Current %

Reiseabenteuer und Roadtrips mit Kindern   Mit der Geburt des Kindes beginnt für die Eltern eine spannende Zeit voller kleiner Abenteuer. Doch deswegen die großen Reiseabenteuer verschieben? Das muss nicht sein, weiß Thorsten Dentges, selbst dreifacher Vater und Reise-Redakteur der Zeitschrift MOTORRAD. Von der ersten Idee bis zur Auswahl des passenden Reiseziels liefert er einen praktischen Leitfaden für junge Familien on tour. Ein Schwerpunkt liegt auf der Wahl des passenden Reisefahrzeugs: Caravan-Gespann oder Offroader, mit Rucksack und Öffis oder im vollausgestatteten Miet-Wohnmobil? Eindrucksvolle Reiseberichte und brillante Fotos runden diesen Band ab, der Lust darauf macht, mit den Kleinen ins große Abenteuer zu starten. Der ultimative Leitfaden für junge Familien on tour Mit Tipps für die Wahl des passenden Reisefahrzeugs Mit eindrucksvollen Reiseberichten, die Lust aufs Losfahren machen Erscheinungstermin: 29.04.2025 EAN: 9783613047594 ISBN-13: 978-3-613-04759-4 Erscheinungsjahr: 2025 Ausgabe: 1 Medium: Buch Seiten: 208 Illustrationen: 280 Einbandart: Broschur Format (BxH in mm): 170x240

Mit Allrad und Geschichte - abseits des Asphalts durch Portugal Portugal, beliebtes Reiseland mit Natur, Städten und Kulinarik. Fotograf André Poling und Autorin Sabine Weiß erkunden es in ihrem neuen Reisebildband. Sie folgen den Spuren der Tempelritter, die im 14. Jahrhundert in Portugal Zuflucht fanden. Sie erleben Offroad-Abenteuer und erkunden trutzige Burgen, Klöster und Ruinen. Ihre Route führt durch schroffe Berge, pittoreske Dörfer, die Einsamkeit des Alentejo, entlang der Atlantikküste und zur Algarve. Ihr Mitsubishi Pajero-Oldtimer, ein ehemaliges Feuerwehrfahrzeug, bewährt sich erneut. Inspiration, Tourenvorschläge und praktische Tipps - und vielleicht führt die Spurensuche sogar zum Heiligen Gral. Portugal abseits der ausgetretenen Touristenpfade erleben Offroadabenteuer und Reisebildband mit fantastischen Fotos Tempelritter, Eselspfade, atemberaubende Landschaften Erscheinungstermin: 29.04.2025 EAN: 9783613509764 ISBN-13: 978-3-613-50976-4 Erscheinungsjahr: 2025 Ausgabe: 1 Medium: Buch Seiten: 192 Illustrationen: 300 Bilder Einbandart: Pappband mit Überzug Format (BxH in mm): 230x265

Roof rack ExRoof for Volkswagen Caddy V Standard, Cargo, California & California Camper - L1 / SWB (year of construction 2020 to today) Roof rack uses the original mounting points, no drilling required Compatible with all VW Caddy V L1 variants (Caddy V & Caddy V Cargo) Rubber pad between roof rack base and vehicle to protect against corrosion Two individual roof rack feet provide stability in a lightweight construction Many practical accessories available Dimensions: 1698 x 1350 mm (platform)   The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any number of add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Volkswagen Caddy V Standard, Cargo, California & California Camper (L1 / SWB) with short wheelbase is made of powder-coated aluminum and therefore weighs just 32 kg. With a size of 1698 x 1350 mm, the ExRoof platform gives you enough space to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Technical data: Dimensions: 1698 x 1350 mm (platform) Weight: 32 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions Installation info:   For the following model variants, the OEM railing of the vehicle must be removed before fitting the roof rack platform:   Caddy V California Caddy V California Camper Caddy V Life Caddy V Dark Label Caddy V Style Caddy V Family Caddy V Edition Caddy V PanAmericana Caddy V Cargo Edition Caddy V Cargo PanAmericana Attention: Not compatible with VW Caddy V Maxi variants    

ExRoof roof rack for Volkswagen Amarok (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any attachments can be attached using sliding blocks. The ExRoof roof rack for the Volkswagen Amarok is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   Practical accessories such as eyebolts, roof tent quick-release fastener, awning bracket & more are also available for the ExRoof roof rack.   Product highlights Roof rack uses the original mounting points, no drilling required Compatible with Volkswagen Amarok (from model year 2023) Aerodynamic deflector is included in the scope of delivery Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack feet + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions    

ExRoof roof rack for Peugeot Expert L2, Citroen Jumpy L2, Opel Vivaro L2 & Toyota Proace L2 The ExRoof roof rack is your perfect everyday companion. Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The horntools ExRoof is made of powder-coated aluminum and therefore weighs only 40 kg. With a size of 2400 mm x 1500 mm x 49 mm, you have enough space to store your accessories.   Attention:   Only suitable for vehicle variant with hinged doors.   Technical data: Material: Aluminum 6063 Weight: 40 kg Surface: Powder coating Size: 2400 mm x 1500 mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution:   Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

ExRoof roof rack for Isuzu D-Max 2021 Double Cab (from year of construction 2021)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.  

ExRoof roof rack for Volkswagen® Amarok Double Cab (from year of construction 2010 to 2022)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20 kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.   The manufacturer responsible for the modifications/conversions is horntools GmbH, not Volkswagen AG. Volkswagen AG accepts no responsibility or liability for any negative effects that may occur as a result of the modifications to the vehicle.    

ExRoof roof rack for Mitsubishi L200 (from model year 2016)   The horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: Material: Aluminum 6063 Weight: 20kg Surface: Powder coating Size: 1600mm x 1250mm x 49 mm Scope of delivery Base carrier Roof rack feet Fastening material and installation instructions Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary. The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

Ideal carrier system for off-road use and for tradesmen Off-road use with the Ford Ranger requires particularly stable mounts, as the vehicle is exposed to higher forces. We have built the platform for the Ford Ranger / Raptor with this in mind. You have sufficient space and fastening options for attaching load securing devices or bolting on practical roof rack accessories. Heavy loads on the roof of the Ford Ranger can therefore be positioned anywhere on the roof rack platform and securely lashed down. Both across the roof and in the direction of travel. Roof rack uses the original attachment points, no drilling required Compatible with Ford Ranger (XL, XLT and Tremor from 2023), Ford Ranger Raptor (from 2023) and VW Amarok (Entry, Style and Life from 2023) Aerodynamic deflector is included in the scope of delivery ExRoof roof rack for Ford Ranger & Raptor (from model year 2023) The innovative horntools ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, any add-on parts can be attached using sliding blocks. The ExRoof roof rack for the Ford Ranger / Raptor is made of powder-coated aluminum and therefore weighs just 33 kg. With a size of 1400 x 1280 mm, you have enough space on the ExRoof platform to mount a roof tent, transport boxes, tools and other accessories on the roof of your vehicle.   This Ford Ranger roof rack is also very popular with tradesmen. If the loading area of the pick-up is no longer sufficient for tools or other transport items, toolboxes or ladders can be safely stowed on the platform.   Technical data: Dimensions: 1400 x 1280 mm (platform) Weight: 33 kg (roof rack + roof rack platform) Surface: RAL 9005 powder-coated Scope of delivery: Roof rack feet Roof rack platform Wind deflector Fastening material and installation instructions

ExRoof roof rack for Ford Ranger Double Cab (year of construction 2016 to 2022)   The ExRoof roof rack is your perfect everyday companion! Thanks to its all-round profile rail, add-on parts can be attached using sliding blocks. The ExRoof is made of powder-coated aluminum and therefore weighs only 20kg. With a size of 1600mm x 1250mm x 49 mm, you have enough space to store your accessories.   Technical data: - Material: Aluminum 6063 - Weight: 20 kg - Surface: Powder coating - Size: 1600 mm x 1250 mm x 49 mm   Scope of delivery - Base carrier - Roof rack feet - Fastening material and installation instructions   Caution: Static load capacity: 300 kg Dynamic load capacity: 100 kg   The dynamic load capacity is not the manufacturer's approval. The manufacturer's load capacity must not be exceeded. The static load indicates the load capacity when stationary.   The dynamic load capacity refers exclusively to paved roads. The load must be evenly distributed over the entire surface.    

Loading roller for ExRoof roof bars from Horntools The loading aid makes loading your roof rack child's play. Whether ladders, planks or other long goods, the loading aid simplifies your work.   The ExRoof loading aid is attached directly to the ExRoof platform using sliding blocks.   Technical data:   40mm loading roller Stainless steel shaft, resistant to scratches & rust Weight: 2kg Powder-coated

Awning holder, 2 pieces for Horntools ExRoof roof rack  Attaching an awning to our ExRoof roof rack is now even easier!   With this awning bracket, you can easily attach your awning to your roof rack.   Scope of delivery: 2 piece awning bracket

Rubber moulding for ExRoof roof rack The rubber moulding is suitable for every T-slot of the ExRoof roof rack, except for the HEXSLIM model (all-round frame) on the underside.   It acts as a wind deflector at the front and thus reduces noise. It also acts as an anti-slip insert on the surface to stow loads such as transport boxes more securely. The rubber moulding must be cut into pieces for installation on the ExRoof in the direction of travel.   Technical details:   Length: 146 cm

Roof rack support set for universal use Quick attachment and removal thanks to Velcro fastening system Made from high-quality, water-repellent materials Ideal for outdoor use Suitable for all commercially available roof rack platforms or crossbars - regardless of brand Can also be fixed at the front and rear with an eyebolt High-quality roof rack pads for unique adventures Made from high-quality materials, our roof rack pads guarantee durability and comfort when travelling.   Complete set for comprehensive protection The set includes hard-wearing roof rack pads including eyebolts for fastening, which offer comprehensive protection during transport. The support pads protect your equipment from scratches and dents and ensure safety on every journey.   Versatile and comfortable Ideal for transporting your SUP, kayak, skis, canoe or snowboard. Also very suitable for craftsmen, for transporting ladders, wood or other long goods.   Technical data: Material: Canvas cover and EPE foam padding Product dimensions: 600 x 85 x 95 mm (L x W x H) Weight: 0.5 kg Scope of delivery: 2 x roof rack supports 4 x eyebolts + fastening components 1 x transport bag Instruction manual

Notebook, not lined DIN A5 / DIN A 6 Isn’t it great that certain things simply resist going digital? The good old notebook is such an item and it still does its job reliably and charmingly, in everyday life or when traveling. These notepads in formats DIN A5 (spiral pad, 80 pages, not lined, cardboard cover) and DIN A6 (thread-stitched, 48 pages, not lined, cardboard cover) perfectly match our practical and stylish notebook organizers.

Notebook bag for on the go Isn’t it great that certain things simply resist going digital? The good old notebook is such an item and it still does its job reliably and charmingly, in everyday life or when traveling. Our sturdy and stylish notebook organizers are perfect covers for DIN A5 or DIN A6 size notepads as well as documents, ID cards, car papers, hunting licenses and so much more. Sewn-in elastic bands hold pens and other utensils and there are also securely fastened loops inside and outside (for carabiners etc.) as well as a Velcro patch for even more functionality. Finally, a high-quality all-round zipper ensures that nothing gets lost on the go. The sleeves for DIN A5 and DIN A6 notepads are available in either gray coyote made from robust Cordura laminate or our very own CORLODA®, a gray, laminated loden fabric made from real wool. The notepads in formats DIN A5 (spiral pad, 80 pages, not lined, cardboard cover) and DIN A6 (thread-stitched, 48 pages, not lined, cardboard cover) can be ordered separately here.  

NOLDEN 7-inch Generation 2 Bi-LED headlights for Toyota LandCruiser HZJ NOLDEN 7" Bi-LED Generation 2 main headlight kit with two headlamps with low-/high-beam and insulating strip for Toyota HZJ. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Toyota HZJ / "Buschtaxi". Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, Jeep Wrangler JK/TJ/CJ, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

NOLDEN 7" Bi-LED main headlights Generation 2 for Land Rover Defender NOLDEN 7" Bi-LED main headlight kit Generation 2 with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price per pair! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

Compact rechargeable tyre pump The OSRAM TYREinflate 2000 is a rechargeable tyre pump with a digital backlit display for easy and accurate pressure measurement and inflation of tyres, showing pressure values in BAR, kPA and PSI. The OSRAM TYREinflate 2000 has an internal memory and, thanks to the memory function, up to four different values can be programmed and stored for different tyres. It is also equipped with an auto-stop function: the OSRAM TYREinflate 2000 stops automatically when the preset pressure is reached. Thanks to the USB cable supplied, the OSRAM TYREinflate 2000 is rechargeable and no 12V socket is required for the power supply, so it is not only used for inflating car tyres, but can also be used for inflating bicycle, scooter and motorbike tyres. Thanks to its lightweight and compact design, the OSRAM TYREinflate 2000 is ideal for travelling and can be taken almost anywhere. Simply stow it in the glove compartment of your car, a bag or a rucksack using the storage bag supplied. A bracket for mounting and storage on a bike is also included. Thanks to the power bank function, the OSRAM TYREinflate 2000 can also be used as a charger for electronic devices such as your mobile phone. In addition, the integrated torch function can provide illumination at night or in poor lighting conditions. The scope of delivery also includes a 2-piece adapter set that can be used as a connection for bicycles, balls and other inflatable objects with Presta valves. OSRAM grants a 2-year guarantee* on this product   Product information       Charging time: approx. 3 hours Inflation time: <2min 0-5.5bar bicycle tyre Tube length: 14.5cm     Units of measurement: PSI, kPa, bar Maximum pressure: 120 PSI, 8.3 bar Accuracy (bar): 0-1.5 PSI / 0.10bar     Mains cable length: N/A Display size: 30x155mm  Flow rate (1/min): N/A     Electrical data       Power supply: USB Cable Nominal voltage 3.7 V Nominal power 67.00 W  Rechargeable battery (5200 mAh)  Dimensions & Weight       Length 70.0 mm Height 170 mm Width 70.0 mm Product weight: 500g   Additional product data       Display type Digital Noise level (dB) 83 dB Fuse 18 A   Recommended area of application Bicycles, motorbikes, cars Accessories:Adapter for bicycles & small inflatable sports equipment. USB charging cable, power bank system, LED light, storage bag, bike holder  

Der Reisebleiter für deine unvergesslichen Offroad-Trips! Dieses Buch enthält die besten Reiseberichte und Bilder der MATSCH&PISTE-Leser, begleitet von wertvollen Insider-Informationen aus den bereisten Ländern. Wer Lust bekommen hat, mit dem eigenen Offroader auf Tour zu gehen, der bekommt von der MATSCH&PISTE-Redaktion die wertvollsten Ratschläge, um sich und sein Fahrzeug optimal auf das Reisen vorbereiten zu können. Die Experten verraten, wie die perfekten Pisten gefunden werden können, versorgen die Leser mit essenziellen Ausrüstungstipps, erinnern an unverzichtbare Papiere und zeigen, wie sich gut vorbereitet ins Offroad-Abenteuer gestürzt werden kann. Ratgeber und Reisebericht in einem. ISBN: 978-3-613-50971-9 Herausgeber: ‎Pietsch-Verlag Einband: broschiert Seitenzahl: 192 Abbildungen: 220 Bilder Format: 170mm x 240mm

Ratgeber für Offroad-Fans Seit Jahren führen Geländewagen und vor allem Sport Utility Vehicles, abgekürzt SUV, die Zulassungsstatistiken an. "auto motor und sport"-Redakteur Torsten Seibt gewährt einen Überblick über die besten Geländewagen, SUV und Pickups der vergangenen Jahre und zeigt, wie man beim Kauf der passenden Gebrauchtwagen nicht nur bares Geld spart, sondern auch den ökologischen Fußabdruck dieser häufig kritisierten Fahrzeug-Kategorie senkt. Echte Ressourcenschonung und Nachhaltigkeit stehen bei dieser Buchreihe im Vordergrund, ohne dabei den Spaß am Autofahren und die Funktionalität im Alltag aus den Augen zu verlieren. Herausgeber: ‎ Motorbuch; 1. Edition  Sprache: ‎ Deutsch Gebundene Ausgabe: ‎ 208 Seiten ISBN‏: ‎ 978-3613046450 Abmessungen: ‎ 17,5 x 1,9 x 24,4 cm

Bellota shovel with short handle If it doesn't fit, we make it fit – no messing around. Our versatile, high-quality shovel for off-road and outdoor use in its original state was too long for comfortable transport in the vehicle and that's why we simply shortened the shaft. The shovel now matches the US Army standard length of 1.04m (3ft 5in).The spade shovel from top manufacturer Bellota has all the advantages of a Jeep shovel, i.e. a pointed blade with treads and a practical D-shaped grip. Thanks to the shortened shaft, it can easily be transported in or on your vehicle so that it is always ready to hand when digging in camp or off-road situations is required. The pointed Bellota shovel blades, including the collar, are stamped from a single piece of steel and are heat-treated for extreme strength and a long service life. The steps on the blade are designed for heavy digging work thanks to their size and robustness. Moreover, the choice of materials and the ergonomic design enable easy and back-friendly work in both loose and hard ground. Especially the hollow fiberglass shaft is ergonomically ideal as it weighs less than a wooden one and is more flexible. The extra-wide, comfortable D-handle with soft-touch material makes work even easier. Overall, the 1.04 m long shovel weighs only approx. 2 kg.If you are looking for a shovel that is compact enough to permanently stay in your car, you will find the 68 cm long Bellota Jeep shovel with a short wooden shaft here. Here is the 68 cm long Bellota Jeep shovel with short wooden handle. Material:Hardened steel, fibreglass, polypropylene Total length:104cm Shovel blade dimensions:W23cm x H30cm Weight:2.2kg Please note:The shovels are coated with a protective lacquer / transport lacquer.Any flaws or unevenness in the protective coating cannot be recognised as grounds for complaint.

Winter is coming and our super-warm ¾-length Nakatanenga winter socks are the perfect preparation for cold, wet and action in snow and ice. There’s an endless discussion amongst athletes and outdoor specialists what’s more important, shoes or socks, but fact is that the right choice of socks is key to comfort, health and performance, especially in the cold season. What good are the best of boots when your socks are not warming you, stay constantly damp and clammy or rub and chafe? Our warm Nakasox for winter feature the same combination of natural Merino wool and synthetics as our lighter summer or 3-season socks. Especially in winter, thermal regulation is most important. Merino, the supersheep’s natural air conditioning system, does a fantastic job even during highly demanding activities like snowboarding or skiing. The fleece fibers’ microstructure allows for fast wicking of moisture and efficient condensation. Sweating is reduced and hence the dangers of hypothermia. The warm and dry Nakasox-feeling is further enhanced by the general comfort provided by the material’s touch and feel. Merino doesn’t itch and its antimicrobial properties also mean that your socks don’t smell as easily (or quickly) as with other materials. Especially when wearing them in boots or for sports activities, a perfect fit and elasticity are what you’re looking for in a sock. A special combination of performance synthetics and the anatomical design mean that Nakasox will stay in perfect shape even during and after heavy mechanical stress. Soles and heels are padded and a thinner weave between bridge and shin make vertical movements as in hiking or cross-country skiing more comfortable. Well-fitted and elastic socks don’t slip and slide and give your feet a better overall fit inside your boots. After long and action-packed days in the mountains, the probability that you’ll experience chafing and blisters is greatly reduced. Customer feedback is already telling us how extremely warm our Nakasox actually are. Men are by and large more tolerant to cold temperatures, making these Nakasox ideal for more stationary winter activities, like ice fishing. Women on the other hand will appreciate the super toasty socks in everyday situations like winter walks or even at home on the couch. Colors:grey-coyote Material:57 % Merino Wool, 27 % Polypropylene, 8 % Elastan, 8 % Polyamide For hygienic reasons, this item is generally excluded from return.

KAMPA Glow-in-the-Dark peg set Are you a passionate camper who also wants to create a safe and comfortable environment at night? Then the Glow in the Dark pegs from KAMPA are just the thing for you! KAMPA, a renowned name in the camping industry, presents its innovative pegs that glow in the dark. These pegs are not only practical, but also a real highlight (!) for every camping adventure. The Glow in the Dark pegs from KAMPA are made of a special phosphorescent plastic in the upper part. This absorbs light during the day and emits it again in the dark. This means you can easily see your pegs at night and avoid unpleasant tripping hazards. These pegs are not only luminous, but also extremely robust and durable. They are made of high-quality material that can withstand all weather conditions. Whether rain, snow or sunshine, the Glow in the Dark pegs from KAMPA retain their luminosity and stability. The Glow in the Dark pegs from KAMPA are also very easy to use. Simply stick them in the ground and they are ready to guide your way in the dark. They are also lightweight and compact, making them the perfect accessory for any camping adventure. Experience safety and comfort even at night. The phosphorescent peg set from Kampa consists of a total of 14 glow pegs with a length of 23 cm. They are also suitable for hard or stony ground.The scope of delivery includes the practical box, 14 phosphorescent pegs and a pull rod for easy removal.

Camel Trophy - 1.000 Meilen Abenteuer - Die ultimative Geschichte. Mit einem Vorwort von Volker Lapp Die Camel Trophy war lange Inbegriff für das »grenzenlose Abenteuer«. Zwischen 1980 und 2000 führte sie mehr als 500 Teilnehmer aus 35 Ländern an die spektakulärsten Orte der Welt. Dabei fuhren die Teams speziell vorbereitete Land Rover und brachten diese in den rauesten Umgebungen an ihre Grenzen. Als Teil des offiziellen Fotografenteams sammelte Nick Dimbleby jahrelang atemberaubende Bilder von Land Rover-Konvois im Dschungel und den Menschen hinter den Kulissen, aber auch zahlreiche unvergessliche Geschichten. Outdoor-Legende Volker Lapp sorgt für den passenden Rahmen und macht Dimblebys Chronik zum ultimativen Buch über die Camel Trophy. ISBN: 978-3-613-04584-2Titel-Nr.: 04584Einband: SchutzumschlagSeitenzahl: 352Abbildungen: 800 BilderFormat: 235mm x 285mmErschienen: 06/2023

Driving off the Road. Wie du richtig im Gelände fährst - Die Geländefahrschule für Offroader: Grundlagen, Fahrtechniken und Tipps Mit dem Besitz eines Geländefahrzeugs geht für immer mehr 4x4-Fans ein Traum in Erfüllung. Um gut und sicher durchzukommen, ist es jedoch wichtig, sich mit dem eigenen Fahrzeug vertraut zu machen, Abmessungen, Lenkverhalten und Antriebstechnik zu kennen und ein Gespür für sein Fahrverhalten zu entwickeln. Denn jeder Geländetyp erfordert besondere Fahrtechniken: Vom Fahren durch Wasser, Schlamm, Schnee, über Baumstämme bis hin zu Kies, Geröll und steilem Gelände zeigt dieses Buch durchgehend bebilderte Anleitungen. Mit Tipps zur Pannenvermeidung und sicheren Fahrzeugbergung. ISBN: 978-3-613-50923-8Titel-Nr.: 50923Einband: broschiertSeitenzahl: 208Abbildungen: 400 BilderFormat: 170mm x 240mm

BIC Lighter Mini or Slim with Nakatanenga Cover A lighter should produce a flame quickly and reliably and under any circumstances, especially during outdoor activities. Gas lighters using a friction stone are your most reliable option, certainly when compared to those with a click mechanism, as these often jam or break. For many campers, backpackers or survival experts, the lighters of choice have long been the small and light MINI or SLIM editions from BIC. They are robust, ingeniously simple in design and always work - as long as there is some gas left in the tank. Our plastic cover with the Nakatanenga logo protects against accidental emptying (or ignition) of the lighters in your trouser pocket or backpack. Simply place the BIC head first in the protective case and the gas button can no longer be pressed. In addition, the sturdy case also protects your BIC from water or dirt, so it's always ready to go when you need it. Available in khaki including one BIC MINI or BIC SLIM. Note: BIC lighters are delivered in different colours, randomly!  Colour not selectable!

Always with a leash There are basically two ways of managing our hectic day-to-day lives: one is to always think of everything before you go out or when plans change: keys, phone, wallet and all the other stuff. The other far better solution is to have backups handy, in case you do forget – as you will. Our “Always-on-you” dog lead belongs in the second category. It is so small, light (and affordable), that it’s probably best to own several of them and always have one handy wherever they’re needed, in your car, handbag or coat pocket. That way, you always have a leash with you when you’re out and about with your dog. The lead is 1.6 m long and is made from extremely strong polyamide fabric (max. pull force 315 kg). It is 100% Made in Germany, and as always with products from our own textile workshop, we take care that the highest quality workmanship is applied in manufacturing – in this case, the leash is even made to military spec TL8470-0071. The aluminum karabiner, with its firm snap gate and the 360°- swivel is firmly sewn into the strap. Leash and karabiner hook combined are smaller than a packet of tissues and not much heavier. Always handy, “always-on-you”. Weight: 0.039 kg

Multifunctional cloth by Nakatanenga This multifunctional cloth is reminiscent of a Kufiya / Shemagh which has its origin in the Middle East. Once the cloth was intended as protection against sun and sandstorms in the desert. Today, the cloth has many more uses, e.g. for motorcycling, as a picnic cloth, as awning, cover the steering wheel in high heat, scarf and more. Compared to other towels, we have opted for a slightly larger version. As a result, the possible uses expand enormously. material: 100% cottonDimensions: 120x120 cmWashable: 30 ° C Available in the following color variants: Coyote Gray Black Gray Please wash before use!

Battery box with various connections, with solar panel Optionally with AGM or LiFePo battery In the 21st Century modern technology is everywhere, even off-road and off the grid, but more often than not there is no power when you're out and about on some trail in some country. One option is the classic cigarret-lighter as a power source, but in using this frequently you risk decharging your battery to a point where it won't start your car anymore. Another option would be a generator, but those are loud, impractical and noisy. To solve this probem highly portable powerbanks were invented, but for a multiple day long trip a small powerbank just won't cut it. So, what if you had a lagre but portable power bank? One you could simply charge, even off the grid, maybe with a solar panel? And one that is heavy dut enough to endure week long trips and years of use ?  Hold on, that's exactly what we did! This compact, but long-lasting Powerstation (33Ah) offers a cigaret lighter-output and two USB-ports (5V - 2.1A), in a roubust shell. It can simply be charged using our solar panels by Optimate. LiFePo4 batteries – with their lithium iron phosphate cathode material – are perfect for running your camping or work utilities on the road, especially in conjunction with our mobile battery boxes. Unlike your conventional AGM lead-acid technology, the lithium battery combines vastly superior charging/discharging qualities with extremely low weight and small volume, respectively, and a long service life. LiFePo4 batteries tolerate deep discharging without problems, unlike AGM batteries which will suffer irreparable damage when repeatedly discharged beyond 50%. Unless you require the greater tolerance for extreme cold in AGM’s, you should definitely consider the higher initial costs of LiFePo4 batteries and compatible chargers. Enormous weight and space reductions, the long life-cycle and the hassle-free charging and discharging of the battery are strong arguments for the investment. And last but not least: LiFePo4-technology is extremely safe. robust shell portable design comfortable handle 20 A car-fuse 33 Ah (396Wh) AGM brand battery optionally 35 Ah LiFePo battery 2x USB-plug (out) 1x cigaret-lighter (out) 1x SAE junction box for charger (charger not included) (in) 1x On-/Off-switch  simply plug in and off you go Scope of delivery: 1 x Optimate solar panels in a choice of 40, 60 and 80 watts, including bag and stand.1 x Optimate charge/monitor controller, including weatherproof battery cable1 x Nakatanenga battery box selectable in 4 colours, with different connections

The Landy brings the Easter egg Have you ever thought about what kind of car the Easter Bunny drives around in? It can only be a Defender, really, when you consider all the Easter eggs that need to be delivered across the land. After numerous sightings, we are pretty convinced of this theory and that’s why we offer our completely handmade and 100% sustainable, all- wood cutout Defenders as classy Easter decorations. You can put them up for Easter egg hunts or hang them from traditional Easter egg trees. The Easter Landies on their tree stand are handcrafted at our HQ in Berg – from plywood and homegrown trees. That makes them not only Made in Germany but also Made in Bavaria. The four-part set with Landy, egg background and stand is assembled as quickly as it is stored away for next year’s Easter. Put some 4x4 fun into your next Easter egg hunt! Dimensions for set with branch: approx. 14x9x4 cm (HxWxD) Our creative workshop has also created a wooden landy for hanging. With hanger for the Easter bush, at home in the window or in the car. - Dimensions for hanger: approx. 3,5x6x0,4 cm (HxWxD) Tip: The individual wooden parts can be wonderfully coloured

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.