Seats

Seat covers for Suzuki Jimny II (model: GJ, from year of manufacture: 2018 / model: HJ) Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. available in these variants:  Driver's side Passenger side Rear seat  Driver and passenger side Driver's side, front passenger's side and rear seat Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Seat covers for Suzuki Jimny I Small as ever, but even more oho! That's the Jimny. Not an SUV for transporting the kiddies to riding school, but a real off-roader with a Twingo-like footprint of just 3.65 x 1.65 metres. Since the Jimny is a traditional workhorse with limited interior space, every cubic centimetre of free space counts. Off-the-shelf seat covers can't do this, they slip, overhang, get stuck or snag on moving parts. That's why our high-quality covers are tailor-made and fit extremely precisely thanks to individual Velcro straps. This also applies to the perfectly fitting headrest protector. As one of the last true off-road vehicles, the Jimny is particularly popular with foresters, fishermen, farmers and other 4x4 enthusiasts. Dirt, dust and animal residues therefore stay better on the easy-to-clean 100% nylon slipcovers than in the seats themselves. But of course our covers can do even more: in addition to a generous zipped pocket, high-quality Molle on the back of the front seat covers ensures clever expandability of the storage space. For example, our practical bag set can be attached here, the first aid scissors can be stowed within easy reach or the tensioning and fastening strap set can be used to secure everything that otherwise likes to fly around. Of course, the covers are also airbag-compatible. Available for: Suzuki Jimny I  Set consists of: Driver's side, passenger's side Colour: Coyote, Black,  Material: 100% Nylonwashable 30-60° C Made in EU! Please select the desired variant and colour. You will find illustrated instructions (for Jimny GJ/HJ) in the downloads below. This article was designed in our in-house tailor shop. A dedicated team and short distances allow for continuous quality control and further development of our textile products. And if you already have a tailor's workshop in house, then it is easy to also accept customer change requests, special designs, suggestions and proposals for improvement at short notice and to implement them as far as possible. Mail or phone call is all it takes! And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Seat cover for driver and passenger side Ineos Grenadier The Ineos Grenadier is designed to be the successor to the old Land Rover Defender. You won’t find any gimmicks in the Grenadier but loads of functionality and robust simplicity. This principle also applies to the front seats by Recaro. While they provide a lot of support off-road, they are at the same time quite comfortable, both when driving and when getting in or out of the car. Regardless whether you choose the Recaros with leather or fabric upholstery, our tailor-made protective covers for the Grenadier’s front seats function as a sturdy and versatile "battle suit" for tough off-road missions, long overland trips and everyday life. Our textile designers opted for a three-part concept to achieve a perfect fit for the compact, straight-lined seats. Apart from the headrest, there are two separate covers for backrest and seat. This allows for a firm and precise fit without bulging or sliding. The covers are fastened with straps (or velcro) and tucked into the gaps for an even tighter fit, both at the outer edges and between the backrest and the seat. The materials - 1000D nylon 6.6 and breathable nylon mesh - are hard-wearing and, above all, easy to clean. MOLLE on the headrest, backrest and the front edge of the seat offers additional storage space to attach equipment and accessory pouches. Cut-outs in the covers guarantee that operation, functionality and safety technology (e.g. airbags) remain unrestricted. Our seat covers are available in black with plain-colored MESH inserts. Material: nylon, PU-coated This item was designed in our in-house textile workshop. A dedicated team and short distances guarantee constant quality control and continuous development of our textile products. Thanks to our in-house workshop, we can easily accommodate customer requests for changes, custom designs and ideas for improvement at short notice. We promise to implement your requirements whenever possible. An email or phone call is all it takes! And by the way: at Nakatanenga we exclusively use materials with a 100% nylon PU coating for textile products. In contrast to PVC, nylon PU (polyurethane) is free from harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers and are even used in food and cosmetics. However, due to their molecular nature, they accumulate in the environment and are suspected of acting like endogenous hormones. From a toxicological point of view this is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically sound and health-friendly alternatives such as nylon PU.  

Practical folding console for Land Rover Defender The vehicle seat in the Land Rover Defender can be easily folded backwards with this folding console, thus providing access to the battery and the electrical components located under the seat.   All seats with 405 mm track spacing, e.g. Scheelmann, König, Recaro etc., can be fitted. The original running rails of the Defender are still used and retain their function without restriction. They are attached to the original points on the running rails using the mounting kit supplied. The folding console is also a seat rail extension by approx. 35 mm, a combination with our seat rail extensions is not advisable (although technically feasible).   These seat consoles are made of ceramic-blasted stainless steel. The height of the console is 31 mm at the front and 61 mm at the rear.Suitable for: Land Rover Defender 90/110/130   Scope of delivery: 1 set for 1 seat    

TREKFINDER cover profile for Mercedes V-Class/Vito/Viano - for factory fitted floor rails - textured surface. Available in: 1 m or in 10 cm steps (free choice of length) - max. 25m in one piece Please note:As there are so many different possible applications and we do not know your requirements, we need you to provide us with the info on which length and which denomination of profiles you need.Please enter your cutting requirements in the free field at the end of the ordering process. Individual cuts are excluded from exchange. made of high-quality, flexible and black rubber - does NOT fit on classic airline rails!!! especially and exclusively for Mercedes models: V-Class, Vito, Viano perfect adhesion due to U-construction on the underside easy mounting by clipping into the floor rail the possible max. length as one piece is 25 m flexible, high-quality black rubber anti-slip surface with wave structure Note: the return of any remaining quantities is NOT possible!!!!

Trekfinder cover profile for airline rails Available in: 1 m or in 10 cm increments (free choice of length) - max. 25m in one piece. Please note:As there are so many different applications and we do not know your requirements, we need you to provide us with the info on which length and which denomination of profiles you need.Please enter your cutting requirements in the free field at the end of the order process. Individual cuts are excluded from exchange. Airline rails would have to be invented if they didn't already exist. Few lashing systems are as flexible, stable and secure at the same time. Anyone who has ever had to lash large, uneven and sometimes delicate objects in the hold or on the roof knows what we are talking about. So how do you make airline rails even better? With rubber profiles from Trekfinder, which are clicked into the rails. It's easy, quick and holds firmly and securely. With their 3.5 mm height, the rubber profiles are hardly noticeable and first and foremost prevent dirt and dust from penetrating into unused rails or rail sections. This is particularly important on loading areas or trailers, because dirty rails make it much more difficult to attach fittings and lashing points. Of course, the same applies to snow and ice in winter and who always wants to scrape the airline rails free? On top of that, the covers ensure better load securing when the load is placed directly on them. In the case of roof racks, they also reduce wind noise, and when the rails are attached to the side, nothing gets caught by vegetation off-road. A lot of performance for little money. The cover profiles are available in 30 mm width. Note: DOES NOT FIT THE V-Class/Vito/Viano

Everyone knows the bits and pieces lying around in the car that are not needed all the time, but still have to be close at hand. But where do you put it? The HIDDEN BAG storage compartment for the original seats of the Land Rover Defender is easily attached via four high-tensile Velcro and fleece surfaces under the driver or front passenger seat. The bag offers storage space for the 1000 little things of everyday life such as pens, screwdrivers, pliers, multitool, flashlight, batteries for a remote control, USB stick with workshop manual, spare glasses, air pressure tester, charging cable and much more. But even a small digicam, a GPS device or other valuables are quickly out of sight and accessible. The traveler may stow a second passport, unauthorized radio or copies of their travel documents. The scope of delivery includes 4 self-adhesive and tensile Velcro strips for the seat side. The bag is attached to these Velcro strips via its 4 fleece surfaces (see pictures below). The storage bag fits perfectly under the Defender seat and, thanks to Velcro surfaces, can be easily removed and transported using the attached carrying strap. The high-quality fabric made of polyamide 6.6 ensures that the bag remains breathable and moisture and dirt are still strongly repelled. The bag has a small mesh compartment on the upper inside and a detachable intermediate compartment on the lower inside. The stowage bag was manufactured according to US military standards (MIL-SPEC) and our specifications by Delta Bags in Germany. Dimensions: 18x33x8 cmWeight: 260 g Fastening via four tensile Velcro and fleece surfaces each (included in delivery):