Tidiness and load securing
Airline mounting rail, screw fitting with M8 nut
Stable connection for your lashing rail - screw fitting with M8x45 Our screw fitting with M8 nut is the ideal solution for securely fastening accessories or loads to standard lashing rails. Thanks to its robust design, the fitting guarantees reliable fastening - even under high loads. Installation is quick and easy: the fitting is inserted into the lashing rail and securely screwed in place with the M8 nut supplied. M8x45 screw fitting, with nutMaterial: galvanized steel
Prices incl. VAT;
Nakatanenga Valuables Case - cubby box raise
Nakatanenga Valuables Case - cubby box raise Nakatanenga valuables case and cubby box raiser for all Land Rover Defender 90/110/130 (all MY), mounted beneath the cubby box / centre console, with hidden lock, optinally with switches, 12 V and USB sockets. Provides additional storage space for all the odds and ends, like sun glasses, mobile phones, purses or other valuables. As it is mounted underneath the cubby box and features a hidden lock, this storage safe is hard to notice and thus gives additional security. Other such cases often only offer space for a few documents, while our safe is large enough to hold items of larger size, cameras, mobile, navigation devices, money, glasses, etc. Usable interior space 43x26x14 cm. In this is the new and improved version of our popular CUSADE the sockets have been replaced by waterproof heavy-duty items. You can optionally have double-sockets (for USB-A and USB-C) to allow for more than one device to be connected simultaneously, or have three 20 A rocker switches pre-installed to operate in-car electronic devices such as air supply, fride, LED worklights etc. The different front panels are available individually, so that you can change your configuraiton at a later time. When using the suitable twist-lock plugs, the 12 V sockets securely lock the plug in place, which is an additional advantage e.g. in severe off-road conditions. In vehicles with interior bulkhead the case can only be opened a few centimetres as the cubby box will then foul the bulkhead. This case can still be used for shallow items. Comes with two keys (which can be reordered).
Prices incl. VAT;
Outboard Storage for Landrover Defender and more
Defender 110 side storage box When you go on big adventures, every bit of storage space is useful, which means that not a single centimeter should be wasted.Our storage box makes ideal use of dead space. Made entirely of stainless steel and powder-coated in black, the storage box is waterproof, lockable and the ideal container for salvage materials, rubber boots or tools. The box fits perfectly for the sides of the Land Rover Defender 110 (2-door), but also for e.g. a motorhome, long-distance vehicle or other expedition vehicles.The open flap is held at a 90-degree angle by two thin steel cables and thus serves as a storage surface for water canisters, for example, or even as a small breakfast table. Supplied complete with 2 keys and all fixing materials.Internal dimensions of the side storage box: 465 mm x 285 mm x 335 mmPlease note:This side storage box can only be installed in front of the rear wheel arch in hardtop versions. Merkblatt Edelstahl und Rost
Prices incl. VAT;
Tailgate Organiser for New Defender L663 from MY 2020, Rear Door
Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side. The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.
Prices incl. VAT;
Stainless steel lock for Nakatanenga side storage boxes SF HL DE / SF HT DE with 2 keys
Stainless steel lock for Nakatanenga side storage boxes Our first generation lockable storage boxes for the sides of classic Defenders were secured by round plastic locks. We now offer these security locks in a rustproof and durable stainless steel version, suitable both for replacement and upgrade. By the way, swapping the locks poses no problem whatsoever, as the new stainless steel versions have the same fit as the older Southco versions. New fastening material is also included. The lock comes with 2 keys. PLEASE NOTE: The lock only fits the older version of the storage box with a round lock.
Prices incl. VAT;
Universal bucket Capacity 25L and 50L
DABUCKET is da solution For what? How about: wet shoes, garbage, rubbish, dirt, charcoal, floor boards, sandbox toys, diaper pails, beach blankets, sports gear, camping dishes? DABUCKET - For everything that needs to be quickly and easily removed, stowed and transported on the way or at home, while remaining clean and tight. The idea behind our flexible DABUCKET all-purpose bucket is very simple. You can simply put dirt in your own packsack, the plastic bag or in the trash bag as a liner in the open DABUCKET, pull the closure tunnel up and pack it away safely. That is why we have designed the two variants DABUCKET to the size of standard garbage bags: with a height of 30 cm and bottom diameter 28 cm for a 25-liter bag and 45 cm to 36 cm for the 50 liters. The DABUCKET can be easily put on with the adjustable shoulder strap, conveniently loaded and unloaded with two handles, even when it is heavy, hanging on a hook or carabiner and can be quickly attached to keder rails, eg. from the roof tent, be edged. A large fleece area is used to fasten in the car or RV, a small flap for customization or labeling the DABUCKET with patches. 100% nylon PU coated means sturdiness, easy cleaning and no exposure to harmful plasticizers. washable at 30 ° C Dimensions 25 L: height 30 cm (without lock tunnel), bottom diameter: 28 cmDimensions 50 L: height 45 cm (without lock tunnel), bottom diameter: 36 cm Available in the following colors:Gray coyoteOrange-coyoteblack This item was designed, produced and tested in our in-house tailoring. A dedicated team and short distances enable continuous quality control and further development of our textile products. And if you already have a tailor's workshop in the house, then it is easy to accept customer requests for changes, special designs, suggestions and suggestions for improvement at short notice and to implement them as far as possible. Mail or call is enough!
Prices incl. VAT;
Accessories Dashboard Mounting Point for New Defender L663
Accessories Dashboard Mounting Point for New Defender L663 Practical mounts for cell phones, navigation devices, tablets, and other gadgets are indispensable, because even the latest cars with all their "connectivity" don't deliver everything an off-roader, overland explorer or ambitious camper requires. However, cheap plastic mounts are usually a waste of money and not everyone wants to stick suction cups to their windows either. Our mounting plates for the side handles on the dashboard of the New Defender are designed to support heavy duty mounts – like those from market leader RAM Mounts. The plate’s tight hold makes sure that nothing wobbles, collapses or falls off. But most of all, there are no suction cups involved as they tend to come loose when off-roading or speeding along bumpy dirt roads.The mounting plate is powder-coated black to match the interior of the new Landy and you simply fasten it with the existing screws of the handle. No drilling is required and removal is as easy as installation. Three strong, internally threaded 6 mm screw holes (M6) allow you to mount ball joints, brackets and other mounting equipment, either from RAM Mounts or other brands. In our bundle solution, the mounting plate comes with a 1-inch ball (type B) from RAM Mounts. Available with or without RAM Mount ball.
Prices incl. VAT;
Seat cushion for 48L Transformer boxes
Comfortable seat cushion suitable for 48L transformer box – Comfort Meets Function Turn your sturdy Transformer Box 48L into a comfortable seat or resting place – quickly and easily with our high-quality seat cushion. Also ideal for other surfaces. Why it fits so perfectly: The Transformer Box impresses with its smart design: it is made of durable HDPE, extremely resilient (static load capacity up to 800 kg for 48 L), and even when folded, it takes up minimal storage space. In addition, the contents can be accessed at any time via the practical front flap, even when stacked. The seat cushion turns any surface into a comfortable seat: with its 4 cm thick foam core, it ensures pleasant seating comfort, while the nylon PU-coated cover is robust, removable and washable – perfect for outdoor use. It can be easily secured using sewn-in loops that can be attached under the box lid. Colour options for the seat cushion: Grey Black Stone grey-olive Note: In order for the Transformer boxes to be used as seating, they require a matching wooden lid on which to place the seat cushion. A custom-fit plastic lid is also available to protect the wooden lid.
Prices incl. VAT;
2 lashing straps with automatic retractor
Double pack of lashing straps with automatic retractor in 50 mm or 25 mm Who doesn't know it? Whether it's a cool box, tool box or other load - such things are quickly secured with a lashing strap. Or at least they would be if the straps weren't in a big tangle.This is where our ratchet straps with automatic retractor come in - they are as easy to handle as safety straps: Simply pull them out to the right length and hook them in. After use, press the red lever and the webbing automatically retracts. The single rolled-up strap then makes a handy and neat package that can be neatly stowed away. The straps are great to use with our lashing rail stop points! Product features: Complies with EN 12195-2 tensile load: 300 kg maximum elongation: 7% Fittings fully galvanised Pointed hook CSH Belt length: 3 m strap widths: 25 mm and 50 mm Lashing strap 25 mm: SHF 25daN / STF 120daN / LC 300daN / AK LC 300daN X25 J37 LGF 0.16 m / LGL 2.90 m Lashing strap 50 mm: SHF 50daN / STF 150daN / LC 750daN / WK LC 750daN X25 J37 / LGF 0.29 m / LGL 2.76 m Scope of delivery: 2 belts Please note that these straps are only suitable for securing loads! Not suitable for securing persons or for lifting or recovery!Explanation:1 daN ≈ 1 kgSHF: Standard Hand Force = standard hand force / is the force that must be applied to tighten the ratchet (force of the user).STF: Standard Tension Force / is the force which is transferred from the ratchet as pretensioning force to the tensioning device (force of the ratchet).LC: Lashing Capacity - is the tensile strength/load capacity of the lashing strap - LC indicates the permissible lashing force for direct lashing. Scope of delivery: You will receive either 2x50mm or 2x25mm - please select the variant you require.
Prices incl. VAT;
Gearbox tunnel shelf R380 LHD
Transmission tunnel tray R380 LHD This transmission tunnel tray only fits Defender equipped with an R380 transmission, such as 300TDI or Td5.Moulded can holders, fitted with a neoprene insert, provide secure support for a wide range of standard drinks cans and bottles. No more pens and loose change disappearing into the depths of the dashboard. All these little things now find a safe place in this tray made of ABS plastic, which, thanks to its precisely fitting shape and the rubber lip all around, finds a stable hold on the gearstick lever base without any complicated assembly. This cardan tunnel tray ensures that you always have loose change, pens, mobile phone or torch to hand.
Prices incl. VAT;
Side Box for Land Rover New Defender from 2020, right side
Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg
Prices incl. VAT;
Nakatanenga sun visor organizer for Land Rover NEW DEFENDER from 2020, various colors
Sun visors in your car offer few functions beyond the obvious: make-up mirrors for female passengers, maybe, or flimsy card holders for permits, IDs and similar items. We’ve been offering our popular and very successful universal visor organizers for quite some time now and they are the perfect solution to stack the humble visors with additional functions. If you are looking for great, custom-made organizers for both visors in a New Defender, look no further. Simply slip them on, fasten the Velcro straps, done! MOLLE mesh enables you to attach any MOLLE cases or similar compatible accessories. The bands can also hold sun glasses, pens or small flashlights. Two zipper pouches are perfect for all smaller items that are easily lost: coins, keys, remotes, swipe cards and a lot more. A great place to keep your vehicle documents, parking permits etc. is the dedicated slot on the side of the visor. And to top it all off, our textile studio has worked a lot of Velcro fleece into the organizer so that you can attach all kinds of smaller items. The trusted Nakatanenga sun visor organizer is tidy, versatile and allows for quick access to everything that’s important inside a New Defender! Available in the colors black, gray and coyote. Delivery in pairs for driver and passenger side.
Prices incl. VAT;
MOLLE Organizer in various Sizes
Modular vehicle panels, incl. Fastening material Are you familiar with that? The Cubby Box overflows, the glove compartment is tiny and long before the car approaches the tipping angle, everything slips or flies through the area, which was "quickly" somewhere stored. Stop it! The modular, MOLLE-compatible panels for seats, headrests and sun visors give everything that must remain within reach within a short time, its place in the vehicle. They expand the existing storage space enormously, are customizable and flexible and can be optimally combined with our MOLLE bags, our tensioning and fastening straps or the Quickfists for attaching heavy objects. The panels are available individually or as a set with our MOLLE bags. Material: PE plastic Available in: 3 X 3 (suitable for headrest - 17,5x15 cm)5 X 3 (suitable for sun visor - 27x15 cm)11 X 9 (suitable for vehicle seat - 57,5x37,5 cm)11 X 9 with bag set11 X 9 with bag set and first aid bag Please note:Quickfist, gloves, ax and our Funky Chicken are shown in the photos - these are NOT included in the delivery! Special designs, suggestions and proposals for improvement will be implemented as far as possible. Mail or call is enough!
Prices incl. VAT;
CargoBear storage rack, interior rack for New Defender 110, from BJ 2020
CargoBear storage rack for Land Rover New Defender L663 The more space you have, the greater the temptation to simply deposit your gear all over the place. With a cargo giant like the new Defender 110 (from MY2020), this will inevitably lead to chaos. That's why we’re putting a bear in the cargo area, a small CargoBear. This additional shelf with its generous dimensions of about 860 x 525 mm takes a load of about 50 kg and is intended for heavier equipment, tools etc. As with the CargoBear roof rack, the cargo shelf is made of robust, powder-coated and perforated aluminum. Raised edges, anti-slip surface and a variety of lashing points make it very easy to ensure one hundred percent load security. By the way, the angled design of the supports leaves approx. 640 mm of loading height under the CargoBear rack. This means that even larger items such as boxes etc. can still be stowed without a problem. When mounting the shelf, all you need to do is fastening it to the existing attachement points of the trunk cover with the original screws. Only the hooks on the original trim have to be removed – making installation or removal a matter of minutes. - Material: aluminum, black powder-coated- Max. Load capacity: up to 50 kg Please note: The storage rack is NOT suitable for the 90, 110 Defender with 7 seats (as the belt system blocks the side panels), 130.
Prices incl. VAT;
Rear storage compartment for Cubbybox in Land Rover Defender 90/110/130
Rear storage compartment for Cubbybox in Land Rover Defender 90/110/130 Storage compartment for mounting on the rear of the cubbybox in the Land Rover Defender 90/110/130, dimensions: 265x232x133 mm (WxHxD), colour: blackThe storage compartment is screwed to the rear of the original or aftermarket cubbybox of the Land Rover Defender and offers space for maps, CDs, bottles and numerous other things that want to be stored in the cockpit of the vehicle.The product is compatible with our valuables compartment and parking heater console. Foot space for rear seat passengers is restricted in the Cubby Box area. Delivery without Cubby box.
Prices incl. VAT;
Bag for sand sheets, recovery aid
Bag for sand sheets Sand ladders, traction boards, foldable ramps or waffleboards – the range of recovery tracks for 4x4s these days is extremely specialized when it comes to different types of use, materials or surface conditions. No matter which kind of board you’re going for, though, there’s always two questions to keep in mind, whether your tracks are made from metal, synthetics or rubber: For one, where are you keeping them, before and after deployment or in seasonal storage? And two, how do you keep your vehicle clean, if you chose to transport the tracks inside the trunk or cargo hold instead of an outside mount? Our Nakatanenga board bags will conclusively solve both issues. Whether it’s our own Maximum Traction boards, GFK Waffle Boards, aluminum sand ladders or any other product from MAXTRAX, TREDS, HEBE etc., the bag will fit any recovery board up to a maximum size of 1200 x 340 mm. With its depth of 130 mm at the sides, the bag is specifically designed for synthetic boards and their greater thickness when compared to classic metal sand ladders. However, the wide cut of the bag allows for a stack of boards of up to 180 mm in total. Inside the bag, we have sewn-in two adjustable straps with quick-release buckles to secure stacks of boards and prevent any sliding or shifting. The fabric is made from robust 100% PU-coated nylon to ensure quick cleaning by brush or water hose. It is also machine washable at 30 Celsius. Strong seams, sturdy straps and durable zippers are, as always with our own textile products, a given. There’s also a MOLLE fleece patch to identify your kit with patches, stickers or tags. Color: BlackGrey CoyoteCoyote Material:100% PU-coated Nylon Dimensions:L 1200 x W 340 x D 130 mm The wide cut will ensure that a stack of boards of up to 180 mm in total will fit inside the bag.
Prices incl. VAT;
Nakatanenga drawer system for Defender Td4 & Td5/Tdi
Lockable drawer system for Defender Td4 & Td5/Tdi - stable, spacious & well thought-out From storage space in the vehicle you can never have enough. And lockable storage certainly not! This new drawer system for the Td4 and Td5 / Tdi consists of a spacious aluminum drawer with galvanized slide rails, two removable partitions and a robust cover plate. The drawer fits between the wheel arches and is covered by the cover platform. Your vehicle is on a slippery ground? In contrast to other vehicles, the drawer does not click on again - thanks to the locking of the sliding strips at half and full length! The drawer system is suitable for Defender Td4 and Td5 / Tdi. Depending on the type of vehicle (Td4 or Td5 / Tdi), the cover varies in size. Dimensions: Drawer (outside, incl. Front panel): length 1,010 mm, width 745 mm, height 190 mmDrawer (inside): length 965 mm, width 645 mm, height 165 mmTD4 cover (basic dimensions): length 1,110 mm, width 1,145 mmTd5 cover (basic dimensions): length 1.110mm, width 905mm Mass: Drawer: 25 kgCover: 9 kg Material: Drawer: high-quality aluminum, surface black powder-coatedHeavy duty rails: steel, galvanizedDoor lock / handle plate lock: stainless steel (V2A) Delivery: 1x drawer (aluminum) with ...... 2x demountable partitions... 2x heavy duty rails (galvanized)... 1x door lock / handle plate lock (stainless steel)1x wooden cover (covered with felt)Further product features: 180 kg support loadLocking: Half and full length (vehicle is wrong? No problem!)Theft protection: lockable door lock This drawer system is suitable for all 90 and 110 Station Wagon models.
Prices incl. VAT;
TACV Modular vehicle panel for Ineos Grenadier, rear door inside, 2-piece
Molle panel for the two rear door windows inside / Ineos Grenadier - damage-free installation without drilling The aluminium window panels are simply attached to the inside of the windows using suction cups and are compatible with all Molle products in our range. The possibilities for combination and personalization are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, these modular panels make it possible. FixPlus Straps are also a good addition. And if you don't need the panels at the moment or if you sell the trolley, you can dismantle them without leaving a trace. Material: ALUMINIUM, black powder-coated Scope of delivery: 2 vehicle panels, incl. fastening material (suction cups)
Prices incl. VAT;
Mounting kit for Nakatanenga drawer system
Complete Installation Kit for the Nakatanenga Drawer System The right attachment kit for our Nakatanenga drawer system for the Defender. Delivery: 4 holders4 screws M8x20 Linsenkopf hexagon socket8 nuts M8 self-locking12 body washers No additional holes need to be drilled, as the existing 4 holes of the lashing eyes can be used (the lashing eyes must be unscrewed for this).We will be happy to advise you: ☎ +49 9181 466 644
Prices incl. VAT;
Cargo Rail Nut 2.0
Cargo rail nut 2.0 available in size M8 and V4A precision casting and thus best suited for exterior use. The nut is held securel in place with the stainless clip and can stay in place all the time. This makes it interesting for interior use, too, e.g. when fixtures have to be removed temporarily from the vehicle and will be fitted to the same place again. There are no protruding bolts, the nut can stay at its place, fitting is facilitated as the clip can cope with lateral force before fully tightening down, too. Once torqued down, the ribbed outer of the nut tightly grabs into the cargo rail, preventing any twisting or movement under load. The cargo rail nut 2.0 allows flush fitting of optional equipment and fixtures as the nut sits level with the rail and does not protrude above it. Additionally the clip acts as a washer, thus increasing the contact area, expecially in the rounded version of the airline cargo rails, while also protecting painting/anodisation. Four markers facilitate to mark the drill centre. Advantages: rustfree - nut made of high-quality V4A precision casting, clip of stainless EN 1.4310 steel simple handling - fit nut, secure with clip, bolt on equipment innovative - can be fitted to ANY part of the cargo rail and doesn't have to be pushed in from the side nut sits level and does not protrude - equipment can be bolted on flush secure - sits securely in the rail and stays where it was fitted - does not get out of place, even with nothing bolted to it. Markers in the clip to facilitate drilling, clip acts as a washer.
Prices incl. VAT;
Quick Fist Tool Fixing (8 pieces)
Quickfist mounts - secure fastening for every situation Quick Fist Kit, economy set with 8 Quick Fist mounts (2x Quick Fist Mini-I, 4x Quick Fist Standard, 2x Quick Fist Super) - your price advantage: approx. 10%Quick Fist mounts ensure that equipment remains securely and stably fixed even on bumpy rides or in challenging terrain. The choice of different sizes and their impressive load capacity make them suitable for a wide range of applications.Made from corrosion-resistant materials, they retain their elasticity even in extreme temperatures - ideal for use in adverse conditions. Whether for off-road adventures, camping trips, outdoor use or in the workshop at home - Quickfist mounts offer flexible and reliable solutions for securing your equipment.Please also visit our Quickfist - produkt page and find out about different uses for these clever clamps.
Prices incl. VAT;
Anti seize paste, 250g
High-performance assembly paste 250 g - for brakes, threads & metal connections 1x Anti seize paste for universal use, 250 g. heat resistant up to 1100 ° C, high pressure resistant and lead free prevents corrosion and galling resistant to alkalis and acids universally applicable for assembly, screwing and as lubricant against seizure and protection of screw threads, link tools, rotary axes, etc.
Content: 0.25 kilograms (€80.00 / 1 kilograms)
Prices incl. VAT;
Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, various colors
Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD
Prices incl. VAT;
QuickFist Tension Tie-down Belt
We all know the rubber cords used on bike racks to carry stuff. Rusty hooks, worn by sunlight and rain, dangerous handling and not really up to the job anyway - definitely unsuited for tie-down of cargo in a 4x4. An alternative is the tie-down belt produced by QuickFist, who are renowned for their quality load securing products. With a length of 965mm they are suitable for a variety of uses, from securing jerry cans, oxygen or gas bottles or other larger items that are often carried on expedition vehicles, 4x4s, quads/ATV, boats, recovery and emergency vehicles, etc. Their advantages over traditional roof rack straps/luggage spiders are manifold: no rust no rattling UV-resistant weatherproof extendable two different mounting options greater length (965mm strap) wider, so offering better hold (38mm) more robust (6mm thick rubber compound) Please note: The item has traces of storage.
Prices incl. VAT;
Nakatanenga First-Aid Bundle
Everything right at the Tip of your Fingers, even on the GO! This bundle is made up of our proven first aid bag and scissors . Both of which are highly versatile thanks to MOLLE on both the bag and the scissors. The high quality scissors are ideal for every emergency, e.g. plaster. The package contains small emergency scissors, but the pouch also fits full-size scissors. This small but important instrument fits in all the places. The bag is the improved version of our well known first-aid kit. Slight alterations in size and looks and an already included base plate make it the ideal companion for every journey. The back of the baseplate also offers a MOLLE struckture allowing you to attatch it to our highly enticipated backpack. Material: 100% Nylon Delivery:1x first aid bag orange1x scissors incl. gray bag
Prices incl. VAT;
Universal handle in black or gray
Universal handle - Provides support where support is lacking - sizes M and L This handle is a great solution where support is lacking. The attachment is simple, ingenious and stable. The holder can be attached with rivets or screws wherever an additional or new handle is required. Areas of application can be, for example: inner car door, as an entry aid on the vehicle, on airline rails, on crates, on the Cargobear and on other roof racks as well as a replacement or supplement for all carrying systems. The handle can also be used for your interior fittings, e.g. for flaps and drawers. Due to the flexible material, the handle is very space-saving and prevents the often painful ‘getting caught’. Material: 100% nylon with PE reinforcements Dimensions size M: Total length: 18 cm Width: 5 cm Distance between the mounting holes: 13 cm Recommended mounting hole spacing: approx. 12 cm Size L dimensions: Overall length: 23,5 cm Width: 5 cm Distance between the mounting holes: 18,5 cm Recommended mounting hole spacing: 16,5 cm Available in: black and grey Set of 1 and 4 Mounting material is NOT included in the scope of delivery! Please note: The item supplied may differ slightly from the photo shown.
Prices incl. VAT;
Tailgate organizer with 5 MOLLE pockets, for all Land Rover Defenders with rear doors
Tailgate Organizer – Rear door organization system for the Land Rover Defender Where to put all the small items in your travel vehicle? First aid kit, multimeter, work gloves, winch controls, tire repair kit, etc. – everything needs to be stored neatly. The Tailgate Organizer makes use of the often unused space on the tailgate of the Defender. Several pockets with MOLLE (MOdular Lightweight Load-carrying Equipment) attachment system provide space for a wide range of accessories and keep them within easy reach. Advantages of MOLLE laser cut over sewn MOLLE: Significantly lighter due to less sewing material Quick attachment and removal of e.g. a first aid bag Flatter design prevents unnecessary snagging Secure hold without slipping Further information on the MOLLE system can be found in the downloads. Scope of delivery: 1x MOLLE multi-purpose bag 1x MOLLE multi-purpose bag, open 2x MOLLE multi-purpose bag, large 1x MOLLE universal bag, large 1x stainless steel fastening material 1x MOLLE tailgate organizer base plate Optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga, we only use materials with a 100% nylon PU coating for all textile items. Unlike PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for all types of plastics and are even used in food and cosmetics. However, they accumulate in the environment and, due to their molecular structure, are suspected of acting like the body's own hormones. This is highly toxicologically questionable and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-friendly alternatives such as nylon PU for the coating of textile products. Fastening: To fasten the cover, it must be removed. Our dismantling tool is perfect for this. Then holes must be drilled, the cover put back on and finally screwed into place. In order to ensure the best possible availability of this product, the selection of bags supplied may vary in exceptional cases. If an individual bag is not available, it will be replaced by a model of at least the same quality. We are also happy to produce customised versions of our Tailgate Organiser. Available on request in coyote, grey and orange with laser-cut MOLLE panels. If you would like a different design, please enquire using the contact form.
Prices incl. VAT;
Overhead console Land Rover Defender - transverse
Roof console Land Rover Defender - transverse Roof console for Land Rover Defender 90/110/130, is mounted crosswise to the direction of travel, provides a DIN slot and storage space. The Nakatanenga switch bundle with 7 on/off switches is suitable for mounting in the DIN slot.Not suitable for vehicles with sunroof.Available in grey and black.
Prices incl. VAT;
Cable Organizer
Practical cable organizer More and more technical devices accompany us in everyday life. Since these need electricity, we have not only the devices but also all the necessary cables (charging cable for mobile phones, laptops and tablets, cables for a power bank, etc.). No matter how neatly you roll the cables together and no matter how carefully you are there, after only a short time the cables in the bags, suitcases, rucksacks, stonework or the like are loosened again, knotted or simply untraceable. Once opened, the cables meander their way, criss-crosses and are often kinked. This often causes a cable break. And this not only causes loading errors or data transmission errors, but is also a source of danger. This cable organizer helps. It has room for 4 cables which you can finally keep neatly. You can also remove the individual buckles if necessary. On each buckle an elastic band is attached to fix the cables. In addition to the four storage options is a 5x5 cm hook tape. The Organizer can be easily rolled up and then fixed with the Velcro piece on the back loop tape. You can also attach the Organizer in full length to another Velcro surface. Dimensions (length x width):37x5 cm Material:100% nylonCable holder: Dekal / ITW / Duraflex
Prices incl. VAT;
Nakatanenga Mirror Bag for Sun Visor Organiser
Nakatanenga Mirror Bag for Sun Visor Organiser This mirror pocket can be attached to the sun visor organiser. On the inside of the mirror pocket is a large fleece area to which a mirror can be attached with Velcro dots. On the outside there are 4 Velcro points with which you can place the mirror bag on the sun visor organiser as required.The mirror with Velcro dots, which is available separately from us, can thus be folded up or down. Even when the sun visor is folded down, you will not be irritated by reflections from the sun or other reflections.The mirror is not included. Picture may differ.
Prices incl. VAT;
Alu-Box Pro
Light, stable & weatherproof for every application Model Volume Measurements inside Measurements outside ABP-T010 10 litres 370x200x140 mm 400x230x156 mm ABP-T019 19 litres 500x220x170 mm 530x250x186 mm ABP-S020 20 litres 360x260x180 mm 390x290x200 mm ABP-S023 23 litres 470x350x140 mm 500x380x160 mm ABP-A029 29 litres 360x260x310 mm 390x290x330 mm ABP-A042 42 litres 550x350x220 mm 580x380x240 mm ABP-S060 60 litres 550x350x310 mm 580x380x330 mm ABP-A073 73 litres 550x350x350 mm 580x380x400 mm ABP-S056 56 litres 1220x240x190 mm 1250x270x210 mm ABP-S067 67 litres 550x550x220 mm 580x580x240 mm ABP-S074 74 litres 750x550x180 mm 780x580x200 mm ABP-A081 81 litres 750x350x310 mm 780x380x330 mm ABP-S115 115 litres 550x550x380 mm 580x580x400 mm ABP-S120 120 litres 750x550x280 mm 780x580x300 mm ABP-A134 134 litres 850x450x350 mm 880x480x370 mm ABP-A157 157 litres 750x550x380 mm 780x580x400 mm ABP-S175 175 litres 550x550x580 mm 580x580x600 mm ABP-S163 163 litres 1150x350x380 mm 1180x380x400 mm ABP-S192 192 litres 2100x480x190 mm 2130x510x220 mm ABP-S198 198 litres 1130x720x225 mm 1180x770x260 mm ABP-A240 240 litres 750x550x580 mm 780x580x600 mm ABP-S350 350 litres 1150x750x400 mm 1180x780x420 mm ABP-A415 415 litres 1150x750x480 mm 1180x780x500 mm ABP-S550 550 litres 1150x750x630 mm 1180x780x650 mm ABP-S690 690 litres 1150x750x730 mm 1180x780x750 mm Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina. Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!
Prices incl. VAT;
Tool Roll Spice 2, incl. 7 spice containers
Spice Up Your Life – with our Tool Roll Spice 2! Who remembers the olden days when all you got around the campfire was skewered hot dogs and marshmallow s’mores? Well, those days are gone and good riddance. Today’s campers, be they male or female, working a BBQ grill or a Dutch oven, would be completely lost without a pinch of hand-plucked tarragon for the chicken, argentine dry-rub on the steak or oak-smoked Pimentón de la Vera in a vegan chilli. As we said before, who wants to go back to hot dogs and s’mores? So what’s different from our original Tool Roll Spice? The brand-new Spice 2 measures 45 x 30 cm when opened and offers not only space for 7 included spice and herb containers but also safe, clean and practical storage for other essential cooking utensils. Two mesh-pockets will stow your cutlery, knives, garlic press, condiment tubes and much more. Other than that, our hot roll is just as easily rolled up, unrolled, carried or hung from a hook as its predecessor. The sturdy and easy-to-clean materials, the hand-sewn seams and the strong nylon straps with the snap-lock buckles take care of that. The Spice 2’s airy mesh pockets are opened and closed by YKK quality zippers. They can take spills and leakages and are as easily washed as they are quick to dry. The Tool Roll Spice 2 is your perfect culinary companion for a camping trip alone, with a mate or a date, in your backpack, on your bicycle, the bike or the 4x4. Includes:1 x base plate with two mesh pockets7 x PET containers without content (60 ml)2x suction cups Note: Replacement spice containers can be reordered as a pack of 10 here. No more decanting when trying out new spice varieties.You can find the Tool Roll Spice with 14 spice containers here. Dimensions:Opened: 45x30 cmClosed: appx.30x18x6 cm Please note that the container lids can vary in color from the ones pictured here. Please note: The PETlings are NOT dishwasher safe! Please rinse by hand after use.Further keywords for this item: toolroll, tool-roll, tool roll
Prices incl. VAT;
Vehicle Organization & Load Security – Safety and Efficiency for Off-Road Adventures
For off-road enthusiasts, keeping equipment organized and loads properly secured is absolutely essential. Our "Vehicle Organization & Load Security" category provides everything you need to maintain a tidy vehicle and ensure cargo stays firmly in place. With the right products, you can eliminate chaos, enhance safety, and maximize interior space efficiency – whether preparing for short trips or extended expeditions.
Benefits of Proper Organization & Load Security Off-Road
Structured organization and reliable load securing are critical for several reasons:
✔ Safety First – Prevents loose items from becoming dangerous projectiles during sudden stops or rough terrain
✔ Time Efficiency – Saves frustration by keeping gear accessible and easy to locate
✔ Damage Prevention – Protects both your equipment and vehicle interior from shifting impacts
✔ Space Optimization – Makes the most of your vehicle's storage capacity
Our Product Selection
We offer specialized solutions designed for off-road challenges:
🔹 Storage Solutions – Durable cases, bags, and organizers for tools and personal items
🔹 Load Securing – Straps, nets, and tie-down systems that withstand rough trails
🔹 Compartment Dividers – Cargo barriers and trunk organizers for orderly storage
🔹 Speciality Mounts – Secure systems for fuel cans, spare tires, and large equipment
🔹 Interior Organizers – Console organizers, cupholders, and seat back systems
Pro Tips for Optimal Organization
-
Keep frequently used items within easy reach
-
Assign dedicated storage spots for all equipment
-
Invest in rugged, off-road-rated products
-
Always double-check load security before departure
Why Choose Our Solutions?
Our off-road shop carefully selects products that meet the demands of serious adventurers. We prioritize quality, functionality, and user-friendly designs to keep you organized and safe on any terrain.
Pro Tip: Proper organization and load security don't just reduce stress – they significantly improve safety across all driving conditions.
Explore our organization solutions today and prepare your off-road vehicle for adventure!