Das könnte Sie auch interessieren
Great conversion kit for the 2nd row of seats With the introduction of Td4 Puma models from MY2007 onwards, Defenders featured not only a new engine and drive train but also significant changes to the interior. Due to new safety regulations, second row seats and their mounting points required a new layout. Consequently, more recent Td4 back seats will not fit when restoring or converting older pre-2007 models. Our conversion kit enables you to install post-2007 second row seats in pre-2007 110 Defender Station Wagons. The back seat mounting kit contains a mid-crossmember, two second row seat supports, chassis bracket fixing kits and two adapted front panels for the rear wheel arches. All parts are galvanized.
Prices incl. VAT;
Defender 110 side storage box When you go on big adventures, every bit of storage space is useful, which means that not a single centimeter should be wasted.Our storage box makes ideal use of dead space. Made entirely of stainless steel and powder-coated in black, the storage box is waterproof, lockable and the ideal container for salvage materials, rubber boots or tools. The box fits perfectly for the sides of the Land Rover Defender 110 (2-door), but also for e.g. a motorhome, long-distance vehicle or other expedition vehicles.The open flap is held at a 90-degree angle by two thin steel cables and thus serves as a storage surface for water canisters, for example, or even as a small breakfast table. Supplied complete with 2 keys and all fixing materials.Internal dimensions of the side storage box: 465 mm x 285 mm x 335 mmPlease note:This side storage box can only be installed in front of the rear wheel arch in hardtop versions. Merkblatt Edelstahl und Rost
Prices incl. VAT;
Ähnliche Artikel
Wide angle stainless steel second row door stay brackets for Defender 110/130 CC Wide angle stainless steel second row door stay brackets for Defender 110 and 130 CC rear doors. Allow to open the door further (up to 95°). This does not only make entering and leaving the rear seats easier, also gives more access for drawers if rear bench is not fitted, e.g. for a cooler (we can make such drawers to order!). Also without any additional rear furniture loading is greatly facilitated. DIY fitting possible! Only takes a few minutes, the supplied fitting instrucions leave no questions open! No drilling of additional holes, bracket fits to original mountings. Set (for two doors) is supplied with stainless steel fixings, washers, anti-seize copper paste and fitting instructions. The kit fits all MY Defenders (TDi, TD5, TD4).
Prices incl. VAT;
Nakatanenga Mudguard Stowage Box The Nakatanenga mudguard storage boxes for the Land Rover Defender 90 / 110 are very light thanks to the case construction used, yet robust - an ideal combination for any touring vehicle! In addition, there are very high-quality fittings with field-proven performance features and great flexibility in design. We offer the box in two lengths as standard. The short design (630 mm length) is intended for the right-hand side of the Defender. The long design (900 mm length) is used on the left-hand side. If an internal roll cage is fitted, a mudguard stowage box can still be fitted: no modification is necessary on the right side due to the tank connection, the short box is used on the left. If you need special lengths or already have other installations in the rear of the vehicle, please contact us - we can work out very flexible solutions for you! Dimensions:Length: either 630 or 900 mmTotal height: 450 mm (400 mm storage box, 50 mm lid)Depth: 225 mm (at the foot 340 mm)Weight: approx.11 kg The aluminium profiles, which allow rivet-free assembly and thus ensure an elegant appearance, are anodised, the corners are made of a robust grey plastic. The surfaces of the storage box are made of 6.9 mm thick birch plywood, a material that combines high robustness and low weight. It is made with a D4 adhesive which, according to DIN/EN204, is "suitable for indoor use with frequent and long-lasting exposure to run-off water or condensation". The wood is colour-coated with PVC and covered with a counterfoil. We currently offer the mudguard stowage box in four colour variants: black grey slate grey petrol Other colours are available on request - please enquire: blue sky blue navy night blue red bordeaux orange yellow white silver aluminium stucco The hinges and latches come from the professional audio and studio sector and are designed for years of use under the toughest conditions. The butterfly latches keep the box securely closed without rattling, while sturdy uprights prevent the lid from folding shut - your fingers will thank you! An optional padlock can be fitted on request. Delivery includes mounting material. Existing screw holes on the vehicle are used for mounting, these must be drilled on the box. An adapter is supplied for wheel housings from model year 2007. This item is bulky goods.
Prices incl. VAT;
Nakatanenga storage compartment HIDDEN BAG for Defender, attached under the driver or passenger seat
Hidden pocket for Defender seats - clever storage space for travelling & everyday life
Everyone knows the bits and pieces lying around in the car that are not needed all the time, but still have to be close at hand. But where do you put it?The HIDDEN BAG storage compartment for the original seats of the Land Rover Defender is easily attached via four high-tensile Velcro and fleece surfaces under the driver or front passenger seat. The bag offers storage space for the 1000 little things of everyday life such as pens, screwdrivers, pliers, multitool, flashlight, batteries for a remote control, USB stick with workshop manual, spare glasses, air pressure tester, charging cable and much more. But even a small digicam, a GPS device or other valuables are quickly out of sight and accessible. The traveler may stow a second passport, unauthorized radio or copies of their travel documents.
The scope of delivery includes 4 self-adhesive and tensile Velcro strips for the seat side. The bag is attached to these Velcro strips via its 4 fleece surfaces (see pictures below). The storage bag fits perfectly under the Defender seat and, thanks to Velcro surfaces, can be easily removed and transported using the attached carrying strap. The high-quality fabric made of polyamide 6.6 ensures that the bag remains breathable and moisture and dirt are still strongly repelled. The bag has a small mesh compartment on the upper inside and a detachable intermediate compartment on the lower inside.
The stowage bag was manufactured according to US military standards (MIL-SPEC) and our specifications by Delta Bags in Germany.
Dimensions: 18x33x8 cm
Weight: 260 g
Fastening via four tensile Velcro and fleece surfaces each (included in delivery):