more accurate than the previous ones and thus provide the ultimate protection with the highest comfort. Seat and back is made of high quality and breathable mesh material. The driver's and front passenger's seats are equipped on both sides with pratic Laser Cut Molle. This can also be found at the back of the seats. Furthermore, the driver and front passenger seats on the back have both a card pocket and a zipped pocket. The Molle offers a variety of possibilities. For example you can attach our practical bag set, with our tightening and fastening belt set fix small items or stow a first aid scissors within reach. The high-quality Laser Cut Molle on the backs of the backrests and on both sides of the front seats allows you to attach many different accessories. Driver or passenger side is 2-pieces each. (Seat cover + headrest)Rear seat is 5-pieces (3 headrests, 1 small cover, 1 large cover) Product features: large map pocket on the back of the backrest zipped pocket on the back of the backrest vlecro / loop tape on the headrests lasercut Molle attachment system for attaching additional bags or equipment (partially on the side and on the backrest) washable at 30 ° C perfect fit, no slipping extremely stable the customized slipcover is suitable for Land Rover Defender Td4 from 2007 Material: 1000D nylon PU coatedWashable 30-60° C Available: in black for front and rear seats Bundle: 2x seat covers for the front seats and 1x cover for the complete rear seat Please select the desired variant. Please note:In the variant "front" 1 piece is delivered - driver and passenger side have the same reference. So if you want to order a cover for the driver and front passenger side, you have to order 2x the variant Front.